[ovirt-users] hosted-engine 4.2.1-pre setup on a clean node..
Simone Tiraboschi
stirabos at redhat.com
Thu Feb 15 16:56:23 UTC 2018
On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis <tadavis at lbl.gov> wrote:
> In playing with this, I found that 4.2.1 hosted-engine will not install on
> a node with the ovirtmgmt interface being a vlan.
>
Can you please attach vdsm and host-deploy logs?
> Is this a still supported config? I see that access port, bonded and vlan
> tagged are supported by older versions..
>
Yes, absolutely: if not VLAN doens't work it's definitively an issue.
Adding Ido here.
>
> thomas
>
> On 02/05/2018 08:16 AM, Simone Tiraboschi wrote:
>
>>
>>
>> On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis at lbl.gov <mailto:
>> tadavis at lbl.gov>> wrote:
>>
>> Is this supported?
>>
>> I have a node, that centos 7.4 minimal is installed on, with an
>> interface setup for an IP address.
>>
>> I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run
>> screen, and then do the 'hosted-engine --deploy' command.
>>
>>
>> Fine, nothing else is required.
>>
>>
>> It hangs on:
>>
>> [ INFO ] changed: [localhost]
>> [ INFO ] TASK [Get ovirtmgmt route table id]
>> [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed":
>> true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\
>> //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end":
>> "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02
>> 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "",
>> "stdout_lines": []}
>> [ ERROR ] Failed to execute stage 'Closing up': Failed executing
>> ansible-playbook
>> [ INFO ] Stage: Clean up
>> [ INFO ] Cleaning temporary resources
>> [ INFO ] TASK [Gathering Facts]
>> [ INFO ] ok: [localhost]
>> [ INFO ] TASK [Remove local vm dir]
>> [ INFO ] ok: [localhost]
>> [ INFO ] Generating answer file
>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202
>> 120333.conf'
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Hosted Engine deployment failed: please check the logs for
>> the issue, fix accordingly or re-deploy from scratch.
>> Log file is located at
>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup
>> -20180202115038-r11nh1.log
>>
>> but the VM is up and running, just attached to the 192.168.122.0/24
>> <http://192.168.122.0/24> subnet
>>
>> [root at d8-r13-c2-n1 ~]# ssh root at 192.168.122.37
>> <mailto:root at 192.168.122.37>
>> root at 192.168.122.37 <mailto:root at 192.168.122.37>'s password:
>> Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1
>> [root at ovirt ~]# systemctl status ovirt-engine
>> ● ovirt-engine.service - oVirt Engine
>> Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service;
>> enabled; vendor preset: disabled)
>> Active: active (running) since Fri 2018-02-02 11:54:42 PST;
>> 11min ago
>> Main PID: 24724 (ovirt-engine.py)
>> CGroup: /system.slice/ovirt-engine.service
>> ├─24724 /usr/bin/python
>> /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
>> --redirect-output --systemd=notify start
>> └─24856 ovirt-engine -server -XX:+TieredCompilation
>> -Xms3971M -Xmx3971M -Djava.awt.headless=true
>> -Dsun.rmi.dgc.client.gcInterval=3600000
>> -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
>>
>> Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> systemd[1]: Starting oVirt Engine...
>> Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine:
>> INFO _detectJBossVersion:187 Detecting JBoss version. Running:
>> /usr/lib/jvm/jre/...600000', '-
>> Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine:
>> INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly
>> Full 11.0.0....tderr: '[]'
>> Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> systemd[1]: Started oVirt Engine.
>> Feb 02 11:55:25 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1
>> get_checksum=True follow=False
>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>> Feb 02 11:55:29 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1
>> get_checksum=True follow=False
>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>> Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1
>> get_checksum=True follow=False
>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>> Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>> python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1
>> get_checksum=True follow=False
>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>> Feb 02 11:55:31 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>
>> python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1
>> get_checksum=True follow=False
>> path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
>>
>> The 'ip rule list' never has an ovirtmgmt rule/table in it.. which
>> means the ansible script loops then dies; vdsmd has never configured
>> the network on the node.
>>
>>
>> Right.
>> Can you please attach engine.log and host-deploy from the engine VM?
>>
>>
>> [root at d8-r13-c2-n1 ~]# systemctl status vdsmd -l
>> ● vdsmd.service - Virtual Desktop Server Manager
>> Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
>> vendor preset: enabled)
>> Active: active (running) since Fri 2018-02-02 11:55:11 PST;
>> 14min ago
>> Main PID: 7654 (vdsmd)
>> CGroup: /system.slice/vdsmd.service
>> └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
>>
>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>> Running dummybr
>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>> Running tune_system
>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>> Running test_space
>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>> Running test_lo
>> Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop
>> Server Manager.
>> Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File:
>> /var/run/vdsm/trackedInterfaces/vnet0 already removed
>> Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet,
>> ignoring event
>> '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0'
>> args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering
>> up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1',
>> 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041',
>> 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0',
>> 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0',
>> 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}}
>> Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available.
>> Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM
>> stats will be missing.
>> Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in
>> favor of ping2 and confirmConnectivity
>>
>> Do I need to install a complete ovirt-engine on the node first,
>> bring the node into ovirt, then bring up hosted-engine? I'd like to
>> avoid this and just go straight to hosted-engine setup.
>>
>> thomas
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180215/607f29d1/attachment.html>
More information about the Users
mailing list