[ovirt-users] Good practices

[Yaniv Kaul]

On Mon, Aug 7, 2017 at 2:41 PM, Colin Coe <colin.coe at gmail.com> wrote:

> Hi
>
> I just thought that you'd do hardware RAID if you had the controller or
> JBOD if you didn't.  In hindsight, a server with 40Gbps NICs is pretty
> likely to have a hardware RAID controller.  I've never done JBOD with
> hardware RAID.  I think having a single gluster brick on hardware JBOD
> would be riskier than multiple bricks, each on a single disk, but thats not
> based on anything other than my prejudices.
>
> I thought gluster tiering was for the most frequently accessed files, in
> which case all the VMs disks would end up in the hot tier.  However, I have
> been wrong before...
>

The most frequent shards, may not be complete files.
Y.


> I just wanted to know where the OS was going as I didn't see it mentioned
> in the OP.  Normally, I'd have the OS on a RAID1 but in your case thats a
> lot of wasted disk.
>
> Honestly, I think Yaniv's answer was far better than my own and made the
> important point about having an arbiter.
>
> Thanks
>
> On Mon, Aug 7, 2017 at 5:56 PM, Moacir Ferreira <
> moacirferreira at hotmail.com> wrote:
>
>> Hi Colin,
>>
>>
>> I am in Portugal, so sorry for this late response. It is quite confusing
>> for me, please consider:
>>
>>
>> 1* - *What if the RAID is done by the server's disk controller, not by
>> software?
>>
>> 2 - For JBOD I am just using gdeploy to deploy it. However, I am not
>> using the oVirt node GUI to do this.
>>
>>
>> 3 - As the VM .qcow2 files are quite big, tiering would only help if
>> made by an intelligent system that uses SSD for chunks of data not for the
>> entire .qcow2 file. But I guess this is a problem everybody else has. So,
>> Do you know how tiering works in Gluster?
>>
>>
>> 4 - I am putting the OS on the first disk. However, would you do
>> differently?
>>
>>
>> Moacir
>>
>> ------------------------------
>> *From:* Colin Coe <colin.coe at gmail.com>
>> *Sent:* Monday, August 7, 2017 4:48 AM
>> *To:* Moacir Ferreira
>> *Cc:* users at ovirt.org
>> *Subject:* Re: [ovirt-users] Good practices
>>
>> 1) RAID5 may be a performance hit-
>>
>> 2) I'd be inclined to do this as JBOD by creating a distributed disperse
>> volume on each server.  Something like
>>
>> echo gluster volume create dispersevol disperse-data 5 redundancy 2 \
>> $(for SERVER in a b c; do for BRICK in $(seq 1 5); do echo -e
>> "server${SERVER}:/brick/brick-${SERVER}${BRICK}/brick \c"; done; done)
>>
>> 3) I think the above.
>>
>> 4) Gluster does support tiering, but IIRC you'd need the same number of
>> SSD as spindle drives.  There may be another way to use the SSD as a fast
>> cache.
>>
>> Where are you putting the OS?
>>
>> Hope I understood the question...
>>
>> Thanks
>>
>> On Sun, Aug 6, 2017 at 10:49 PM, Moacir Ferreira <
>> moacirferreira at hotmail.com> wrote:
>>
>>> I am willing to assemble a oVirt "pod", made of 3 servers, each with 2
>>> CPU sockets of 12 cores, 256GB RAM, 7 HDD 10K, 1 SSD. The idea is to use
>>> GlusterFS to provide HA for the VMs. The 3 servers have a dual 40Gb NIC and
>>> a dual 10Gb NIC. So my intention is to create a loop like a server triangle
>>> using the 40Gb NICs for virtualization files (VMs .qcow2) access and to
>>> move VMs around the pod (east /west traffic) while using the 10Gb
>>> interfaces for giving services to the outside world (north/south traffic).
>>>
>>>
>>> This said, my first question is: How should I deploy GlusterFS in such
>>> oVirt scenario? My questions are:
>>>
>>>
>>> 1 - Should I create 3 RAID (i.e.: RAID 5), one on each oVirt node, and
>>> then create a GlusterFS using them?
>>>
>>> 2 - Instead, should I create a JBOD array made of all server's disks?
>>>
>>> 3 - What is the best Gluster configuration to provide for HA while not
>>> consuming too much disk space?
>>>
>>> 4 - Does a oVirt hypervisor pod like I am planning to build, and the
>>> virtualization environment, benefits from tiering when using a SSD disk?
>>> And yes, will Gluster do it by default or I have to configure it to do so?
>>>
>>>
>>> At the bottom line, what is the good practice for using GlusterFS in
>>> small pods for enterprises?
>>>
>>>
>>> You opinion/feedback will be really appreciated!
>>>
>>> Moacir
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170807/4c9b187b/attachment-0001.html>