Here is a summary of my ovirt 3.5 to 3.6 upgrade. I am not using
hosted-engine. The engine machine is EL6.
after upgrade to ovirt 3.6, the ovirt-release35 repo remains on the manager
machine (non-hosted engine). There is also a list of rpms from the 3.5
repo.
Here is a list of 3.5 repo rpms still installed:
# yum list installed |grep ovirt-3.5
ovirt-engine-jboss-as.x86_64 7.1.1-1.el6 @ovirt-3.5
patternfly1.noarch 1.3.0-1.el6
@ovirt-3.5-patternfly1-noarch-epel
python-daemon.noarch 1.5.2-1.el6 @ovirt-3.5-epel
python-kitchen.noarch 1.1.1-1.el6 @ovirt-3.5-epel
python-lockfile.noarch 0.8-3.el6 @ovirt-3.5-epel
python-ply.noarch 3.4-4.el6 @ovirt-3.5-epel
python-websockify.noarch 0.6.0-3.el6 @ovirt-3.5-epel
xalan-j2.noarch 2.7.1-8.jbossorg_1.jpp6
@ovirt-3.5-jpackage-6.0-generic
======================================
I removed to 3.5 repo and release35 rpm, as described here. Then, I
re-installed the 3.5 rpms with the 3.6 rpms from the 3.6 repo. These rpms
did not change from 3.5 to 3.6. I just want them marked as from the 3.6
repo.
# yum remove ovirt-release35
# rm /etc/yum.repos.d/ovirt-3.5*
# yum reinstall ovirt-engine-jboss-as.x86_64 patternfly1.noarch
python-daemon.noarch python-kitchen.noarch python-lockfile.noarch
python-ply.noarch python-websockify.noarch xalan-j2.noarch
======================================
I also removed ovirt-engine-jboss-as.x86_64, since I am not using
ovirt-engine-reports.
# yum remove ovirt-engine-jboss-as.x86_64
======================================
Hope this document helps. I had loads of problems earlier, relating to
trying to use a EL6 virtualization host, when ovirt 3.6 did not support it.
Thanks, Paul
On Thu, Mar 31, 2016 at 12:29 AM, Yedidyah Bar David <didi(a)redhat.com>
wrote:
On Wed, Mar 30, 2016 at 5:31 PM, Paul Dyer
<pmdyermms(a)gmail.com> wrote:
> No, I didn't. It is also in the el6 repo for ovirt-3.6:
>
> ovirt-engine-jboss-as.x86_64 7.1.1-1.el6 @ovirt-3.6
Right. It's a requirement of ovirt-engine-reports. If you don't use
that you can safely remove it. Just try 'yum remove
ovirt-engine-jboss-as' and see that there are no dependencies.
Once finished, perhaps you can post a reply to the mailing list with a
summary, for others to be able to find it. Thanks.
>
> On Wed, Mar 30, 2016 at 9:28 AM, Yedidyah Bar David <didi(a)redhat.com>
wrote:
>>
>> On Wed, Mar 30, 2016 at 5:26 PM, Paul Dyer <pmdyermms(a)gmail.com> wrote:
>> > thanks. I did as you described.
>> >
>> > # yum remove ovirt-release35
>> > # rm /etc/yum.repos.d/ovirt-3.5*
>> > # yum reinstall ovirt-engine-jboss-as.x86_64 patternfly1.noarch
>> > python-daemon.noarch python-kitchen.noarch python-lockfile.noarch
>> > python-ply.noarch python-websockify.noarch xalan-j2.noarch
>> >
>>
>> Sorry, forgot to mention that ovirt-engine-jboss-as is no longer needed,
>> replaced with ovirt-engine-wildfly. Didn't you get a warning or
something?
>>
>> >
>> >
>> > On Wed, Mar 30, 2016 at 9:06 AM, Yedidyah Bar David
<didi(a)redhat.com>
>> > wrote:
>> >>
>> >> On Wed, Mar 30, 2016 at 5:00 PM, Paul Dyer <pmdyermms(a)gmail.com>
wrote:
>> >> > Hi,
>> >> >
>> >> > after upgrade to ovirt 3.6, the ovirt-release35 repo remains on
the
>> >> > manager
>> >> > machine (non-hosted engine). There is also a list of rpms from
the
>> >> > 3.5
>> >> > repo.
>> >> >
>> >> > Should the 3.5 repo be removed?
>> >>
>> >> In principle, yes.
>> >>
>> >> > What about the rpms from the 3.5 repo?
>> >> > Should they stay or go?
>> >>
>> >> In principle it means that the version from 3.6 is identical to the
one
>> >> you had from 3.5, so yum didn't update them.
>> >>
>> >> You can try removing the 3.5 repo, then yum reinstall each package,
to
>> >> make sure. Or just keep them.
>> >>
>> >> >
>> >> > Here is a list of 3.5 repo rpms still installed:
>> >> >
>> >> > # yum list installed |grep ovirt-3.5
>> >> > ovirt-engine-jboss-as.x86_64 7.1.1-1.el6
@ovirt-3.5
>> >> > patternfly1.noarch 1.3.0-1.el6
>> >> > @ovirt-3.5-patternfly1-noarch-epel
>> >> > python-daemon.noarch 1.5.2-1.el6
>> >> > @ovirt-3.5-epel
>> >> > python-kitchen.noarch 1.1.1-1.el6
>> >> > @ovirt-3.5-epel
>> >> > python-lockfile.noarch 0.8-3.el6
>> >> > @ovirt-3.5-epel
>> >> > python-ply.noarch 3.4-4.el6
>> >> > @ovirt-3.5-epel
>> >> > python-websockify.noarch 0.6.0-3.el6
>> >> > @ovirt-3.5-epel
>> >> > xalan-j2.noarch 2.7.1-8.jbossorg_1.jpp6
>> >> > @ovirt-3.5-jpackage-6.0-generic
>> >> >
>> >> > Thanks,
>> >> > Paul
>> >> >
>> >> > --
>> >> > Paul Dyer,
>> >> > Mercury Consulting Group, RHCE
>> >> > 504-302-8750
>> >> >
>> >> > _______________________________________________
>> >> > Devel mailing list
>> >> > Devel(a)ovirt.org
>> >> >
http://lists.ovirt.org/mailman/listinfo/devel
>> >>
>> >>
>> >>
>> >> --
>> >> Didi
>> >
>> >
>> >
>> >
>> > --
>> > Paul Dyer,
>> > Mercury Consulting Group, RHCE
>> > 504-302-8750
>>
>>
>>
>> --
>> Didi
>
>
>
>
> --
> Paul Dyer,
> Mercury Consulting Group, RHCE
> 504-302-8750
--
Didi