[ovirt-users] engine upgrade 4.1.0 => 4.1.1, no more engine console available

Sharon Gratch sgratch at redhat.com
Wed Apr 26 14:15:20 UTC 2017


On Wed, Apr 26, 2017 at 4:39 PM, Gianluca Cecchi <gianluca.cecchi at gmail.com>
wrote:

>
>
> On Wed, Apr 26, 2017 at 3:01 PM, Sharon Gratch <sgratch at redhat.com> wrote:
>
>>
>>
>> On Wed, Apr 26, 2017 at 3:33 PM, Gianluca Cecchi <
>> gianluca.cecchi at gmail.com> wrote:
>>
>>> On Wed, Apr 26, 2017 at 2:20 PM, Sharon Gratch <sgratch at redhat.com>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> The configuration shown at ​2016-07-04 of video set to "cirrus-vga" and
>>>> graphic console set to "spice" is an invalid combination which is not
>>>> supported by oVirt.
>>>>
>>>> I'm not sure how it get there ("vnc" changed to "spice" without
>>>> changing the video device type to "qxl") but it may cause the problem
>>>> afterwards of removing both graphic and video devices ...
>>>>
>>>> Regards,
>>>> Sharon​
>>>>
>>>>
>>> Is there a way I can fix, eventually going and modifying the db?
>>> Thanks,
>>> Gianluca
>>>
>>
>>>> yes, via the UI.
>> 1. Edit the HostedEngive vm and go to console tab
>> 2. Set "Video Type" value to "QXL" and "
>> ​​
>> Graphics protocol" value to "SPICE".
>> 3. restart the HostedEngive vm (It requires a HostedEngive vm restart for
>> the configuration changes to take effect)
>> 4. After the restart, the qxl, spice devices will be created as required.
>>
>> Regards,
>> Sharon​
>>
>>
>>
> The problems is that, from a web gui point of view, the settings in 2. are
> already in place... ;-) but not honored.. is because of this that I asked
> about database manipulation...
> I could instead change the console parameters and set them to cirrus/vnc
> and see if they work after shutdown and restart of engine VM and in a
> second time change again to qxl/spice and see if they are honored then...
>
> What do you think?
>

​You can do that.
But I still think that setting to qxl/spice should work In first round without
setting to cirrus/vnc first, since the "​
​
​
Graphics protocol" is currently set to "None​
​"​

​and not "spice" AFAIR (as displayed in general sub tab).

If it is set to "None", then after the settings in (2) you will be notified
with a pop-up displaying the following:
"Changes that require Virtual Machine restart: graphicsProtocol"

and after a restart both devices should be added.





​
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170426/a2bb32b1/attachment-0001.html>


More information about the Users mailing list