[ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable

[Matt .]

No problem I checked it out and applied it, no solution it seems.

2016-07-21 12:14 GMT+02:00 Simone Tiraboschi <stirabos at redhat.com>:
> On Thu, Jul 21, 2016 at 12:09 PM, Matt . <yamakasi.014 at gmail.com> wrote:
>> OK, I did a deploy from the engine and the Hosted is "Not Active" and
>
> Yes, sorry, I forgot to mention that.
> We have an open bug about re-activating an hosted-engine host from the
> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600
> Connecting to the host and exiting the maintenance mode from there is
> the temporary solution.
>
>> Engine HA is empty on 4.0.1
>>
>> 2016-07-21 11:58 GMT+02:00 Matt . <yamakasi.014 at gmail.com>:
>>> True, but you can up an IP on any device in that case because you know
>>> what you are doing.
>>>
>>> I think that this can be finetuned, or at least multiple IPs would be
>>> nice as I now need to add one IP from my vrrp setup, so if there is a
>>> failover.... or I need to take down the second switch I'm also done.
>>>
>>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . <yamakasi.014 at gmail.com> wrote:
>>>>> OK, I will check this laster on, as I was having issues with the
>>>>> deploy from the GUI before as nothing really happened, I thought it
>>>>> was a bug on the first 4.0 release ?
>>>>>
>>>>> I think this should be investigated, the whole deployment as it would
>>>>> be good to have the possibility to list some GW's in case you use
>>>>> failover.
>>>>>
>>>>> I was even thinking of setting the engine IP there, should be working
>>>>> as good as also.
>>>>
>>>> Not really since the agent is pinging also when the engine VM is down
>>>> due to maintenance.
>>>>
>>>>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . <yamakasi.014 at gmail.com> wrote:
>>>>>>> OK, I already thought that but where is this saved as I don't have any
>>>>>>> rights as root to the ha_agent folder on the HE storage ?
>>>>>>
>>>>>> It's not a folder: it's a tar file directly saved over a VDSM volume.
>>>>>> Editing it's a bit tricky.
>>>>>>
>>>>>>> In worst case scenario, how would i be able to deploy a new hosted
>>>>>>> engine from a hosted engine ? This sounds undoable to me and also
>>>>>>> unwanted as the HE is OK so far.
>>>>>>
>>>>>> With a 4.0 engine, when you choose to deploy a new host from the
>>>>>> webadmin or from the rest API you can also choose to deploy it as an
>>>>>> hosted-engine host if the engine has been deployed with hosted-engine.
>>>>>> In this case, if I'm not wrong, you can also specify a different gateway value.
>>>>>>
>>>>>>
>>>>>>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>>>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . <yamakasi.014 at gmail.com> wrote:
>>>>>>>>> Even when I change that on each host before I do a new deploy it still
>>>>>>>>> uses the old GW address.
>>>>>>>>
>>>>>>>> If you deploy additional hosts with the CLI utility, each new host
>>>>>>>> will be deployed consuming the answerfile generated by the first host
>>>>>>>> and saved on the shared storage.
>>>>>>>> You have to manually tweak there if you to avoid.
>>>>>>>>
>>>>>>>> Another smarted option is to deploy additional HE host from the
>>>>>>>> webadmin interface.
>>>>>>>>
>>>>>>>>
>>>>>>>>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>>>>>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . <yamakasi.014 at gmail.com> wrote:
>>>>>>>>>>> OK, I tried to edit the answerfiles on the other hosts to use another
>>>>>>>>>>> IP but it doesn't ping and still uses the old GW address.
>>>>>>>>>>>
>>>>>>>>>>> Any idea ?
>>>>>>>>>>
>>>>>>>>>> The gateway address is saved under
>>>>>>>>>> /etc/ovirt-hosted-engine/hosted-engine.conf
>>>>>>>>>> on each host.
>>>>>>>>>>
>>>>>>>>>>> 2016-07-20 22:27 GMT+02:00 Matt . <yamakasi.014 at gmail.com>:
>>>>>>>>>>>> Maybe it's a good idea to be able to add multiple addresses it should
>>>>>>>>>>>> ping in order of response.
>>>>>>>>>>>>
>>>>>>>>>>>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola <sbonazzo at redhat.com>:
>>>>>>>>>>>>> Il 20/Lug/2016 10:06 PM, "Matt ." <yamakasi.014 at gmail.com> ha scritto:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm trying to add a host to a HE installation but my gateway is not
>>>>>>>>>>>>>> pingable. It's a floating IP which is usable but not pingable in this
>>>>>>>>>>>>>> case.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> During the first install of the HE I could give any IP to ping and I
>>>>>>>>>>>>>> used a source IP for the floating GW address.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> What can I do to get around this as the network is OK, even when the
>>>>>>>>>>>>>> GW is not pingable.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I think that gw not pingable will be interpreted as network failure by the
>>>>>>>>>>>>> agent and will lower the score of the hosts.
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Any idea is welcome!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users