[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
aleksey.maksimov at it-kb.ru
aleksey.maksimov at it-kb.ru
Mon Jul 25 08:38:56 EDT 2016
telnet kom-ad01-vm31.holding.com 54321 = success connection
telnet ::1 54321
Trying ::1...
telnet: connect to address ::1: Network is unreachable
(ipv6 on my server disabled)
25.07.2016, 15:35, "Simone Tiraboschi" <stirabos at redhat.com>:
> On Mon, Jul 25, 2016 at 2:15 PM, <aleksey.maksimov at it-kb.ru> wrote:
>> # ss -plutn
>>
>> Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
>>
>> udp UNCONN 0 0 *:111 *:* users:(("rpcbind",pid=827,fd=6))
>> udp UNCONN 0 0 *:161 *:* users:(("snmpd",pid=1609,fd=6))
>> udp UNCONN 0 0 127.0.0.1:323 *:* users:(("chronyd",pid=795,fd=1))
>> udp UNCONN 0 0 *:959 *:* users:(("rpcbind",pid=827,fd=7))
>> udp UNCONN 0 0 127.0.0.1:25375 *:* users:(("snmpd",pid=1609,fd=8))
>> udp UNCONN 0 0 127.0.0.1:25376 *:* users:(("cmapeerd",pid=2056,fd=5))
>> udp UNCONN 0 0 127.0.0.1:25393 *:* users:(("cmanicd",pid=2278,fd=3))
>> udp UNCONN 0 0 :::111 :::* users:(("rpcbind",pid=827,fd=9))
>> udp UNCONN 0 0 :::959 :::* users:(("rpcbind",pid=827,fd=10))
>> tcp LISTEN 0 128 *:2381 *:* users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
>> tcp LISTEN 0 128 *:111 *:* users:(("rpcbind",pid=827,fd=8))
>> tcp LISTEN 0 5 *:54322 *:* users:(("ovirt-imageio-d",pid=753,fd=3))
>> tcp LISTEN 0 128 *:22 *:* users:(("sshd",pid=1606,fd=3))
>> tcp LISTEN 0 100 127.0.0.1:25 *:* users:(("master",pid=1948,fd=13))
>> tcp LISTEN 0 128 *:2301 *:* users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
>> tcp LISTEN 0 30 *:16514 *:* users:(("libvirtd",pid=10688,fd=13))
>> tcp LISTEN 0 128 127.0.0.1:199 *:* users:(("snmpd",pid=1609,fd=9))
>> tcp LISTEN 0 128 :::111 :::* users:(("rpcbind",pid=827,fd=11))
>> tcp LISTEN 0 5 :::54321 :::* users:(("vdsm",pid=11077,fd=23))
>
> vdsm is properly bind over ipv6.
>
> Can you please check if you can connect to vdsm with:
> telnet kom-ad01-vm31.holding.com 54321
> and with
> telnet ::1 54321
> ?
>
>> tcp LISTEN 0 30 :::16514 :::* users:(("libvirtd",pid=10688,fd=14))
>>
>> 25.07.2016, 15:11, "Simone Tiraboschi" <stirabos at redhat.com>:
>>> On Mon, Jul 25, 2016 at 2:03 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>> Yes.
>>>>
>>>> # ping $(python -c 'import socket; print(socket.gethostname())')
>>>>
>>>> PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
>>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 time=0.030 ms
>>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 time=0.015 ms
>>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 time=0.011 ms
>>>> ^C
>>>> --- KOM-AD01-VM31.holding.com ping statistics ---
>>>> 3 packets transmitted, 3 received, 0% packet loss, time 2001ms
>>>> rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms
>>>>
>>>> but...
>>>
>>> and the output of
>>> ss -plutn
>>>
>>>> # vdsClient -s 0 getVdsCaps
>>>>
>>>> Traceback (most recent call last):
>>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>>> code, message = commands[command][0](commandArgs)
>>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>> return self.__send(self.__name, args)
>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>> verbose=self.__verbose
>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>> return self.single_request(host, handler, request_body, verbose)
>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>> self.send_content(h, request_body)
>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>> connection.endheaders(request_body)
>>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>> self._send_output(message_body)
>>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>> self.send(msg)
>>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>> self.connect()
>>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>> raise err
>>>> error: [Errno 101] Network is unreachable
>>>>
>>>> 25.07.2016, 14:58, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>> Ok.
>>>>>
>>>>> 1) I stopped and disabled the service NetworkManager
>>>>> # systemctl stop NetworkManager
>>>>> # systemctl disable NetworkManager
>>>>>
>>>>> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in ifcfg-* file.
>>>>>
>>>>> 3) Reboot server
>>>>>
>>>>> 4) Try deploy oVirt HE 4 and I get the same error
>>>>>
>>>>> [ INFO ] Creating Volume Group
>>>>> [ INFO ] Creating Storage Domain
>>>>> [ INFO ] Creating Storage Pool
>>>>> [ INFO ] Connecting Storage Pool
>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
>>>>> [ INFO ] Stage: Clean up
>>>>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
>>>>> [ INFO ] Stage: Pre-termination
>>>>> [ INFO ] Stage: Termination
>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy
>>>>> Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>>>>>
>>>>> What ideas further?
>>>>>
>>>>> 25.07.2016, 13:06, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>> On Mon, Jul 25, 2016 at 11:54 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>> What am I supposed to do for successfully deploy ovirt 4 ?
>>>>>>> Any ideas ?
>>>>>>
>>>>>> Can you please try to explicitly configure your DNS with nameserver
>>>>>> under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>>>>>> the interface you are going to use?
>>>>>>
>>>>>>> 25.07.2016, 12:47, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>>> "Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface you used to create the management bridge on?"
>>>>>>>>
>>>>>>>> Yes. Of course
>>>>>>>>
>>>>>>>> 25.07.2016, 12:27, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>> On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>>>>>>>>> <piotr.kliczewski at gmail.com> wrote:
>>>>>>>>>> This could be the issue here as well as for BZ #1358530
>>>>>>>>>>
>>>>>>>>>> On Mon, Jul 25, 2016 at 10:53 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>> Could this be due to the fact that the ovirt installer has changed network configuration files (ifcfg-*, resolv.conf) ?
>>>>>>>>>>> After the error in ovirt installation process I see from resolv.conf disappeared on my DNS servers entry and now the server is unable to resolve names.
>>>>>>>>>
>>>>>>>>> So it could be related to https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>>>>>>>>
>>>>>>>>> Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>>>>>>>> interface you used to create the management bridge on?
>>>>>>>>> Can you please try the workaround described here
>>>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>>>>>>>>>
>>>>>>>>>>> 25.07.2016, 11:26, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>> On Mon, Jul 25, 2016 at 10:22 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>> # vdsClient -s 0 getVdsCaps
>>>>>>>>>>>>>
>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>>>>>>>>>>>> code, message = commands[command][0](commandArgs)
>>>>>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>>>>>>>>>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>>>>>>>>>>> return self.__send(self.__name, args)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>>>>>>>>>>> verbose=self.__verbose
>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>>>>>>>>>>> return self.single_request(host, handler, request_body, verbose)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>>>>>>>>>>> self.send_content(h, request_body)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>>>>>>>>>>> connection.endheaders(request_body)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>>>>>>>>>>> self._send_output(message_body)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>>>>>>>>>>> self.send(msg)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>>>>>>>>>>> self.connect()
>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>>>>>>>>>>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>>>>>>>>>>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>>>>>>>>>>> raise err
>>>>>>>>>>>>> error: [Errno 101] Network is unreachable
>>>>>>>>>>>>
>>>>>>>>>>>> Yaniv, can you please take also a look to this one?
>>>>>>>>>>>> it's exactly the opposite of https://bugzilla.redhat.com/1358530
>>>>>>>>>>>> Here the jsonrpcclient works but not the xmlrpc one.
>>>>>>>>>>>>
>>>>>>>>>>>>> 25.07.2016, 11:17, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>> On Mon, Jul 25, 2016 at 7:51 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>> Simone, there is something interesting in the vdsm.log?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> For what I saw the issue is not related to the storage but to the network.
>>>>>>>>>>>>>> ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>>>>>>>>>>>>> from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>>>>>>>>>>>>>> this happens also when the setup asks to create the lockspace volume.
>>>>>>>>>>>>>> It seams that in your case the xmlrpc client could not connect vdsm on
>>>>>>>>>>>>>> the localhost.
>>>>>>>>>>>>>> It could be somehow related to:
>>>>>>>>>>>>>> https://bugzilla.redhat.com/1358530
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Can you please try executing
>>>>>>>>>>>>>> sudo vdsClient -s 0 getVdsCaps
>>>>>>>>>>>>>> on that host?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 22.07.2016, 19:36, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>>>>>>>>>>> Simone, thanks for link.
>>>>>>>>>>>>>>>> vdsm.log attached
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 22.07.2016, 19:28, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 5:59 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>>>> Thank you for your response, Simone.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Log attached.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> It seams it comes from VDSM, can you please attach also vdsm.log?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I don't use ovirt-engine-appliance because I have not found "how-to" for ovirt-engine-appliance deployment in hosted engine configuration.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> yum install ovirt-engine-appliance
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Then follow the instruction here:
>>>>>>>>>>>>>>>>> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 22.07.2016, 17:09, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>>>>>> Hi Aleksey,
>>>>>>>>>>>>>>>>>>> Can you please attach hosted-engine-setup logs?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 3:46 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hello oVirt guru`s !
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I have problem with initial deploy of ovirt 4.0 hosted engine.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> My environment :
>>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>> * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with
>>>>>>>>>>>>>>>>>>>> multipathd) to storage HP 3PAR 7200
>>>>>>>>>>>>>>>>>>>> * On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)
>>>>>>>>>>>>>>>>>>>> * On 3PAR storage I created 2 LUNs for oVirt.
>>>>>>>>>>>>>>>>>>>> - First LUN for oVirt Hosted Engine VM (60GB)
>>>>>>>>>>>>>>>>>>>> - Second LUN for all other VMs (2TB)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> # multipath -ll
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 3par-vv1 (360002ac0000000000000001b0000cec9) dm-0 3PARdata,VV
>>>>>>>>>>>>>>>>>>>> size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>>>>>> |- 2:0:1:1 sdd 8:48 active ready running
>>>>>>>>>>>>>>>>>>>> |- 3:0:0:1 sdf 8:80 active ready running
>>>>>>>>>>>>>>>>>>>> |- 2:0:0:1 sdb 8:16 active ready running
>>>>>>>>>>>>>>>>>>>> `- 3:0:1:1 sdh 8:112 active ready running
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 3par-vv2 (360002ac000000000000000160000cec9) dm-1 3PARdata,VV
>>>>>>>>>>>>>>>>>>>> size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>>>>>> |- 2:0:0:0 sda 8:0 active ready running
>>>>>>>>>>>>>>>>>>>> |- 3:0:0:0 sde 8:64 active ready running
>>>>>>>>>>>>>>>>>>>> |- 2:0:1:0 sdc 8:32 active ready running
>>>>>>>>>>>>>>>>>>>> `- 3:0:1:0 sdg 8:96 active ready running
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> My steps on first server (initial deploy of ovirt 4.0 hosted engine):
>>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> # systemctl stop NetworkManager
>>>>>>>>>>>>>>>>>>>> # systemctl disable NetworkManager
>>>>>>>>>>>>>>>>>>>> # yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
>>>>>>>>>>>>>>>>>>>> # yum -y install epel-release
>>>>>>>>>>>>>>>>>>>> # wget
>>>>>>>>>>>>>>>>>>>> http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>>>>>> -P /tmp/
>>>>>>>>>>>>>>>>>>>> # yum install ovirt-hosted-engine-setup
>>>>>>>>>>>>>>>>>>>> # yum install screen
>>>>>>>>>>>>>>>>>>>> # screen -RD
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ...in screen session :
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> # hosted-engine --deploy
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>> in configuration process I chose "fc" as storage type for oVirt hosted
>>>>>>>>>>>>>>>>>>>> engine vm and select 60GB LUN...
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --== CONFIGURATION PREVIEW ==--
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>> Firewall manager : iptables
>>>>>>>>>>>>>>>>>>>> Gateway address : 10.1.0.1
>>>>>>>>>>>>>>>>>>>> Host name for web application : KOM-AD01-OVIRT1
>>>>>>>>>>>>>>>>>>>> Storage Domain type : fc
>>>>>>>>>>>>>>>>>>>> Host ID : 1
>>>>>>>>>>>>>>>>>>>> LUN ID :
>>>>>>>>>>>>>>>>>>>> 360002ac0000000000000001b0000cec9
>>>>>>>>>>>>>>>>>>>> Image size GB : 40
>>>>>>>>>>>>>>>>>>>> Console type : vnc
>>>>>>>>>>>>>>>>>>>> Memory size MB : 4096
>>>>>>>>>>>>>>>>>>>> MAC address : 00:16:3e:77:1d:07
>>>>>>>>>>>>>>>>>>>> Boot type : cdrom
>>>>>>>>>>>>>>>>>>>> Number of CPUs : 2
>>>>>>>>>>>>>>>>>>>> ISO image (cdrom boot/cloud-init) :
>>>>>>>>>>>>>>>>>>>> /tmp/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Can I ask why you prefer/need to manually create a VM installing from
>>>>>>>>>>>>>>>>>>> a CD instead of using the ready-to-use ovirt-engine-appliance?
>>>>>>>>>>>>>>>>>>> Using the appliance makes the setup process a lot shorted and more comfortable.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> CPU Type : model_Penryn
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>> and get error after step "Verifying sanlock lockspace initialization"
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network
>>>>>>>>>>>>>>>>>>>> is unreachable
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Clean up
>>>>>>>>>>>>>>>>>>>> [ INFO ] Generating answer file
>>>>>>>>>>>>>>>>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Termination
>>>>>>>>>>>>>>>>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>>>>>>>>>>>>>>>>>>>> please check the issue, fix and redeploy
>>>>>>>>>>>>>>>>>>>> Log file is located at
>>>>>>>>>>>>>>>>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.log
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Interestingly
>>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>> If I try to deploy hosted-engine v3.6, everything goes well in the same
>>>>>>>>>>>>>>>>>>>> configuration !! :
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction setup
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Package installation
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring libvirt
>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring VDSM
>>>>>>>>>>>>>>>>>>>> [ INFO ] Starting vdsmd
>>>>>>>>>>>>>>>>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring the management bridge
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Volume Group
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Domain
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Pool
>>>>>>>>>>>>>>>>>>>> [ INFO ] Connecting Storage Pool
>>>>>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.lockspace' ...
>>>>>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.lockspace' created successfully
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.metadata' ...
>>>>>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.metadata' created successfully
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating VM Image
>>>>>>>>>>>>>>>>>>>> [ INFO ] Destroying Storage Pool
>>>>>>>>>>>>>>>>>>>> [ INFO ] Start monitoring domain
>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring VM
>>>>>>>>>>>>>>>>>>>> [ INFO ] Updating hosted-engine configuration
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction commit
>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Closing up
>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating VM
>>>>>>>>>>>>>>>>>>>> You can now connect to the VM with the following command:
>>>>>>>>>>>>>>>>>>>> /bin/remote-viewer vnc://localhost:5900
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> What could be the problem?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Users mailing list
>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list