Thanks, Benny! When I try to do that, I get 2020-04-01 12:14:49,346+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-6) [eaddc8ee-a015-4093-a488-64384362141b] Unexpected return value: Status [code=-32603, message=Internal JSON-RPC error: {'reason': "type object 'LinuxBridge' has no attribute 'STP'"}] 2020-04-01 12:14:49,346+02 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-6) [eaddc8ee-a015-4093-a488-64384362141b] Failed in 'HostSetupNetworksVDS' method in the logs. I wonder if something is wrong with my FC30 host setup then... Fedor ----- Original Message ----- From: "Benny Zlotnik" <bzlotnik@redhat.com> To: "Fedor Gavrilov" <fgavrilo@redhat.com> Cc: "Liran Rotenberg" <lrotenbe@redhat.com>, "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org> Sent: Tuesday, March 31, 2020 5:40:06 PM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package? usually means you don't have the ovirtmgmt bridge on the host, going to host -> network interfaces -> setup host networks should set it up for you On Tue, Mar 31, 2020 at 6:12 PM Fedor Gavrilov <fgavrilo@redhat.com> wrote:
Ok, after doing setup again I was able to get past ansible runner problem as it seems. Not sure what the difference is other than the fact that I install ovirt-master repo first and thus some dependencies are likely to come from there instead of standard fedora 30 repo. There seems to be one last thing, though:
2020-03-31 16:00:01,430+02 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] Host 'banana' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2020-03-31 16:00:01,474+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] EVENT_ID: VDS_SET_NONOPERATIONAL_NETWORK(519), Host banana does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
I'm sure I've seen such error some time ago, but can't remember what it might mean...
Thanks, Fedor
----- Original Message ----- From: "Liran Rotenberg" <lrotenbe@redhat.com> To: "Eyal Shenitzky" <eshenitz@redhat.com> Cc: "Fedor Gavrilov" <fgavrilo@redhat.com>, "Nir Soffer" <nsoffer@redhat.com>, "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org> Sent: Monday, March 23, 2020 10:35:49 AM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshenitz@redhat.com> wrote:
I encounter that problem when I didn't configure my ansible runner as needed
Please check that your conf file (/etc/ansible-runner-service/config.yaml) is as follow:
---
*version: 1 playbooks_root_dir: '/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' ssh_private_key: '/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' port: 50001 target_user: root*
If it still doesn't work try doing what I suggested with the breakpoint as a workaround.
On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo@redhat.com> wrote:
I just tried installing fedora 30 host with no pre-installed cockpit, just ovirt-release-master repo. Same as always:
2020-03-20 14:01:30,134+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID: VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute Ansible host-deploy role: Internal server error, please check Ansible runner error log.. Please check logs for more details: /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
No logs as usual. The error must be on the engine side somewhere...
----- Original Message ----- From: "Fedor Gavrilov" <fgavrilo@redhat.com> To: "Nir Soffer" <nsoffer@redhat.com> Cc: "Liran Rotenberg" <lrotenbe@redhat.com>, "Dana Elfassy" < delfassy@redhat.com>, "devel" <devel@ovirt.org> Sent: Thursday, March 19, 2020 4:20:23 PM Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Thanks for the response, Nir.
You host installed without SSH server enabled? I've been virtualizing both engine and host vm since I joined the team, so enabling ssh access is the first thing I do after OS is installed.
Not sure why you need cockpit. But you need: sudo dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
I did install ovirt-release-master rpm on the host and somehow managed to not copy that (facepalm). But believe me it's there. Regarding cockpit, I was following what's written in https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts.ht...
Why not: sudo yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it would silently fail when you try installing from the URL :D
Did you to add centos 7.7 host? 8.1? Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host (that's the lengths I went to get this thing working!). Both fail.
Look at the full half of the glass, you have engine. Nice one. Though I'm afraid that part might be poisoned since host configuration that worked for me for a year now instantly fails no matter what OS is used...
Fedor
----- Original Message ----- From: "Nir Soffer" <nsoffer@redhat.com> To: "Fedor Gavrilov" <fgavrilo@redhat.com> Cc: "Martin Perina" <mperina@redhat.com>, "Liran Rotenberg" < lrotenbe@redhat.com>, "Dana Elfassy" <delfassy@redhat.com>, "devel" < devel@ovirt.org> Sent: Thursday, March 19, 2020 2:31:39 AM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo@redhat.com> wrote:
Wow. I did not expect that, but after clean setup the error is still
there.
I can't add fedora 30 host to fedora 30 engine.
Here is a full bash history for the host machine since OS was installed:
sudo yum update
Good
sudo systemctl enable sshd
You host installed without SSH server enabled?
sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24 sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 sudo nmcli connection mod ens3 ipv4.method manual
You can configure the network from the installer, less painful.
sudo vi /etc/hosts sudo poweroff sudo yum install cockpit-ovirt-dashboard sudo systemctl enable cockpit.socket --now
Not sure why you need cockpit.
But you need:
sudo dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Same for the engine machine (I was installing dependencies separetely
because 1. yum bugs & 2. I was checking if versions are correct one by one):
sudo yum update sudo systemctl enable sshd sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24 sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1 sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1 sudo nmcli connection mod ens3 ipv4.method manual sudo vi /etc/hosts sudo poweroff sudo yum install java-11-openjdk-devel sudo yum install java-1.8.0-openjdk-headless sudo yum install mailcap sudo yum install unzip sudo yum install openssl sudo yum install bind-utils sudo yum install postgresql-server sudo yum install postgresql sudo yum install postgresql-contrib sudo yum install python2-dateutil sudo yum install python3-dateutil sudo yum install python2-m2crypto sudo yum install python3-m2crypto sudo yum install python2-psycopg2 sudo yum install python3-psycopg2 sudo yum install python2-jinja2 sudo yum install python3-jinja2 sudo yum install python2-libxml2 sudo yum install python3-libxml2 sudo yum install python2-daemon sudo yum install python3-daemon
wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm sudo yum install ./ovirt-release-master.rpm -y
Why not:
sudo yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Also, you want to instal this first - before you install other packages, so you get packages from ovirt dependencies.
sudo yum install otopi sudo yum install python3-ovirt-setup-lib sudo yum install maven sudo yum install ansible sudo yum install ansible-runner-service-dev sudo yum install ovirt-ansible-roles sudo yum install ovirt-engine-metrics sudo yum install python3-ovirt-engine-sdk4 sudo yum install pyflakes sudo yum install python-pep8 sudo yum install python3-docker sudo yum install python3-isort sudo yum install gcc sudo yum install python2-devel sudo yum install systemd-python sudo yum install python-webob sudo yum install redhat-rpm-config sudo yum install scl-utils sudo yum install ovirt-imageio-common
Not needed, the ovirt-imageio-proxy will bring it.
sudo yum install make sudo yum install python-requests sudo yum install python-subprocess32 sudo alternatives --config java sudo yum install ovirt-engine-wildfly sudo yum install ovirt-engine-wildfly-overlay sudo vi /etc/security/limits.d/10-nofile.conf sudo firewall-cmd --add-port=8080/tcp --permanent sudo firewall-cmd --add-port=8443/tcp --permanent sudo firewall-cmd --add-port=8787/tcp --permanent sudo firewall-cmd --add-port=5432/tcp --permanent sudo firewall-cmd --add-port=54323/tcp --permanent sudo firewall-cmd --reload sudo postgresql-setup --initdb --unit postgresql sudo vi /var/lib/pgsql/data/pg_hba.conf sudo vi /var/lib/pgsql/data/postgresql.conf sudo systemctl enable postgresql --now sudo systemctl status postgresql sudo su - postgres -c "psql -d template1" sudo su - postgres -c "psql -d engine"
sudo -u postgres -i ?
sudo vi /etc/ansible-runner-service/config.yaml sudo systemctl enable ansible-runner-service --now sudo systemctl status ansible-runner-service sudo yum install git mkdir ~/git && cd ~/git git clone git://gerrit.ovirt.org/ovirt-imageio git clone git://gerrit.ovirt.org/ovirt-engine vi ~/.bashrc sudo reboot cd ovirt-engine/ make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1 cd ~/git/ovirt-imageio/ make cd proxy/ make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine ~/ovirt-engine/bin/engine-setup ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323 vi ~/.bashrc vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf sudo poweroff
I don't know what's wrong. It does not work.
Look at the full half of the glass, you have engine.
Did you to add centos 7.7 host? 8.1?
----- Original Message ----- From: "Martin Perina" <mperina@redhat.com> To: "Fedor Gavrilov" <fgavrilo@redhat.com> Cc: "Liran Rotenberg" <lrotenbe@redhat.com>, "Dana Elfassy" < delfassy@redhat.com>, "devel" <devel@ovirt.org> Sent: Wednesday, March 18, 2020 3:15:15 PM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo@redhat.com> wrote:
Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why I haven't got this error sooner. Also, given the workaround, does that mean that ansible-lint is optional?
Yes, same as pep8, pyflake and other build check tools
----- Original Message ----- From: "Liran Rotenberg" <lrotenbe@redhat.com> To: "Fedor Gavrilov" <fgavrilo@redhat.com> Cc: "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org> Sent: Wednesday, March 18, 2020 2:21:14 PM Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo@redhat.com
wrote:
Ok, thanks for the reaction :)
Getting back to the main topic, can anyone (please) try to compile the engine master now? That's what I get when I try to:
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or hosted_engine_vm_cluster_name_result.stdout is undefined
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
Task/Handler: Install collectd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
Task/Handler: Install collectd plugins on engine
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
Task/Handler: Install collectd plugins on hosts
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
Task/Handler: Install collectd write_syslog plugin
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
Task/Handler: Check if fluentd is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
changed_when: fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
when: fluentd_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
Task/Handler: Check if rsyslog is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
changed_when: rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
when: rsyslog_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
Task/Handler: Check if collectd is running
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
Task/Handler: Install fluentd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
Task/Handler: Install fluentd engine plugins
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
Task/Handler: Install fluentd host plugins
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
when: stat_result.stat.exists == True
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
Task/Handler: Get ovirt_engine_fqdn
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
Task/Handler: Get ovirt_engine_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
Task/Handler: Get ovirt_engine_db_user
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
Task/Handler: Get ovirt_engine_history_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
Task/Handler: Get ovirt_engine_history_db_user
make[1]: *** [Makefile:401: validations] Error 2 make[1]: Leaving directory '/home/apple/git/ovirt-engine' make: *** [Makefile:584: all-dev] Error 2
An extensive lecture from ansible, but what is this even about? https://bugzilla.redhat.com/show_bug.cgi?id=1804268
...
----- Original Message ----- From: "Nir Soffer" < nsoffer@redhat.com > To: "Fedor Gavrilov" < fgavrilo@redhat.com > Cc: "Liran Rotenberg" < lrotenbe@redhat.com >, "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org > Sent: Wednesday, March 18, 2020 11:45:28 AM Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo@redhat.com
wrote:
For the time being I'm doing super careful clean installation of
What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master rpm for Fedora 30. Correct name for the package is
both engine and host in hopes of getting dev env working again... results are yet to be seen. python3-ovirt-engine-sdk4. And more examples like that with random package renamings.
README definitely needs an update. If you ask me, I would rather
provide users with a single version (Fedora 30 only) of dev installation docs that works rather than with two versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned after it was neglected by engine maintainers. https://gerrit.ovirt.org/c/106467/
Are there any reasons to keep CentOS 7 info there that's irrelevant now?
It should be dropped now.
I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the readme. It used to work when Amit added it.
Or, if plans are to move to CentOS 8, maybe another brave soul can do that. Fedor
----- Original Message ----- From: "Liran Rotenberg" < lrotenbe@redhat.com > To: "Fedor Gavrilov" < fgavrilo@redhat.com > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org > Sent: Tuesday, March 17, 2020 1:13:48 PM Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo@redhat.com > wrote:
I just tried installing on Fedora 30 host and error stays the same, so it's probably not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u ansible-runner-service | grep fatal ? No, we do see a trackback on the command pointing out to python3.7/site-packages/runner_service/services/jobs.py But, because breakpoint that only makes things slower, I think it's timing/locking issue somehow.
Fedor
----- Original Message ----- From: "Liran Rotenberg" < lrotenbe@redhat.com > To: "Fedor Gavrilov" < fgavrilo@redhat.com > Cc: "Martin Perina" < mperina@redhat.com >, "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org > Sent: Tuesday, March 17, 2020 12:49:32 PM Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo@redhat.com > wrote:
> I tried installing python 2 versions of some dependencies in addition to > python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc > is not clear about it at all. on Fedora 30 default versions of these > libraries you get when not specifying python vesion in the name are python > 2.) > Now error looks slightly different :'D > > 2020-03-17 11:08:27,294+01 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID: > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server > error, please check Ansible runner error log.. > > Everything else stays the same, host install fails almost immediately. > Does someone have any notes for Fedora 30 install they can share? > I start seeing it too: ansible-runner-service-dev-1.0.1-1.fc30.noarch python3-ansible-runner-1.3.4-2.fc30.noarch engine: http://pastebin.test.redhat.com/845373 of course no ansible log.. This is what journalctl show: http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over until the execution (lines 139-147) it does work. Without breaking point and making things slower it throws the error.
Here^
> > Thanks, > Fedor > > ----- Original Message ----- > From: "Fedor Gavrilov" < fgavrilo@redhat.com > > To: "Martin Perina" < mperina@redhat.com > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" <
> Sent: Monday, March 16, 2020 3:52:47 PM > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> package? > > Sorry, my bad, it was just under my nose. Systemctl is not aware of > gunicorn-3, but when I check journalctl for ansible-runner-service I see > the following: > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service. > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] > [INFO] Starting gunicorn 19.9.0 > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] > [INFO] Listening at: http://127.0.0.1:50001 (2992) > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] > [INFO] Using worker: sync > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995] > [INFO] Booting worker with pid: 2995 > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997] > [INFO] Booting worker with pid: 2997 > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration > options from /etc/ansible-runner-service/config.yaml > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
devel@ovirt.org playbooks_root_dir
to
>
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from > environment variables > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings > overridden > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration > options from /etc/ansible-runner-service/config.yaml > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project playbooks_root_dir
to
>
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001 > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from > environment variables > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings > overridden > > Is that any suspicious? :) > > ----- Original Message ----- > From: "Martin Perina" < mperina@redhat.com > > To: "Fedor Gavrilov" < fgavrilo@redhat.com > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org
> Sent: Monday, March 16, 2020 3:36:40 PM > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo@redhat.com
> wrote: > > > Nothing since there is no such service (or similarly named). > Package python3-gunicorn is installed though. > > After you start ansible-runner-service service, you should see similar > logs in journalctl: > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] > [1386] [INFO] Starting gunicorn 19.9.0 > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386) > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] > [1386] [INFO] Using worker: sync > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] > [1496] [INFO] Booting worker with pid: 1496 > And more if you execute some action from engine (like install new host or > upgrade a host) > > > > So does that mean that something was supposed to register it as a service > but did not? > > Fedor > > ----- Original Message ----- > From: "Martin Perina" < mperina@redhat.com > > To: "Fedor Gavrilov" < fgavrilo@redhat.com > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org
> Sent: Monday, March 16, 2020 3:13:03 PM > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev > package? > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo@redhat.com
> wrote: > > > FC30 dev env engine indeed :) I've done this before on other OS, so > unless > > there is a blindspot somewhere in my eye it should be configured fine. > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service > > ● ansible-runner-service.service - Ansible Runner Service > > Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service; > > enabled; vendor preset: disabled) > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago > > Main PID: 909 (gunicorn-3) > > Tasks: 9 (limit: 4915) > > Memory: 193.4M > > CGroup: /system.slice/ansible-runner-service.service > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > > -w 2 runner_service.wsgi:application > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > > -w 2 runner_service.wsgi:application > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 > > -w 2 runner_service.wsgi:application > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook > > --private-key > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux] > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook > > --private-key > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi> > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o > > StrictHostKeyChecking=no -o Port=22 -o > > >
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> > > -o KbdInteractiveAu> > > > > And the config: > > > > --- > > version: 1 > > > > # playbooks_root_dir > > # location of the playbooks that the service will start > > playbooks_root_dir: > > >
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> > > # port > > # tcp port for the service to listen to > > port: 50001 > > # > > # ip_address > > # Specific IP address to bind to > > # ip_address: '0.0.0.0' > > target_user: root > > #event_cache_size: 3 > > ssh_private_key: > >
> > > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure what > > else to check now... > > > > Anything strange in journalctl for gunicorn-3 service? > > > > > > > ----- Original Message ----- > > From: "Martin Perina" < mperina@redhat.com > > > To: "Fedor Gavrilov" < fgavrilo@redhat.com > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org > > > Sent: Monday, March 16, 2020 2:56:59 PM > > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev > > package? > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo@redhat.com
> > wrote: > > > > > Actually, it was too early for me to celebrate. > > > > > > On Fedora 30, the engine compiles and runs fine, but when I
adding
> > the > > > host installation fails almost immediately and I get the following > errors > > > in the engine logs: > > > > > > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana': > Failed > > to > > > execute Ansible host-deploy role: Internal server error,
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' try please
check
> > > Ansible runner error log.. Please check logs for more details: > > > > > >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > > > > > > There is nothing else. There is no file > > > > > >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > > > Snapshot I'm using for the host is the same that worked just
when
> > > engine was running on CentOS 7 and is CentOS 7 itself. Is
fine that an
> issue? > > > > > > > As you mentioned building engine I assume you are using engine in dev > env > > on FC30, right? If so, have you manually configured > ansible-runner-service > > for dev env as mentioned in > > > > >
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-runner...
> > ? > > > > > > > Thanks, > > > Fedor > > > > > > ----- Original Message ----- > > > From: "Fedor Gavrilov" < fgavrilo@redhat.com > > > > To: "Martin Perina" < mperina@redhat.com > > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org > > > > > Sent: Monday, March 16, 2020 12:37:44 PM > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev > > > package? > > > > > > Hi, > > > > > > Resolved through installing engine on Fedora 30. From what I > understand, > > > CentOS 7 is not supported anymore. > > > > > > Fedor > > > > > > ----- Original Message ----- > > > From: "Martin Perina" < mperina@redhat.com > > > > To: "Fedor Gavrilov" < fgavrilo@redhat.com > > > > Cc: "Benny Zlotnik" < bzlotnik@redhat.com >, "Dana Elfassy" < > > > delfassy@redhat.com >, "devel" < devel@ovirt.org >, "Eyal Shenitzky" > < > > > eshenitz@redhat.com > > > > Sent: Monday, March 16, 2020 8:11:35 AM > > > Subject: Re: [ovirt-devel] Re: what's up with > ansible-runner-service-dev > > > package? > > > > > > Hi Fedor, > > > > > > ansible-runner-service-dev package is available from > > > > > > > > >
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-runner...
> > > repos which is included in ovirt-master-release package, which > > > includes all repositories necessary for oVirt development: > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > > > > > Was your issue resolved or not? > > > > > > Regards, > > > Martin > > > > > > > > > > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz@redhat.com > > > > > wrote: > > > > > > > Adding also +Dana Elfassy < delfassy@redhat.com > > > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik@redhat.com > > > wrote: > > > > > > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3 > > > >> > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov < > fgavrilo@redhat.com > > > > >> wrote: > > > >> > > > > >> > Hi Sandro, > > > >> > > > > >> > Thanks for the suggestion, but it seems to not help much. > > > >> > > > > >> > ansible-runner-service-dev still can't be found, I checked repos > > that > > > >> are installed from > > > >> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > > > >> and haven't found similarly names packages either... > > > >> > > > > >> > $ sudo yum install ansible-runner-service-dev > > > >> > Loaded plugins: fastestmirror > > > >> > Repository centos-sclo-rh-release is listed more than once in the > > > >> configuration > > > >> > Repository sac-gluster-ansible is listed more than once in the > > > >> configuration > > > >> > Determining fastest mirrors > > > >> > ovirt-4.3-epel/x86_64/metalink > > > >> > > > >> | 30 kB 00:00:00 > > > >> > ovirt-master-epel/x86_64/metalink > > > >> > > > >> | 30 kB 00:00:00 > > > >> > * base: ftp.sh.cvut.cz > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz > > > >> > * extras: ftp.sh.cvut.cz > > > >> > * ovirt-4.3-epel: mirror.karneval.cz > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net > > > >> > * ovirt-master-epel: mirror.karneval.cz > > > >> > * ovirt-master-snapshot: ftp.plusline.net > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net > > > >> > * updates: ftp.sh.cvut.cz > > > >> > base > > > >> > > > >> | 3.6 kB 00:00:00 > > > >> > centos-opstools-release > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > centos-ovirt-common-testing > > > >> > > > >> | 3.4 kB 00:00:00 > > > >> > centos-ovirt44-testing > > > >> > > > >> | 3.4 kB 00:00:00 > > > >> > centos-qemu-ev-release > > > >> > > > >> | 3.4 kB 00:00:00 > > > >> > centos-sclo-rh > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > centos-sclo-rh-release > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > centos-sclo-sclo > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > epel-apache-maven > > > >> > > > >> | 3.3 kB 00:00:00 > > > >> > extras > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-4.3-centos-gluster6 > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-4.3-centos-opstools > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-4.3-centos-ovirt43 > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-4.3-centos-qemu-ev > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-4.3-epel > > > >> > > > >> | 5.3 kB 00:00:00 > > > >> > ovirt-4.3-snapshot > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > ovirt-4.3-snapshot-static > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > ovirt-4.3-virtio-win-latest > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > ovirt-master-centos-gluster6 > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-master-centos-opstools-testing > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > ovirt-master-epel > > > >> > > > >> | 5.3 kB 00:00:00 > > > >> > ovirt-master-snapshot > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > ovirt-master-snapshot-static > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > ovirt-master-virtio-win-latest > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > ovirtwebui-ovirt-web-ui-master > > > >> > > > >> | 3.0 kB 00:00:00 > > > >> > sac-gluster-ansible > > > >> > > > >> | 3.3 kB 00:00:00 > > > >> > updates > > > >> > > > >> | 2.9 kB 00:00:00 > > > >> > (1/32): base/7/x86_64/group_gz > > > >> > > > >> | 165 kB 00:00:00 > > > >> > (2/32): base/7/x86_64/primary_db > > > >> > > > >> | 6.0 MB 00:00:00 > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db > > > >> > > > >> | 4.2 MB 00:00:00 > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db > > > >> > > > >> | 9.3 kB 00:00:00 > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db > > > >> > > > >> | 344 kB 00:00:00 > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db > > > >> > > > >> | 1.1 kB 00:00:01 > > > >> > (7/32): extras/7/x86_64/primary_db > > > >> > > > >> | 164 kB 00:00:00 > > > >> > (8/32): centos-opstools-release/x86_64/primary_db > > > >> > > > >> | 429 kB 00:00:01 > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db > > > >> > > > >> | 101 kB 00:00:01 > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db > > > >> > > > >> | 116 kB 00:00:00 > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db > > > >> > > > >> | 73 kB 00:00:00 > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz > > > >> > > > >> | 90 kB 00:00:00 > > > >> > (13/32): epel-apache-maven/x86_64/primary_db > > > >> > > > >> | 5.0 kB 00:00:01 > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo > > > >> > > > >> | 1.0 MB 00:00:00 > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db > > > >> > > > >> | 429 kB 00:00:00 > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db > > > >> > > > >> | 211 kB 00:00:00 > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db > > > >> > > > >> | 3.4 kB 00:00:00 > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db > > > >> > > > >> | 109 kB 00:00:00 > > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db > > > >> > > > >> | 116 kB 00:00:00 > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db > > > >> > > > >> | 6.7 MB 00:00:00 > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz > > > >> > > > >> | 90 kB 00:00:00 > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo > > > >> > > > >> | 1.0 MB 00:00:00 > > > >> > (23/32): ovirt-master-snapshot/7/primary_db > > > >> > > > >> | 54 kB 00:00:00 > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db > > > >> > > > >> | 7.6 kB 00:00:01 > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db > > > >> > > > >> | 4.6 kB 00:00:00 > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db > > > >> > > > >> | 6.7 MB 00:00:00 > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db > > > >> > > > >> | 7.6 kB 00:00:00 > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db > > > >> > > > >> | 4.2 MB 00:00:03 > > > >> > (29/32): updates/7/x86_64/primary_db > > > >> > > > >> | 6.7 MB 00:00:00 > > > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db > > > >> > > > >> | 611 kB 00:00:01 > > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db > > > >> > > > >> | 2.3 kB 00:00:00 > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db > > > >> > > > >> | 13 kB 00:00:00 > > > >> > No package ansible-runner-service-dev available. > > > >> > Error: Nothing to do > > > >> > > > > >> > > > > >> > Fedor > > > >> > > > > >> > ----- Original Message ----- > > > >> > From: "Sandro Bonazzola" < sbonazzo@redhat.com > > > > >> > To: "Fedor Gavrilov" < fgavrilo@redhat.com > > > > >> > Cc: "Eyal Shenitzky" < eshenitz@redhat.com >, "devel" < > > devel@ovirt.org > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM > > > >> > Subject: Re: [ovirt-devel] Re: what's up with > > > >> ansible-runner-service-dev package? > > > >> > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov < > > > >> fgavrilo@redhat.com > > > > >> > ha scritto: > > > >> > > > > >> > > Thanks for the response, Eyal! > > > >> > > > > > >> > > I already had ovirt-master repo installed, but updated > everything > > > >> just in > > > >> > > case. > > > >> > > I even tried both yum and dnf (since yum on centos was giving > me > > > lots > > > >> of > > > >> > > grief before and I learned their behaviour differs, especially > > when > > > it > > > >> > > comes to bugs) but none works... > > > >> > > > > > >> > > >No package ansible-runner-service-dev available. > > > >> > > >No match for argument: ansible-runner-service-dev > > > >> > > > > > >> > > Fedor > > > >> > > > > > >> > > > > > >> > Looks like you're trying to install ovirt-master-snapshot on el7. > > > >> > It won't work. > > > >> > Master is not supporting el7 anymore. > > > >> > You can use 4.3 snapshot rpm at : > > > >> > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm > > > >> if > > > >> > you need to stay on el7. > > > >> > > > > >> > > > > >> > > ----- Original Message ----- > > > >> > > From: "Eyal Shenitzky" < eshenitz@redhat.com > > > > >> > > To: "Fedor Gavrilov" < fgavrilo@redhat.com > > > > >> > > Cc: "devel" < devel@ovirt.org > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM > > > >> > > Subject: Re: [ovirt-devel] what's up with > > ansible-runner-service-dev > > > >> > > package? > > > >> > > > > > >> > > Hi Fedor, > > > >> > > > > > >> > > Please try: > > > >> > > 1. dnf install > > > >> > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm > > > >> > > 2. dnf update > > > >> > > 3. dnf install ansible-runner-service-dev > > > >> > > 4. flow the instruction from thread 'New dependency for > > development > > > >> > > environment' > > > >> > > The > > > >> > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov < > fgavrilo@redhat.com > > > > > > >> wrote: > > > >> > > > > > >> > > > Hi everyone, > > > >> > > > > > > >> > > > After I screwed up my dev environment beyond repair I have to > > set > > > >> it up > > > >> > > > again and I see something I haven't last time (CentOS 7): > > > >> > > > > > > >> > > > $ sudo yum install ansible-runner-service-dev > > > >> > > > Loaded plugins: fastestmirror > > > >> > > > Loading mirror speeds from cached hostfile > > > >> > > > * base: mirror.hosting90.cz > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz > > > >> > > > * extras: mirror.hosting90.cz > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl > > > >> > > > * updates: mirror.hosting90.cz > > > >> > > > No package ansible-runner-service-dev available. > > > >> > > > > > > >> > > > Maybe something's missing from my notes, but where did it go? > > > >> Should I > > > >> > > add > > > >> > > > some repo? > > > >> > > > > > > >> > > > Fedor > > > >> > > > _______________________________________________ > > > >> > > > Devel mailing list -- devel@ovirt.org > > > >> > > > To unsubscribe send an email to devel-leave@ovirt.org > > > >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > >> > > > oVirt Code of Conduct: > > > >> > > > https://www.ovirt.org/community/about/community-guidelines/ > > > >> > > > List Archives: > > > >> > > > > > > >> > > > > > >> > > > > > >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3IRO...
> > > >> > > > > > > >> > > > > > >> > > > > > >> > > -- > > > >> > > Regards, > > > >> > > Eyal Shenitzky > > > >> > > _______________________________________________ > > > >> > > Devel mailing list -- devel@ovirt.org > > > >> > > To unsubscribe send an email to devel-leave@ovirt.org > > > >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > >> > > oVirt Code of Conduct: > > > >> > > https://www.ovirt.org/community/about/community-guidelines/ > > > >> > > List Archives: > > > >> > > > > > >> > > > > > >
> > > >> > > > > > >> > > > > >> > > > > >> > -- > > > >> > > > > >> > Sandro Bonazzola > > > >> > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > > >> > > > > >> > Red Hat EMEA < https://www.redhat.com/ > > > > >> > > > > >> > sbonazzo@redhat.com > > > >> > < https://www.redhat.com/ >*Red Hat respects your work
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSVFXE... life
> balance. > > > >> > Therefore there is no need to answer this email out of your > office > > > >> hours. > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >* > > > >> > _______________________________________________ > > > >> > Devel mailing list -- devel@ovirt.org > > > >> > To unsubscribe send an email to devel-leave@ovirt.org > > > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > >> > oVirt Code of Conduct: > > > >> https://www.ovirt.org/community/about/community-guidelines/ > > > >> > List Archives: > > > >> > > > > > >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47ANIF2...
> > > >> _______________________________________________ > > > >> Devel mailing list -- devel@ovirt.org > > > >> To unsubscribe send an email to devel-leave@ovirt.org > > > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > >> oVirt Code of Conduct: > > > >> https://www.ovirt.org/community/about/community-guidelines/ > > > >> List Archives: > > > >> > > > > > >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3IQR...
> > > >> > > > > > > > > > > > > -- > > > > Regards, > > > > Eyal Shenitzky > > > > _______________________________________________ > > > > Devel mailing list -- devel@ovirt.org > > > > To unsubscribe send an email to devel-leave@ovirt.org > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > oVirt Code of Conduct: > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > > > > > > > > >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7ALS27...
> > > > > > > > > > > > > -- > > > Martin Perina > > > Manager, Software Engineering > > > Red Hat Czech s.r.o. > > > _______________________________________________ > > > Devel mailing list -- devel@ovirt.org > > > To unsubscribe send an email to devel-leave@ovirt.org > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > > > >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ7TR...
> > > > > > > > > > -- > > Martin Perina > > Manager, Software Engineering > > Red Hat Czech s.r.o. > > > > > > -- > Martin Perina > Manager, Software Engineering > Red Hat Czech s.r.o. > > > > -- > Martin Perina > Manager, Software Engineering > Red Hat Czech s.r.o. > > _______________________________________________ > Devel mailing list -- devel@ovirt.org > To unsubscribe send an email to devel-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN74IG...
> _______________________________________________ > Devel mailing list -- devel@ovirt.org > To unsubscribe send an email to devel-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC46W...
> _______________________________________________ > Devel mailing list -- devel@ovirt.org > To unsubscribe send an email to devel-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZHOR...
>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6FT4V...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJEN7...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF2HX...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7EUJ...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVCQIS...
-- Martin Perina Manager, Software Engineering Red Hat Czech s.r.o. _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ3II...
Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5F4F... _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJCJH...
-- Regards, Eyal Shenitzky
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/2IIVS6MVVRZJAV...