[ovirt-users] hosted-engine 4.2.1-pre setup on a clean node..
Simone Tiraboschi
stirabos at redhat.com
Thu Feb 15 16:57:20 UTC 2018
On Thu, Feb 15, 2018 at 5:56 PM, Simone Tiraboschi <stirabos at redhat.com>
wrote:
>
>
> On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis <tadavis at lbl.gov> wrote:
>
>> In playing with this, I found that 4.2.1 hosted-engine will not install
>> on a node with the ovirtmgmt interface being a vlan.
>>
>
> Can you please attach vdsm and host-deploy logs?
>
>
>> Is this a still supported config? I see that access port, bonded and
>> vlan tagged are supported by older versions..
>>
>
> Yes, absolutely: if not VLAN doens't work it's definitively an issue.
> Adding Ido here.
>
Oh, just another thing.
The old flow is still there as a deprecated fallback.
You can force it passing --noansible option.
>
>
>>
>> thomas
>>
>> On 02/05/2018 08:16 AM, Simone Tiraboschi wrote:
>>
>>>
>>>
>>> On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis at lbl.gov <mailto:
>>> tadavis at lbl.gov>> wrote:
>>>
>>> Is this supported?
>>>
>>> I have a node, that centos 7.4 minimal is installed on, with an
>>> interface setup for an IP address.
>>>
>>> I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run
>>> screen, and then do the 'hosted-engine --deploy' command.
>>>
>>>
>>> Fine, nothing else is required.
>>>
>>>
>>> It hangs on:
>>>
>>> [ INFO ] changed: [localhost]
>>> [ INFO ] TASK [Get ovirtmgmt route table id]
>>> [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed":
>>> true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\
>>> //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end":
>>> "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02
>>> 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "",
>>> "stdout_lines": []}
>>> [ ERROR ] Failed to execute stage 'Closing up': Failed executing
>>> ansible-playbook
>>> [ INFO ] Stage: Clean up
>>> [ INFO ] Cleaning temporary resources
>>> [ INFO ] TASK [Gathering Facts]
>>> [ INFO ] ok: [localhost]
>>> [ INFO ] TASK [Remove local vm dir]
>>> [ INFO ] ok: [localhost]
>>> [ INFO ] Generating answer file
>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202
>>> 120333.conf'
>>> [ INFO ] Stage: Pre-termination
>>> [ INFO ] Stage: Termination
>>> [ ERROR ] Hosted Engine deployment failed: please check the logs for
>>> the issue, fix accordingly or re-deploy from scratch.
>>> Log file is located at
>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup
>>> -20180202115038-r11nh1.log
>>>
>>> but the VM is up and running, just attached to the 192.168.122.0/24
>>> <http://192.168.122.0/24> subnet
>>>
>>> [root at d8-r13-c2-n1 ~]# ssh root at 192.168.122.37
>>> <mailto:root at 192.168.122.37>
>>> root at 192.168.122.37 <mailto:root at 192.168.122.37>'s password:
>>> Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1
>>> [root at ovirt ~]# systemctl status ovirt-engine
>>> ● ovirt-engine.service - oVirt Engine
>>> Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service;
>>> enabled; vendor preset: disabled)
>>> Active: active (running) since Fri 2018-02-02 11:54:42 PST;
>>> 11min ago
>>> Main PID: 24724 (ovirt-engine.py)
>>> CGroup: /system.slice/ovirt-engine.service
>>> ├─24724 /usr/bin/python
>>> /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
>>> --redirect-output --systemd=notify start
>>> └─24856 ovirt-engine -server -XX:+TieredCompilation
>>> -Xms3971M -Xmx3971M -Djava.awt.headless=true
>>> -Dsun.rmi.dgc.client.gcInterval=3600000
>>> -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
>>>
>>> Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> systemd[1]: Starting oVirt Engine...
>>> Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine:
>>> INFO _detectJBossVersion:187 Detecting JBoss version. Running:
>>> /usr/lib/jvm/jre/...600000', '-
>>> Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine:
>>> INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly
>>> Full 11.0.0....tderr: '[]'
>>> Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> systemd[1]: Started oVirt Engine.
>>> Feb 02 11:55:25 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1
>>> get_checksum=True follow=False
>>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>>> Feb 02 11:55:29 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1
>>> get_checksum=True follow=False
>>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>>> Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1
>>> get_checksum=True follow=False
>>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>>> Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>> python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1
>>> get_checksum=True follow=False
>>> path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True
>>> Feb 02 11:55:31 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
>>>
>>> python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1
>>> get_checksum=True follow=False
>>> path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
>>>
>>> The 'ip rule list' never has an ovirtmgmt rule/table in it.. which
>>> means the ansible script loops then dies; vdsmd has never configured
>>> the network on the node.
>>>
>>>
>>> Right.
>>> Can you please attach engine.log and host-deploy from the engine VM?
>>>
>>>
>>> [root at d8-r13-c2-n1 ~]# systemctl status vdsmd -l
>>> ● vdsmd.service - Virtual Desktop Server Manager
>>> Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
>>> vendor preset: enabled)
>>> Active: active (running) since Fri 2018-02-02 11:55:11 PST;
>>> 14min ago
>>> Main PID: 7654 (vdsmd)
>>> CGroup: /system.slice/vdsmd.service
>>> └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
>>>
>>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>>> Running dummybr
>>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>>> Running tune_system
>>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>>> Running test_space
>>> Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm:
>>> Running test_lo
>>> Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop
>>> Server Manager.
>>> Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File:
>>> /var/run/vdsm/trackedInterfaces/vnet0 already removed
>>> Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet,
>>> ignoring event
>>> '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0'
>>> args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering
>>> up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1',
>>> 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041',
>>> 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0',
>>> 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0',
>>> 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}}
>>> Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available.
>>> Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM
>>> stats will be missing.
>>> Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in
>>> favor of ping2 and confirmConnectivity
>>>
>>> Do I need to install a complete ovirt-engine on the node first,
>>> bring the node into ovirt, then bring up hosted-engine? I'd like to
>>> avoid this and just go straight to hosted-engine setup.
>>>
>>> thomas
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org <mailto:Users at ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>>
>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180215/5fd4fba2/attachment.html>
More information about the Users
mailing list