8:24 a.m.
----- Original Message -----
From: "Alona Kaplan" <alkaplan(a)redhat.com>
To: "Simon Grinberg" <simon(a)redhat.com>
Cc: engine-devel(a)ovirt.org, "Muli Salem" <msalem(a)redhat.com>, "Moti
Asayag" <masayag(a)redhat.com>, "Avi Tal"
<atal(a)redhat.com>, "Yaniv Kaul" <ykaul(a)redhat.com>
Sent: Wednesday, October 10, 2012 2:12:10 PM
Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
So the conclusion is to leave the General tab but make the vm tab the
default one?
Depends on other inputs as well, currently you have one that thinks is should be removed
and one the thinks it should remain for future values :)
There is no indication for the management networks except of the
name. The name can be bold or we can add extra column to indicate
it.
+1 for another column, remember that in the future we should probably allow different
names for this network.
In addition this tab is common to all the DC, meaning more then one of these networks.
Hopefully when you'll get sort by column this should be one of the attributes to sort
by.
----- Original Message -----
> From: "Simon Grinberg" <simon(a)redhat.com>
> To: "Alona Kaplan" <alkaplan(a)redhat.com>
> Cc: engine-devel(a)ovirt.org, "Muli Salem" <msalem(a)redhat.com>,
"Moti
> Asayag" <masayag(a)redhat.com>, "Avi Tal"
> <atal(a)redhat.com>, "Yaniv Kaul" <ykaul(a)redhat.com>
> Sent: Wednesday, October 10, 2012 1:40:18 PM
> Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
>
>
>
> ----- Original Message -----
> > From: "Alona Kaplan" <alkaplan(a)redhat.com>
> > To: "Simon Grinberg" <sgrinber(a)redhat.com>
> > Cc: engine-devel(a)ovirt.org, "Muli Salem" <msalem(a)redhat.com>,
> > "Moti
> > Asayag" <masayag(a)redhat.com>, "Avi Tal"
> > <atal(a)redhat.com>, "Yaniv Kaul" <ykaul(a)redhat.com>
> > Sent: Wednesday, October 10, 2012 10:39:50 AM
> > Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
> >
> > I agree.
> >
> > Simon, what do you think?
> >
> > ----- Original Message -----
> > > From: "Yaniv Kaul" <ykaul(a)redhat.com>
> > > To: "Alona Kaplan" <alkaplan(a)redhat.com>
> > > Cc: engine-devel(a)ovirt.org, "Muli Salem"
<msalem(a)redhat.com>,
> > > "Moti
> > > Asayag" <masayag(a)redhat.com>, "Avi Tal"
> > > <atal(a)redhat.com>, "Simon Grinberg"
<sgrinber(a)redhat.com>
> > > Sent: Tuesday, October 9, 2012 5:01:39 PM
> > > Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
> > >
> > > On 10/09/2012 11:34 AM, Alona Kaplan wrote:
> > > > The wiki was updated with the final design.
> > > > http://wiki.ovirt.org/wiki/Feature/NetworkMainTab
> > > >
> > > > Thanks for the comments,
> > > > Alona.
> > >
> > > Is the general sub-tab providing any information not available
> > > in
> > > the
> > > grid already?
> > > If not, lets drop it.
>
> How complicated it will be to re-add it later?
>
> There is no added information in this tab since right now there is
> not much to report, everything can easily fit into the columns. But
> thinking forward you may have other values and properties.
>
> Just throwing some here not necessary for the near future so don't
> be
> alarmed, some may not/probably won't land in the general tab or the
> network main tab:
> - VM network / Storage / Migration / Management (*PS what is the
> current indication in this tab for management networks except for
> their names?)
> - Provider type - like external manager (Plug-in)/internal/etc (not
> sure it's a main tab item, but ... )
> - Mutually exclusive? Redundancy? other properties.
> - Last modified by ___ (It's a property that I would have loved to
> see on all objects instead of searching the event log)
> - Modification date
> - Global SLA Policy (for hierarchical SLA)
>
> I think you got the drift
> And let's not forget 'Description' may not fully fit in it's column
>
> I think it's worth to have it now then to add it later when the
> need
> compels it. But not feeling too strongly one way or the other.
>
>
> > > And while it's also consistent to show the clusters as the
> > > second
> > > (or
> > > now, after the above suggestion first) sub-tab, it's not an
> > > interesting
> > > tab. I suggest the default when clicking on a network is to
> > > show
> > > the
> > > VMs
> > > tab (so while the order of the tabs is not changed, the default
> > > shown
> > > is).
>
> +1
>
> > > Y.
> > >
> > >
> > > >
> > > > ----- Original Message -----
> > > >> From: "Simon Grinberg" <simon(a)redhat.com>
> > > >> To: "Alona Kaplan" <alkaplan(a)redhat.com>
> > > >> Cc: engine-devel(a)ovirt.org
> > > >> Sent: Tuesday, October 2, 2012 7:36:44 PM
> > > >> Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
> > > >>
> > > >> Trying to sum up some of the suggestions ('coincidently'
> > > >> dropping
> > > >> those which I think a bit too much for first implementation
> > > >> :))
> > > >> and
> > > >> add some suggestions of my own
> > > >>
> > > >> 1. On the hosts subtab:
> > > >> 1.1 Have a radio button that will show either
> > > >> 1.1.1 All the hosts that this network is attached to
> > > >> 1.1.2 All the hosts where this network attached to
> > > >> the
> > > >> cluster
> > > >> but not to the host (Very important for non-required
> > > >> where
> > > >> the host status does not indicate something is
> > > >> missing)
> > > >> 1.2 Have a remove button for 1.1.1, ManageNetworks
> > > >> button
> > > >> for
> > > >> 1.1.2. Simple add will not do since you don't know where
> > > >> to
> > > >> add.
> > > >>
> > > >> 2. On the vms subtab
> > > >> 2.1 Have a radio button that will show either
> > > >> 2.1.1 All the vms that this network is attached to
> > > >> 2.1.2 All the vms where this network is not attached
> > > >> to
> > > >> 2.2 Have a 'remove' button for 2.1.1, Have
'add' button
> > > >> for
> > > >> 2.1.2
> > > >> 2.3 Allow multiple selection for both actions of 2.2
> > > >> 2.4 Add remove from all button.
> > > >> 2.5 I would not bother to show all the nics attached to
> > > >> the
> > > >> VM
> > > >> from the same network, it's too rare. Just make sure
> > > >> there
> > > >> is
> > > >> no
> > > >> exception if this does exist. So the columns should have
> > > >> 'nic'
> > > >> as
> > > >> the first and there should be only one VM per line. If
> > > >> there
> > > >> are
> > > >> more then one nic per VM then just indicate
'multiple'
> > > >>
> > > >> 3. Templates subtab - same as VM, drop the expansion of the
> > > >> NICs
> > > >> list.
> > > >>
> > > >> 4. Clusters subtab
> > > >> Allow assign to multiple clusters - same as the edit in
> > > >> the
> > > >> data
> > > >> center tab (Just use the same dialogue)
> > > >>
> > > >> 5. Main: You have enough space then why not add the MTU
> > > >> column?
> > > >>
> > > >> 6. Queries for the sub tabs: For each needs the reverse
> > > >> query
> > > >> as
> > > >> well
> > > >> (Probably more important when adding new network)
> > > >>
> > > >>
> > > >> Oops, I think I mostly added and dropped (almost) nothing :)
> > > >>
> > > >> Regards,
> > > >> Simon
> > > >>
> > > >>
> > > >> ----- Original Message -----
> > > >>> From: "Avi Tal" <atal(a)redhat.com>
> > > >>> To: "Yaniv Kaul" <ykaul(a)redhat.com>
> > > >>> Cc: engine-devel(a)ovirt.org
> > > >>> Sent: Monday, September 24, 2012 10:13:52 AM
> > > >>> Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
> > > >>>
> > > >>>
> > > >>>
> > > >>> ----- Original Message -----
> > > >>>> From: "Yaniv Kaul" <ykaul(a)redhat.com>
> > > >>>> To: "Moti Asayag" <masayag(a)redhat.com>
> > > >>>> Cc: engine-devel(a)ovirt.org
> > > >>>> Sent: Sunday, September 23, 2012 6:16:47 PM
> > > >>>> Subject: Re: [Engine-devel] RFE: Netwrok Main Tab
> > > >>>>
> > > >>>> On 09/23/2012 06:12 PM, Moti Asayag wrote:
> > > >>>>> On 09/23/2012 05:01 PM, Yaniv Kaul wrote:
> > > >>>>>> On 09/23/2012 04:55 PM, Alona Kaplan wrote:
> > > >>>>>>> ----- Original Message -----
> > > >>>>>>>> From: "Avi Tal"
<atal(a)redhat.com>
> > > >>>>>>>> To: "Alona Kaplan"
<alkaplan(a)redhat.com>
> > > >>>>>>>> Cc: engine-devel(a)ovirt.org
> > > >>>>>>>> Sent: Sunday, September 23, 2012 4:17:26
PM
> > > >>>>>>>> Subject: Re: [Engine-devel] RFE: Netwrok
Main Tab
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>> ----- Original Message -----
> > > >>>>>>>>> From: "Alona Kaplan"
<alkaplan(a)redhat.com>
> > > >>>>>>>>> To: "Avi Tal"
<atal(a)redhat.com>
> > > >>>>>>>>> Cc: engine-devel(a)ovirt.org
> > > >>>>>>>>> Sent: Sunday, September 23, 2012
1:31:32 PM
> > > >>>>>>>>> Subject: Re: [Engine-devel] RFE:
Netwrok Main Tab
> > > >>>>>>>>>
> > > >>>>>>>>> 1. What actions do you suggest to
add?
> > > >>>>>>>> Add, Edit and remove actions of each
component.
> > > >>>>>>>>
> > > >>>>>>> Host:
> > > >>>>>>> Add- What will add action on
Networks->Hosts sub tab
> > > >>>>>>> do?
> > > >>>>>>> Choose
> > > >>>>>>> an
> > > >>>>>>> existing host and attach the network to one
of its
> > > >>>>>>> nics?
> > > >>>>>>> How will it work? after choosing the host you
will open
> > > >>>>>>> setupNetworks
> > > >>>>>>> window and just enable dragging of the
selected network
> > > >>>>>>> (in
> > > >>>>>>> the
> > > >>>>>>> main
> > > >>>>>>> tab) to a nic? I think it is too much.
> > > >>>>>>>
> > > >>>>>>> Edit- same as add.
> > > >>>>>>>
> > > >>>>>>> Remove- What is the meaning of Remove host in
network's
> > > >>>>>>> context?
> > > >>>>>>> The
> > > >>>>>>> network will be detached from the host? I
think it is
> > > >>>>>>> confusing.
> > > >>>>>>>
> > > >>>>>>> Vm/Template:
> > > >>>>>>> Add: What will it do? You will choose a vm
and then add
> > > >>>>>>> a
> > > >>>>>>> vnic
> > > >>>>>>> to
> > > >>>>>>> the
> > > >>>>>>> vm? Where will you see the vnic details?
> > > >>>>>>> Edit: Same as add.
> > > >>>>>>> Remove: You will remove all the vnics that
use the
> > > >>>>>>> selected
> > > >>>>>>> network
> > > >>>>>>> from the vm? Or do you mean to add a remove
per vnic?
> > > >>>>>> For all the above: yes.
> > > >>>>>> We can certainly work on the small details, but
having a
> > > >>>>>> main
> > > >>>>>> tab
> > > >>>>>> with
> > > >>>>>> little to no action whatsoever is kinda
disappointing.
> > > >>>>> IMO adding 'assign' action in the main tab
might be handy
> > > >>>>> in
> > > >>>>> order
> > > >>>>> to
> > > >>>>> assign a single network in a single dialog to
several
> > > >>>>> clusters.
> > > >>>>>
> > > >>>>> However It is not clear to me how Add/Edit for a VM
in a
> > > >>>>> sub-tab
> > > >>>>> should
> > > >>>>> look like. The VM should have a list of interfaces
> > > >>>>> (represented
> > > >>>>> as
> > > >>>>> sub
> > > >>>>> collection/tree).
> > > >>>> I was thinking more of right-click on the network,
> > > >>>> selecting
> > > >>>> 'Add
> > > >>>> to
> > > >>>> VM'
> > > >>>> and then selecting single/mutliple VMs from a dialog
with
> > > >>>> all
> > > >>>> the
> > > >>>> VMs
> > > >>>> (yes, filtered via search).
> > > >>>> Y.
> > > >>>>
> > > >>> +1
> > > >>>
> > > >>>>> What will be the meaning of 'Add' in that
context? Since
> > > >>>>> the
> > > >>>>> VM
> > > >>>>> already
> > > >>>>> have a vNIC attached to that network. If adding
another
> > > >>>>> once,
> > > >>>>> it
> > > >>>>> should
> > > >>>>> be enabled on the record representing the VM itself
which
> > > >>>>> will
> > > >>>>> confuse
> > > >>>>> the user.
> > > >>>>> Same goes for 'Edit' of a VM interface under
a context of
> > > >>>>> a
> > > >>>>> specific
> > > >>>>> network: in the current 'Edit VM Interface'
you can
> > > >>>>> change
> > > >>>>> the
> > > >>>>> network.
> > > >>>>> Should the same dialog be used here as well?
> > > >>>>>
> > > >>>>> The 'Remove' option is the clearer action on
this
> > > >>>>> context.
> > > >>>>>
> > > >>>>>
> > > >>>>>> (example of 'small details' - yes, when
clicking remove
> > > >>>>>> for
> > > >>>>>> a
> > > >>>>>> VM/template - it will remove all vNICs that use
that
> > > >>>>>> network
> > > >>>>>> from
> > > >>>>>> the
> > > >>>>>> VM. A VM with more than one vNIC on the same
network is
> > > >>>>>> not
> > > >>>>>> the
> > > >>>>>> common
> > > >>>>>> case anyway, and if you want to remove just a
single
> > > >>>>>> vNIC,
> > > >>>>>> go
> > > >>>>>> to
> > > >>>>>> the
> > > >>>>>> VM). I think we can also live with Add/Remove
only, and
> > > >>>>>> 'defer'
> > > >>>>>> the edit
> > > >>>>>> actions to the respectable objects
(host/vm/template)
> > > >>>>>> edit
> > > >>>>>> dialog
> > > >>>>>> boxes
> > > >>>>>> that originates from their own main tab.
> > > >>>>>>
> > > >>>>>> Y.
> > > >>>>>>
> > > >>>>>>>>> 2. I don't understand your
suggestion. You mean add
> > > >>>>>>>>> SetupNetworks
> > > >>>>>>>>> to
> > > >>>>>>>>> the Networks main tab?
> > > >>>>>>>> No.
> > > >>>>>>>> Just Thinking of a nice display which
will present
> > > >>>>>>>> logical
> > > >>>>>>>> network
> > > >>>>>>>> and his connected host/vm configuration
instead of
> > > >>>>>>>> passing
> > > >>>>>>>> through
> > > >>>>>>>> dub-tabs
> > > >>>>>>>> I should give it a deeper thought.
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>> ----- Original Message -----
> > > >>>>>>>>>> From: "Avi Tal"
<atal(a)redhat.com>
> > > >>>>>>>>>> To: "Alona Kaplan"
<alkaplan(a)redhat.com>
> > > >>>>>>>>>> Cc: engine-devel(a)ovirt.org
> > > >>>>>>>>>> Sent: Thursday, September 20,
2012 6:58:05 PM
> > > >>>>>>>>>> Subject: Re: [Engine-devel] RFE:
Netwrok Main Tab
> > > >>>>>>>>>>
> > > >>>>>>>>>> 1. Why not having Actions for
Hosts, Vms and
> > > >>>>>>>>>> Templates
> > > >>>>>>>>>> ?
> > > >>>>>>>>>> I believe we should have those
actions instead of
> > > >>>>>>>>>> making
> > > >>>>>>>>>> the
> > > >>>>>>>>>> user
> > > >>>>>>>>>> browse between 'network ->
vms -> network (sub tab)'
> > > >>>>>>>>>> just
> > > >>>>>>>>>> in
> > > >>>>>>>>>> order
> > > >>>>>>>>>> to update VM's network.
> > > >>>>>>>>>>
> > > >>>>>>>>>> 2. Why having such a big window
which most of the
> > > >>>>>>>>>> time
> > > >>>>>>>>>> will
> > > >>>>>>>>>> be
> > > >>>>>>>>>> empty?
> > > >>>>>>>>>> How many logical network
would be existed in
> > > >>>>>>>>>> the
> > > >>>>>>>>>> system?
> > > >>>>>>>>>> My suggestion is to go for
more graphical
> > > >>>>>>>>>> window
> > > >>>>>>>>>> which
> > > >>>>>>>>>> will
> > > >>>>>>>>>> present:
> > > >>>>>>>>>> A. logical networks
> > > >>>>>>>>>> B. Multiple networks with
the host
> > > >>>>>>>>>> configurations
> > > >>>>>>>>>> at
> > > >>>>>>>>>> the
> > > >>>>>>>>>> same
> > > >>>>>>>>>> window: very important
because most of the
> > > >>>>>>>>>> System
> > > >>>>>>>>>> admins
> > > >>>>>>>>>> would
> > > >>>>>>>>>> like to have a bigger
picture of the entire
> > > >>>>>>>>>> network
> > > >>>>>>>>>> configuration
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> ----- Original Message -----
> > > >>>>>>>>>> From: "Alona Kaplan"
<alkaplan(a)redhat.com>
> > > >>>>>>>>>> To: engine-devel(a)ovirt.org
> > > >>>>>>>>>> Sent: Thursday, September 20,
2012 1:50:15 PM
> > > >>>>>>>>>> Subject: [Engine-devel] RFE:
Netwrok Main Tab
> > > >>>>>>>>>>
> > > >>>>>>>>>> Hi all,
> > > >>>>>>>>>>
> > > >>>>>>>>>> Please review the wiki and add
your comments.
> > > >>>>>>>>>>
> > > >>>>>>>>>>
http://wiki.ovirt.org/wiki/Feature/NetworkMainTab
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> RFE:
> > > >>>>>>>>>>
https://bugzilla.redhat.com/858742
> > > >>>>>>>>>>
> > > >>>>>>>>>> Thanks,
> > > >>>>>>>>>> Alona.
> > > >>>>>>>>>>
_______________________________________________
> > > >>>>>>>>>> Engine-devel mailing list
> > > >>>>>>>>>> Engine-devel(a)ovirt.org
> > > >>>>>>>>>>
http://lists.ovirt.org/mailman/listinfo/engine-devel
> > > >>>>>>>>>>
> > > >>>>>>>
_______________________________________________
> > > >>>>>>> Engine-devel mailing list
> > > >>>>>>> Engine-devel(a)ovirt.org
> > > >>>>>>>
http://lists.ovirt.org/mailman/listinfo/engine-devel
> > > >>>>>> _______________________________________________
> > > >>>>>> Engine-devel mailing list
> > > >>>>>> Engine-devel(a)ovirt.org
> > > >>>>>>
http://lists.ovirt.org/mailman/listinfo/engine-devel
> > > >>>> _______________________________________________
> > > >>>> Engine-devel mailing list
> > > >>>> Engine-devel(a)ovirt.org
> > > >>>> http://lists.ovirt.org/mailman/listinfo/engine-devel
> > > >>>>
> > > >>> _______________________________________________
> > > >>> Engine-devel mailing list
> > > >>> Engine-devel(a)ovirt.org
> > > >>> http://lists.ovirt.org/mailman/listinfo/engine-devel
> > > >>>
> > >
> > >
> >
>