[ovirt-users] How to Configure and use OVS in Ovirt 4.1

[Pradeep Antil]

Hello Folks,

I want to use OVS as network switch in oVirt 4.1, While Creating a cluster
i select OVS as switch type and all LAN ports of ovirt hosts or hypervisor
are configured in trunk mode on the network switch.

Logical networks are created and attached to the bond interface(consists of
LAN cards of my hypervisor).


[image: Inline image 1]

In case of legacy network or Linux bridging either we usually assign the IP
address or vlan id to logical network but while using OVS what needs to be
used ..? Do i need to configure any other settings to use OVS.

What i want to achieve with OVS is that i have around 10 VLANs and want to
use these VLANs in different VMs in my oVirt Setup. If i go with Legacy
switch then i have to create 10 different logical networks.



Thanks in adavnce

-- 
Best Regards
Pradeep Kumar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170331/fcb95646/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 84464 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170331/fcb95646/attachment-0001.png>