[ovirt-users] i meet some problems of ovirt3.6.2

[plysan]

Hi 赵亮

no, i cannot find any screenshot that you said.
are you sure you have edited the vms and set them as highly available ?

Cheers

2016-03-31 14:23 GMT+08:00 赵亮1 <zhao.liang1 at puxinasset.com>:

> Hi plysan
> Thanks for your help!
> As you can see , i have opened the VM HA (i had show you the screenshot in
> the last mail), and some relevant settings i have checked(cluster settings
> of resilience). I don't kown where is the problem .
>
>
> ------------------ Original ------------------
> *From: * "plysan"<plysab at gmail.com>;
> *Date: * Thu, Mar 31, 2016 12:37 PM
> *To: * "赵亮1"<zhao.liang1 at puxinasset.com>;
> *Cc: * "Users at ovirt.org List"<users at ovirt.org>;
> *Subject: * Re: [ovirt-users] i meet some problems of ovirt3.6.2
>
> Hi Zhao,
>
> This is not a bug. you reboot the host without letting ovirt engine
> knowing it, ovirt engine will think there must be something wrong going on
> with the host, and IIRC will trigger some mechanism to fence the host(ssh
> soft fence, power management, etc). In this circumstances, If the vms are
> not ha vms, these vms will not auto restart on other normal hosts.
>
> You can edit the vms as highly available to make the vm auto reboot on
> other host.
>
> 2016-03-31 11:55 GMT+08:00 赵亮1 <zhao.liang1 at puxinasset.com>:
>
>> Hi plysan,
>>
>> I had reboot the host manually from the host itself(i did it many times),
>> and  i had setup the power management succssefully(i used the DELL IDRAC
>> ---idrac8), the problem that i meet is a bug? or this is new feature?
>>
>>
>> ------------------ Original ------------------
>> *From: * "plysan"<plysab at gmail.com>;
>> *Date: * Thu, Mar 31, 2016 11:10 AM
>> *To: * "Phillip Bailey"<phbailey at redhat.com>;
>> *Cc: * "zhao.liang1 at puxinasset.com"<zhao.liang1 at puxinasset.com>; "users"<
>> users at ovirt.org>;
>> *Subject: * Re: [ovirt-users] i meet some problems of ovirt3.6.2
>>
>> Hi Zhao,
>>
>> Did you reboot the host manually from the host itself (outside of ovirt
>> ui)? Have you setup the host with power management in ovirt ui?
>>
>> Cheers
>>
>> 2016-03-31 9:13 GMT+08:00 Phillip Bailey <phbailey at redhat.com>:
>>
>>> Hi Zhao,
>>>
>>> Have you configured the migration policy? It's possible that your VM is
>>> currently set to not allow migration. See the "Resilience Policy Settings
>>> Explained" section of this document:
>>> http://www.ovirt.org/documentation/admin-guide/administration-guide/.
>>>
>>> -Phillip Bailey
>>>
>>> On Wed, Mar 30, 2016 at 4:19 AM, zhao.liang1 at puxinasset.com <
>>> zhao.liang1 at puxinasset.com> wrote:
>>>
>>>> hi,all , i'm a chinese user of ovirt3.6.2  ,here are my problems
>>>>
>>>> i have 3 hosts, they all work fine , there are 10 vms run on it. i want
>>>> test if vm will still work when i stop a host( the vm is running on this
>>>> host),but when i reboot the host , the vm is down , but, you know it should
>>>> be running on other host, i dont know what happened.
>>>>
>>>> ------------------------------
>>>> zhao.liang1 at puxinasset.com
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160331/763a1952/attachment-0001.html>