[ovirt-devel] Re: what's up with ansible-runner-service-dev package?

FC30 dev env engine indeed :) I've done this before on other OS, so unless there is a blindspot somewhere in my eye it should be configured fine. [apple@apple ~]$ sudo systemctl status ansible-runner-service ● ansible-runner-service.service - Ansible Runner Service Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service; enabled; vendor preset: disabled) Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago Main PID: 909 (gunicorn-3) Tasks: 9 (limit: 4915) Memory: 193.4M CGroup: /system.slice/ansible-runner-service.service ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2 runner_service.wsgi:application ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2 runner_service.wsgi:application ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2 runner_service.wsgi:application ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook --private-key /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux] ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook --private-key /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o Port=22 -o IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa" -o KbdInteractiveAu> And the config: --- version: 1 # playbooks_root_dir # location of the playbooks that the service will start playbooks_root_dir: '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' # port # tcp port for the service to listen to port: 50001 # # ip_address # Specific IP address to bind to # ip_address: '0.0.0.0' target_user: root #event_cache_size: 3 ssh_private_key: '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' /home/apple/ovirt-engine is where engine is dev-installed. Not sure what else to check now...

----- Original Message ----- From: "Martin Perina" <mperina(a)redhat.com&gt; To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; Cc: "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; Sent: Monday, March 16, 2020 2:56:59 PM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package? On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <fgavrilo(a)redhat.com&gt; wrote: > Actually, it was too early for me to celebrate. > > On Fedora 30, the engine compiles and runs fine, but when I try adding the > host installation fails almost immediately and I get the following errors > in the engine logs: > > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana': Failed to > execute Ansible host-deploy role: Internal server error, please check > Ansible runner error log.. Please check logs for more details: > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log > > There is nothing else. There is no file > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log > Snapshot I'm using for the host is the same that worked just fine when > engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue? > As you mentioned building engine I assume you are using engine in dev env on FC30, right? If so, have you manually configured ansible-runner-service for dev env as mentioned in https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run... ? > Thanks, > Fedor > > ----- Original Message ----- > From: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > To: "Martin Perina" <mperina(a)redhat.com&gt; > Cc: "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; > Sent: Monday, March 16, 2020 12:37:44 PM > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > Hi, > > Resolved through installing engine on Fedora 30. From what I understand, > CentOS 7 is not supported anymore. > > Fedor > > ----- Original Message ----- > From: "Martin Perina" <mperina(a)redhat.com&gt; > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com&gt;, "Dana Elfassy" < > delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt;, "Eyal Shenitzky" < > eshenitz(a)redhat.com&gt; > Sent: Monday, March 16, 2020 8:11:35 AM > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > Hi Fedor, > > ansible-runner-service-dev package is available from > > https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run... > repos which is included in ovirt-master-release package, which > includes all repositories necessary for oVirt development: > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > Was your issue resolved or not? > > Regards, > Martin > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com&gt; > wrote: > > > Adding also +Dana Elfassy <delfassy(a)redhat.com&gt; > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com&gt; wrote: > > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3 > >> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com&gt; > >> wrote: > >> > > >> > Hi Sandro, > >> > > >> > Thanks for the suggestion, but it seems to not help much. > >> > > >> > ansible-runner-service-dev still can't be found, I checked repos that > >> are installed from > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > >> and haven't found similarly names packages either... > >> > > >> > $ sudo yum install ansible-runner-service-dev > >> > Loaded plugins: fastestmirror > >> > Repository centos-sclo-rh-release is listed more than once in the > >> configuration > >> > Repository sac-gluster-ansible is listed more than once in the > >> configuration > >> > Determining fastest mirrors > >> > ovirt-4.3-epel/x86_64/metalink > >> > >> | 30 kB 00:00:00 > >> > ovirt-master-epel/x86_64/metalink > >> > >> | 30 kB 00:00:00 > >> > * base: ftp.sh.cvut.cz > >> > * centos-sclo-rh: ftp.sh.cvut.cz > >> > * centos-sclo-sclo: ftp.sh.cvut.cz > >> > * extras: ftp.sh.cvut.cz > >> > * ovirt-4.3-epel: mirror.karneval.cz > >> > * ovirt-4.3-snapshot: ftp.plusline.net > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net > >> > * ovirt-master-epel: mirror.karneval.cz > >> > * ovirt-master-snapshot: ftp.plusline.net > >> > * ovirt-master-snapshot-static: ftp.plusline.net > >> > * updates: ftp.sh.cvut.cz > >> > base > >> > >> | 3.6 kB 00:00:00 > >> > centos-opstools-release > >> > >> | 2.9 kB 00:00:00 > >> > centos-ovirt-common-testing > >> > >> | 3.4 kB 00:00:00 > >> > centos-ovirt44-testing > >> > >> | 3.4 kB 00:00:00 > >> > centos-qemu-ev-release > >> > >> | 3.4 kB 00:00:00 > >> > centos-sclo-rh > >> > >> | 3.0 kB 00:00:00 > >> > centos-sclo-rh-release > >> > >> | 3.0 kB 00:00:00 > >> > centos-sclo-sclo > >> > >> | 2.9 kB 00:00:00 > >> > epel-apache-maven > >> > >> | 3.3 kB 00:00:00 > >> > extras > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-4.3-centos-gluster6 > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-4.3-centos-opstools > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-4.3-centos-ovirt43 > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-4.3-centos-qemu-ev > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-4.3-epel > >> > >> | 5.3 kB 00:00:00 > >> > ovirt-4.3-snapshot > >> > >> | 3.0 kB 00:00:00 > >> > ovirt-4.3-snapshot-static > >> > >> | 3.0 kB 00:00:00 > >> > ovirt-4.3-virtio-win-latest > >> > >> | 3.0 kB 00:00:00 > >> > ovirt-master-centos-gluster6 > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-master-centos-opstools-testing > >> > >> | 2.9 kB 00:00:00 > >> > ovirt-master-epel > >> > >> | 5.3 kB 00:00:00 > >> > ovirt-master-snapshot > >> > >> | 3.0 kB 00:00:00 > >> > ovirt-master-snapshot-static > >> > >> | 3.0 kB 00:00:00 > >> > ovirt-master-virtio-win-latest > >> > >> | 3.0 kB 00:00:00 > >> > ovirtwebui-ovirt-web-ui-master > >> > >> | 3.0 kB 00:00:00 > >> > sac-gluster-ansible > >> > >> | 3.3 kB 00:00:00 > >> > updates > >> > >> | 2.9 kB 00:00:00 > >> > (1/32): base/7/x86_64/group_gz > >> > >> | 165 kB 00:00:00 > >> > (2/32): base/7/x86_64/primary_db > >> > >> | 6.0 MB 00:00:00 > >> > (3/32): centos-sclo-rh/x86_64/primary_db > >> > >> | 4.2 MB 00:00:00 > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db > >> > >> | 9.3 kB 00:00:00 > >> > (5/32): centos-sclo-sclo/x86_64/primary_db > >> > >> | 344 kB 00:00:00 > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db > >> > >> | 1.1 kB 00:00:01 > >> > (7/32): extras/7/x86_64/primary_db > >> > >> | 164 kB 00:00:00 > >> > (8/32): centos-opstools-release/x86_64/primary_db > >> > >> | 429 kB 00:00:01 > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db > >> > >> | 101 kB 00:00:01 > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db > >> > >> | 116 kB 00:00:00 > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db > >> > >> | 73 kB 00:00:00 > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz > >> > >> | 90 kB 00:00:00 > >> > (13/32): epel-apache-maven/x86_64/primary_db > >> > >> | 5.0 kB 00:00:01 > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo > >> > >> | 1.0 MB 00:00:00 > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db > >> > >> | 429 kB 00:00:00 > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db > >> > >> | 211 kB 00:00:00 > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db > >> > >> | 3.4 kB 00:00:00 > >> > (18/32): ovirt-4.3-snapshot/7/primary_db > >> > >> | 109 kB 00:00:00 > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db > >> > >> | 116 kB 00:00:00 > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db > >> > >> | 6.7 MB 00:00:00 > >> > (21/32): ovirt-master-epel/x86_64/group_gz > >> > >> | 90 kB 00:00:00 > >> > (22/32): ovirt-master-epel/x86_64/updateinfo > >> > >> | 1.0 MB 00:00:00 > >> > (23/32): ovirt-master-snapshot/7/primary_db > >> > >> | 54 kB 00:00:00 > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db > >> > >> | 7.6 kB 00:00:01 > >> > (25/32): ovirt-master-snapshot-static/7/primary_db > >> > >> | 4.6 kB 00:00:00 > >> > (26/32): ovirt-master-epel/x86_64/primary_db > >> > >> | 6.7 MB 00:00:00 > >> > (27/32): ovirt-master-virtio-win-latest/primary_db > >> > >> | 7.6 kB 00:00:00 > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db > >> > >> | 4.2 MB 00:00:03 > >> > (29/32): updates/7/x86_64/primary_db > >> > >> | 6.7 MB 00:00:00 > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db > >> > >> | 611 kB 00:00:01 > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db > >> > >> | 2.3 kB 00:00:00 > >> > (32/32): sac-gluster-ansible/x86_64/primary_db > >> > >> | 13 kB 00:00:00 > >> > No package ansible-runner-service-dev available. > >> > Error: Nothing to do > >> > > >> > > >> > Fedor > >> > > >> > ----- Original Message ----- > >> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com&gt; > >> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > >> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com&gt;, "devel" < devel(a)ovirt.org&gt; > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM > >> > Subject: Re: [ovirt-devel] Re: what's up with > >> ansible-runner-service-dev package? > >> > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov < > >> fgavrilo(a)redhat.com&gt; > >> > ha scritto: > >> > > >> > > Thanks for the response, Eyal! > >> > > > >> > > I already had ovirt-master repo installed, but updated everything > >> just in > >> > > case. > >> > > I even tried both yum and dnf (since yum on centos was giving me > lots > >> of > >> > > grief before and I learned their behaviour differs, especially when > it > >> > > comes to bugs) but none works... > >> > > > >> > > >No package ansible-runner-service-dev available. > >> > > >No match for argument: ansible-runner-service-dev > >> > > > >> > > Fedor > >> > > > >> > > > >> > Looks like you're trying to install ovirt-master-snapshot on el7. > >> > It won't work. > >> > Master is not supporting el7 anymore. > >> > You can use 4.3 snapshot rpm at : > >> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > >> if > >> > you need to stay on el7. > >> > > >> > > >> > > ----- Original Message ----- > >> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com&gt; > >> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; > >> > > Cc: "devel" <devel(a)ovirt.org&gt; > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM > >> > > Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev > >> > > package? > >> > > > >> > > Hi Fedor, > >> > > > >> > > Please try: > >> > > 1. dnf install > >> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > >> > > 2. dnf update > >> > > 3. dnf install ansible-runner-service-dev > >> > > 4. flow the instruction from thread 'New dependency for development > >> > > environment' > >> > > The > >> > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com > > >> wrote: > >> > > > >> > > > Hi everyone, > >> > > > > >> > > > After I screwed up my dev environment beyond repair I have to set > >> it up > >> > > > again and I see something I haven't last time (CentOS 7): > >> > > > > >> > > > $ sudo yum install ansible-runner-service-dev > >> > > > Loaded plugins: fastestmirror > >> > > > Loading mirror speeds from cached hostfile > >> > > > * base: mirror.hosting90.cz > >> > > > * centos-sclo-rh: mirror.hosting90.cz > >> > > > * centos-sclo-sclo: mirror.hosting90.cz > >> > > > * extras: mirror.hosting90.cz > >> > > > * ovirt-master-epel: mirror.hosting90.cz > >> > > > * ovirt-master-snapshot: ftp.nluug.nl > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl > >> > > > * updates: mirror.hosting90.cz > >> > > > No package ansible-runner-service-dev available. > >> > > > > >> > > > Maybe something's missing from my notes, but where did it go? > >> Should I > >> > > add > >> > > > some repo? > >> > > > > >> > > > Fedor > >> > > > _______________________________________________ > >> > > > Devel mailing list -- devel(a)ovirt.org > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org > >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > > oVirt Code of Conduct: > >> > > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > > List Archives: > >> > > > > >> > > > >> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3... > >> > > > > >> > > > >> > > > >> > > -- > >> > > Regards, > >> > > Eyal Shenitzky > >> > > _______________________________________________ > >> > > Devel mailing list -- devel(a)ovirt.org > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org > >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > > oVirt Code of Conduct: > >> > > https://www.ovirt.org/community/about/community-guidelines/ > >> > > List Archives: > >> > > > >> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV... > >> > > > >> > > >> > > >> > -- > >> > > >> > Sandro Bonazzola > >> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > >> > > >> > Red Hat EMEA <https://www.redhat.com/> > >> > > >> > sbonazzo(a)redhat.com > >> > <https://www.redhat.com/>*Red Hat respects your work life balance. > >> > Therefore there is no need to answer this email out of your office > >> hours. > >> > <https://mojo.redhat.com/docs/DOC-1199578>* > >> > _______________________________________________ > >> > Devel mailing list -- devel(a)ovirt.org > >> > To unsubscribe send an email to devel-leave(a)ovirt.org > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> > oVirt Code of Conduct: > >> https://www.ovirt.org/community/about/community-guidelines/ > >> > List Archives: > >> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN... > >> _______________________________________________ > >> Devel mailing list -- devel(a)ovirt.org > >> To unsubscribe send an email to devel-leave(a)ovirt.org > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> oVirt Code of Conduct: > >> https://www.ovirt.org/community/about/community-guidelines/ > >> List Archives: > >> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3... > >> > > > > > > -- > > Regards, > > Eyal Shenitzky > > _______________________________________________ > > Devel mailing list -- devel(a)ovirt.org > > To unsubscribe send an email to devel-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL... > > > > > -- > Martin Perina > Manager, Software Engineering > Red Hat Czech s.r.o. > _______________________________________________ > Devel mailing list -- devel(a)ovirt.org > To unsubscribe send an email to devel-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ... > > -- Martin Perina Manager, Software Engineering Red Hat Czech s.r.o.