[ovirt-users] Change ovirtmgmt ip from dhcp to static in a

[Michael Burman]

Indeed very odd, this shouldn't  behave this way, just tested it my self
and it is working as expected. Unless i miss understood you here, do you
use a different IP address when switching to static or the same IP that you
got from dhcp? if yes, then this is another flow..

Can you please share the vdsm version and vdsm log with us?

Edy, any idea what can cause this?

On Tue, Mar 20, 2018 at 11:10 AM, zois roupas <roupas_zois at hotmail.com>
wrote:

> Hi Michael and thanks a lot for the time
>
>
> Great step by step instructions but something strange is happening while
> trying to change to static ip. I tried to do the change while the host
> was in maintenance mode and in activate mode but again after some minutes
> the system reverts to the ip that dhcp is serving!
>
> What am i missing here? Do you have any ideas?
>
>
> Best Regards
> Zois
> ------------------------------
> *From:* Michael Burman <mburman at redhat.com>
> *Sent:* Tuesday, March 20, 2018 8:46 AM
> *To:* zois roupas
> *Cc:* users at ovirt.org
> *Subject:* Re: [ovirt-users] Change ovirtmgmt ip from dhcp to static in a
>
> Hello Zois,
>
> It pretty easy to do, via the webadmin UI , go to Hosts main tab > Choose
> host > go to 'Network Interfaces' sub tab > Press the 'Setup Host Networks'
> button > press the pencil icon on your management network > and  choose
> Static IP > press OK and OK to approve the operation.
>
> - Note that in some cases, specially if this is a SPM host you will loose
> connectivity to host for few seconds and host may go to non-responsive
> state, on a non-SPM host usually this woks without any specific issues.
>
> - If the spoken host is a SPM host, I recommend to set it first to
> maintenance mode, do the switch and then activate. For non-SPM host this
> will work fine as well when the host is UP.
>
> Cheers)
>
> On Mon, Mar 19, 2018 at 12:15 PM, zois roupas <roupas_zois at hotmail.com>
> wrote:
>
> Hello everyone
>
>
> I've made a rookie mistake by installing ovirt 4.2 in centos 7 with dhcp
> instead of a static ip configuration. Both engine and host are in the same
> machine cause of limited resources and i was so happy that everything
> worked so well that i kept configuring and installing vm's ,adding local
> and nfs storage and setting up the backup!
>
> As you understand i must change the configuration to static ip and i can't
> find any guide describing the correct procedure. Is there an official guide
> to change configuration without causing any trouble?
>
> I've found this thread http://lists.ovirt.org/
> pipermail/users/2014-May/024432.html but this is for a hosted engine and
> doesn't help when both engine and host are in the same machine
>
>
> Thanx in advance
>
> Best Regards
>
> Zois
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
>
> Michael Burman
>
> Senior Quality engineer - rhv network - redhat israel
>
> Red Hat
>
> <https://www.redhat.com>
>
> mburman at redhat.com    M: 0545355725     IM: mburman
> <https://red.ht/sig>
>



-- 

Michael Burman

Senior Quality engineer - rhv network - redhat israel

Red Hat

<https://www.redhat.com>

mburman at redhat.com    M: 0545355725     IM: mburman
<https://red.ht/sig>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180320/5f1a2d15/attachment.html>