[ovirt-users] Network issues

[Edward Haas]

It's unclear what is the current status of your network configuration,
perhaps you can share
your /etc/sysconfig/network-scripts content and the output of "ip addr".

Please also include the following information:
- What are the networks you expect to have on the host?
- The persisted VDSM config currently on the host:
/var/lib/vdsm/persistence/netconf

Thanks,
Edy.


On Fri, Feb 10, 2017 at 7:31 PM, Bryan Sockel <Bryan.Sockel at altn.com> wrote:

> Need some help.  I was doing some work on one of my ovirt hosts, removed
> it from cluster, and re-added it to the cluster to bring it back into my
> working cluster.  I got a messege that my network's where out of sync.  I
> accidentally sync'd up my working network, now neither of my hosts will
> bring launch my hosted engine appliance.  While machines aren't currently
> mission critical, i do need to get these machines backup up and running.
>
>
> The network configuration is supposed to be 6 nics forming a bond network,
> my vlan's hanging off that bond, including my ovirtmgmt network.
>
>
>
>
> Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 0000:81:00.1 p1p2:
> Flow control is off for TX and off for RX
> Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 0000:81:00.1 p1p2:
> EEE is disabled
> Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: bond0: link status
> definitely up for interface p1p2, 1000 Mbps full duplex
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up
> interface bond0.102:  [  OK  ]
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up
> interface bond0.20:  can't add bond0.20 to bridge DMZ: Operation not
> supported
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up
> interface bond0.30:  can't add bond0.30 to bridge Devel: Operation not
> supported
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up
> interface bond0.40:  can't add bond0.40 to bridge Lab: Operation not
> supported
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up
> interface bond0.50:  can't add bond0.50 to bridge Workstation: Operation
> not supported
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up
> interface Workstation:  device Workstation already exists; can't create
> bridge with the sa
> Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [FAILED]
> Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: network.service:
> control process exited, code=exited status=1
> Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: Failed to start LSB:
> Bring up/down networking.
> -- Subject: Unit network.service has failed
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit network.service has failed.
>
>
> ......
>
>
> Thanks
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170212/e0adac1c/attachment-0001.html>