[ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
Yuval Turgeman
yuvalt at redhat.com
Tue May 9 08:43:19 UTC 2017
Hi, it seems like some stuff was left on /boot from previous attempts,
making the boot setup stage fail, which means that the node is actually
installed on the onn_labvmhostt05/ovirt-node-ng-4.1.1.1-0.20170406.0+1 LV
but the kernel wasn't installed, making it impossible to boot to that LV.
The way I see it, you could try to clean up the
/boot/ovirt-node-ng-4.1.1.1* files and retry everything just like you did
(umount, lvremove, reinstall rpms, etc), but the thing is that in one of
your runs, there's a 'grubby' line that failed and stderr is not shown in
the log. Try to follow the steps above and retry, and if grubby fails
again (you can see it in the last few lines of the imgbased.log), you could
try to manually run that grubby line from the log and send its output and
imgbased.log so we could continue from there.
Thanks,
Yuval.
On Mon, May 8, 2017 at 11:14 PM, Beckman, Daniel <
Daniel.Beckman at ingramcontent.com> wrote:
> Hello,
>
>
>
> I was originally on 4.0.3 (from the ISO). The two 4.1.1 layers were not
> mounted; I went ahead and used lvremove to remove them. I removed all three
> packages, cleared out /etc/yum.repos.d, re-added ovirt-release41 from the
> URL, and then re-installed ovirt-node-ng-image-update, which installed
> ovirt-node-ng-image as a dependency. The install did not report any errors.
> It put the 4.1.1 layers back in. I’ve uploaded the latest
> /tmp/imgbased.log.
>
>
>
> Thanks,
>
> Daniel
>
>
>
> *From: *Yuval Turgeman <yuvalt at redhat.com>
> *Date: *Friday, May 5, 2017 at 12:32 PM
>
> *To: *"Beckman, Daniel" <Daniel.Beckman at ingramcontent.com>
> *Cc: *"sbonazzo at redhat.com" <sbonazzo at redhat.com>, Yedidyah Bar David <
> didi at redhat.com>, "users at ovirt.org" <users at ovirt.org>
> *Subject: *Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update
> oVirt Node (4.x) Hosts?
>
>
>
> Were you on 4.0.3 or 4.0.6 ? Anyway, try to umount and lvremove the two
> 4.1.1 layers, then redo the steps from the last email. If it doesnt work
> please resend /tmp/imgbased.log
>
>
>
> Thanks,
>
> Yuval
>
>
>
> On May 5, 2017 6:17 PM, "Beckman, Daniel" <Daniel.Beckman at ingramcontent.
> com> wrote:
>
> Here is output of ‘lvs –a’:
>
>
>
> LV VG Attr LSize
> Pool Origin Data% Meta% Move Log Cpy%Sync
> Convert
>
> [lvol0_pmspare] onn_labvmhostt05 ewi------- 88.00m
>
>
>
> ovirt-node-ng-4.0.3-0.20160830.0 onn_labvmhostt05 Vwi---tz-k
> 335.92g pool00 root
>
>
> ovirt-node-ng-4.0.3-0.20160830.0+1 onn_labvmhostt05 Vwi-aotz--
> 335.92g pool00 ovirt-node-ng-4.0.3-0.20160830.0 1.26
>
>
> ovirt-node-ng-4.1.1.1-0.20170406.0 onn_labvmhostt05 Vri---tz-k
> 335.92g pool00
>
>
> ovirt-node-ng-4.1.1.1-0.20170406.0+1 onn_labvmhostt05 Vwi---tz--
> 335.92g pool00 ovirt-node-ng-4.1.1.1-0.20170406.0
>
>
> pool00 onn_labvmhostt05 twi-aotz--
> 350.96g 2.53 0.17
>
>
> [pool00_tdata] onn_labvmhostt05 Twi-ao----
> 350.96g
>
>
> [pool00_tmeta] onn_labvmhostt05 ewi-ao---- 1.00g
>
>
>
> root onn_labvmhostt05 Vwi---tz--
> 335.92g pool00
>
>
> swap onn_labvmhostt05 -wi-ao---- 4.00g
>
>
>
> var onn_labvmhostt05 Vwi-aotz-- 15.00g
> pool00 8.47
>
>
>
> Thanks,
>
> Daniel
>
>
>
> *From: *Yuval Turgeman <yuvalt at redhat.com>
> *Date: *Thursday, May 4, 2017 at 4:18 PM
> *To: *"Beckman, Daniel" <Daniel.Beckman at ingramcontent.com>
> *Cc: *"sbonazzo at redhat.com" <sbonazzo at redhat.com>, Yedidyah Bar David <
> didi at redhat.com>, "users at ovirt.org" <users at ovirt.org>
> *Subject: *Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update
> oVirt Node (4.x) Hosts?
>
>
>
> what does `lvs -a` show ?
>
>
>
> On May 4, 2017 21:50, "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com>
> wrote:
>
> Hi Yuval,
>
>
>
> All three of those packages (ovirt-node-ng-image-update,
> ovirt-node-ng-image, ovirt-release41) were already installed. So I ran a
> ‘yum remove’ on all of them, removed everything from /etc/yum.repos.d,
> installed the release RPM, then installed the other two packages. Here’s
> the installation:
>
>
>
> ============================================================
> ============================================================
> ============================================================
> ==================
>
> Package
> Arch Version
> Repository Size
>
> ============================================================
> ============================================================
> ============================================================
> ==================
>
> Installing:
>
> ovirt-node-ng-image-update
> noarch 4.1.1.1-1.el7.centos
> ovirt-4.1 3.8 k
>
> Installing for dependencies:
>
> ovirt-node-ng-image
> noarch 4.1.1.1-1.el7.centos
> ovirt-4.1 526 M
>
>
>
> Transaction Summary
>
> ============================================================
> ============================================================
> ============================================================
> ==================
>
> Install 1 Package (+1 Dependent package)
>
>
>
> Total download size: 526 M
>
> Installed size: 526 M
>
> Is this ok [y/d/N]: y
>
> Downloading packages:
>
> (1/2): ovirt-node-ng-image-update-4.1.1.1-1.el7.centos.noarch.rpm
> |
> 3.8 kB 00:00:00
>
> (2/2): ovirt-node-ng-image-4.1.1.1-1.el7.centos.noarch.rpm
>
> | 526 MB 00:01:55
>
> ------------------------------------------------------------
> ------------------------------------------------------------
> ------------------------------------------------------------
> ------------------
>
> Total
>
> 4.6 MB/s | 526 MB
> 00:01:55
>
> Running transaction check
>
> Running transaction test
>
> Transaction test succeeded
>
> Running transaction
>
> Installing : ovirt-node-ng-image-4.1.1.1-1.
> el7.centos.noarch
>
> 1/2
>
> Installing : ovirt-node-ng-image-update-4.1.1.1-1.el7.centos.noarch
>
> 2/2
>
> mount: special device /dev/onn_labvmhostt05/ovirt-node-ng-4.1.1.1-0.20170406.0+1
> does not exist
>
> rm: cannot remove ‘/tmp/tmp.uEAD6kCtlR/usr/share/imgbased/*image-update*.rpm’:
> No such file or directory
>
> umount: /tmp/tmp.uEAD6kCtlR: not mounted
>
> Verifying : ovirt-node-ng-image-update-4.1.1.1-1.el7.centos.noarch
>
> 1/2
>
> Verifying : ovirt-node-ng-image-4.1.1.1-1.
> el7.centos.noarch
>
> 2/2
>
>
>
> Installed:
>
> ovirt-node-ng-image-update.noarch 0:4.1.1.1-1.el7.centos
>
>
>
>
>
> Dependency Installed:
>
> ovirt-node-ng-image.noarch 0:4.1.1.1-1.el7.centos
>
>
>
>
>
> Complete!
>
>
>
> Also, note output of ‘nodectl check’:
>
> [root at labvmhostt05 yum.repos.d]# nodectl check
>
> Status: FAILED
>
> Bootloader ... FAILED - It looks like there are no valid bootloader
> entries. Please ensure this is fixed before rebooting.
>
> Layer boot entries ... FAILED - No bootloader entries which point to
> imgbased layers
>
> Valid boot entries ... FAILED - No valid boot entries for imgbased
> layers or non-imgbased layers
>
> Mount points ... OK
>
> Separate /var ... OK
>
> Discard is used ... OK
>
> Basic storage ... OK
>
> Initialized VG ... OK
>
> Initialized Thin Pool ... OK
>
> Initialized LVs ... OK
>
> Thin storage ... OK
>
> Checking available space in thinpool ... OK
>
> Checking thinpool auto-extend ... OK
>
> vdsmd ... OK
>
>
>
> I’ll attach the /tmp/imgbased.log file.
>
>
>
> Thanks,
>
> Daniel
>
>
>
> *From: *Yuval Turgeman <yuvalt at redhat.com>
> *Date: *Wednesday, May 3, 2017 at 1:23 PM
> *To: *"Beckman, Daniel" <Daniel.Beckman at ingramcontent.com>
> *Cc: *"users at ovirt.org" <users at ovirt.org>, Yedidyah Bar David <
> didi at redhat.com>, "sbonazzo at redhat.com" <sbonazzo at redhat.com>
> *Subject: *Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update
> oVirt Node (4.x) Hosts?
>
>
>
> Hi, you can try the following:
>
>
>
> 1. Make sure you have a /etc/iscsi/initiatorname.iscsi file. If you
> don't, create an empty one (to avoid a migration bug)
>
> 2. Install the ovirt-release41 rpm (http://resources.ovirt.org/
> pub/yum-repo/ovirt-release41.rpm)
>
> 3. yum update ovirt-node-ng-image-update
>
> 4. Make sure only 2 rpms are about to be installed
> (ovirt-node-ng-image-update and ovirt-node-ng-image) ~530M
>
>
>
> Save /tmp/imgbased.log in case something fails so we could take a look :)
>
>
>
> Thanks,
>
> Yuval
>
>
>
>
>
>
>
>
>
> On Wed, May 3, 2017 at 6:23 PM, Beckman, Daniel <
> Daniel.Beckman at ingramcontent.com> wrote:
>
> I don’t recall doing anything special with the repositories, apart from
> (recently) adding the oVirt 4.1 repository. These hosts were originally
> deployed by downloading the oVirt Node 4.0.3 ISO image.
>
>
>
> How should the repos be setup? Is there an RPM I can download that will
> install the appropriate repos?
>
>
>
> Thanks,
>
> Daniel
>
>
>
> *From: *Yuval Turgeman <yuvalt at redhat.com>
> *Date: *Tuesday, May 2, 2017 at 2:56 PM
> *To: *"Beckman, Daniel" <Daniel.Beckman at ingramcontent.com>
> *Cc: *"users at ovirt.org" <users at ovirt.org>, Yedidyah Bar David <
> didi at redhat.com>, "sbonazzo at redhat.com" <sbonazzo at redhat.com>
> *Subject: *Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update
> oVirt Node (4.x) Hosts?
>
>
>
> Looks like your repos are not set up correctly. oVirt node is an image
> and the update is a complete image as well, containing a set packages that
> were tested and known to work well together. This means that when you yum
> update your system, a single "ovirt-node-ng-image-update" rpm should be
> installed instead of a list of packages like you mentioned. That's
> probably what messed things up. How did you configure your repos ?
>
>
>
> On May 1, 2017 6:15 PM, "Beckman, Daniel" <Daniel.Beckman at ingramcontent.
> com> wrote:
>
> Hello,
>
> I’ve attached the log file for one of the hosts from
> /var/log/ovirt-engine/host-deploy.
>
> As to the manual update: yes, I ran it after removing the ovirt40 repo and
> adding ovirt41 repo. Here are the packages it updated:
> Updated cockpit-ovirt-dashboard-0.10.6-1.4.2.el7.centos.noarch
> ?
> Update 0.10.7-0.0.16.el7.centos.noarch
> @ovirt-4.1
> Dep-Install collectd-5.7.0-2.el7.x86_64
> @centos-opstools-release
> Dep-Install collectd-disk-5.7.0-2.el7.x86_64
> @centos-opstools-release
> Dep-Install collectd-netlink-5.7.0-2.el7.x86_64
> @centos-opstools-release
> Dep-Install collectd-virt-5.7.0-2.el7.x86_64
> @centos-opstools-release
> Dep-Install collectd-write_http-5.7.0-2.el7.x86_64
> @centos-opstools-release
> Dep-Install fluentd-0.12.26-2.el7.noarch
> @centos-opstools-release
> Dep-Install gdeploy-2.0.1-13.noarch
> @rnachimu-gdeploy
> Updated glusterfs-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-api-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-cli-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-client-xlators-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-fuse-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-geo-replication-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-libs-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-rdma-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated glusterfs-server-3.7.20-1.el7.x86_64
> ?
> Update 3.8.11-1.el7.x86_64
> @ovirt-4.1-centos-gluster38
> Updated imgbased-0.8.11-0.201612061451git1b9e081.el7.centos.noarch
> ?
> Update 0.9.23-1.el7.centos.noarch
> @ovirt-4.1
> Updated ioprocess-0.16.1-1.el7.x86_64
> @?ovirt-centos-ovirt41
> Update 0.17.0-1.201611101241.gitb7e353c.el7.centos.x86_64
> @ovirt-4.1
> Dep-Install libtomcrypt-1.17-23.el7.x86_64
> @ovirt-4.1-epel
> Dep-Install libtommath-0.42.0-4.el7.x86_64
> @ovirt-4.1-epel
> Dep-Install libtool-ltdl-2.4.2-22.el7_3.x86_64
> @updates
> Updated mom-0.5.8-1.el7.centos.noarch
> @?ovirt-4.1
> Update 0.5.9-1.el7.centos.noarch
> @ovirt-4.1
> Dep-Install net-snmp-1:5.7.2-24.el7_3.2.x86_64
> @updates
> Dep-Install net-snmp-agent-libs-1:5.7.2-24.el7_3.2.x86_64
> @updates
> Updated openvswitch-2.5.0-2.el7.x86_64
> ?
> Update 2.7.0-1.el7.centos.x86_64
> @ovirt-4.1
> Updated otopi-1.5.2-1.el7.centos.noarch
> ?
> Update 1.6.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated ovirt-host-deploy-1.5.3-1.el7.centos.noarch
> ?
> Update 1.6.3-1.el7.centos.noarch
> @ovirt-4.1
> Updated ovirt-hosted-engine-ha-2.0.6-1.el7.centos.noarch
> ?
> Update 2.1.0.5-1.el7.centos.noarch
> @ovirt-4.1
> Updated ovirt-hosted-engine-setup-2.0.4.1-1.el7.centos.noarch
> ?
> Update 2.1.0.5-1.el7.centos.noarch
> @ovirt-4.1
> Updated ovirt-imageio-common-0.4.0-1.el7.noarch
> ?
> Update 1.0.0-1.el7.noarch
> @ovirt-centos-ovirt41
> Updated ovirt-imageio-daemon-0.4.0-1.el7.noarch
> ?
> Update 1.0.0-1.el7.noarch
> @ovirt-centos-ovirt41
> Updated ovirt-node-ng-nodectl-4.0.6-0.20170111.0.el7.noarch
> ?
> Update 4.1.0-0.20170406.0.el7.noarch
> @ovirt-4.1
> Updated ovirt-release-host-node-4.0.6.1-1.el7.noarch
> ?
> Update 4.1.1.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated ovirt-release41-4.1.1-1.el7.centos.noarch
> @?ovirt-4.1
> Update 4.1.1.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated ovirt-setup-lib-1.0.2-1.el7.centos.noarch
> ?
> Update 1.1.0-1.el7.centos.noarch
> @ovirt-4.1
> Dep-Install python-babel-0.9.6-8.el7.noarch
> @base
> Dep-Install python-dateutil-1.5-7.el7.noarch
> @base
> Dep-Install python-httplib2-0.9.1-2.el7.noarch
> @ovirt-centos-ovirt41
> Updated python-ioprocess-0.16.1-1.el7.noarch
> @?ovirt-centos-ovirt41
> Update 0.17.0-1.201611101242.gitb7e353c.el7.centos.noarch
> @ovirt-4.1
> Dep-Install python-jinja2-2.7.2-2.el7.noarch
> @base
> Dep-Install python-keyczar-0.71c-2.el7.noarch
> @ovirt-centos-ovirt41
> Dep-Install python-markupsafe-0.11-10.el7.x86_64
> @base
> Dep-Install python-setuptools-0.9.8-4.el7.noarch
> @base
> Dep-Install python2-crypto-2.6.1-13.el7.x86_64
> @ovirt-4.1-epel
> Dep-Install python2-ecdsa-0.13-4.el7.noarch
> @ovirt-4.1-epel
> Dep-Install python2-paramiko-1.16.1-2.el7.noarch
> @ovirt-4.1-epel
> Dep-Install python2-passlib-1.6.5-1.el7.noarch
> @ovirt-centos-ovirt41
> Dep-Install python2-pyasn1-0.1.9-7.el7.noarch
> @base
> Dep-Install rng-tools-5-8.el7.x86_64
> @base
> Dep-Install ruby-2.0.0.648-29.el7.x86_64
> @base
> Dep-Install ruby-irb-2.0.0.648-29.el7.noarch
> @base
> Dep-Install ruby-libs-2.0.0.648-29.el7.x86_64
> @base
> Dep-Install rubygem-bigdecimal-1.2.0-29.el7.x86_64
> @base
> Dep-Install rubygem-cool.io-1.2.4-2.el7.x86_64
> @centos-opstools-release
> Dep-Install rubygem-fluent-plugin-rewrite-tag-filter-1.5.5-5.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-fluent-plugin-secure-forward-0.4.3-1.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-http_parser.rb-0.6.0-1.el7.x86_64
> @centos-opstools-release
> Dep-Install rubygem-io-console-0.4.2-29.el7.x86_64
> @base
> Dep-Install rubygem-json-1.7.7-29.el7.x86_64
> @base
> Dep-Install rubygem-msgpack-0.5.11-1.el7.x86_64
> @centos-opstools-release
> Dep-Install rubygem-proxifier-1.0.3-1.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-psych-2.0.0-29.el7.x86_64
> @base
> Dep-Install rubygem-rdoc-4.0.0-29.el7.noarch
> @base
> Dep-Install rubygem-resolve-hostname-0.0.4-1.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-sigdump-0.2.2-1.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-string-scrub-0.0.5-1.el7.x86_64
> @centos-opstools-release
> Dep-Install rubygem-thread_safe-0.3.4-1.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-tzinfo-1.2.2-2.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-tzinfo-data-1.2014.10-2.el7.noarch
> @centos-opstools-release
> Dep-Install rubygem-yajl-ruby-1.2.1-1.el7.x86_64
> @centos-opstools-release
> Dep-Install rubygems-2.0.14.1-29.el7.noarch
> @base
> Dep-Install screen-4.1.0-0.23.20120314git3c2946.el7_2.x86_64
> @base
> Dep-Install sshpass-1.05-5.el7.x86_64
> @ovirt-centos-ovirt41
> Dep-Install tcpdump-14:4.5.1-3.el7.x86_64
> @base
> Updated vdsm-4.18.21-1.el7.centos.x86_64
> ?
> Update 4.19.10.1-1.el7.centos.x86_64
> @ovirt-4.1
> Updated vdsm-api-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-cli-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Dep-Install vdsm-client-4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-gluster-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-hook-ethtool-options-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-hook-fcoe-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-hook-macspoof-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-hook-nestedvt-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-hook-openstacknet-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Dep-Install vdsm-hook-vhostmd-4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-hook-vmfex-dev-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-jsonrpc-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-python-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-xmlrpc-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Updated vdsm-yajsonrpc-4.18.21-1.el7.centos.noarch
> ?
> Update 4.19.10.1-1.el7.centos.noarch
> @ovirt-4.1
> Dep-Install vhostmd-0.5-11.el7.x86_64
> @ovirt-centos-ovirt41
>
> Thanks,
> Daniel
>
> On 4/30/17, 12:44 AM, "Yedidyah Bar David" <didi at redhat.com> wrote:
>
> On Thu, Apr 27, 2017 at 6:48 PM, Beckman, Daniel
> <Daniel.Beckman at ingramcontent.com> wrote:
> > Didi,
> >
> > Thanks for the tip on the utilities – I’ll add that for future
> upgrades. Since you pointed that out, I’m reminded that in a previous
> upgrade (following one of the developer’s suggestions) I had added this:
> > /etc/ovirt-engine/engine.conf.d/99-custom-truststore.conf
> > So I guess that’s why my https certificate was preserved.
>
> Good.
>
> >
> > As to the documentation, I did submit a pull request (#923) and
> ‘JohnMarksRH’ added that along with some additional edits. I’ll move any
> continuing discussion on that to another thread. And yes, the RHV
> documentation is excellent and I’ve often turned to it. It’s too bad some
> of the effort ends up being duplicated. Anyway….
> >
> > Here’s what I did with one of the oVirt nodes:
> > yum -y remove ovirt-release40
> > yum -y install http://resources.ovirt.org/
> pub/yum-repo/ovirt-release41.rpm
> > cd /etc/yum.repos.d
> > # ls
> > CentOS-Base.repo CentOS-fasttrack.repo
> CentOS-Sources.repo cockpit-preview-epel-7.repo
> �� > CentOS-CR.repo CentOS-fasttrack.repo.rpmnew
> CentOS-Vault.repo ovirt-4.0-dependencies.repo
> > CentOS-Debuginfo.repo CentOS-Media.repo
> CentOS-Vault.repo.rpmnew ovirt-4.0.repo
> > rm -f ovirt-4.0*
> >
> > After doing that, when I check again in the admin GUI for an
> upgrade, it shows one available (4.1.1.1). From the GUI I tell it to
> upgrade, and it runs along with no errors, seems to finish, and then
> reboots the host.
> >
> > When the host comes back up, it’s still running 4.0.6. When I check
> again for an available upgrade, it doesn’t see it available. I’m attaching
> the installation log that is referenced in Events in the GUI.
> >
> > If I go straight into the node and run ‘yum update’ and reboot, then
> it gets the latest 4.1.x image and the engine detects it as such.
>
> You mean you do that after the above (removing 4.0 repos, adding 4.1)?
>
> What packages did it update?
>
> Please check also time-wise nearby log files for this host in
> /var/log/ovirt-engine/host-deploy and share them.
> 'ovirt-host-mgmt*' is the result of checking for updates from the
> admin web ui.
>
> > But of course that’s not the ideal method. I used the manual method
> for the remaining hosts.
> >
> > I don’t know if this is related, but since the upgrade I’ve also
> noticed an unfamiliar error when I log in directly to the engine host.
> (It’s a standalone Centos7 VM running on a separate KVM host.) Here is is:
> >
> > nodectl must be run as root!
> > nodectl must be run as root!
> > This comes up when *any* user logs into the box. When I switch to
> root I get this:
> > /bin/python3: Error while finding spec for 'nodectl.__main__'
> (<class 'ImportError'>: No module named 'nodectl')
> > /bin/python3: Error while finding spec for 'nodectl.__main__'
> (<class 'ImportError'>: No module named 'nodectl')
> > So it looks like it’s been invoked from here:
> > ls -llh /etc/profile.d/nodectl*
> > -rwxr-xr-x. 1 root root 13 Apr 6 06:46
> /etc/profile.d/nodectl-motd.sh
> > -rwxr-xr-x. 1 root root 24 Apr 6 06:46 /etc/profile.d/nodectl-run-
> banner.sh
> > According to ‘yum whatprovides’ this appears to have been installed
> by package “ovirt-node-ng-nodectl-4.1.0-0.20170406.0.el7.noarch”.
> >
> > Anyone else getting this? I can try fixing the python error by
> adding the module, but I thought I’d report this first. Any suggestions as
> to next steps?
>
> Adding Yuval for the node-specific issues.
>
> Best,
>
> >
> > Thanks
> > Daniel
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On 4/25/17, 2:01 AM, "Yedidyah Bar David" <didi at redhat.com> wrote:
> >
> > On Tue, Apr 25, 2017 at 1:19 AM, Beckman, Daniel
> > <Daniel.Beckman at ingramcontent.com> wrote:
> > > So I successfully upgraded my engine from 4.06 to 4.1.1 with
> no major
> > > issues.
> > >
> > >
> > >
> > > A nice thing I noticed was that my custom CA certificate for
> https on the
> > > admin and user portals wasn’t clobbered by setup.
> > >
> > >
> > >
> > > I did have to restore my custom settings for ISO uploader, log
> collector,
> > > and websocket proxy:
> > >
> > > cp
> > > /etc/ovirt-engine/isouploader.conf.d/10-engine-setup.conf.<
> latest_timestamp>
> > > /etc/ovirt-engine/isouploader.conf.d/10-engine-setup.conf
> > >
> > > cp
> > > /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-
> setup.conf.<latest_timestamp>
> > > /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf
> > >
> > > cp
> > > /etc/ovirt-engine/logcollector.conf.d/10-engine-
> setup.conf.<latest_timestamp>
> > > /etc/ovirt-engine/logcollector.conf.d/10-engine-setup.conf
> >
> > The utilities read these files sorted by name, last wins. So you
> > can add '99-my.conf' to each and have it override whatever
> engine-setup does.
> >
> > >
> > >
> > >
> > > Now I’m moving on to updating the oVirt node hosts, which are
> currently at
> > > oVirt Node 4.0.6.1. (I’m assuming I should do that before
> attempting to
> > > upgrade the cluster and data center compatibility level to
> 4.1.)
> > >
> > >
> > >
> > > When I right-click on a host and go to Installation / Check
> for Upgrade, the
> > > results are ‘no updates found.’ When I log into that host
> directly, I notice
> > > it’s still got the oVirt 4.0 repo, not 4.1. Is there an extra
> step I’m
> > > missing? The documentation I’ve found
> > > (http://www.ovirt.org/documentation/upgrade-guide/
> chap-Updates_between_Minor_Releases/)
> > > doesn’t mention this.
> >
> > You are right. It's mentioned for the engine in the release
> notes [1]
> > but not for the hosts. Please file a github issue or send a pull
> request :-)
> >
> > [1] https://www.ovirt.org/release/4.1.0/
> >
> > >
> > >
> > >
> > >
> > >
> > > **
> > >
> > > If I can offer some unsolicited feedback: I feel like this
> list is populated
> > > with a lot of questions that could be averted with a little
> care and feeding
> > > of the documentation. It’s unfortunate because that makes for
> a rocky
> > > introduction to oVirt, and it makes it look like a neglected
> project, which
> > > I know is not the case.
> >
> > Patches are welcome :-)
> >
> > >
> > >
> > >
> > > On a related note, I know this has been discussed before but…
> > >
> > > The centralized control in Github for the documentation does
> not really
> > > encourage user contributions. What’s wrong with a wiki? If
> we’re really
> > > concerned about bad or malicious edits being posted, keep the
> official in
> > > git and add a separate wiki that is clearly marked as
> user-contributed.
> >
> > That was indeed discussed in the past, I am not aware of any
> conclusions.
> > Perhaps start a separate thread about this? Adding Duck.
> >
> > Please also note that you can have a look at RHV documentation
> [2].
> > Almost all of it applies to oVirt as well (and oVirt's to RHV).
> >
> > [2] https://access.redhat.com/documentation/en/red-hat-
> virtualization/
> >
> > Best,
> >
> > >
> > > **
> > >
> > >
> > >
> > >
> > >
> > > Thanks,
> > >
> > > Daniel
> > >
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
> >
> >
> > --
> > Didi
> >
> >
> >
> >
> >
> >
>
>
>
> --
> Didi
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170509/83a3f2e8/attachment-0001.html>
More information about the Users
mailing list