[ovirt-users] vioscsi.sys BSOD with Win 7

[Tomas Jelinek]

Hi Ladi,

do you know if the upstream virtio drivers are correctly signed?
In particular:
http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools-iso-3.6-3.fc23.noarch.rpm

If yes, any idea what can be the issue Cam faces?

thank you,
Tomas

----- Original Message -----
> From: "Arman Khalatyan" <arm2arm at gmail.com>
> To: "Cam Mac" <iucounu at gmail.com>
> Cc: "Tomas Jelinek" <tjelinek at redhat.com>, "users" <users at ovirt.org>
> Sent: Tuesday, May 10, 2016 9:19:49 PM
> Subject: Re: [ovirt-users] vioscsi.sys BSOD with Win 7
> 
> Same bsod was with win2008 server, in order to fix it we changed nics to
> e1000 and disks to IDE. Now it boots w/o trouble.
> Am 10.05.2016 7:43 nachm. schrieb "Cam Mac" <iucounu at gmail.com>:
> 
> > Hi Tomas,
> >
> > The install went ok, but Windows complains:
> >
> > "File: \windows\system32\drivers\vioscsi.sys
> > status: 0xc0000428
> > Windows cannot verify the digital signature for this file"
> >
> > Regards,
> >
> > Campbell
> >
> > On Tue, May 10, 2016 at 6:29 PM, Cam Mac <iucounu at gmail.com> wrote:
> >
> >> Hi Tomas,
> >>
> >> Thanks, I will test that later tonight and let you know.
> >>
> >> Regards,
> >>
> >> Cam
> >>
> >> On Tue, May 10, 2016 at 3:28 PM, Tomas Jelinek <tjelinek at redhat.com>
> >> wrote:
> >>
> >>> Hi,
> >>>
> >>> please try to install this guest tools:
> >>>
> >>> http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools-iso-3.6-3.fc23.noarch.rpm
> >>>
> >>> Also please make sure you point windows to the correct driver in the
> >>> sub-directory for w7
> >>>
> >>> Tomas
> >>>
> >>> ----- Original Message -----
> >>> > From: "Cam Mac" <iucounu at gmail.com>
> >>> > To: users at ovirt.org
> >>> > Sent: Monday, May 9, 2016 7:28:57 PM
> >>> > Subject: [ovirt-users] vioscsi.sys BSOD with Win 7
> >>> >
> >>> > Hi,
> >>> >
> >>> > I'm running oVirt 3.6.3.4-1.el7.centos and when I install a Win 7
> >>> guest VM,
> >>> > using VirtIO disk, networking etc, it goes through the install process
> >>> ok,
> >>> > but blue screens upon boot with a vioscsi.sys error (attached). I have
> >>> tried
> >>> > the official version ovirt-guest-tools-iso 3.6.0 0.2_master.fc22, as
> >>> well as
> >>> > some earlier and later versions. I am using a PXE boot method with a
> >>> Windows
> >>> > deployment server, which has the drivers from the oVirt tools ISO
> >>> installed
> >>> > (indeed, it picks up the drive and networking and I can see it
> >>> installing
> >>> > the drivers). I have tried with the generic IDE and rtl8139 config on
> >>> the
> >>> > guest, and it also fails with the same vioscsi.sys error after
> >>> rebooting
> >>> > upon finishing installation even though I'm using IDE as the disk
> >>> driver.
> >>> >
> >>> > I have uploaded a win 7 x64 ISO and tried installing that, and it
> >>> loads the
> >>> > VirtIO viostor driver (using the method at:
> >>> >
> >>> https://www.ovirt.org/documentation/how-to/virtual-machines/create-a-windows-7-virtual-machine/
> >>> > ), and even manages to partition the disks, but fails to install on
> >>> the disk
> >>> > (screenshot attached).
> >>> >
> >>> > I've tried temporarily removing the vioscsi files from the install
> >>> server as
> >>> > a last resort, but as expected it fails to install properly, though I
> >>> > thought it used the viostor driver instead.
> >>> >
> >>> > Thanks for any help.
> >>> >
> >>> > Regards,
> >>> >
> >>> > Cam
> >>> >
> >>> > _______________________________________________
> >>> > Users mailing list
> >>> > Users at ovirt.org
> >>> > http://lists.ovirt.org/mailman/listinfo/users
> >>> >
> >>>
> >>
> >>
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
>