Re: [Engine-devel] oVirt and Quantum

Hi, Thanks for the input. Please see my inline comments. Thanks Gary On 05/03/2012 12:02 PM, Irena Berezovsky wrote: > Gary, > Thank you for a very detailed proposal. > I would like to address several issues of the proposed Quantum-oVirt > integration. > > 1. User Interface: > Network Management > I suggest to consider Logical Network Management to indicate if the > Network should be managed by Quantum or not. This may lead to > different options that user can specify via UI. It can have a Network > Type attribute. Maybe it is a place to consider custom properties > piggy-backing. This is an interesting point. I am not sure that the user should be exposed to this. My intentions when writing the integration notes were to try and keep things simple for the user. There are a number of options: - Uniform cluster support - If the UI for the cluster could provide an interface for the network properties then it would be great. If each Host in the cluster has the same characteristics then one configuration could be used for each host - for example the NIC of the integration bridge in the case of OVS plugin. - Non uniform cluster support - in this case each Host will need to be configured separately. Live migration could be challenging - this can and should be done only between hosts with the same networking characteristics.

> Host management > As long as the proposed API is used for viewing interface it's OK. It > just should not be required by user to go over each Host and define > each interface with type of Fabric he should manage. Maybe it should > be some defaults on Cluster level (will work for Homogenous cluster). Addressed above. > > 2. Back End > Network Creation: > If not every Host in the cluster has Quantum supporting interface, it > should be forbidden to apply VM migrate operation to such Host. This > probably should be indicated properly via UI and Backed should not > start the migrate process. I also think that this is addressed above. > VM Creation: > To be able to extend the basic Quantum API and add some QoS/Port > Profile attributes to the port ( like in Cisco plugin). There should > be some way in oVirt to map between port uuid (+ network)and VM id. This is addressed in the wiki. For each VM the oVirt engine should keep the relevant UUID's. "Each of the above is represented by a UUID. oVirt should save all of the UUID's with the relevant artifacts that make use of the information, namely the logical network and the virtual machines. The usage of these will be discussed below." I could describe this more explicitly.

> VM Migrate: > Even though it's just an initial suggestion, I think that VM > migration use case should be elaborated also for 'else' cases. What > happens if target Host does not support Quantum? What happens if > target host fails to run VM? Another issue is a lack of calls to > Quantum. For my understanding (but I can be wrong) in OpenStack it > will issue unplug and plug attachment calls. I agree. The goal here should be VM uptime and connectivity. If the "network" connectivity can be support but in a limited fashion then great - the migration can take place - this should nonetheless only be done when there is no other option. The live migration algorithm may have to be tweaked to support this.

> 3. VDSM > Host Management: Any suggestion /plans to define a way to write and > deploy a Vif plug Driver ( a complimentary part to the Quantum Agent)? In Quantum the spirit of things is to keep the driver as thin as possible. The Quantum agent that runs on the VDSM host should do most of the work. It would be best if VDSM could provide a "plugin" mechanism that support the following: 1. deviceNameGet - this is due to the fact that the agent knows the device name - in the case of ovs and linux bridge this is done by using the first 11 characters of the attachment UUID. Other plugins may operate in a different manner. 2. vifAdd - this will be called with the MAC address, the VM UUID and maybe additional information 3. vifDelete > Regards, > Irena > -----Original Message----- > From: engine-devel-bounces(a)ovirt.org > [mailto:engine-devel-bounces@ovirt.org] On Behalf Of Gary Kotton > Sent: Monday, April 30, 2012 2:56 PM > To: dlaor(a)redhat.com > Cc: engine-devel(a)ovirt.org; users(a)ovirt.org > Subject: Re: [Engine-devel] oVirt and Quantum > > On 04/30/2012 10:39 AM, Dor Laor wrote: >> Gary, would it be possible to compare the current major api verbs >> offered by Quantum vs the ones offered by oVirt? > Please look at > https://docs.google.com/presentation/d/1cLW88tPw-8z_ANXU2WC8gd4U2k-AC > rPnMQbgj5wDLz4/edit#slide=id.p > > This gives a high level explanation of Quantum and the flows. In > short both Quantum and oVirt enable the creation of logical networks. > By design Quantum hides the network details from the user. In oVirt > the user is able to configure the tags etc. We are in the process of > addressing this. > >> It would be nice to review the length/feature-rich of each and also >> the ease of use. > In addition to linux bridge (which is what oVirt uses today), Quantum > supports Open vSwitch, RYU and Cisco UCS - these are not supported by > oVirt at the moment. The RYU and Open vSwitch support OpenFlow >> In addition, what would be the todo items in order to get OVS >> working w/ oVirt? > Actually not much. In fact this is currently supported with the > Quantum integration. There are two parts: > 1. The VM vNic management (implemented): > i. Create a tap device that has "ethernet" as the the network device > ii. Set the device us UP ii. Attach to the integration bridge and > configure tags etc. (The Quantum agent does this part) > > 2. The host management (to be implemented): > i. oVirt Engine and VDSM need to indicate which physical network > interfaces will use the integration bridge. This can be one or more > NICS or a bond (in Quantum this is part of a configuration file). We > need to think of a nice way to show this in the GUI. > ii. The logic in oVirt engine that "decides" if a Host is "Non > Operational" needs to be updated. >> Example for Quantum: >> http://docs.openstack.org/incubation/openstack-network/developer/qua >> nt >> um-api-1.0/content/Show_port_Details.html#d6e777 >> >> Cheers, >> Dor >> >>> >>> _______________________________________________ >>> Engine-devel mailing list >>> Engine-devel(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/engine-devel > _______________________________________________ > Engine-devel mailing list > Engine-devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/engine-devel _______________________________________________ Engine-devel mailing list Engine-devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel