[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
Simone Tiraboschi
stirabos at redhat.com
Mon Jul 25 12:35:14 UTC 2016
On Mon, Jul 25, 2016 at 2:15 PM, <aleksey.maksimov at it-kb.ru> wrote:
> # ss -plutn
>
> Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
>
> udp UNCONN 0 0 *:111 *:* users:(("rpcbind",pid=827,fd=6))
> udp UNCONN 0 0 *:161 *:* users:(("snmpd",pid=1609,fd=6))
> udp UNCONN 0 0 127.0.0.1:323 *:* users:(("chronyd",pid=795,fd=1))
> udp UNCONN 0 0 *:959 *:* users:(("rpcbind",pid=827,fd=7))
> udp UNCONN 0 0 127.0.0.1:25375 *:* users:(("snmpd",pid=1609,fd=8))
> udp UNCONN 0 0 127.0.0.1:25376 *:* users:(("cmapeerd",pid=2056,fd=5))
> udp UNCONN 0 0 127.0.0.1:25393 *:* users:(("cmanicd",pid=2278,fd=3))
> udp UNCONN 0 0 :::111 :::* users:(("rpcbind",pid=827,fd=9))
> udp UNCONN 0 0 :::959 :::* users:(("rpcbind",pid=827,fd=10))
> tcp LISTEN 0 128 *:2381 *:* users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
> tcp LISTEN 0 128 *:111 *:* users:(("rpcbind",pid=827,fd=8))
> tcp LISTEN 0 5 *:54322 *:* users:(("ovirt-imageio-d",pid=753,fd=3))
> tcp LISTEN 0 128 *:22 *:* users:(("sshd",pid=1606,fd=3))
> tcp LISTEN 0 100 127.0.0.1:25 *:* users:(("master",pid=1948,fd=13))
> tcp LISTEN 0 128 *:2301 *:* users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
> tcp LISTEN 0 30 *:16514 *:* users:(("libvirtd",pid=10688,fd=13))
> tcp LISTEN 0 128 127.0.0.1:199 *:* users:(("snmpd",pid=1609,fd=9))
> tcp LISTEN 0 128 :::111 :::* users:(("rpcbind",pid=827,fd=11))
> tcp LISTEN 0 5 :::54321 :::* users:(("vdsm",pid=11077,fd=23))
vdsm is properly bind over ipv6.
Can you please check if you can connect to vdsm with:
telnet kom-ad01-vm31.holding.com 54321
and with
telnet ::1 54321
?
> tcp LISTEN 0 30 :::16514 :::* users:(("libvirtd",pid=10688,fd=14))
>
> 25.07.2016, 15:11, "Simone Tiraboschi" <stirabos at redhat.com>:
>> On Mon, Jul 25, 2016 at 2:03 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>> Yes.
>>>
>>> # ping $(python -c 'import socket; print(socket.gethostname())')
>>>
>>> PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 time=0.030 ms
>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 time=0.015 ms
>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 time=0.011 ms
>>> ^C
>>> --- KOM-AD01-VM31.holding.com ping statistics ---
>>> 3 packets transmitted, 3 received, 0% packet loss, time 2001ms
>>> rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms
>>>
>>> but...
>>
>> and the output of
>> ss -plutn
>>
>>> # vdsClient -s 0 getVdsCaps
>>>
>>> Traceback (most recent call last):
>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>> code, message = commands[command][0](commandArgs)
>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>> return self.__send(self.__name, args)
>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>> verbose=self.__verbose
>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>> return self.single_request(host, handler, request_body, verbose)
>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>> self.send_content(h, request_body)
>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>> connection.endheaders(request_body)
>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>> self._send_output(message_body)
>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>> self.send(msg)
>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>> self.connect()
>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>> raise err
>>> error: [Errno 101] Network is unreachable
>>>
>>> 25.07.2016, 14:58, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>> Ok.
>>>>
>>>> 1) I stopped and disabled the service NetworkManager
>>>> # systemctl stop NetworkManager
>>>> # systemctl disable NetworkManager
>>>>
>>>> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in ifcfg-* file.
>>>>
>>>> 3) Reboot server
>>>>
>>>> 4) Try deploy oVirt HE 4 and I get the same error
>>>>
>>>> [ INFO ] Creating Volume Group
>>>> [ INFO ] Creating Storage Domain
>>>> [ INFO ] Creating Storage Pool
>>>> [ INFO ] Connecting Storage Pool
>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
>>>> [ INFO ] Stage: Clean up
>>>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
>>>> [ INFO ] Stage: Pre-termination
>>>> [ INFO ] Stage: Termination
>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy
>>>> Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>>>>
>>>> What ideas further?
>>>>
>>>> 25.07.2016, 13:06, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>> On Mon, Jul 25, 2016 at 11:54 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>> What am I supposed to do for successfully deploy ovirt 4 ?
>>>>>> Any ideas ?
>>>>>
>>>>> Can you please try to explicitly configure your DNS with nameserver
>>>>> under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>>>>> the interface you are going to use?
>>>>>
>>>>>> 25.07.2016, 12:47, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>> "Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface you used to create the management bridge on?"
>>>>>>>
>>>>>>> Yes. Of course
>>>>>>>
>>>>>>> 25.07.2016, 12:27, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>> On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>>>>>>>> <piotr.kliczewski at gmail.com> wrote:
>>>>>>>>> This could be the issue here as well as for BZ #1358530
>>>>>>>>>
>>>>>>>>> On Mon, Jul 25, 2016 at 10:53 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>> Could this be due to the fact that the ovirt installer has changed network configuration files (ifcfg-*, resolv.conf) ?
>>>>>>>>>> After the error in ovirt installation process I see from resolv.conf disappeared on my DNS servers entry and now the server is unable to resolve names.
>>>>>>>>
>>>>>>>> So it could be related to https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>>>>>>>
>>>>>>>> Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>>>>>>> interface you used to create the management bridge on?
>>>>>>>> Can you please try the workaround described here
>>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>>>>>>>>
>>>>>>>>>> 25.07.2016, 11:26, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>> On Mon, Jul 25, 2016 at 10:22 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>> # vdsClient -s 0 getVdsCaps
>>>>>>>>>>>>
>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>>>>>>>>>>> code, message = commands[command][0](commandArgs)
>>>>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>>>>>>>>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>>>>>>>>>> return self.__send(self.__name, args)
>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>>>>>>>>>> verbose=self.__verbose
>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>>>>>>>>>> return self.single_request(host, handler, request_body, verbose)
>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>>>>>>>>>> self.send_content(h, request_body)
>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>>>>>>>>>> connection.endheaders(request_body)
>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>>>>>>>>>> self._send_output(message_body)
>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>>>>>>>>>> self.send(msg)
>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>>>>>>>>>> self.connect()
>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>>>>>>>>>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>>>>>>>>>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>>>>>>>>>> raise err
>>>>>>>>>>>> error: [Errno 101] Network is unreachable
>>>>>>>>>>>
>>>>>>>>>>> Yaniv, can you please take also a look to this one?
>>>>>>>>>>> it's exactly the opposite of https://bugzilla.redhat.com/1358530
>>>>>>>>>>> Here the jsonrpcclient works but not the xmlrpc one.
>>>>>>>>>>>
>>>>>>>>>>>> 25.07.2016, 11:17, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>> On Mon, Jul 25, 2016 at 7:51 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>> Simone, there is something interesting in the vdsm.log?
>>>>>>>>>>>>>
>>>>>>>>>>>>> For what I saw the issue is not related to the storage but to the network.
>>>>>>>>>>>>> ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>>>>>>>>>>>> from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>>>>>>>>>>>>> this happens also when the setup asks to create the lockspace volume.
>>>>>>>>>>>>> It seams that in your case the xmlrpc client could not connect vdsm on
>>>>>>>>>>>>> the localhost.
>>>>>>>>>>>>> It could be somehow related to:
>>>>>>>>>>>>> https://bugzilla.redhat.com/1358530
>>>>>>>>>>>>>
>>>>>>>>>>>>> Can you please try executing
>>>>>>>>>>>>> sudo vdsClient -s 0 getVdsCaps
>>>>>>>>>>>>> on that host?
>>>>>>>>>>>>>
>>>>>>>>>>>>>> 22.07.2016, 19:36, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>>>>>>>>>> Simone, thanks for link.
>>>>>>>>>>>>>>> vdsm.log attached
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 22.07.2016, 19:28, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 5:59 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>>> Thank you for your response, Simone.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Log attached.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> It seams it comes from VDSM, can you please attach also vdsm.log?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I don't use ovirt-engine-appliance because I have not found "how-to" for ovirt-engine-appliance deployment in hosted engine configuration.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> yum install ovirt-engine-appliance
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Then follow the instruction here:
>>>>>>>>>>>>>>>> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 22.07.2016, 17:09, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>>>>> Hi Aleksey,
>>>>>>>>>>>>>>>>>> Can you please attach hosted-engine-setup logs?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 3:46 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hello oVirt guru`s !
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I have problem with initial deploy of ovirt 4.0 hosted engine.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> My environment :
>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>> * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with
>>>>>>>>>>>>>>>>>>> multipathd) to storage HP 3PAR 7200
>>>>>>>>>>>>>>>>>>> * On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)
>>>>>>>>>>>>>>>>>>> * On 3PAR storage I created 2 LUNs for oVirt.
>>>>>>>>>>>>>>>>>>> - First LUN for oVirt Hosted Engine VM (60GB)
>>>>>>>>>>>>>>>>>>> - Second LUN for all other VMs (2TB)
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> # multipath -ll
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 3par-vv1 (360002ac0000000000000001b0000cec9) dm-0 3PARdata,VV
>>>>>>>>>>>>>>>>>>> size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>>>>> |- 2:0:1:1 sdd 8:48 active ready running
>>>>>>>>>>>>>>>>>>> |- 3:0:0:1 sdf 8:80 active ready running
>>>>>>>>>>>>>>>>>>> |- 2:0:0:1 sdb 8:16 active ready running
>>>>>>>>>>>>>>>>>>> `- 3:0:1:1 sdh 8:112 active ready running
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 3par-vv2 (360002ac000000000000000160000cec9) dm-1 3PARdata,VV
>>>>>>>>>>>>>>>>>>> size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>>>>> |- 2:0:0:0 sda 8:0 active ready running
>>>>>>>>>>>>>>>>>>> |- 3:0:0:0 sde 8:64 active ready running
>>>>>>>>>>>>>>>>>>> |- 2:0:1:0 sdc 8:32 active ready running
>>>>>>>>>>>>>>>>>>> `- 3:0:1:0 sdg 8:96 active ready running
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> My steps on first server (initial deploy of ovirt 4.0 hosted engine):
>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> # systemctl stop NetworkManager
>>>>>>>>>>>>>>>>>>> # systemctl disable NetworkManager
>>>>>>>>>>>>>>>>>>> # yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
>>>>>>>>>>>>>>>>>>> # yum -y install epel-release
>>>>>>>>>>>>>>>>>>> # wget
>>>>>>>>>>>>>>>>>>> http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>>>>> -P /tmp/
>>>>>>>>>>>>>>>>>>> # yum install ovirt-hosted-engine-setup
>>>>>>>>>>>>>>>>>>> # yum install screen
>>>>>>>>>>>>>>>>>>> # screen -RD
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ...in screen session :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> # hosted-engine --deploy
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>> in configuration process I chose "fc" as storage type for oVirt hosted
>>>>>>>>>>>>>>>>>>> engine vm and select 60GB LUN...
>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --== CONFIGURATION PREVIEW ==--
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>> Firewall manager : iptables
>>>>>>>>>>>>>>>>>>> Gateway address : 10.1.0.1
>>>>>>>>>>>>>>>>>>> Host name for web application : KOM-AD01-OVIRT1
>>>>>>>>>>>>>>>>>>> Storage Domain type : fc
>>>>>>>>>>>>>>>>>>> Host ID : 1
>>>>>>>>>>>>>>>>>>> LUN ID :
>>>>>>>>>>>>>>>>>>> 360002ac0000000000000001b0000cec9
>>>>>>>>>>>>>>>>>>> Image size GB : 40
>>>>>>>>>>>>>>>>>>> Console type : vnc
>>>>>>>>>>>>>>>>>>> Memory size MB : 4096
>>>>>>>>>>>>>>>>>>> MAC address : 00:16:3e:77:1d:07
>>>>>>>>>>>>>>>>>>> Boot type : cdrom
>>>>>>>>>>>>>>>>>>> Number of CPUs : 2
>>>>>>>>>>>>>>>>>>> ISO image (cdrom boot/cloud-init) :
>>>>>>>>>>>>>>>>>>> /tmp/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Can I ask why you prefer/need to manually create a VM installing from
>>>>>>>>>>>>>>>>>> a CD instead of using the ready-to-use ovirt-engine-appliance?
>>>>>>>>>>>>>>>>>> Using the appliance makes the setup process a lot shorted and more comfortable.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> CPU Type : model_Penryn
>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>> and get error after step "Verifying sanlock lockspace initialization"
>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network
>>>>>>>>>>>>>>>>>>> is unreachable
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Clean up
>>>>>>>>>>>>>>>>>>> [ INFO ] Generating answer file
>>>>>>>>>>>>>>>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Termination
>>>>>>>>>>>>>>>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>>>>>>>>>>>>>>>>>>> please check the issue, fix and redeploy
>>>>>>>>>>>>>>>>>>> Log file is located at
>>>>>>>>>>>>>>>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.log
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Interestingly
>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>> If I try to deploy hosted-engine v3.6, everything goes well in the same
>>>>>>>>>>>>>>>>>>> configuration !! :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction setup
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Package installation
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring libvirt
>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring VDSM
>>>>>>>>>>>>>>>>>>> [ INFO ] Starting vdsmd
>>>>>>>>>>>>>>>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring the management bridge
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Volume Group
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Domain
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Pool
>>>>>>>>>>>>>>>>>>> [ INFO ] Connecting Storage Pool
>>>>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.lockspace' ...
>>>>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.lockspace' created successfully
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.metadata' ...
>>>>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.metadata' created successfully
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating VM Image
>>>>>>>>>>>>>>>>>>> [ INFO ] Destroying Storage Pool
>>>>>>>>>>>>>>>>>>> [ INFO ] Start monitoring domain
>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring VM
>>>>>>>>>>>>>>>>>>> [ INFO ] Updating hosted-engine configuration
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction commit
>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Closing up
>>>>>>>>>>>>>>>>>>> [ INFO ] Creating VM
>>>>>>>>>>>>>>>>>>> You can now connect to the VM with the following command:
>>>>>>>>>>>>>>>>>>> /bin/remote-viewer vnc://localhost:5900
>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> What could be the problem?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Users mailing list
>>>>>>>>>> Users at ovirt.org
>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list