[ovirt-devel] Re: what's up with ansible-runner-service-dev package?

Ok, after doing setup again I was able to get past ansible runner problem as it seems. Not sure what the difference is other than the fact that I install ovirt-master repo first and thus some dependencies are likely to come from there instead of standard fedora 30 repo. There seems to be one last thing, though: 2020-03-31 16:00:01,430+02 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] Host 'banana' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2020-03-31 16:00:01,474+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] EVENT_ID: VDS_SET_NONOPERATIONAL_NETWORK(519), Host banana does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt' I'm sure I've seen such error some time ago, but can't remember what it might mean... Thanks, Fedor ----- Original Message ----- From: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt; To: "Eyal Shenitzky" <eshenitz(a)redhat.com&gt; Cc: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt;, "Nir Soffer" <nsoffer(a)redhat.com&gt;, "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; Sent: Monday, March 23, 2020 10:35:49 AM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package? On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshenitz(a)redhat.com&gt; wrote: > I encounter that problem when I didn't configure my ansible runner as > needed > > > Please check that your conf file (/etc/ansible-runner-service/config.yaml) > is as follow: > > --- > > > > > > *version: 1 playbooks_root_dir: > '/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' > ssh_private_key: > '/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' > port: 50001 target_user: root* > If it still doesn't work try doing what I suggested with the breakpoint as a workaround. > > > > On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com&gt; wrote: > >> I just tried installing fedora 30 host with no pre-installed cockpit, >> just ovirt-release-master repo. Same as always: >> >> 2020-03-20 14:01:30,134+01 ERROR >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID: >> VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute >> Ansible host-deploy role: Internal server error, please check Ansible >> runner error log.. Please check logs for more details: >> /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log. >> >> No logs as usual. The error must be on the engine side somewhere... >> >> ----- Original Message ----- >> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; >> To: "Nir Soffer" <nsoffer(a)redhat.com&gt; >> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt;, "Dana Elfassy" < >> delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; >> Sent: Thursday, March 19, 2020 4:20:23 PM >> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev >> package? >> >> Thanks for the response, Nir. >> >> >You host installed without SSH server enabled? >> I've been virtualizing both engine and host vm since I joined the team, >> so enabling ssh access is the first thing I do after OS is installed. >> >> >Not sure why you need cockpit. >> >But you need: >> >sudo dnf install >> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> >> I did install ovirt-release-master rpm on the host and somehow managed to >> not copy that (facepalm). But believe me it's there. >> Regarding cockpit, I was following what's written in >> https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts... >> >> >Why not: >> >sudo yum install >> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> >> Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it >> would silently fail when you try installing from the URL :D >> >> >Did you to add centos 7.7 host? 8.1? >> Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host >> (that's the lengths I went to get this thing working!). Both fail. >> >> >Look at the full half of the glass, you have engine. >> Nice one. Though I'm afraid that part might be poisoned since host >> configuration that worked for me for a year now instantly fails no matter >> what OS is used... >> >> Fedor >> >> ----- Original Message ----- >> From: "Nir Soffer" <nsoffer(a)redhat.com&gt; >> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; >> Cc: "Martin Perina" <mperina(a)redhat.com&gt;, "Liran Rotenberg" < >> lrotenbe(a)redhat.com&gt;, "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" < >> devel(a)ovirt.org&gt; >> Sent: Thursday, March 19, 2020 2:31:39 AM >> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev >> package? >> >> On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com&gt; >> wrote: >> > >> > Wow. I did not expect that, but after clean setup the error is still >> there. >> > I can't add fedora 30 host to fedora 30 engine. >> > >> > Here is a full bash history for the host machine since OS was installed: >> > >> > sudo yum update >> >> Good >> >> > sudo systemctl enable sshd >> >> You host installed without SSH server enabled? >> >> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24 >> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 >> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 >> > sudo nmcli connection mod ens3 ipv4.method manual >> >> You can configure the network from the installer, less painful. >> >> > sudo vi /etc/hosts >> > sudo poweroff >> > sudo yum install cockpit-ovirt-dashboard >> > sudo systemctl enable cockpit.socket --now >> >> Not sure why you need cockpit. >> >> But you need: >> >> sudo dnf install >> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> >> > >> > Same for the engine machine (I was installing dependencies separetely >> because 1. yum bugs & 2. I was checking if versions are correct one by one): >> > >> > sudo yum update >> > sudo systemctl enable sshd >> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24 >> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 >> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 >> > sudo nmcli connection mod ens3 ipv4.method manual >> > sudo vi /etc/hosts >> > sudo poweroff >> > sudo yum install java-11-openjdk-devel >> > sudo yum install java-1.8.0-openjdk-headless >> > sudo yum install mailcap >> > sudo yum install unzip >> > sudo yum install openssl >> > sudo yum install bind-utils >> > sudo yum install postgresql-server >> > sudo yum install postgresql >> > sudo yum install postgresql-contrib >> > sudo yum install python2-dateutil >> > sudo yum install python3-dateutil >> > sudo yum install python2-m2crypto >> > sudo yum install python3-m2crypto >> > sudo yum install python2-psycopg2 >> > sudo yum install python3-psycopg2 >> > sudo yum install python2-jinja2 >> > sudo yum install python3-jinja2 >> > sudo yum install python2-libxml2 >> > sudo yum install python3-libxml2 >> > sudo yum install python2-daemon >> > sudo yum install python3-daemon >> >> > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> > sudo yum install ./ovirt-release-master.rpm -y >> >> Why not: >> >> sudo yum install >> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> >> Also, you want to instal this first - before you install other >> packages, so you get packages >> from ovirt dependencies. >> >> > sudo yum install otopi >> > sudo yum install python3-ovirt-setup-lib >> > sudo yum install maven >> > sudo yum install ansible >> > sudo yum install ansible-runner-service-dev >> > sudo yum install ovirt-ansible-roles >> > sudo yum install ovirt-engine-metrics >> > sudo yum install python3-ovirt-engine-sdk4 >> > sudo yum install pyflakes >> > sudo yum install python-pep8 >> > sudo yum install python3-docker >> > sudo yum install python3-isort >> > sudo yum install gcc >> > sudo yum install python2-devel >> > sudo yum install systemd-python >> > sudo yum install python-webob >> > sudo yum install redhat-rpm-config >> > sudo yum install scl-utils >> > sudo yum install ovirt-imageio-common >> >> Not needed, the ovirt-imageio-proxy will bring it. >> >> > sudo yum install make >> > sudo yum install python-requests >> > sudo yum install python-subprocess32 >> > sudo alternatives --config java >> > sudo yum install ovirt-engine-wildfly >> > sudo yum install ovirt-engine-wildfly-overlay >> > sudo vi /etc/security/limits.d/10-nofile.conf >> > sudo firewall-cmd --add-port=8080/tcp --permanent >> > sudo firewall-cmd --add-port=8443/tcp --permanent >> > sudo firewall-cmd --add-port=8787/tcp --permanent >> > sudo firewall-cmd --add-port=5432/tcp --permanent >> > sudo firewall-cmd --add-port=54323/tcp --permanent >> > sudo firewall-cmd --reload >> > sudo postgresql-setup --initdb --unit postgresql >> > sudo vi /var/lib/pgsql/data/pg_hba.conf >> > sudo vi /var/lib/pgsql/data/postgresql.conf >> > sudo systemctl enable postgresql --now >> > sudo systemctl status postgresql >> > sudo su - postgres -c "psql -d template1" >> > sudo su - postgres -c "psql -d engine" >> >> sudo -u postgres -i ? >> >> > sudo vi /etc/ansible-runner-service/config.yaml >> > sudo systemctl enable ansible-runner-service --now >> > sudo systemctl status ansible-runner-service >> > sudo yum install git >> > mkdir ~/git && cd ~/git >> > git clone git://gerrit.ovirt.org/ovirt-imageio >> > git clone git://gerrit.ovirt.org/ovirt-engine >> > vi ~/.bashrc >> > sudo reboot >> > cd ovirt-engine/ >> > make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1 >> > cd ~/git/ovirt-imageio/ >> > make >> > cd proxy/ >> > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine >> > ~/ovirt-engine/bin/engine-setup >> > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323 >> > vi ~/.bashrc >> > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf >> > sudo poweroff >> > >> > I don't know what's wrong. It does not work. >> >> Look at the full half of the glass, you have engine. >> >> Did you to add centos 7.7 host? 8.1? >> >> > ----- Original Message ----- >> > From: "Martin Perina" <mperina(a)redhat.com&gt; >> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; >> > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt;, "Dana Elfassy" < >> delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; >> > Sent: Wednesday, March 18, 2020 3:15:15 PM >> > Subject: Re: [ovirt-devel] Re: what's up with >> ansible-runner-service-dev package? >> > >> > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com&gt; >> wrote: >> > >> > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder >> why I >> > > haven't got this error sooner. >> > > Also, given the workaround, does that mean that ansible-lint is >> optional? >> > > >> > >> > Yes, same as pep8, pyflake and other build check tools >> > >> > > >> > > ----- Original Message ----- >> > > From: "Liran Rotenberg" <lrotenbe(a)redhat.com&gt; >> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com&gt; >> > > Cc: "Dana Elfassy" <delfassy(a)redhat.com&gt;, "devel" <devel(a)ovirt.org&gt; >> > > Sent: Wednesday, March 18, 2020 2:21:14 PM >> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev >> > > package? >> > > >> > > >> > > >> > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >> > >> > > wrote: >> > > >> > > >> > > Ok, thanks for the reaction :) >> > > >> > > Getting back to the main topic, can anyone (please) try to compile the >> > > engine master now? >> > > That's what I get when I try to: >> > > >> > > [602] Don't compare to empty string >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61 >> > > >> > > when: hosted_engine_vm_cluster_name_result.stdout | trim != "" >> > > >> > > [602] Don't compare to empty string >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67 >> > > >> > > when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or >> > > hosted_engine_vm_cluster_name_result.stdout is undefined >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2 >> > > >> > > Task/Handler: Install collectd package >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9 >> > > >> > > Task/Handler: Install collectd plugins on engine >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19 >> > > >> > > Task/Handler: Install collectd plugins on hosts >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28 >> > > >> > > Task/Handler: Install collectd write_syslog plugin >> > > >> > > [303] systemctl used in place of systemd module >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14 >> > > >> > > Task/Handler: Check if fluentd is running >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34 >> > > >> > > - fluentd_is_running|default(false)|bool == true >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35 >> > > >> > > changed_when: fluentd_is_running|default(false)|bool == true >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45 >> > > >> > > - fluentd_is_running|default(false)|bool == true >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51 >> > > >> > > when: fluentd_is_running|default(false)|bool == false >> > > >> > > [303] systemctl used in place of systemd module >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60 >> > > >> > > Task/Handler: Check if rsyslog is running >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80 >> > > >> > > - rsyslog_is_running|default(false)|bool == true >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81 >> > > >> > > changed_when: rsyslog_is_running|default(false)|bool == true >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91 >> > > >> > > - rsyslog_is_running|default(false)|bool == true >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97 >> > > >> > > when: rsyslog_is_running|default(false)|bool == false >> > > >> > > [303] systemctl used in place of systemd module >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100 >> > > >> > > Task/Handler: Check if collectd is running >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2 >> > > >> > > Task/Handler: Install fluentd package >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9 >> > > >> > > Task/Handler: Install fluentd engine plugins >> > > >> > > [403] Package installs should not use latest >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19 >> > > >> > > Task/Handler: Install fluentd host plugins >> > > >> > > [601] Don't compare to literal True/False >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12 >> > > >> > > when: stat_result.stat.exists == True >> > > >> > > [301] Commands should not change things if nothing needs doing >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2 >> > > >> > > Task/Handler: Get ovirt_engine_fqdn >> > > >> > > [301] Commands should not change things if nothing needs doing >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13 >> > > >> > > Task/Handler: Get ovirt_engine_db_name >> > > >> > > [301] Commands should not change things if nothing needs doing >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22 >> > > >> > > Task/Handler: Get ovirt_engine_db_user >> > > >> > > [301] Commands should not change things if nothing needs doing >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31 >> > > >> > > Task/Handler: Get ovirt_engine_history_db_name >> > > >> > > [301] Commands should not change things if nothing needs doing >> > > >> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40 >> > > >> > > Task/Handler: Get ovirt_engine_history_db_user >> > > >> > > make[1]: *** [Makefile:401: validations] Error 2 >> > > make[1]: Leaving directory '/home/apple/git/ovirt-engine' >> > > make: *** [Makefile:584: all-dev] Error 2 >> > > >> > > An extensive lecture from ansible, but what is this even about? >> > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268 >> > > >> > > >> > > >> > > ... >> > > >> > > >> > > ----- Original Message ----- >> > > From: "Nir Soffer" < nsoffer(a)redhat.com > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana Elfassy" < >> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org > >> > > Sent: Wednesday, March 18, 2020 11:45:28 AM >> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev >> > > package? >> > > >> > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com >> > >> > > wrote: >> > > > >> > > > For the time being I'm doing super careful clean installation of >> both >> > > engine and host in hopes of getting dev env working again... results >> are >> > > yet to be seen. >> > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt >> master >> > > rpm for Fedora 30. Correct name for the package is >> > > python3-ovirt-engine-sdk4. And more examples like that with random >> package >> > > renamings. >> > > > >> > > > README definitely needs an update. If you ask me, I would rather >> provide >> > > users with a single version (Fedora 30 only) of dev installation docs >> that >> > > works rather than with two versions that don't. >> > > >> > > Please do the update. >> > > >> > > Hopefully you will have more luck, my last README patch was abandoned >> > > after >> > > it was neglected by engine maintainers. >> > > https://gerrit.ovirt.org/c/106467/ >> > > >> > > > Are there any reasons to keep CentOS 7 info there that's irrelevant >> now? >> > > >> > > It should be dropped now. >> > > >> > > > I can rework the docs for FC30 eventually if no one minds. >> > > >> > > There is already a working fedora 30 instructions in the bottom of the >> > > readme. It used to >> > > work when Amit added it. >> > > >> > > > Or, if plans are to move to CentOS 8, maybe another brave soul can >> do >> > > that. >> > > > Fedor >> > > > >> > > > ----- Original Message ----- >> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com > >> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < >> devel(a)ovirt.org > >> > > > Sent: Tuesday, March 17, 2020 1:13:48 PM >> > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev >> > > package? >> > > > >> > > > >> > > > >> > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < >> fgavrilo(a)redhat.com > >> > > wrote: >> > > > >> > > > >> > > > I just tried installing on Fedora 30 host and error stays the same, >> so >> > > it's probably not as OS. Might try clean setup next, what else... >> > > > >> > > > Liran, do you see anything of interest when you journalctl -u >> > > ansible-runner-service | grep fatal ? >> > > > No, we do see a trackback on the command pointing out to >> > > python3.7/site-packages/runner_service/services/jobs.py >> > > > But, because breakpoint that only makes things slower, I think it's >> > > timing/locking issue somehow. >> > > > >> > > > >> > > > >> > > > Fedor >> > > > >> > > > ----- Original Message ----- >> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com > >> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy" < >> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org > >> > > > Sent: Tuesday, March 17, 2020 12:49:32 PM >> > > > Subject: Re: [ovirt-devel] Re: what's up with >> ansible-runner-service-dev >> > > package? >> > > > >> > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < >> fgavrilo(a)redhat.com > >> > > wrote: >> > > > >> > > > > I tried installing python 2 versions of some dependencies in >> addition >> > > to >> > > > > python 3 (as >> > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc >> > > > > is not clear about it at all. on Fedora 30 default versions of >> these >> > > > > libraries you get when not specifying python vesion in the name >> are >> > > python >> > > > > 2.) >> > > > > Now error looks slightly different :'D >> > > > > >> > > > > 2020-03-17 11:08:27,294+01 ERROR >> > > > > >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID: >> > > > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal >> > > server >> > > > > error, please check Ansible runner error log.. >> > > > > >> > > > > Everything else stays the same, host install fails almost >> immediately. >> > > > > Does someone have any notes for Fedora 30 install they can share? >> > > > > >> > > > I start seeing it too: >> > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch >> > > > python3-ansible-runner-1.3.4-2.fc30.noarch >> > > > engine: >> > > > http://pastebin.test.redhat.com/845373 >> > > > of course no ansible log.. >> > > > This is what journalctl show: >> > > > http://pastebin.test.redhat.com/845375 >> > > > >> > > > After doing some debugging in the engine, after setting a >> breakpoint in >> > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with >> > > Step-Over >> > > > until the execution (lines 139-147) it does work. Without breaking >> point >> > > > and making things slower it throws the error. >> > Here^ > > > > >> > > > > >> > > > > Thanks, >> > > > > Fedor >> > > > > >> > > > > ----- Original Message ----- >> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > To: "Martin Perina" < mperina(a)redhat.com > >> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < >> devel(a)ovirt.org >> > > > >> > > > > Sent: Monday, March 16, 2020 3:52:47 PM >> > > > > Subject: [ovirt-devel] Re: what's up with >> ansible-runner-service-dev >> > > > > package? >> > > > > >> > > > > Sorry, my bad, it was just under my nose. Systemctl is not aware >> of >> > > > > gunicorn-3, but when I check journalctl for >> ansible-runner-service I >> > > see >> > > > > the following: >> > > > > >> > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service. >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 >> +0100] >> > > [2992] >> > > > > [INFO] Starting gunicorn 19.9.0 >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 >> +0100] >> > > [2992] >> > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992) >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 >> +0100] >> > > [2992] >> > > > > [INFO] Using worker: sync >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 >> +0100] >> > > [2995] >> > > > > [INFO] Booting worker with pid: 2995 >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 >> +0100] >> > > [2997] >> > > > > [INFO] Booting worker with pid: 2997 >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local >> configuration >> > > > > options from /etc/ansible-runner-service/config.yaml >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting >> playbooks_root_dir >> > > to >> > > > > >> > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to >> root >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key >> to >> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime >> overrides >> > > from >> > > > > environment variables >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings >> > > > > overridden >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local >> configuration >> > > > > options from /etc/ansible-runner-service/config.yaml >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting >> playbooks_root_dir >> > > to >> > > > > >> > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to >> root >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key >> to >> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime >> overrides >> > > from >> > > > > environment variables >> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings >> > > > > overridden >> > > > > >> > > > > Is that any suspicious? :) >> > > > > >> > > > > ----- Original Message ----- >> > > > > From: "Martin Perina" < mperina(a)redhat.com > >> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < >> devel(a)ovirt.org >> > > > >> > > > > Sent: Monday, March 16, 2020 3:36:40 PM >> > > > > Subject: [ovirt-devel] Re: what's up with >> ansible-runner-service-dev >> > > > > package? >> > > > > >> > > > > >> > > > > >> > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < >> fgavrilo(a)redhat.com >> > > > >> > > > > wrote: >> > > > > >> > > > > >> > > > > Nothing since there is no such service (or similarly named). >> > > > > Package python3-gunicorn is installed though. >> > > > > >> > > > > After you start ansible-runner-service service, you should see >> similar >> > > > > logs in journalctl: >> > > > > >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 >> +0100] >> > > > > [1386] [INFO] Starting gunicorn 19.9.0 >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 >> +0100] >> > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386) >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 >> +0100] >> > > > > [1386] [INFO] Using worker: sync >> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 >> +0100] >> > > > > [1496] [INFO] Booting worker with pid: 1496 >> > > > > And more if you execute some action from engine (like install new >> host >> > > or >> > > > > upgrade a host) >> > > > > >> > > > > >> > > > > >> > > > > So does that mean that something was supposed to register it as a >> > > service >> > > > > but did not? >> > > > > >> > > > > Fedor >> > > > > >> > > > > ----- Original Message ----- >> > > > > From: "Martin Perina" < mperina(a)redhat.com > >> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < >> devel(a)ovirt.org >> > > > >> > > > > Sent: Monday, March 16, 2020 3:13:03 PM >> > > > > Subject: Re: [ovirt-devel] Re: what's up with >> > > ansible-runner-service-dev >> > > > > package? >> > > > > >> > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < >> fgavrilo(a)redhat.com >> > > > >> > > > > wrote: >> > > > > >> > > > > > FC30 dev env engine indeed :) I've done this before on other >> OS, so >> > > > > unless >> > > > > > there is a blindspot somewhere in my eye it should be configured >> > > fine. >> > > > > > >> > > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service >> > > > > > ● ansible-runner-service.service - Ansible Runner Service >> > > > > > Loaded: loaded >> > > (/usr/lib/systemd/system/ansible-runner-service.service; >> > > > > > enabled; vendor preset: disabled) >> > > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; >> 16min >> > > ago >> > > > > > Main PID: 909 (gunicorn-3) >> > > > > > Tasks: 9 (limit: 4915) >> > > > > > Memory: 193.4M >> > > > > > CGroup: /system.slice/ansible-runner-service.service >> > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 >> > > > > > -w 2 runner_service.wsgi:application >> > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 >> > > > > > -w 2 runner_service.wsgi:application >> > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 >> > > > > > -w 2 runner_service.wsgi:application >> > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook >> > > > > > --private-key >> > > > > > >> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i >> > > > > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> >> > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux] >> > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook >> > > > > > --private-key >> > > > > > >> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i >> > > > > > >> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> >> > > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o >> > > > > > StrictHostKeyChecking=no -o Port=22 -o >> > > > > > >> > > > > >> > > >> IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa" >> > > >> > > > > >> > > > > > -o KbdInteractiveAu> >> > > > > > >> > > > > > And the config: >> > > > > > >> > > > > > --- >> > > > > > version: 1 >> > > > > > >> > > > > > # playbooks_root_dir >> > > > > > # location of the playbooks that the service will start >> > > > > > playbooks_root_dir: >> > > > > > >> > > > > >> > > >> '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' >> > > >> > > > > >> > > > > > # port >> > > > > > # tcp port for the service to listen to >> > > > > > port: 50001 >> > > > > > # >> > > > > > # ip_address >> > > > > > # Specific IP address to bind to >> > > > > > # ip_address: '0.0.0.0' >> > > > > > target_user: root >> > > > > > #event_cache_size: 3 >> > > > > > ssh_private_key: >> > > > > > >> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' >> > > > > > >> > > > > > /home/apple/ovirt-engine is where engine is dev-installed. Not >> sure >> > > what >> > > > > > else to check now... >> > > > > > >> > > > > >> > > > > Anything strange in journalctl for gunicorn-3 service? >> > > > > >> > > > > > >> > > > > > >> > > > > > ----- Original Message ----- >> > > > > > From: "Martin Perina" < mperina(a)redhat.com > >> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < >> > > devel(a)ovirt.org > >> > > > > > Sent: Monday, March 16, 2020 2:56:59 PM >> > > > > > Subject: Re: [ovirt-devel] Re: what's up with >> > > ansible-runner-service-dev >> > > > > > package? >> > > > > > >> > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < >> fgavrilo(a)redhat.com >> > > > >> > > > > > wrote: >> > > > > > >> > > > > > > Actually, it was too early for me to celebrate. >> > > > > > > >> > > > > > > On Fedora 30, the engine compiles and runs fine, but when I >> try >> > > adding >> > > > > > the >> > > > > > > host installation fails almost immediately and I get the >> following >> > > > > errors >> > > > > > > in the engine logs: >> > > > > > > >> > > > > > > ERROR >> > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] >> > > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host >> > > installation >> > > > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', >> 'banana': >> > > > > Failed >> > > > > > to >> > > > > > > execute Ansible host-deploy role: Internal server error, >> please >> > > check >> > > > > > > Ansible runner error log.. Please check logs for more details: >> > > > > > > >> > > > > > >> > > > > >> > > >> /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log >> > > >> > > > > >> > > > > > > >> > > > > > > There is nothing else. There is no file >> > > > > > > >> > > > > > >> > > > > >> > > >> /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log >> > > >> > > > > >> > > > > > > Snapshot I'm using for the host is the same that worked just >> fine >> > > when >> > > > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is >> that an >> > > > > issue? >> > > > > > > >> > > > > > >> > > > > > As you mentioned building engine I assume you are using engine >> in >> > > dev >> > > > > env >> > > > > > on FC30, right? If so, have you manually configured >> > > > > ansible-runner-service >> > > > > > for dev env as mentioned in >> > > > > > >> > > > > > >> > > > > >> > > >> https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run... >> > > > > > ? >> > > > > > >> > > > > > >> > > > > > > Thanks, >> > > > > > > Fedor >> > > > > > > >> > > > > > > ----- Original Message ----- >> > > > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > > > To: "Martin Perina" < mperina(a)redhat.com > >> > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" < >> > > devel(a)ovirt.org >> > > > > > >> > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM >> > > > > > > Subject: [ovirt-devel] Re: what's up with >> > > ansible-runner-service-dev >> > > > > > > package? >> > > > > > > >> > > > > > > Hi, >> > > > > > > >> > > > > > > Resolved through installing engine on Fedora 30. From what I >> > > > > understand, >> > > > > > > CentOS 7 is not supported anymore. >> > > > > > > >> > > > > > > Fedor >> > > > > > > >> > > > > > > ----- Original Message ----- >> > > > > > > From: "Martin Perina" < mperina(a)redhat.com > >> > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana Elfassy" < >> > > > > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >, "Eyal >> > > Shenitzky" >> > > > > < >> > > > > > > eshenitz(a)redhat.com > >> > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM >> > > > > > > Subject: Re: [ovirt-devel] Re: what's up with >> > > > > ansible-runner-service-dev >> > > > > > > package? >> > > > > > > >> > > > > > > Hi Fedor, >> > > > > > > >> > > > > > > ansible-runner-service-dev package is available from >> > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > >> https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run... >> > > > > > > repos which is included in ovirt-master-release package, which >> > > > > > > includes all repositories necessary for oVirt development: >> > > > > > > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> > > > > > > >> > > > > > > Was your issue resolved or not? >> > > > > > > >> > > > > > > Regards, >> > > > > > > Martin >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < >> > > eshenitz(a)redhat.com >> > > > > > >> > > > > > > wrote: >> > > > > > > >> > > > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com > >> > > > > > > > >> > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < >> > > bzlotnik(a)redhat.com > >> > > > > > wrote: >> > > > > > > > >> > > > > > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3 >> > > > > > > >> >> > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov < >> > > > > fgavrilo(a)redhat.com > >> > > > > > > >> wrote: >> > > > > > > >> > >> > > > > > > >> > Hi Sandro, >> > > > > > > >> > >> > > > > > > >> > Thanks for the suggestion, but it seems to not help much. >> > > > > > > >> > >> > > > > > > >> > ansible-runner-service-dev still can't be found, I >> checked >> > > repos >> > > > > > that >> > > > > > > >> are installed from >> > > > > > > >> >> > > > > >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm >> > > > > > > >> and haven't found similarly names packages either... >> > > > > > > >> > >> > > > > > > >> > $ sudo yum install ansible-runner-service-dev >> > > > > > > >> > Loaded plugins: fastestmirror >> > > > > > > >> > Repository centos-sclo-rh-release is listed more than >> once in >> > > the >> > > > > > > >> configuration >> > > > > > > >> > Repository sac-gluster-ansible is listed more than once >> in >> > > the >> > > > > > > >> configuration >> > > > > > > >> > Determining fastest mirrors >> > > > > > > >> > ovirt-4.3-epel/x86_64/metalink >> > > > > > > >> >> > > > > > > >> | 30 kB 00:00:00 >> > > > > > > >> > ovirt-master-epel/x86_64/metalink >> > > > > > > >> >> > > > > > > >> | 30 kB 00:00:00 >> > > > > > > >> > * base: ftp.sh.cvut.cz >> > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz >> > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz >> > > > > > > >> > * extras: ftp.sh.cvut.cz >> > > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz >> > > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net >> > > > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net >> > > > > > > >> > * ovirt-master-epel: mirror.karneval.cz >> > > > > > > >> > * ovirt-master-snapshot: ftp.plusline.net >> > > > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net >> > > > > > > >> > * updates: ftp.sh.cvut.cz >> > > > > > > >> > base >> > > > > > > >> >> > > > > > > >> | 3.6 kB 00:00:00 >> > > > > > > >> > centos-opstools-release >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > centos-ovirt-common-testing >> > > > > > > >> >> > > > > > > >> | 3.4 kB 00:00:00 >> > > > > > > >> > centos-ovirt44-testing >> > > > > > > >> >> > > > > > > >> | 3.4 kB 00:00:00 >> > > > > > > >> > centos-qemu-ev-release >> > > > > > > >> >> > > > > > > >> | 3.4 kB 00:00:00 >> > > > > > > >> > centos-sclo-rh >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > centos-sclo-rh-release >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > centos-sclo-sclo >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > epel-apache-maven >> > > > > > > >> >> > > > > > > >> | 3.3 kB 00:00:00 >> > > > > > > >> > extras >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-centos-gluster6 >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-centos-opstools >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-centos-ovirt43 >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-centos-qemu-ev >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-epel >> > > > > > > >> >> > > > > > > >> | 5.3 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-snapshot >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-snapshot-static >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > ovirt-4.3-virtio-win-latest >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > ovirt-master-centos-gluster6 >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-master-centos-opstools-testing >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > ovirt-master-epel >> > > > > > > >> >> > > > > > > >> | 5.3 kB 00:00:00 >> > > > > > > >> > ovirt-master-snapshot >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > ovirt-master-snapshot-static >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > ovirt-master-virtio-win-latest >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > ovirtwebui-ovirt-web-ui-master >> > > > > > > >> >> > > > > > > >> | 3.0 kB 00:00:00 >> > > > > > > >> > sac-gluster-ansible >> > > > > > > >> >> > > > > > > >> | 3.3 kB 00:00:00 >> > > > > > > >> > updates >> > > > > > > >> >> > > > > > > >> | 2.9 kB 00:00:00 >> > > > > > > >> > (1/32): base/7/x86_64/group_gz >> > > > > > > >> >> > > > > > > >> | 165 kB 00:00:00 >> > > > > > > >> > (2/32): base/7/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 6.0 MB 00:00:00 >> > > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 4.2 MB 00:00:00 >> > > > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 9.3 kB 00:00:00 >> > > > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 344 kB 00:00:00 >> > > > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 1.1 kB 00:00:01 >> > > > > > > >> > (7/32): extras/7/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 164 kB 00:00:00 >> > > > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 429 kB 00:00:01 >> > > > > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 101 kB 00:00:01 >> > > > > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 116 kB 00:00:00 >> > > > > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 73 kB 00:00:00 >> > > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz >> > > > > > > >> >> > > > > > > >> | 90 kB 00:00:00 >> > > > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 5.0 kB 00:00:01 >> > > > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo >> > > > > > > >> >> > > > > > > >> | 1.0 MB 00:00:00 >> > > > > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 429 kB 00:00:00 >> > > > > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 211 kB 00:00:00 >> > > > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db >> > > > > > > >> >> > > > > > > >> | 3.4 kB 00:00:00 >> > > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db >> > > > > > > >> >> > > > > > > >> | 109 kB 00:00:00 >> > > > > > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 116 kB 00:00:00 >> > > > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 6.7 MB 00:00:00 >> > > > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz >> > > > > > > >> >> > > > > > > >> | 90 kB 00:00:00 >> > > > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo >> > > > > > > >> >> > > > > > > >> | 1.0 MB 00:00:00 >> > > > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db >> > > > > > > >> >> > > > > > > >> | 54 kB 00:00:00 >> > > > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db >> > > > > > > >> >> > > > > > > >> | 7.6 kB 00:00:01 >> > > > > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db >> > > > > > > >> >> > > > > > > >> | 4.6 kB 00:00:00 >> > > > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 6.7 MB 00:00:00 >> > > > > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db >> > > > > > > >> >> > > > > > > >> | 7.6 kB 00:00:00 >> > > > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 4.2 MB 00:00:03 >> > > > > > > >> > (29/32): updates/7/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 6.7 MB 00:00:00 >> > > > > > > >> > (30/32): >> > > ovirt-master-centos-opstools-testing/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 611 kB 00:00:01 >> > > > > > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 2.3 kB 00:00:00 >> > > > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db >> > > > > > > >> >> > > > > > > >> | 13 kB 00:00:00 >> > > > > > > >> > No package ansible-runner-service-dev available. >> > > > > > > >> > Error: Nothing to do >> > > > > > > >> > >> > > > > > > >> > >> > > > > > > >> > Fedor >> > > > > > > >> > >> > > > > > > >> > ----- Original Message ----- >> > > > > > > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com > >> > > > > > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >, "devel" < >> > > > > > devel(a)ovirt.org > >> > > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM >> > > > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with >> > > > > > > >> ansible-runner-service-dev package? >> > > > > > > >> > >> > > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov < >> > > > > > > >> fgavrilo(a)redhat.com > >> > > > > > > >> > ha scritto: >> > > > > > > >> > >> > > > > > > >> > > Thanks for the response, Eyal! >> > > > > > > >> > > >> > > > > > > >> > > I already had ovirt-master repo installed, but updated >> > > > > everything >> > > > > > > >> just in >> > > > > > > >> > > case. >> > > > > > > >> > > I even tried both yum and dnf (since yum on centos was >> > > giving >> > > > > me >> > > > > > > lots >> > > > > > > >> of >> > > > > > > >> > > grief before and I learned their behaviour differs, >> > > especially >> > > > > > when >> > > > > > > it >> > > > > > > >> > > comes to bugs) but none works... >> > > > > > > >> > > >> > > > > > > >> > > >No package ansible-runner-service-dev available. >> > > > > > > >> > > >No match for argument: ansible-runner-service-dev >> > > > > > > >> > > >> > > > > > > >> > > Fedor >> > > > > > > >> > > >> > > > > > > >> > > >> > > > > > > >> > Looks like you're trying to install >> ovirt-master-snapshot on >> > > el7. >> > > > > > > >> > It won't work. >> > > > > > > >> > Master is not supporting el7 anymore. >> > > > > > > >> > You can use 4.3 snapshot rpm at : >> > > > > > > >> > >> > > > > > >> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm >> > > > > > > >> if >> > > > > > > >> > you need to stay on el7. >> > > > > > > >> > >> > > > > > > >> > >> > > > > > > >> > > ----- Original Message ----- >> > > > > > > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com > >> > > > > > > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com > >> > > > > > > >> > > Cc: "devel" < devel(a)ovirt.org > >> > > > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM >> > > > > > > >> > > Subject: Re: [ovirt-devel] what's up with >> > > > > > ansible-runner-service-dev >> > > > > > > >> > > package? >> > > > > > > >> > > >> > > > > > > >> > > Hi Fedor, >> > > > > > > >> > > >> > > > > > > >> > > Please try: >> > > > > > > >> > > 1. dnf install >> > > > > > > >> > > >> > > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm >> > > > > > > >> > > 2. dnf update >> > > > > > > >> > > 3. dnf install ansible-runner-service-dev >> > > > > > > >> > > 4. flow the instruction from thread 'New dependency for >> > > > > > development >> > > > > > > >> > > environment' >> > > > > > > >> > > The >> > > > > > > >> > > >> > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov < >> > > > > fgavrilo(a)redhat.com >> > > > > > > >> > > > > > > >> wrote: >> > > > > > > >> > > >> > > > > > > >> > > > Hi everyone, >> > > > > > > >> > > > >> > > > > > > >> > > > After I screwed up my dev environment beyond repair I >> > > have to >> > > > > > set >> > > > > > > >> it up >> > > > > > > >> > > > again and I see something I haven't last time >> (CentOS 7): >> > > > > > > >> > > > >> > > > > > > >> > > > $ sudo yum install ansible-runner-service-dev >> > > > > > > >> > > > Loaded plugins: fastestmirror >> > > > > > > >> > > > Loading mirror speeds from cached hostfile >> > > > > > > >> > > > * base: mirror.hosting90.cz >> > > > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz >> > > > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz >> > > > > > > >> > > > * extras: mirror.hosting90.cz >> > > > > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz >> > > > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl >> > > > > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl >> > > > > > > >> > > > * updates: mirror.hosting90.cz >> > > > > > > >> > > > No package ansible-runner-service-dev available. >> > > > > > > >> > > > >> > > > > > > >> > > > Maybe something's missing from my notes, but where >> did it >> > > go? >> > > > > > > >> Should I >> > > > > > > >> > > add >> > > > > > > >> > > > some repo? >> > > > > > > >> > > > >> > > > > > > >> > > > Fedor >> > > > > > > >> > > > _______________________________________________ >> > > > > > > >> > > > Devel mailing list -- devel(a)ovirt.org >> > > > > > > >> > > > To unsubscribe send an email to >> devel-leave(a)ovirt.org >> > > > > > > >> > > > Privacy Statement: >> > > https://www.ovirt.org/privacy-policy.html >> > > > > > > >> > > > oVirt Code of Conduct: >> > > > > > > >> > > > >> > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > > > > >> > > > List Archives: >> > > > > > > >> > > > >> > > > > > > >> > > >> > > > > > > >> >> > > > > > > >> > > > > > >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3... >> > > > > > > >> > > > >> > > > > > > >> > > >> > > > > > > >> > > >> > > > > > > >> > > -- >> > > > > > > >> > > Regards, >> > > > > > > >> > > Eyal Shenitzky >> > > > > > > >> > > _______________________________________________ >> > > > > > > >> > > Devel mailing list -- devel(a)ovirt.org >> > > > > > > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > > > >> > > Privacy Statement: >> > > https://www.ovirt.org/privacy-policy.html >> > > > > > > >> > > oVirt Code of Conduct: >> > > > > > > >> > > >> https://www.ovirt.org/community/about/community-guidelines/ >> > > > > > > >> > > List Archives: >> > > > > > > >> > > >> > > > > > > >> >> > > > > > > >> > > > > > >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV... >> > > > > > > >> > > >> > > > > > > >> > >> > > > > > > >> > >> > > > > > > >> > -- >> > > > > > > >> > >> > > > > > > >> > Sandro Bonazzola >> > > > > > > >> > >> > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV >> > > > > > > >> > >> > > > > > > >> > Red Hat EMEA < https://www.redhat.com/ > >> > > > > > > >> > >> > > > > > > >> > sbonazzo(a)redhat.com >> > > > > > > >> > < https://www.redhat.com/ >*Red Hat respects your work >> life >> > > > > balance. >> > > > > > > >> > Therefore there is no need to answer this email out of >> your >> > > > > office >> > > > > > > >> hours. >> > > > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >* >> > > > > > > >> > _______________________________________________ >> > > > > > > >> > Devel mailing list -- devel(a)ovirt.org >> > > > > > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > > > >> > Privacy Statement: >> https://www.ovirt.org/privacy-policy.html >> > > > > > > >> > oVirt Code of Conduct: >> > > > > > > >> >> https://www.ovirt.org/community/about/community-guidelines/ >> > > > > > > >> > List Archives: >> > > > > > > >> >> > > > > > > >> > > > > > >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN... >> > > > > > > >> _______________________________________________ >> > > > > > > >> Devel mailing list -- devel(a)ovirt.org >> > > > > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > > > >> Privacy Statement: >> https://www.ovirt.org/privacy-policy.html >> > > > > > > >> oVirt Code of Conduct: >> > > > > > > >> >> https://www.ovirt.org/community/about/community-guidelines/ >> > > > > > > >> List Archives: >> > > > > > > >> >> > > > > > > >> > > > > > >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3... >> > > > > > > >> >> > > > > > > > >> > > > > > > > >> > > > > > > > -- >> > > > > > > > Regards, >> > > > > > > > Eyal Shenitzky >> > > > > > > > _______________________________________________ >> > > > > > > > Devel mailing list -- devel(a)ovirt.org >> > > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > > > > Privacy Statement: >> https://www.ovirt.org/privacy-policy.html >> > > > > > > > oVirt Code of Conduct: >> > > > > > > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > > > > > List Archives: >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL... >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > -- >> > > > > > > Martin Perina >> > > > > > > Manager, Software Engineering >> > > > > > > Red Hat Czech s.r.o. >> > > > > > > _______________________________________________ >> > > > > > > Devel mailing list -- devel(a)ovirt.org >> > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > > > > > oVirt Code of Conduct: >> > > > > > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > > > > List Archives: >> > > > > > > >> > > > > > >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ... >> > > > > > > >> > > > > > > >> > > > > > >> > > > > > -- >> > > > > > Martin Perina >> > > > > > Manager, Software Engineering >> > > > > > Red Hat Czech s.r.o. >> > > > > > >> > > > > > >> > > > > >> > > > > -- >> > > > > Martin Perina >> > > > > Manager, Software Engineering >> > > > > Red Hat Czech s.r.o. >> > > > > >> > > > > >> > > > > >> > > > > -- >> > > > > Martin Perina >> > > > > Manager, Software Engineering >> > > > > Red Hat Czech s.r.o. >> > > > > >> > > > > _______________________________________________ >> > > > > Devel mailing list -- devel(a)ovirt.org >> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > > > oVirt Code of Conduct: >> > > > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > > List Archives: >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7... >> > > > > _______________________________________________ >> > > > > Devel mailing list -- devel(a)ovirt.org >> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > > > oVirt Code of Conduct: >> > > > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > > List Archives: >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC... >> > > > > _______________________________________________ >> > > > > Devel mailing list -- devel(a)ovirt.org >> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > > > oVirt Code of Conduct: >> > > > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > > List Archives: >> > > > > >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ... >> > > > > >> > > > >> > > > >> > > > _______________________________________________ >> > > > Devel mailing list -- devel(a)ovirt.org >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > > oVirt Code of Conduct: >> > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > List Archives: >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F... >> > > > _______________________________________________ >> > > > Devel mailing list -- devel(a)ovirt.org >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > > oVirt Code of Conduct: >> > > https://www.ovirt.org/community/about/community-guidelines/ >> > > > List Archives: >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ... >> > > _______________________________________________ >> > > Devel mailing list -- devel(a)ovirt.org >> > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > oVirt Code of Conduct: >> > > https://www.ovirt.org/community/about/community-guidelines/ >> > > List Archives: >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF... >> > > >> > > >> > > _______________________________________________ >> > > Devel mailing list -- devel(a)ovirt.org >> > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > oVirt Code of Conduct: >> > > https://www.ovirt.org/community/about/community-guidelines/ >> > > List Archives: >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7... >> > > _______________________________________________ >> > > Devel mailing list -- devel(a)ovirt.org >> > > To unsubscribe send an email to devel-leave(a)ovirt.org >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > > oVirt Code of Conduct: >> > > https://www.ovirt.org/community/about/community-guidelines/ >> > > List Archives: >> > > >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC... >> > > >> > >> > >> > -- >> > Martin Perina >> > Manager, Software Engineering >> > Red Hat Czech s.r.o. >> > _______________________________________________ >> > Devel mailing list -- devel(a)ovirt.org >> > To unsubscribe send an email to devel-leave(a)ovirt.org >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> > oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> > List Archives: >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ... >> _______________________________________________ >> Devel mailing list -- devel(a)ovirt.org >> To unsubscribe send an email to devel-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5... >> _______________________________________________ >> Devel mailing list -- devel(a)ovirt.org >> To unsubscribe send an email to devel-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ... >> > > > -- > Regards, > Eyal Shenitzky > _______________________________________________ Devel mailing list -- devel(a)ovirt.org To unsubscribe send an email to devel-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/2IIVS6MVVRZ...