[ovirt-devel] Re: what's up with ansible-runner-service-dev package?

I encounter that problem when I didn't configure my ansible runner as needed Please check that your conf file (/etc/ansible-runner-service/config.yaml) is as follow: --- *version: 1 playbooks_root_dir: '/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' ssh_private_key: '/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' port: 50001 target_user: root*

On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com&gt; wrote: > I just tried installing fedora 30 host with no pre-installed cockpit, > just ovirt-release-master repo. Same as always: > > 2020-03-20 14:01:30,134+01 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID: > VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute > Ansible host-deploy role: Internal server error, please check Ansible > runner error log.. Please check logs for more details: > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log. > > No logs as usual. The error must be on the engine side somewhere... > > ----- Original Message ----- > From: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > To: "Nir Soffer" <nsoffer(a)redhat.com&gt; > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt;, "Dana Elfassy" < > delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; > Sent: Thursday, March 19, 2020 4:20:23 PM > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > Thanks for the response, Nir. > > >You host installed without SSH server enabled? > I've been virtualizing both engine and host vm since I joined the team, > so enabling ssh access is the first thing I do after OS is installed. > > >Not sure why you need cockpit. > >But you need: > >sudo dnf install > >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > I did install ovirt-release-master rpm on the host and somehow managed to > not copy that (facepalm). But believe me it's there. > Regarding cockpit, I was following what's written in > https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts... > > >Why not: > >sudo yum install > >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it > would silently fail when you try installing from the URL :D > > >Did you to add centos 7.7 host? 8.1? > Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host > (that's the lengths I went to get this thing working!). Both fail. > > >Look at the full half of the glass, you have engine. > Nice one. Though I'm afraid that part might be poisoned since host > configuration that worked for me for a year now instantly fails no matter > what OS is used... > > Fedor > > ----- Original Message ----- > From: "Nir Soffer" <nsoffer(a)redhat.com&gt; > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > Cc: "Martin Perina" <mperina(a)redhat.com&gt;, "Liran Rotenberg" < > lrotenbe(a)redhat.com&gt;, "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" < > devel(a)ovirt.org&gt; > Sent: Thursday, March 19, 2020 2:31:39 AM > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com&gt; > wrote: > > > > Wow. I did not expect that, but after clean setup the error is still > there. > > I can't add fedora 30 host to fedora 30 engine. > > > > Here is a full bash history for the host machine since OS was installed: > > > > sudo yum update > > Good > > > sudo systemctl enable sshd > > You host installed without SSH server enabled? > > > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24 > > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 > > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 > > sudo nmcli connection mod ens3 ipv4.method manual > > You can configure the network from the installer, less painful. > > > sudo vi /etc/hosts > > sudo poweroff > > sudo yum install cockpit-ovirt-dashboard > > sudo systemctl enable cockpit.socket --now > > Not sure why you need cockpit. > > But you need: > > sudo dnf install > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > > > > Same for the engine machine (I was installing dependencies separetely > because 1. yum bugs & 2. I was checking if versions are correct one by one): > > > > sudo yum update > > sudo systemctl enable sshd > > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24 > > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 > > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 > > sudo nmcli connection mod ens3 ipv4.method manual > > sudo vi /etc/hosts > > sudo poweroff > > sudo yum install java-11-openjdk-devel > > sudo yum install java-1.8.0-openjdk-headless > > sudo yum install mailcap > > sudo yum install unzip > > sudo yum install openssl > > sudo yum install bind-utils > > sudo yum install postgresql-server > > sudo yum install postgresql > > sudo yum install postgresql-contrib > > sudo yum install python2-dateutil > > sudo yum install python3-dateutil > > sudo yum install python2-m2crypto > > sudo yum install python3-m2crypto > > sudo yum install python2-psycopg2 > > sudo yum install python3-psycopg2 > > sudo yum install python2-jinja2 > > sudo yum install python3-jinja2 > > sudo yum install python2-libxml2 > > sudo yum install python3-libxml2 > > sudo yum install python2-daemon > > sudo yum install python3-daemon > > > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > sudo yum install ./ovirt-release-master.rpm -y > > Why not: > > sudo yum install > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > Also, you want to instal this first - before you install other > packages, so you get packages > from ovirt dependencies. > > > sudo yum install otopi > > sudo yum install python3-ovirt-setup-lib > > sudo yum install maven > > sudo yum install ansible > > sudo yum install ansible-runner-service-dev > > sudo yum install ovirt-ansible-roles > > sudo yum install ovirt-engine-metrics > > sudo yum install python3-ovirt-engine-sdk4 > > sudo yum install pyflakes > > sudo yum install python-pep8 > > sudo yum install python3-docker > > sudo yum install python3-isort > > sudo yum install gcc > > sudo yum install python2-devel > > sudo yum install systemd-python > > sudo yum install python-webob > > sudo yum install redhat-rpm-config > > sudo yum install scl-utils > > sudo yum install ovirt-imageio-common > > Not needed, the ovirt-imageio-proxy will bring it. > > > sudo yum install make > > sudo yum install python-requests > > sudo yum install python-subprocess32 > > sudo alternatives --config java > > sudo yum install ovirt-engine-wildfly > > sudo yum install ovirt-engine-wildfly-overlay > > sudo vi /etc/security/limits.d/10-nofile.conf > > sudo firewall-cmd --add-port=8080/tcp --permanent > > sudo firewall-cmd --add-port=8443/tcp --permanent > > sudo firewall-cmd --add-port=8787/tcp --permanent > > sudo firewall-cmd --add-port=5432/tcp --permanent > > sudo firewall-cmd --add-port=54323/tcp --permanent > > sudo firewall-cmd --reload > > sudo postgresql-setup --initdb --unit postgresql > > sudo vi /var/lib/pgsql/data/pg_hba.conf > > sudo vi /var/lib/pgsql/data/postgresql.conf > > sudo systemctl enable postgresql --now > > sudo systemctl status postgresql > > sudo su - postgres -c "psql -d template1" > > sudo su - postgres -c "psql -d engine" > > sudo -u postgres -i ? > > > sudo vi /etc/ansible-runner-service/config.yaml > > sudo systemctl enable ansible-runner-service --now > > sudo systemctl status ansible-runner-service > > sudo yum install git > > mkdir ~/git && cd ~/git > > git clone git://gerrit.ovirt.org/ovirt-imageio > > git clone git://gerrit.ovirt.org/ovirt-engine > > vi ~/.bashrc > > sudo reboot > > cd ovirt-engine/ > > make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1 > > cd ~/git/ovirt-imageio/ > > make > > cd proxy/ > > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine > > ~/ovirt-engine/bin/engine-setup > > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323 > > vi ~/.bashrc > > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf > > sudo poweroff > > > > I don't know what's wrong. It does not work. > > Look at the full half of the glass, you have engine. > > Did you to add centos 7.7 host? 8.1? > > > ----- Original Message ----- > > From: "Martin Perina" <mperina(a)redhat.com&gt; > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt;, "Dana Elfassy" < > delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; > > Sent: Wednesday, March 18, 2020 3:15:15 PM > > Subject: Re: [ovirt-devel] Re: what's up with > ansible-runner-service-dev package? > > > > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com&gt; > wrote: > > > > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder > why I > > > haven't got this error sooner. > > > Also, given the workaround, does that mean that ansible-lint is > optional? > > > > > > > Yes, same as pep8, pyflake and other build check tools > > > > > > > > ----- Original Message ----- > > > From: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt; > > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > > > Cc: "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; > > > Sent: Wednesday, March 18, 2020 2:21:14 PM > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > > > package? > > > > > > > > > > > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com > > > > > wrote: > > > > > > > > > Ok, thanks for the reaction :) > > > > > > Getting back to the main topic, can anyone (please) try to compile the > > > engine master now? > > > That's what I get when I try to: > > > > > > [602] Don't compare to empty string > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61 > > > > > > when: hosted_engine_vm_cluster_name_result.stdout | trim != "" > > > > > > [602] Don't compare to empty string > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67 > > > > > > when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or > > > hosted_engine_vm_cluster_name_result.stdout is undefined > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2 > > > > > > Task/Handler: Install collectd package > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9 > > > > > > Task/Handler: Install collectd plugins on engine > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19 > > > > > > Task/Handler: Install collectd plugins on hosts > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28 > > > > > > Task/Handler: Install collectd write_syslog plugin > > > > > > [303] systemctl used in place of systemd module > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14 > > > > > > Task/Handler: Check if fluentd is running > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34 > > > > > > - fluentd_is_running|default(false)|bool == true > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35 > > > > > > changed_when: fluentd_is_running|default(false)|bool == true > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45 > > > > > > - fluentd_is_running|default(false)|bool == true > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51 > > > > > > when: fluentd_is_running|default(false)|bool == false > > > > > > [303] systemctl used in place of systemd module > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60 > > > > > > Task/Handler: Check if rsyslog is running > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80 > > > > > > - rsyslog_is_running|default(false)|bool == true > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81 > > > > > > changed_when: rsyslog_is_running|default(false)|bool == true > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91 > > > > > > - rsyslog_is_running|default(false)|bool == true > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97 > > > > > > when: rsyslog_is_running|default(false)|bool == false > > > > > > [303] systemctl used in place of systemd module > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100 > > > > > > Task/Handler: Check if collectd is running > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2 > > > > > > Task/Handler: Install fluentd package > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9 > > > > > > Task/Handler: Install fluentd engine plugins > > > > > > [403] Package installs should not use latest > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19 > > > > > > Task/Handler: Install fluentd host plugins > > > > > > [601] Don't compare to literal True/False > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12 > > > > > > when: stat_result.stat.exists == True > > > > > > [301] Commands should not change things if nothing needs doing > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2 > > > > > > Task/Handler: Get ovirt_engine_fqdn > > > > > > [301] Commands should not change things if nothing needs doing > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13 > > > > > > Task/Handler: Get ovirt_engine_db_name > > > > > > [301] Commands should not change things if nothing needs doing > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22 > > > > > > Task/Handler: Get ovirt_engine_db_user > > > > > > [301] Commands should not change things if nothing needs doing > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31 > > > > > > Task/Handler: Get ovirt_engine_history_db_name > > > > > > [301] Commands should not change things if nothing needs doing > > > > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40 > > > > > > Task/Handler: Get ovirt_engine_history_db_user > > > > > > make[1]: *** [Makefile:401: validations] Error 2 > > > make[1]: Leaving directory '/home/apple/git/ovirt-engine' > > > make: *** [Makefile:584: all-dev] Error 2 > > > > > > An extensive lecture from ansible, but what is this even about? > > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268 > > > > > > > > > > > > ... > > > > > > > > > ----- Original Message ----- > > > From: "Nir Soffer" < nsoffer(a)redhat.com > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana Elfassy" < > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org > > > > Sent: Wednesday, March 18, 2020 11:45:28 AM > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > > > package? > > > > > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com > > > > > wrote: > > > > > > > > For the time being I'm doing super careful clean installation of > both > > > engine and host in hopes of getting dev env working again... results > are > > > yet to be seen. > > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt > master > > > rpm for Fedora 30. Correct name for the package is > > > python3-ovirt-engine-sdk4. And more examples like that with random > package > > > renamings. > > > > > > > > README definitely needs an update. If you ask me, I would rather > provide > > > users with a single version (Fedora 30 only) of dev installation docs > that > > > works rather than with two versions that don't. > > > > > > Please do the update. > > > > > > Hopefully you will have more luck, my last README patch was abandoned > > > after > > > it was neglected by engine maintainers. > > > https://gerrit.ovirt.org/c/106467/ > > > > > > > Are there any reasons to keep CentOS 7 info there that's irrelevant > now? > > > > > > It should be dropped now. > > > > > > > I can rework the docs for FC30 eventually if no one minds. > > > > > > There is already a working fedora 30 instructions in the bottom of the > > > readme. It used to > > > work when Amit added it. > > > > > > > Or, if plans are to move to CentOS 8, maybe another brave soul can > do > > > that. > > > > Fedor > > > > > > > > ----- Original Message ----- > > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < > devel(a)ovirt.org > > > > > Sent: Tuesday, March 17, 2020 1:13:48 PM > > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > > > package? > > > > > > > > > > > > > > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < > fgavrilo(a)redhat.com > > > > wrote: > > > > > > > > > > > > I just tried installing on Fedora 30 host and error stays the same, > so > > > it's probably not as OS. Might try clean setup next, what else... > > > > > > > > Liran, do you see anything of interest when you journalctl -u > > > ansible-runner-service | grep fatal ? > > > > No, we do see a trackback on the command pointing out to > > > python3.7/site-packages/runner_service/services/jobs.py > > > > But, because breakpoint that only makes things slower, I think it's > > > timing/locking issue somehow. > > > > > > > > > > > > > > > > Fedor > > > > > > > > ----- Original Message ----- > > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy" < > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org > > > > > Sent: Tuesday, March 17, 2020 12:49:32 PM > > > > Subject: Re: [ovirt-devel] Re: what's up with > ansible-runner-service-dev > > > package? > > > > > > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < > fgavrilo(a)redhat.com > > > > wrote: > > > > > > > > > I tried installing python 2 versions of some dependencies in > addition > > > to > > > > > python 3 (as > > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc > > > > > is not clear about it at all. on Fedora 30 default versions of > these > > > > > libraries you get when not specifying python vesion in the name > are > > > python > > > > > 2.) > > > > > Now error looks slightly different :'D > > > > > > > > > > 2020-03-17 11:08:27,294+01 ERROR > > > > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID: > > > > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal > > > server > > > > > error, please check Ansible runner error log.. > > > > > > > > > > Everything else stays the same, host install fails almost > immediately. > > > > > Does someone have any notes for Fedora 30 install they can share? > > > > > > > > > I start seeing it too: > > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch > > > > python3-ansible-runner-1.3.4-2.fc30.noarch > > > > engine: > > > > http://pastebin.test.redhat.com/845373 > > > > of course no ansible log.. > > > > This is what journalctl show: > > > > http://pastebin.test.redhat.com/845375 > > > > > > > > After doing some debugging in the engine, after setting a > breakpoint in > > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with > > > Step-Over > > > > until the execution (lines 139-147) it does work. Without breaking > point > > > > and making things slower it throws the error. > Here^

> > > > > > > > > > > > > Thanks, > > > > > Fedor > > > > > > > > > > ----- Original Message ----- > > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > To: "Martin Perina" < mperina(a)redhat.com > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < > devel(a)ovirt.org > > > > > > > > > Sent: Monday, March 16, 2020 3:52:47 PM > > > > > Subject: [ovirt-devel] Re: what's up with > ansible-runner-service-dev > > > > > package? > > > > > > > > > > Sorry, my bad, it was just under my nose. Systemctl is not aware > of > > > > > gunicorn-3, but when I check journalctl for > ansible-runner-service I > > > see > > > > > the following: > > > > > > > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service. > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > +0100] > > > [2992] > > > > > [INFO] Starting gunicorn 19.9.0 > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > +0100] > > > [2992] > > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992) > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > +0100] > > > [2992] > > > > > [INFO] Using worker: sync > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > +0100] > > > [2995] > > > > > [INFO] Booting worker with pid: 2995 > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 > +0100] > > > [2997] > > > > > [INFO] Booting worker with pid: 2997 > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local > configuration > > > > > options from /etc/ansible-runner-service/config.yaml > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting > playbooks_root_dir > > > to > > > > > > > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to > root > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key > to > > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime > overrides > > > from > > > > > environment variables > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings > > > > > overridden > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local > configuration > > > > > options from /etc/ansible-runner-service/config.yaml > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting > playbooks_root_dir > > > to > > > > > > > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to > root > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key > to > > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime > overrides > > > from > > > > > environment variables > > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings > > > > > overridden > > > > > > > > > > Is that any suspicious? :) > > > > > > > > > > ----- Original Message ----- > > > > > From: "Martin Perina" < mperina(a)redhat.com > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < > devel(a)ovirt.org > > > > > > > > > Sent: Monday, March 16, 2020 3:36:40 PM > > > > > Subject: [ovirt-devel] Re: what's up with > ansible-runner-service-dev > > > > > package? > > > > > > > > > > > > > > > > > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < > fgavrilo(a)redhat.com > > > > > > > > > wrote: > > > > > > > > > > > > > > > Nothing since there is no such service (or similarly named). > > > > > Package python3-gunicorn is installed though. > > > > > > > > > > After you start ansible-runner-service service, you should see > similar > > > > > logs in journalctl: > > > > > > > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > +0100] > > > > > [1386] [INFO] Starting gunicorn 19.9.0 > > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > +0100] > > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386) > > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > +0100] > > > > > [1386] [INFO] Using worker: sync > > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 > +0100] > > > > > [1496] [INFO] Booting worker with pid: 1496 > > > > > And more if you execute some action from engine (like install new > host > > > or > > > > > upgrade a host) > > > > > > > > > > > > > > > > > > > > So does that mean that something was supposed to register it as a > > > service > > > > > but did not? > > > > > > > > > > Fedor > > > > > > > > > > ----- Original Message ----- > > > > > From: "Martin Perina" < mperina(a)redhat.com > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < > devel(a)ovirt.org > > > > > > > > > Sent: Monday, March 16, 2020 3:13:03 PM > > > > > Subject: Re: [ovirt-devel] Re: what's up with > > > ansible-runner-service-dev > > > > > package? > > > > > > > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < > fgavrilo(a)redhat.com > > > > > > > > > wrote: > > > > > > > > > > > FC30 dev env engine indeed :) I've done this before on other > OS, so > > > > > unless > > > > > > there is a blindspot somewhere in my eye it should be configured > > > fine. > > > > > > > > > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service > > > > > > ● ansible-runner-service.service - Ansible Runner Service > > > > > > Loaded: loaded > > > (/usr/lib/systemd/system/ansible-runner-service.service; > > > > > > enabled; vendor preset: disabled) > > > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; > 16min > > > ago > > > > > > Main PID: 909 (gunicorn-3) > > > > > > Tasks: 9 (limit: 4915) > > > > > > Memory: 193.4M > > > > > > CGroup: /system.slice/ansible-runner-service.service > > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > > > > > > -w 2 runner_service.wsgi:application > > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > > > > > > -w 2 runner_service.wsgi:application > > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > > > > > > -w 2 runner_service.wsgi:application > > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook > > > > > > --private-key > > > > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i > > > > > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> > > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux] > > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook > > > > > > --private-key > > > > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i > > > > > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> > > > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o > > > > > > StrictHostKeyChecking=no -o Port=22 -o > > > > > > > > > > > > > > > IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa" > > > > > > > > > > > > > > -o KbdInteractiveAu> > > > > > > > > > > > > And the config: > > > > > > > > > > > > --- > > > > > > version: 1 > > > > > > > > > > > > # playbooks_root_dir > > > > > > # location of the playbooks that the service will start > > > > > > playbooks_root_dir: > > > > > > > > > > > > > > > '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' > > > > > > > > > > > > > > # port > > > > > > # tcp port for the service to listen to > > > > > > port: 50001 > > > > > > # > > > > > > # ip_address > > > > > > # Specific IP address to bind to > > > > > > # ip_address: '0.0.0.0' > > > > > > target_user: root > > > > > > #event_cache_size: 3 > > > > > > ssh_private_key: > > > > > > > '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' > > > > > > > > > > > > /home/apple/ovirt-engine is where engine is dev-installed. Not > sure > > > what > > > > > > else to check now... > > > > > > > > > > > > > > > > Anything strange in journalctl for gunicorn-3 service? > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Martin Perina" < mperina(a)redhat.com > > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < > > > devel(a)ovirt.org > > > > > > > Sent: Monday, March 16, 2020 2:56:59 PM > > > > > > Subject: Re: [ovirt-devel] Re: what's up with > > > ansible-runner-service-dev > > > > > > package? > > > > > > > > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < > fgavrilo(a)redhat.com > > > > > > > > > > wrote: > > > > > > > > > > > > > Actually, it was too early for me to celebrate. > > > > > > > > > > > > > > On Fedora 30, the engine compiles and runs fine, but when I > try > > > adding > > > > > > the > > > > > > > host installation fails almost immediately and I get the > following > > > > > errors > > > > > > > in the engine logs: > > > > > > > > > > > > > > ERROR > > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] > > > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host > > > installation > > > > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', > 'banana': > > > > > Failed > > > > > > to > > > > > > > execute Ansible host-deploy role: Internal server error, > please > > > check > > > > > > > Ansible runner error log.. Please check logs for more details: > > > > > > > > > > > > > > > > > > > > > > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log > > > > > > > > > > > > > > > > > > > > > > There is nothing else. There is no file > > > > > > > > > > > > > > > > > > > > > > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log > > > > > > > > > > > > > > > Snapshot I'm using for the host is the same that worked just > fine > > > when > > > > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is > that an > > > > > issue? > > > > > > > > > > > > > > > > > > > As you mentioned building engine I assume you are using engine > in > > > dev > > > > > env > > > > > > on FC30, right? If so, have you manually configured > > > > > ansible-runner-service > > > > > > for dev env as mentioned in > > > > > > > > > > > > > > > > > > > > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run... > > > > > > ? > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > Fedor > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > > > To: "Martin Perina" < mperina(a)redhat.com > > > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < > > > devel(a)ovirt.org > > > > > > > > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM > > > > > > > Subject: [ovirt-devel] Re: what's up with > > > ansible-runner-service-dev > > > > > > > package? > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > Resolved through installing engine on Fedora 30. From what I > > > > > understand, > > > > > > > CentOS 7 is not supported anymore. > > > > > > > > > > > > > > Fedor > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Martin Perina" < mperina(a)redhat.com > > > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana Elfassy" < > > > > > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >, "Eyal > > > Shenitzky" > > > > > < > > > > > > > eshenitz(a)redhat.com > > > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM > > > > > > > Subject: Re: [ovirt-devel] Re: what's up with > > > > > ansible-runner-service-dev > > > > > > > package? > > > > > > > > > > > > > > Hi Fedor, > > > > > > > > > > > > > > ansible-runner-service-dev package is available from > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run... > > > > > > > repos which is included in ovirt-master-release package, which > > > > > > > includes all repositories necessary for oVirt development: > > > > > > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > > > > > > > > > > > > > Was your issue resolved or not? > > > > > > > > > > > > > > Regards, > > > > > > > Martin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < > > > eshenitz(a)redhat.com > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com > > > > > > > > > > > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < > > > bzlotnik(a)redhat.com > > > > > > > wrote: > > > > > > > > > > > > > > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3 > > > > > > > >> > > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov < > > > > > fgavrilo(a)redhat.com > > > > > > > > >> wrote: > > > > > > > >> > > > > > > > > >> > Hi Sandro, > > > > > > > >> > > > > > > > > >> > Thanks for the suggestion, but it seems to not help much. > > > > > > > >> > > > > > > > > >> > ansible-runner-service-dev still can't be found, I > checked > > > repos > > > > > > that > > > > > > > >> are installed from > > > > > > > >> > > > > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > > > > > > > >> and haven't found similarly names packages either... > > > > > > > >> > > > > > > > > >> > $ sudo yum install ansible-runner-service-dev > > > > > > > >> > Loaded plugins: fastestmirror > > > > > > > >> > Repository centos-sclo-rh-release is listed more than > once in > > > the > > > > > > > >> configuration > > > > > > > >> > Repository sac-gluster-ansible is listed more than once > in > > > the > > > > > > > >> configuration > > > > > > > >> > Determining fastest mirrors > > > > > > > >> > ovirt-4.3-epel/x86_64/metalink > > > > > > > >> > > > > > > > >> | 30 kB 00:00:00 > > > > > > > >> > ovirt-master-epel/x86_64/metalink > > > > > > > >> > > > > > > > >> | 30 kB 00:00:00 > > > > > > > >> > * base: ftp.sh.cvut.cz > > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz > > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz > > > > > > > >> > * extras: ftp.sh.cvut.cz > > > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz > > > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net > > > > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net > > > > > > > >> > * ovirt-master-epel: mirror.karneval.cz > > > > > > > >> > * ovirt-master-snapshot: ftp.plusline.net > > > > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net > > > > > > > >> > * updates: ftp.sh.cvut.cz > > > > > > > >> > base > > > > > > > >> > > > > > > > >> | 3.6 kB 00:00:00 > > > > > > > >> > centos-opstools-release > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > centos-ovirt-common-testing > > > > > > > >> > > > > > > > >> | 3.4 kB 00:00:00 > > > > > > > >> > centos-ovirt44-testing > > > > > > > >> > > > > > > > >> | 3.4 kB 00:00:00 > > > > > > > >> > centos-qemu-ev-release > > > > > > > >> > > > > > > > >> | 3.4 kB 00:00:00 > > > > > > > >> > centos-sclo-rh > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > centos-sclo-rh-release > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > centos-sclo-sclo > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > epel-apache-maven > > > > > > > >> > > > > > > > >> | 3.3 kB 00:00:00 > > > > > > > >> > extras > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-4.3-centos-gluster6 > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-4.3-centos-opstools > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-4.3-centos-ovirt43 > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-4.3-centos-qemu-ev > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-4.3-epel > > > > > > > >> > > > > > > > >> | 5.3 kB 00:00:00 > > > > > > > >> > ovirt-4.3-snapshot > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > ovirt-4.3-snapshot-static > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > ovirt-4.3-virtio-win-latest > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > ovirt-master-centos-gluster6 > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-master-centos-opstools-testing > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > ovirt-master-epel > > > > > > > >> > > > > > > > >> | 5.3 kB 00:00:00 > > > > > > > >> > ovirt-master-snapshot > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > ovirt-master-snapshot-static > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > ovirt-master-virtio-win-latest > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > ovirtwebui-ovirt-web-ui-master > > > > > > > >> > > > > > > > >> | 3.0 kB 00:00:00 > > > > > > > >> > sac-gluster-ansible > > > > > > > >> > > > > > > > >> | 3.3 kB 00:00:00 > > > > > > > >> > updates > > > > > > > >> > > > > > > > >> | 2.9 kB 00:00:00 > > > > > > > >> > (1/32): base/7/x86_64/group_gz > > > > > > > >> > > > > > > > >> | 165 kB 00:00:00 > > > > > > > >> > (2/32): base/7/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 6.0 MB 00:00:00 > > > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 4.2 MB 00:00:00 > > > > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 9.3 kB 00:00:00 > > > > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 344 kB 00:00:00 > > > > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 1.1 kB 00:00:01 > > > > > > > >> > (7/32): extras/7/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 164 kB 00:00:00 > > > > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 429 kB 00:00:01 > > > > > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 101 kB 00:00:01 > > > > > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 116 kB 00:00:00 > > > > > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 73 kB 00:00:00 > > > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz > > > > > > > >> > > > > > > > >> | 90 kB 00:00:00 > > > > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 5.0 kB 00:00:01 > > > > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo > > > > > > > >> > > > > > > > >> | 1.0 MB 00:00:00 > > > > > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 429 kB 00:00:00 > > > > > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 211 kB 00:00:00 > > > > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db > > > > > > > >> > > > > > > > >> | 3.4 kB 00:00:00 > > > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db > > > > > > > >> > > > > > > > >> | 109 kB 00:00:00 > > > > > > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 116 kB 00:00:00 > > > > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 6.7 MB 00:00:00 > > > > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz > > > > > > > >> > > > > > > > >> | 90 kB 00:00:00 > > > > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo > > > > > > > >> > > > > > > > >> | 1.0 MB 00:00:00 > > > > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db > > > > > > > >> > > > > > > > >> | 54 kB 00:00:00 > > > > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db > > > > > > > >> > > > > > > > >> | 7.6 kB 00:00:01 > > > > > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db > > > > > > > >> > > > > > > > >> | 4.6 kB 00:00:00 > > > > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 6.7 MB 00:00:00 > > > > > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db > > > > > > > >> > > > > > > > >> | 7.6 kB 00:00:00 > > > > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 4.2 MB 00:00:03 > > > > > > > >> > (29/32): updates/7/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 6.7 MB 00:00:00 > > > > > > > >> > (30/32): > > > ovirt-master-centos-opstools-testing/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 611 kB 00:00:01 > > > > > > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 2.3 kB 00:00:00 > > > > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db > > > > > > > >> > > > > > > > >> | 13 kB 00:00:00 > > > > > > > >> > No package ansible-runner-service-dev available. > > > > > > > >> > Error: Nothing to do > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > Fedor > > > > > > > >> > > > > > > > > >> > ----- Original Message ----- > > > > > > > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com > > > > > > > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >, "devel" < > > > > > > devel(a)ovirt.org > > > > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM > > > > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with > > > > > > > >> ansible-runner-service-dev package? > > > > > > > >> > > > > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov < > > > > > > > >> fgavrilo(a)redhat.com > > > > > > > > >> > ha scritto: > > > > > > > >> > > > > > > > > >> > > Thanks for the response, Eyal! > > > > > > > >> > > > > > > > > > >> > > I already had ovirt-master repo installed, but updated > > > > > everything > > > > > > > >> just in > > > > > > > >> > > case. > > > > > > > >> > > I even tried both yum and dnf (since yum on centos was > > > giving > > > > > me > > > > > > > lots > > > > > > > >> of > > > > > > > >> > > grief before and I learned their behaviour differs, > > > especially > > > > > > when > > > > > > > it > > > > > > > >> > > comes to bugs) but none works... > > > > > > > >> > > > > > > > > > >> > > >No package ansible-runner-service-dev available. > > > > > > > >> > > >No match for argument: ansible-runner-service-dev > > > > > > > >> > > > > > > > > > >> > > Fedor > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > Looks like you're trying to install > ovirt-master-snapshot on > > > el7. > > > > > > > >> > It won't work. > > > > > > > >> > Master is not supporting el7 anymore. > > > > > > > >> > You can use 4.3 snapshot rpm at : > > > > > > > >> > > > > > > > > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > > > > > > > >> if > > > > > > > >> > you need to stay on el7. > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > ----- Original Message ----- > > > > > > > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com > > > > > > > > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > > > > > > > > >> > > Cc: "devel" < devel(a)ovirt.org > > > > > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM > > > > > > > >> > > Subject: Re: [ovirt-devel] what's up with > > > > > > ansible-runner-service-dev > > > > > > > >> > > package? > > > > > > > >> > > > > > > > > > >> > > Hi Fedor, > > > > > > > >> > > > > > > > > > >> > > Please try: > > > > > > > >> > > 1. dnf install > > > > > > > >> > > > > > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > > > > > > >> > > 2. dnf update > > > > > > > >> > > 3. dnf install ansible-runner-service-dev > > > > > > > >> > > 4. flow the instruction from thread 'New dependency for > > > > > > development > > > > > > > >> > > environment' > > > > > > > >> > > The > > > > > > > >> > > > > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov < > > > > > fgavrilo(a)redhat.com > > > > > > > > > > > > > > >> wrote: > > > > > > > >> > > > > > > > > > >> > > > Hi everyone, > > > > > > > >> > > > > > > > > > > >> > > > After I screwed up my dev environment beyond repair I > > > have to > > > > > > set > > > > > > > >> it up > > > > > > > >> > > > again and I see something I haven't last time > (CentOS 7): > > > > > > > >> > > > > > > > > > > >> > > > $ sudo yum install ansible-runner-service-dev > > > > > > > >> > > > Loaded plugins: fastestmirror > > > > > > > >> > > > Loading mirror speeds from cached hostfile > > > > > > > >> > > > * base: mirror.hosting90.cz > > > > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz > > > > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz > > > > > > > >> > > > * extras: mirror.hosting90.cz > > > > > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz > > > > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl > > > > > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl > > > > > > > >> > > > * updates: mirror.hosting90.cz > > > > > > > >> > > > No package ansible-runner-service-dev available. > > > > > > > >> > > > > > > > > > > >> > > > Maybe something's missing from my notes, but where > did it > > > go? > > > > > > > >> Should I > > > > > > > >> > > add > > > > > > > >> > > > some repo? > > > > > > > >> > > > > > > > > > > >> > > > Fedor > > > > > > > >> > > > _______________________________________________ > > > > > > > >> > > > Devel mailing list -- devel(a)ovirt.org > > > > > > > >> > > > To unsubscribe send an email to > devel-leave(a)ovirt.org > > > > > > > >> > > > Privacy Statement: > > > https://www.ovirt.org/privacy-policy.html > > > > > > > >> > > > oVirt Code of Conduct: > > > > > > > >> > > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > >> > > > List Archives: > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3... > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > -- > > > > > > > >> > > Regards, > > > > > > > >> > > Eyal Shenitzky > > > > > > > >> > > _______________________________________________ > > > > > > > >> > > Devel mailing list -- devel(a)ovirt.org > > > > > > > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > > > >> > > Privacy Statement: > > > https://www.ovirt.org/privacy-policy.html > > > > > > > >> > > oVirt Code of Conduct: > > > > > > > >> > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > >> > > List Archives: > > > > > > > >> > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV... > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > -- > > > > > > > >> > > > > > > > > >> > Sandro Bonazzola > > > > > > > >> > > > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > > > > > > >> > > > > > > > > >> > Red Hat EMEA < https://www.redhat.com/ > > > > > > > > >> > > > > > > > > >> > sbonazzo(a)redhat.com > > > > > > > >> > < https://www.redhat.com/ >*Red Hat respects your work > life > > > > > balance. > > > > > > > >> > Therefore there is no need to answer this email out of > your > > > > > office > > > > > > > >> hours. > > > > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >* > > > > > > > >> > _______________________________________________ > > > > > > > >> > Devel mailing list -- devel(a)ovirt.org > > > > > > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > > > >> > Privacy Statement: > https://www.ovirt.org/privacy-policy.html > > > > > > > >> > oVirt Code of Conduct: > > > > > > > >> > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > >> > List Archives: > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN... > > > > > > > >> _______________________________________________ > > > > > > > >> Devel mailing list -- devel(a)ovirt.org > > > > > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > > > >> Privacy Statement: > https://www.ovirt.org/privacy-policy.html > > > > > > > >> oVirt Code of Conduct: > > > > > > > >> > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > >> List Archives: > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3... > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > Regards, > > > > > > > > Eyal Shenitzky > > > > > > > > _______________________________________________ > > > > > > > > Devel mailing list -- devel(a)ovirt.org > > > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > > > > Privacy Statement: > https://www.ovirt.org/privacy-policy.html > > > > > > > > oVirt Code of Conduct: > > > > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > > List Archives: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Martin Perina > > > > > > > Manager, Software Engineering > > > > > > > Red Hat Czech s.r.o. > > > > > > > _______________________________________________ > > > > > > > Devel mailing list -- devel(a)ovirt.org > > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > > > > oVirt Code of Conduct: > > > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > > > List Archives: > > > > > > > > > > > > > > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ... > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > Martin Perina > > > > > > Manager, Software Engineering > > > > > > Red Hat Czech s.r.o. > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Martin Perina > > > > > Manager, Software Engineering > > > > > Red Hat Czech s.r.o. > > > > > > > > > > > > > > > > > > > > -- > > > > > Martin Perina > > > > > Manager, Software Engineering > > > > > Red Hat Czech s.r.o. > > > > > > > > > > _______________________________________________ > > > > > Devel mailing list -- devel(a)ovirt.org > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > > oVirt Code of Conduct: > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > List Archives: > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7... > > > > > _______________________________________________ > > > > > Devel mailing list -- devel(a)ovirt.org > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > > oVirt Code of Conduct: > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > List Archives: > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC... > > > > > _______________________________________________ > > > > > Devel mailing list -- devel(a)ovirt.org > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > > oVirt Code of Conduct: > > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > > List Archives: > > > > > > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ... > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Devel mailing list -- devel(a)ovirt.org > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F... > > > > _______________________________________________ > > > > Devel mailing list -- devel(a)ovirt.org > > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ... > > > _______________________________________________ > > > Devel mailing list -- devel(a)ovirt.org > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF... > > > > > > > > > _______________________________________________ > > > Devel mailing list -- devel(a)ovirt.org > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7... > > > _______________________________________________ > > > Devel mailing list -- devel(a)ovirt.org > > > To unsubscribe send an email to devel-leave(a)ovirt.org > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC... > > > > > > > > > -- > > Martin Perina > > Manager, Software Engineering > > Red Hat Czech s.r.o. > > _______________________________________________ > > Devel mailing list -- devel(a)ovirt.org > > To unsubscribe send an email to devel-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ... > _______________________________________________ > Devel mailing list -- devel(a)ovirt.org > To unsubscribe send an email to devel-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5... > _______________________________________________ > Devel mailing list -- devel(a)ovirt.org > To unsubscribe send an email to devel-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ... > -- Regards, Eyal Shenitzky