[ovirt-users] Network issues

[Bryan Sockel]

Need some help.  I was doing some work on one of my ovirt hosts, removed it 
from cluster, and re-added it to the cluster to bring it back into my 
working cluster.  I got a messege that my network's where out of sync.  I 
accidentally sync'd up my working network, now neither of my hosts will 
bring launch my hosted engine appliance.  While machines aren't currently 
mission critical, i do need to get these machines backup up and running.


The network configuration is supposed to be 6 nics forming a bond network, 
my vlan's hanging off that bond, including my ovirtmgmt network.




Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 0000:81:00.1 p1p2: Flow 
control is off for TX and off for RX
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 0000:81:00.1 p1p2: EEE 
is disabled
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: bond0: link status 
definitely up for interface p1p2, 1000 Mbps full duplex
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.102:  [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.20:  can't add bond0.20 to bridge DMZ: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.30:  can't add bond0.30 to bridge Devel: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.40:  can't add bond0.40 to bridge Lab: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.50:  can't add bond0.50 to bridge Workstation: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
Workstation:  device Workstation already exists; can't create bridge with 
the sa
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [FAILED]
Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: network.service: control 
process exited, code=exited status=1
Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: Failed to start LSB: 
Bring up/down networking.
-- Subject: Unit network.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit network.service has failed.


......


Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170210/b4489516/attachment.html>