[ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
Beckman, Daniel
Daniel.Beckman at ingramcontent.com
Tue May 9 14:49:24 UTC 2017
Hi Yuval,
Thanks for your patience. ☺
I tried that – completely removing /boot/ovirt-node-ng-4.1.1.1* and performing the same previous steps. Before doing this I cleared out the imgbased.log file so it has only the latest entries.
I’m assuming this is the command you referenced:
[DEBUG] Calling binary: (['grubby', '--copy-default', '--add-kernel', '/boot/ovirt-node-ng-4.1.1.1-0.20170406.0+1/vmlinuz-3.10.0-514.10.2.el7.x86_64', '--initrd', '/boot/ovirt-node-ng-4.1.1.1-0.20170406.0+1/initramfs-3.10.0-514.10.2.el7.x86_64.img', '--args', 'rhgb crashkernel=auto root=/dev/onn_labvmhostt05/ovirt-node-ng-4.1.1.1-0.20170406.0+1 rd.lvm.lv=onn_labvmhostt05/ovirt-node-ng-4.1.1.1-0.20170406.0+1 rd.lvm.lv=onn_labvmhostt05/swap quiet img.bootid=ovirt-node-ng-4.1.1.1-0.20170406.0+1', '--title', 'ovirt-node-ng-4.1.1.1-0.20170406.0', '--bad-image-okay'],) {}
I could use some help in getting the correct syntax. I’ve attached the latest imgbased.log file.
Thanks,
Daniel
From: Yuval Turgeman <yuvalt at redhat.com>
Date: Tuesday, May 9, 2017 at 3:43 AM
To: "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com>
Cc: "sbonazzo at redhat.com" <sbonazzo at redhat.com>, Yedidyah Bar David <didi at redhat.com>, "users at ovirt.org" <users at ovirt.org>
Subject: Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
Hi, it seems like some stuff was left on /boot from previous attempts, making the boot setup stage fail, which means that the node is actually installed on the onn_labvmhostt05/ovirt-node-ng-4.1.1.1-0.20170406.0+1 LV but the kernel wasn't installed, making it impossible to boot to that LV.
The way I see it, you could try to clean up the /boot/ovirt-node-ng-4.1.1.1* files and retry everything just like you did (umount, lvremove, reinstall rpms, etc), but the thing is that in one of your runs, there's a 'grubby' line that failed and stderr is not shown in the log. Try to follow the steps above and retry, and if grubby fails again (you can see it in the last few lines of the imgbased.log), you could try to manually run that grubby line from the log and send its output and imgbased.log so we could continue from there.
Thanks,
Yuval.
On Mon, May 8, 2017 at 11:14 PM, Beckman, Daniel <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
Hello,
I was originally on 4.0.3 (from the ISO). The two 4.1.1 layers were not mounted; I went ahead and used lvremove to remove them. I removed all three packages, cleared out /etc/yum.repos.d, re-added ovirt-release41 from the URL, and then re-installed ovirt-node-ng-image-update, which installed ovirt-node-ng-image as a dependency. The install did not report any errors. It put the 4.1.1 layers back in. I’ve uploaded the latest /tmp/imgbased.log.
Thanks,
Daniel
From: Yuval Turgeman <yuvalt at redhat.com<mailto:yuvalt at redhat.com>>
Date: Friday, May 5, 2017 at 12:32 PM
To: "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>>
Cc: "sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>" <sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>>, Yedidyah Bar David <didi at redhat.com<mailto:didi at redhat.com>>, "users at ovirt.org<mailto:users at ovirt.org>" <users at ovirt.org<mailto:users at ovirt.org>>
Subject: Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
Were you on 4.0.3 or 4.0.6 ? Anyway, try to umount and lvremove the two 4.1.1 layers, then redo the steps from the last email. If it doesnt work please resend /tmp/imgbased.log
Thanks,
Yuval
On May 5, 2017 6:17 PM, "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
Here is output of ‘lvs –a’:
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
[lvol0_pmspare] onn_labvmhostt05 ewi------- 88.00m
ovirt-node-ng-4.0.3-0.20160830.0 onn_labvmhostt05 Vwi---tz-k 335.92g pool00 root
ovirt-node-ng-4.0.3-0.20160830.0+1 onn_labvmhostt05 Vwi-aotz-- 335.92g pool00 ovirt-node-ng-4.0.3-0.20160830.0 1.26
ovirt-node-ng-4.1.1.1-0.20170406.0 onn_labvmhostt05 Vri---tz-k 335.92g pool00
ovirt-node-ng-4.1.1.1-0.20170406.0+1 onn_labvmhostt05 Vwi---tz-- 335.92g pool00 ovirt-node-ng-4.1.1.1-0.20170406.0
pool00 onn_labvmhostt05 twi-aotz-- 350.96g 2.53 0.17
[pool00_tdata] onn_labvmhostt05 Twi-ao---- 350.96g
[pool00_tmeta] onn_labvmhostt05 ewi-ao---- 1.00g
root onn_labvmhostt05 Vwi---tz-- 335.92g pool00
swap onn_labvmhostt05 -wi-ao---- 4.00g
var onn_labvmhostt05 Vwi-aotz-- 15.00g pool00 8.47
Thanks,
Daniel
From: Yuval Turgeman <yuvalt at redhat.com<mailto:yuvalt at redhat.com>>
Date: Thursday, May 4, 2017 at 4:18 PM
To: "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>>
Cc: "sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>" <sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>>, Yedidyah Bar David <didi at redhat.com<mailto:didi at redhat.com>>, "users at ovirt.org<mailto:users at ovirt.org>" <users at ovirt.org<mailto:users at ovirt.org>>
Subject: Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
what does `lvs -a` show ?
On May 4, 2017 21:50, "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
Hi Yuval,
All three of those packages (ovirt-node-ng-image-update, ovirt-node-ng-image, ovirt-release41) were already installed. So I ran a ‘yum remove’ on all of them, removed everything from /etc/yum.repos.d, installed the release RPM, then installed the other two packages. Here’s the installation:
======================================================================================================================================================================================================
Package Arch Version Repository Size
======================================================================================================================================================================================================
Installing:
ovirt-node-ng-image-update noarch 4.1.1.1-1.el7.centos ovirt-4.1 3.8 k
Installing for dependencies:
ovirt-node-ng-image noarch 4.1.1.1-1.el7.centos ovirt-4.1 526 M
Transaction Summary
======================================================================================================================================================================================================
Install 1 Package (+1 Dependent package)
Total download size: 526 M
Installed size: 526 M
Is this ok [y/d/N]: y
Downloading packages:
(1/2): ovirt-node-ng-image-update-4.1.1.1-1.el7.centos.noarch.rpm | 3.8 kB 00:00:00
(2/2): ovirt-node-ng-image-4.1.1.1-1.el7.centos.noarch.rpm | 526 MB 00:01:55
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 4.6 MB/s | 526 MB 00:01:55
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : ovirt-node-ng-image-4.1.1.1-1.el7.centos.noarch 1/2
Installing : ovirt-node-ng-image-update-4.1.1.1-1.el7.centos.noarch 2/2
mount: special device /dev/onn_labvmhostt05/ovirt-node-ng-4.1.1.1-0.20170406.0+1 does not exist
rm: cannot remove ‘/tmp/tmp.uEAD6kCtlR/usr/share/imgbased/*image-update*.rpm’: No such file or directory
umount: /tmp/tmp.uEAD6kCtlR: not mounted
Verifying : ovirt-node-ng-image-update-4.1.1.1-1.el7.centos.noarch 1/2
Verifying : ovirt-node-ng-image-4.1.1.1-1.el7.centos.noarch 2/2
Installed:
ovirt-node-ng-image-update.noarch 0:4.1.1.1-1.el7.centos
Dependency Installed:
ovirt-node-ng-image.noarch 0:4.1.1.1-1.el7.centos
Complete!
Also, note output of ‘nodectl check’:
[root at labvmhostt05 yum.repos.d]# nodectl check
Status: FAILED
Bootloader ... FAILED - It looks like there are no valid bootloader entries. Please ensure this is fixed before rebooting.
Layer boot entries ... FAILED - No bootloader entries which point to imgbased layers
Valid boot entries ... FAILED - No valid boot entries for imgbased layers or non-imgbased layers
Mount points ... OK
Separate /var ... OK
Discard is used ... OK
Basic storage ... OK
Initialized VG ... OK
Initialized Thin Pool ... OK
Initialized LVs ... OK
Thin storage ... OK
Checking available space in thinpool ... OK
Checking thinpool auto-extend ... OK
vdsmd ... OK
I’ll attach the /tmp/imgbased.log file.
Thanks,
Daniel
From: Yuval Turgeman <yuvalt at redhat.com<mailto:yuvalt at redhat.com>>
Date: Wednesday, May 3, 2017 at 1:23 PM
To: "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>>
Cc: "users at ovirt.org<mailto:users at ovirt.org>" <users at ovirt.org<mailto:users at ovirt.org>>, Yedidyah Bar David <didi at redhat.com<mailto:didi at redhat.com>>, "sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>" <sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>>
Subject: Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
Hi, you can try the following:
1. Make sure you have a /etc/iscsi/initiatorname.iscsi file. If you don't, create an empty one (to avoid a migration bug)
2. Install the ovirt-release41 rpm (http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm)
3. yum update ovirt-node-ng-image-update
4. Make sure only 2 rpms are about to be installed (ovirt-node-ng-image-update and ovirt-node-ng-image) ~530M
Save /tmp/imgbased.log in case something fails so we could take a look :)
Thanks,
Yuval
On Wed, May 3, 2017 at 6:23 PM, Beckman, Daniel <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
I don’t recall doing anything special with the repositories, apart from (recently) adding the oVirt 4.1 repository. These hosts were originally deployed by downloading the oVirt Node 4.0.3 ISO image.
How should the repos be setup? Is there an RPM I can download that will install the appropriate repos?
Thanks,
Daniel
From: Yuval Turgeman <yuvalt at redhat.com<mailto:yuvalt at redhat.com>>
Date: Tuesday, May 2, 2017 at 2:56 PM
To: "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>>
Cc: "users at ovirt.org<mailto:users at ovirt.org>" <users at ovirt.org<mailto:users at ovirt.org>>, Yedidyah Bar David <didi at redhat.com<mailto:didi at redhat.com>>, "sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>" <sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>>
Subject: Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
Looks like your repos are not set up correctly. oVirt node is an image and the update is a complete image as well, containing a set packages that were tested and known to work well together. This means that when you yum update your system, a single "ovirt-node-ng-image-update" rpm should be installed instead of a list of packages like you mentioned. That's probably what messed things up. How did you configure your repos ?
On May 1, 2017 6:15 PM, "Beckman, Daniel" <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
Hello,
I’ve attached the log file for one of the hosts from /var/log/ovirt-engine/host-deploy.
As to the manual update: yes, I ran it after removing the ovirt40 repo and adding ovirt41 repo. Here are the packages it updated:
Updated cockpit-ovirt-dashboard-0.10.6-1.4.2.el7.centos.noarch ?
Update 0.10.7-0.0.16.el7.centos.noarch @ovirt-4.1
Dep-Install collectd-5.7.0-2.el7.x86_64 @centos-opstools-release
Dep-Install collectd-disk-5.7.0-2.el7.x86_64 @centos-opstools-release
Dep-Install collectd-netlink-5.7.0-2.el7.x86_64 @centos-opstools-release
Dep-Install collectd-virt-5.7.0-2.el7.x86_64 @centos-opstools-release
Dep-Install collectd-write_http-5.7.0-2.el7.x86_64 @centos-opstools-release
Dep-Install fluentd-0.12.26-2.el7.noarch @centos-opstools-release
Dep-Install gdeploy-2.0.1-13.noarch @rnachimu-gdeploy
Updated glusterfs-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-api-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-cli-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-client-xlators-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-fuse-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-geo-replication-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-libs-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-rdma-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated glusterfs-server-3.7.20-1.el7.x86_64 ?
Update 3.8.11-1.el7.x86_64 @ovirt-4.1-centos-gluster38
Updated imgbased-0.8.11-0.201612061451git1b9e081.el7.centos.noarch ?
Update 0.9.23-1.el7.centos.noarch @ovirt-4.1
Updated ioprocess-0.16.1-1.el7.x86_64 @?ovirt-centos-ovirt41
Update 0.17.0-1.201611101241.gitb7e353c.el7.centos.x86_64 @ovirt-4.1
Dep-Install libtomcrypt-1.17-23.el7.x86_64 @ovirt-4.1-epel
Dep-Install libtommath-0.42.0-4.el7.x86_64 @ovirt-4.1-epel
Dep-Install libtool-ltdl-2.4.2-22.el7_3.x86_64 @updates
Updated mom-0.5.8-1.el7.centos.noarch @?ovirt-4.1
Update 0.5.9-1.el7.centos.noarch @ovirt-4.1
Dep-Install net-snmp-1:5.7.2-24.el7_3.2.x86_64 @updates
Dep-Install net-snmp-agent-libs-1:5.7.2-24.el7_3.2.x86_64 @updates
Updated openvswitch-2.5.0-2.el7.x86_64 ?
Update 2.7.0-1.el7.centos.x86_64 @ovirt-4.1
Updated otopi-1.5.2-1.el7.centos.noarch ?
Update 1.6.1-1.el7.centos.noarch @ovirt-4.1
Updated ovirt-host-deploy-1.5.3-1.el7.centos.noarch ?
Update 1.6.3-1.el7.centos.noarch @ovirt-4.1
Updated ovirt-hosted-engine-ha-2.0.6-1.el7.centos.noarch ?
Update 2.1.0.5-1.el7.centos.noarch @ovirt-4.1
Updated ovirt-hosted-engine-setup-2.0.4.1-1.el7.centos.noarch ?
Update 2.1.0.5-1.el7.centos.noarch @ovirt-4.1
Updated ovirt-imageio-common-0.4.0-1.el7.noarch ?
Update 1.0.0-1.el7.noarch @ovirt-centos-ovirt41
Updated ovirt-imageio-daemon-0.4.0-1.el7.noarch ?
Update 1.0.0-1.el7.noarch @ovirt-centos-ovirt41
Updated ovirt-node-ng-nodectl-4.0.6-0.20170111.0.el7.noarch ?
Update 4.1.0-0.20170406.0.el7.noarch @ovirt-4.1
Updated ovirt-release-host-node-4.0.6.1-1.el7.noarch ?
Update 4.1.1.1-1.el7.centos.noarch @ovirt-4.1
Updated ovirt-release41-4.1.1-1.el7.centos.noarch @?ovirt-4.1
Update 4.1.1.1-1.el7.centos.noarch @ovirt-4.1
Updated ovirt-setup-lib-1.0.2-1.el7.centos.noarch ?
Update 1.1.0-1.el7.centos.noarch @ovirt-4.1
Dep-Install python-babel-0.9.6-8.el7.noarch @base
Dep-Install python-dateutil-1.5-7.el7.noarch @base
Dep-Install python-httplib2-0.9.1-2.el7.noarch @ovirt-centos-ovirt41
Updated python-ioprocess-0.16.1-1.el7.noarch @?ovirt-centos-ovirt41
Update 0.17.0-1.201611101242.gitb7e353c.el7.centos.noarch @ovirt-4.1
Dep-Install python-jinja2-2.7.2-2.el7.noarch @base
Dep-Install python-keyczar-0.71c-2.el7.noarch @ovirt-centos-ovirt41
Dep-Install python-markupsafe-0.11-10.el7.x86_64 @base
Dep-Install python-setuptools-0.9.8-4.el7.noarch @base
Dep-Install python2-crypto-2.6.1-13.el7.x86_64 @ovirt-4.1-epel
Dep-Install python2-ecdsa-0.13-4.el7.noarch @ovirt-4.1-epel
Dep-Install python2-paramiko-1.16.1-2.el7.noarch @ovirt-4.1-epel
Dep-Install python2-passlib-1.6.5-1.el7.noarch @ovirt-centos-ovirt41
Dep-Install python2-pyasn1-0.1.9-7.el7.noarch @base
Dep-Install rng-tools-5-8.el7.x86_64 @base
Dep-Install ruby-2.0.0.648-29.el7.x86_64 @base
Dep-Install ruby-irb-2.0.0.648-29.el7.noarch @base
Dep-Install ruby-libs-2.0.0.648-29.el7.x86_64 @base
Dep-Install rubygem-bigdecimal-1.2.0-29.el7.x86_64 @base
Dep-Install rubygem-cool.io-1.2.4-2.el7.x86_64 @centos-opstools-release
Dep-Install rubygem-fluent-plugin-rewrite-tag-filter-1.5.5-5.el7.noarch @centos-opstools-release
Dep-Install rubygem-fluent-plugin-secure-forward-0.4.3-1.el7.noarch @centos-opstools-release
Dep-Install rubygem-http_parser.rb-0.6.0-1.el7.x86_64 @centos-opstools-release
Dep-Install rubygem-io-console-0.4.2-29.el7.x86_64 @base
Dep-Install rubygem-json-1.7.7-29.el7.x86_64 @base
Dep-Install rubygem-msgpack-0.5.11-1.el7.x86_64 @centos-opstools-release
Dep-Install rubygem-proxifier-1.0.3-1.el7.noarch @centos-opstools-release
Dep-Install rubygem-psych-2.0.0-29.el7.x86_64 @base
Dep-Install rubygem-rdoc-4.0.0-29.el7.noarch @base
Dep-Install rubygem-resolve-hostname-0.0.4-1.el7.noarch @centos-opstools-release
Dep-Install rubygem-sigdump-0.2.2-1.el7.noarch @centos-opstools-release
Dep-Install rubygem-string-scrub-0.0.5-1.el7.x86_64 @centos-opstools-release
Dep-Install rubygem-thread_safe-0.3.4-1.el7.noarch @centos-opstools-release
Dep-Install rubygem-tzinfo-1.2.2-2.el7.noarch @centos-opstools-release
Dep-Install rubygem-tzinfo-data-1.2014.10-2.el7.noarch @centos-opstools-release
Dep-Install rubygem-yajl-ruby-1.2.1-1.el7.x86_64 @centos-opstools-release
Dep-Install rubygems-2.0.14.1-29.el7.noarch @base
Dep-Install screen-4.1.0-0.23.20120314git3c2946.el7_2.x86_64 @base
Dep-Install sshpass-1.05-5.el7.x86_64 @ovirt-centos-ovirt41
Dep-Install tcpdump-14:4.5.1-3.el7.x86_64 @base
Updated vdsm-4.18.21-1.el7.centos.x86_64 ?
Update 4.19.10.1-1.el7.centos.x86_64 @ovirt-4.1
Updated vdsm-api-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-cli-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Dep-Install vdsm-client-4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-gluster-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-hook-ethtool-options-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-hook-fcoe-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-hook-macspoof-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-hook-nestedvt-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-hook-openstacknet-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Dep-Install vdsm-hook-vhostmd-4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-hook-vmfex-dev-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-jsonrpc-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-python-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-xmlrpc-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Updated vdsm-yajsonrpc-4.18.21-1.el7.centos.noarch ?
Update 4.19.10.1-1.el7.centos.noarch @ovirt-4.1
Dep-Install vhostmd-0.5-11.el7.x86_64 @ovirt-centos-ovirt41
Thanks,
Daniel
On 4/30/17, 12:44 AM, "Yedidyah Bar David" <didi at redhat.com<mailto:didi at redhat.com>> wrote:
On Thu, Apr 27, 2017 at 6:48 PM, Beckman, Daniel
<Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
> Didi,
>
> Thanks for the tip on the utilities – I’ll add that for future upgrades. Since you pointed that out, I’m reminded that in a previous upgrade (following one of the developer’s suggestions) I had added this:
> /etc/ovirt-engine/engine.conf.d/99-custom-truststore.conf
> So I guess that’s why my https certificate was preserved.
Good.
>
> As to the documentation, I did submit a pull request (#923) and ‘JohnMarksRH’ added that along with some additional edits. I’ll move any continuing discussion on that to another thread. And yes, the RHV documentation is excellent and I’ve often turned to it. It’s too bad some of the effort ends up being duplicated. Anyway….
>
> Here’s what I did with one of the oVirt nodes:
> yum -y remove ovirt-release40
> yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm
> cd /etc/yum.repos.d
> # ls
> CentOS-Base.repo CentOS-fasttrack.repo CentOS-Sources.repo cockpit-preview-epel-7.repo
�� > CentOS-CR.repo CentOS-fasttrack.repo.rpmnew CentOS-Vault.repo ovirt-4.0-dependencies.repo
> CentOS-Debuginfo.repo CentOS-Media.repo CentOS-Vault.repo.rpmnew ovirt-4.0.repo
> rm -f ovirt-4.0*
>
> After doing that, when I check again in the admin GUI for an upgrade, it shows one available (4.1.1.1). From the GUI I tell it to upgrade, and it runs along with no errors, seems to finish, and then reboots the host.
>
> When the host comes back up, it’s still running 4.0.6. When I check again for an available upgrade, it doesn’t see it available. I’m attaching the installation log that is referenced in Events in the GUI.
>
> If I go straight into the node and run ‘yum update’ and reboot, then it gets the latest 4.1.x image and the engine detects it as such.
You mean you do that after the above (removing 4.0 repos, adding 4.1)?
What packages did it update?
Please check also time-wise nearby log files for this host in
/var/log/ovirt-engine/host-deploy and share them.
'ovirt-host-mgmt*' is the result of checking for updates from the admin web ui.
> But of course that’s not the ideal method. I used the manual method for the remaining hosts.
>
> I don’t know if this is related, but since the upgrade I’ve also noticed an unfamiliar error when I log in directly to the engine host. (It’s a standalone Centos7 VM running on a separate KVM host.) Here is is:
>
> nodectl must be run as root!
> nodectl must be run as root!
> This comes up when *any* user logs into the box. When I switch to root I get this:
> /bin/python3: Error while finding spec for 'nodectl.__main__' (<class 'ImportError'>: No module named 'nodectl')
> /bin/python3: Error while finding spec for 'nodectl.__main__' (<class 'ImportError'>: No module named 'nodectl')
> So it looks like it’s been invoked from here:
> ls -llh /etc/profile.d/nodectl*
> -rwxr-xr-x. 1 root root 13 Apr 6 06:46 /etc/profile.d/nodectl-motd.sh
> -rwxr-xr-x. 1 root root 24 Apr 6 06:46 /etc/profile.d/nodectl-run-banner.sh
> According to ‘yum whatprovides’ this appears to have been installed by package “ovirt-node-ng-nodectl-4.1.0-0.20170406.0.el7.noarch”.
>
> Anyone else getting this? I can try fixing the python error by adding the module, but I thought I’d report this first. Any suggestions as to next steps?
Adding Yuval for the node-specific issues.
Best,
>
> Thanks
> Daniel
>
>
>
>
>
>
>
>
>
>
>
> On 4/25/17, 2:01 AM, "Yedidyah Bar David" <didi at redhat.com<mailto:didi at redhat.com>> wrote:
>
> On Tue, Apr 25, 2017 at 1:19 AM, Beckman, Daniel
> <Daniel.Beckman at ingramcontent.com<mailto:Daniel.Beckman at ingramcontent.com>> wrote:
> > So I successfully upgraded my engine from 4.06 to 4.1.1 with no major
> > issues.
> >
> >
> >
> > A nice thing I noticed was that my custom CA certificate for https on the
> > admin and user portals wasn’t clobbered by setup.
> >
> >
> >
> > I did have to restore my custom settings for ISO uploader, log collector,
> > and websocket proxy:
> >
> > cp
> > /etc/ovirt-engine/isouploader.conf.d/10-engine-setup.conf.<latest_timestamp>
> > /etc/ovirt-engine/isouploader.conf.d/10-engine-setup.conf
> >
> > cp
> > /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf.<latest_timestamp>
> > /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf
> >
> > cp
> > /etc/ovirt-engine/logcollector.conf.d/10-engine-setup.conf.<latest_timestamp>
> > /etc/ovirt-engine/logcollector.conf.d/10-engine-setup.conf
>
> The utilities read these files sorted by name, last wins. So you
> can add '99-my.conf' to each and have it override whatever engine-setup does.
>
> >
> >
> >
> > Now I’m moving on to updating the oVirt node hosts, which are currently at
> > oVirt Node 4.0.6.1. (I’m assuming I should do that before attempting to
> > upgrade the cluster and data center compatibility level to 4.1.)
> >
> >
> >
> > When I right-click on a host and go to Installation / Check for Upgrade, the
> > results are ‘no updates found.’ When I log into that host directly, I notice
> > it’s still got the oVirt 4.0 repo, not 4.1. Is there an extra step I’m
> > missing? The documentation I’ve found
> > (http://www.ovirt.org/documentation/upgrade-guide/chap-Updates_between_Minor_Releases/)
> > doesn’t mention this.
>
> You are right. It's mentioned for the engine in the release notes [1]
> but not for the hosts. Please file a github issue or send a pull request :-)
>
> [1] https://www.ovirt.org/release/4.1.0/
>
> >
> >
> >
> >
> >
> > **
> >
> > If I can offer some unsolicited feedback: I feel like this list is populated
> > with a lot of questions that could be averted with a little care and feeding
> > of the documentation. It’s unfortunate because that makes for a rocky
> > introduction to oVirt, and it makes it look like a neglected project, which
> > I know is not the case.
>
> Patches are welcome :-)
>
> >
> >
> >
> > On a related note, I know this has been discussed before but…
> >
> > The centralized control in Github for the documentation does not really
> > encourage user contributions. What’s wrong with a wiki? If we’re really
> > concerned about bad or malicious edits being posted, keep the official in
> > git and add a separate wiki that is clearly marked as user-contributed.
>
> That was indeed discussed in the past, I am not aware of any conclusions.
> Perhaps start a separate thread about this? Adding Duck.
>
> Please also note that you can have a look at RHV documentation [2].
> Almost all of it applies to oVirt as well (and oVirt's to RHV).
>
> [2] https://access.redhat.com/documentation/en/red-hat-virtualization/
>
> Best,
>
> >
> > **
> >
> >
> >
> >
> >
> > Thanks,
> >
> > Daniel
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org<mailto:Users at ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
>
> --
> Didi
>
>
>
>
>
>
--
Didi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170509/f1d51738/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imgbased.log
Type: application/octet-stream
Size: 208280 bytes
Desc: imgbased.log
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170509/f1d51738/attachment-0001.obj>
More information about the Users
mailing list