[ovirt-users] disk not bootable

Fri Jul 1 22:33:32 UTC 2016

Nir,

Ok I ran another test and this one I moved from NFS domain to iSCSI and
stop working than I moved it back and still unable to run... Windows VM
is saying "no available boot disk"
VM: Win7-Test
Host: Zeta
Info as requested:  http://pastebin.com/1fSi3auz

Now here is an example of one that I migrated from the NFS domain to the
iscsi domain and stop working:
VM: Win7-QA5
Host: Alpha
Info as requested:  http://pastebin.com/BXqLFqZt

The same VM I moved it back to the NFS domain and boot it just fine:
VM: Win7-QA5
Host: Zeta
Info as requested:  http://pastebin.com/7BA97CsC

-- 
Fernando Fuentes
ffuentes at txweather.org
http://www.txweather.org

On Fri, Jul 1, 2016, at 03:22 PM, Nir Soffer wrote:
> Fernando,
> 
> These logs do not contain the libvirt xml.
> 
> I want to see the part that start like this:
> 
> Thread-17656::INFO::2016-07-01 23:17:33,845::vm::2032::virt.vm::(_run)
> vmId=`f66da2b0-0f71-490b-a57e-eceb9be9cade`::<?xml version="1.0"
> encoding="utf-8"?>
> <domain type="kvm" xmlns:ovirt="http://ovirt.org/vm/tune/1.0">
>         <name>test-iscsi</name>
>         <uuid>f66da2b0-0f71-490b-a57e-eceb9be9cade</uuid>
> ...
> 
> The most important part is the devices sections showing the disks:
> 
>                 <disk device="disk" snapshot="no" type="block">
>                         <address bus="0" controller="0" target="0"
> type="drive" unit="0"/>
>                         <source
> dev="/rhev/data-center/f9374c0e-ae24-4bc1-a596-f61d5f05bc5f/5f35b5c0-17d7-4475-9125-e97f1cdb06f9/images/8f61b697-b3e4-4f63-8951-bdf9b6b39192/f409cc48-8248-4239-a4ea-66b0b1084416"/>
>                         <target bus="scsi" dev="sda"/>
>                         <serial>8f61b697-b3e4-4f63-8951-bdf9b6b39192</serial>
>                         <boot order="1"/>
>                         <driver cache="none" error_policy="stop"
> io="native" name="qemu" type="qcow2"/>
>                 </disk>
> 
> Please try to find the logs (probably already rotated to vdsm.log.N.xz)
> containing the xml for this vm when running on nfs and iscsi.
> 
> Nir
> 
> On Fri, Jul 1, 2016 at 10:31 PM, Fernando Fuentes <ffuentes at darktcp.net>
> wrote:
> > Nir.
> >
> > Thank you for your reply.
> >
> > Attached is the vdsm log of the hosts that power on the vm in this
> > example.
> >
> > VM name is Win7-QA5
> > vdsm_alpha.log was the host that started the VM when it got transfer to
> > the iscsi domain.
> > vdsm_zeta.log was the host that started the VM when it got transfer back
> > to the nfs domain.
> >
> > I included everything for trouble shooting purposes.
> >
> > Also here is the engine log that talks about it as well:
> > http://pastebin.com/3cHBNMcg
> >
> > Hope this helps.
> >
> > Regards,
> > --
> > Fernando Fuentes
> > ffuentes at txweather.org
> > http://www.txweather.org
> >
> > On Fri, Jul 1, 2016, at 01:58 PM, Nir Soffer wrote:
> >> On Fri, Jul 1, 2016 at 7:58 PM, Fernando Fuentes <ffuentes at darktcp.net>
> >> wrote:
> >> > Pavel,
> >> >
> >> > Thanks for your reply, But thats not the problem
> >> > The disk is active and is set with to bootable. The problem presents it
> >> > self only if I move Windows VM DIsks.
> >> > All my Linux VM Disk's move across storage domains just fine.
> >> >
> >> > As a matter of fact I moved the disk back to the original nfs domain and
> >> > it started working.
> >> > Could this be a bug?
> >>
> >> Can you share the vdsm log showing startup of the vm when the disk is on
> >> on nfs storage domain (vm starts) and iscsi storage domain (vm fail)?
> >>
> >> The most interesting part in the logs is the libvirt xml describing the
> >> vm.
> >>
> >> Nir
> >>
> >> > Regards,
> >> >
> >> > --
> >> > Fernando Fuentes
> >> > ffuentes at txweather.org
> >> > http://www.txweather.org
> >> >
> >> > On Fri, Jul 1, 2016, at 11:33 AM, Pavel Gashev wrote:
> >> >> Fernando,
> >> >>
> >> >> One from VM disks have to have bootable flag.
> >> >> See http://www.ovirt.org/images/wiki/Add_Virtual_Disk.png?1454370862
> >> >>
> >> >>
> >> >> On 01/07/16 19:09, "users-bounces at ovirt.org on behalf of Fernando
> >> >> Fuentes" <users-bounces at ovirt.org on behalf of ffuentes at darktcp.net>
> >> >> wrote:
> >> >>
> >> >> Team,
> >> >>
> >> >> After I successfully copy my template from one storage to another I was
> >> >> able to move my VM disks from my nfs domain to my iscsi domain.
> >> >> My linux vms which are basic template (No template) moved just fine and
> >> >> boot just fine.
> >> >> On the other hand my windows vms (Template) once moved they cant boot.
> >> >> Complaining that there is no bootable disk available.
> >> >> What is going on?
> >> >>
> >> >> oVirt 3.6.6
> >> >> Hosts Centos 6.6  x86_64
> >> >> iSCSI Domain on TrueNAS Attached via ovirt.
> >> >>
> >> >>
> >> >> --
> >> >> Fernando Fuentes
> >> >> ffuentes at txweather.org
> >> >> http://www.txweather.org
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users at ovirt.org
> >> >> http://lists.ovirt.org/mailman/listinfo/users
> >> >>
> >> >>
> >> > _______________________________________________
> >> > Users mailing list
> >> > Users at ovirt.org
> >> > http://lists.ovirt.org/mailman/listinfo/users