Re: [Engine-devel] Updating ovirt engine from 3.0 to the 3.1.0 version

Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]# -- Shu Ming<shuming(a)linux.vnet.ibm.com> IBM China Systems and Technology Laboratory _______________________________________________ Engine-devel mailing list Engine-devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel