[ovirt-users] iSCSI

[Budur Nagaraju]

Here is the output of of the commands  /proc/scsi/scsi and blkid


http://pastebin.com/GgL61Wcu

On Tue, Sep 20, 2016 at 8:56 PM, Budur Nagaraju <nbudoor at gmail.com> wrote:

> Noting more configuration ,if I configure openfiler  as a iSCSI Lun able
> to detect the lun , moment I configure EMC Lun unable to detect the Lun ID .
>
> Any other configs do I need to do in Host ? any comands to delete the old
> Lun ID ?
>
> .[root at pbuovirt3 ~]# cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 03 Id: 00 Lun: 00
>   Vendor: HP       Model: P410i            Rev: 2.00
>   Type:   RAID                             ANSI  SCSI revision: 00
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: HP       Model: LOGICAL VOLUME   Rev: 2.00
>   Type:   Direct-Access                    ANSI  SCSI revision: 05
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>   Vendor: Optiarc  Model: DVD RW AD-7561S  Rev: AH52
>   Type:   CD-ROM                           ANSI  SCSI revision: 05
> Host: scsi8 Channel: 00 Id: 00 Lun: 00
>   Vendor: DGC      Model: LUNZ             Rev: 3103
>   Type:   Direct-Access                    ANSI  SCSI revision: 04
> [root at pbuovirt3 ~]#
>
>
>
>
>
> On Tue, Sep 20, 2016 at 8:51 PM, Dan Yasny <dyasny at gmail.com> wrote:
>
>> It looks like iscsi does the job, bu multipath doesn't. What do you use
>> on the hosts? How is multipath.conf configured? Any other special
>> configuration you use?
>>
>> Also, can you paste /proc/scsi/scsi and blkid
>>
>> On Tue, Sep 20, 2016 at 11:18 AM, Budur Nagaraju <nbudoor at gmail.com>
>> wrote:
>>
>>>
>>> Below are the details,
>>>
>>> http://pastebin.com/aLBMH3Q6
>>>
>>> On Tue, Sep 20, 2016 at 8:27 PM, Dan Yasny <dyasny at gmail.com> wrote:
>>>
>>>> Try this on the host:
>>>>
>>>> iscsiadm -m discovery -t st -p 10.206.67.46
>>>> iscsiadm -m node -L all
>>>> iscsiadm -m node
>>>> iscsiadm -m session
>>>> multipath -ll
>>>>
>>>> and pastebin the output
>>>>
>>>> On Tue, Sep 20, 2016 at 10:54 AM, Budur Nagaraju <nbudoor at gmail.com>
>>>> wrote:
>>>>
>>>>> Yes I did that too but no luck :(
>>>>>
>>>>> Thanks,
>>>>> Nagaraju
>>>>>
>>>>>
>>>>> On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny <dyasny at gmail.com> wrote:
>>>>>
>>>>>> After you discover, did you also click the login button?
>>>>>>
>>>>>> On Tue, Sep 20, 2016 at 10:28 AM, Budur Nagaraju <nbudoor at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Below are the Steps,
>>>>>>>
>>>>>>> Under Storage Tab:New Domain -->Name>Domain
>>>>>>> Type-->Data/iSCSi-->Select the Host -->Discover the Targets ,
>>>>>>>
>>>>>>> After giving all the info able to detect the iSCSI targets but uable
>>>>>>> to get the Lun id ,below are the details of the logs.
>>>>>>>
>>>>>>>
>>>>>>> http://pastebin.com/ph1YSqhH
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Nagaraju
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 20, 2016 at 6:47 PM, Dan Yasny <dyasny at gmail.com> wrote:
>>>>>>>
>>>>>>>> Can you describe what you tried to do and how it failed?
>>>>>>>>
>>>>>>>> On Tue, Sep 20, 2016 at 5:54 AM, Budur Nagaraju <nbudoor at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> HI All,
>>>>>>>>>
>>>>>>>>> While configuring iSCSI LUN is not getting detected any documents
>>>>>>>>> to configure iSCSI in oVirt ?
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Nagaraju
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at ovirt.org
>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160920/f1fbb435/attachment-0001.html>