[ovirt-users] Fail to add a second network

[carl langlois]

Yes there are on the same subnet.

On Wed, Jan 24, 2018 at 11:58 AM, Petr Horacek <phoracek at redhat.com> wrote:

> Could you hover the Out-Of-Sync icon in Setup Networks dialog and check
> what is causing the issue?
>
> Are both interfaces, you use DHCP on, connected to the same subnet?
>
> 2018-01-24 17:34 GMT+01:00 carl langlois <crl.langlois at gmail.com>:
>
>> Hi Petr,
>>
>> The "VM Network" explain why i do not have the bridge, thanks for the
>> precision.
>> But i still have my problem..but i suspect my problem to be
>> routing/gateway issue.  Should it be using Static address if i already have
>> the other interface use DHCP?
>> I have try using DHCP with the other interface but when i manually bring
>> it up i got difficulty reaching this host..
>>
>> Any hints?
>>
>> Carl
>>
>>
>>
>>
>>
>> On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek <phoracek at redhat.com>
>> wrote:
>>
>>> Hello Carl,
>>>
>>> If you did not mark the network as "VM Network" it will be created
>>> bridgeless.
>>>
>>> Do you think you could share vdsm.log and supervdsm.log from your host,
>>> so I could look into it?
>>>
>>> Thanks,
>>> Petr
>>>
>>> 2018-01-23 18:35 GMT+01:00 carl langlois <crl.langlois at gmail.com>:
>>>
>>>> Hi Kasturi
>>>>
>>>> Thanks for the help. When i am able to add a new network but when i try
>>>> to sync the network it always stay out of sync and if i ssh to that host i
>>>> do not see the bridge but the network card is up and a ip is assign to it.
>>>>
>>>> Thanks
>>>>
>>>> Carl
>>>>
>>>> On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra <knarra at redhat.com>
>>>> wrote:
>>>>
>>>>> Hi Carl,
>>>>>
>>>>>      Below are the steps to configure back end network which is
>>>>> glusternw.
>>>>>
>>>>> 1) create a new network called 'glusternw'
>>>>> 2) Now go to clusters  tab and select Logical networks tab.
>>>>> 3) You should see the newly created network there.
>>>>> 4) select the network and click on 'Manage Networks'
>>>>> 5) In Manage networks window for the newly created network select both
>>>>> 'Migration' & glusternw and click ok.
>>>>> 6) Now go to the hosts tab click on one host and select 'Network
>>>>> Interfaces' tab.
>>>>> 7) select the interface to which you would like to assign the backend
>>>>> network, drag and drop glusternw to that interface and click ok
>>>>> 8) You will see that network is now out of sync.
>>>>> 9) Please click refresh capabilities which will bring the network
>>>>> online.
>>>>>
>>>>> Hope this helps !!
>>>>>
>>>>> Thanks
>>>>> kasturi
>>>>>
>>>>> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois <crl.langlois at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> HI all,
>>>>>>
>>>>>> I am trying to add second network for back-end traffic. My setup is a
>>>>>> 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to
>>>>>> add a second network with the UI and when i try to had a the host interface
>>>>>> to the new network it is always failing and i lost communication with this
>>>>>> host.  I am not sure what are the step to add a second network with already
>>>>>> 3 Host in the cluster.
>>>>>>
>>>>>> My setup us 4.2.
>>>>>>
>>>>>> Any inputs would be appreciated.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180124/b7c38e0e/attachment.html>