Re: [ovirt-devel] Name resolution not working after vdsm installation
In addition here is my resolv.conf
; generated by /usr/sbin/dhclient-script
nameserver 2001:730:3ed2::53
nameserver 2001:730:3ed2:1000::53
search localdomain
On Wed, Apr 25, 2018 at 11:26 AM, Piotr Kliczewski
<piotr.kliczewski(a)gmail.com> wrote:
All,
I am using latest engine and vdsm 4.20.23-1. I installed vdsm on
centos7 vm and after the installation my vm stopped resolving names.
Here is my nic configuration before installation:
TYPE="Ethernet"
BOOTPROTO="dhcp"
DEFROUTE="yes"
PEERDNS="yes"
PEERROUTES="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_FAILURE_FATAL="no"
NAME="eth0"
UUID="0079668a-8708-46ad-8dbf-da418ae6f77e"
DEVICE="eth0"
ONBOOT="yes"
here is after:
# Generated by VDSM version 4.20.23-1.el7.centos
DEVICE=eth0
BRIDGE=ovirtmgmt
ONBOOT=yes
MTU=1500
DEFROUTE=no
NM_CONTROLLED=no
IPV6INIT=no
and the bridge:
# Generated by VDSM version 4.20.23-1.el7.centos
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
BOOTPROTO=dhcp
MTU=1500
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=yes
DHCPV6C=yes
IPV6_AUTOCONF=no
Thanks,
Piotr