[ovirt-users] Fail to add a second network

[Petr Horacek]

Could you please share /var/log/vdsm/vdsm.log and supervdsm.log?

2018-01-24 18:14 GMT+01:00 carl langlois <crl.langlois at gmail.com>:

> Yes there are on the same subnet.
>
> On Wed, Jan 24, 2018 at 11:58 AM, Petr Horacek <phoracek at redhat.com>
> wrote:
>
>> Could you hover the Out-Of-Sync icon in Setup Networks dialog and check
>> what is causing the issue?
>>
>> Are both interfaces, you use DHCP on, connected to the same subnet?
>>
>> 2018-01-24 17:34 GMT+01:00 carl langlois <crl.langlois at gmail.com>:
>>
>>> Hi Petr,
>>>
>>> The "VM Network" explain why i do not have the bridge, thanks for the
>>> precision.
>>> But i still have my problem..but i suspect my problem to be
>>> routing/gateway issue.  Should it be using Static address if i already have
>>> the other interface use DHCP?
>>> I have try using DHCP with the other interface but when i manually bring
>>> it up i got difficulty reaching this host..
>>>
>>> Any hints?
>>>
>>> Carl
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek <phoracek at redhat.com>
>>> wrote:
>>>
>>>> Hello Carl,
>>>>
>>>> If you did not mark the network as "VM Network" it will be created
>>>> bridgeless.
>>>>
>>>> Do you think you could share vdsm.log and supervdsm.log from your host,
>>>> so I could look into it?
>>>>
>>>> Thanks,
>>>> Petr
>>>>
>>>> 2018-01-23 18:35 GMT+01:00 carl langlois <crl.langlois at gmail.com>:
>>>>
>>>>> Hi Kasturi
>>>>>
>>>>> Thanks for the help. When i am able to add a new network but when i
>>>>> try to sync the network it always stay out of sync and if i ssh to that
>>>>> host i do not see the bridge but the network card is up and a ip is assign
>>>>> to it.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Carl
>>>>>
>>>>> On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra <knarra at redhat.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Carl,
>>>>>>
>>>>>>      Below are the steps to configure back end network which is
>>>>>> glusternw.
>>>>>>
>>>>>> 1) create a new network called 'glusternw'
>>>>>> 2) Now go to clusters  tab and select Logical networks tab.
>>>>>> 3) You should see the newly created network there.
>>>>>> 4) select the network and click on 'Manage Networks'
>>>>>> 5) In Manage networks window for the newly created network select
>>>>>> both 'Migration' & glusternw and click ok.
>>>>>> 6) Now go to the hosts tab click on one host and select 'Network
>>>>>> Interfaces' tab.
>>>>>> 7) select the interface to which you would like to assign the backend
>>>>>> network, drag and drop glusternw to that interface and click ok
>>>>>> 8) You will see that network is now out of sync.
>>>>>> 9) Please click refresh capabilities which will bring the network
>>>>>> online.
>>>>>>
>>>>>> Hope this helps !!
>>>>>>
>>>>>> Thanks
>>>>>> kasturi
>>>>>>
>>>>>> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois <
>>>>>> crl.langlois at gmail.com> wrote:
>>>>>>
>>>>>>> HI all,
>>>>>>>
>>>>>>> I am trying to add second network for back-end traffic. My setup is
>>>>>>> a 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to
>>>>>>> add a second network with the UI and when i try to had a the host interface
>>>>>>> to the new network it is always failing and i lost communication with this
>>>>>>> host.  I am not sure what are the step to add a second network with already
>>>>>>> 3 Host in the cluster.
>>>>>>>
>>>>>>> My setup us 4.2.
>>>>>>>
>>>>>>> Any inputs would be appreciated.
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180124/8bfd4656/attachment.html>