oVirt 4.4.0 Alpha release is now available for testing
oVirt 4.4.0 Alpha release is now available for testing The oVirt Project is excited to announce the availability of the alpha release of oVirt 4.4.0 for testing, as of December 13th, 2019 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is an Alpha release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production, and it is not feature complete. In particular, please note that upgrades from 4.3 and future upgrades from this alpha to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Alpha require content that will be available in CentOS Linux 8.1 which is currently being built from Red Hat Enterprise Linux 8.1. If you want to have a better experience you can test oVirt 4.4.0 Alpha on Red Hat Enterprise Linux 8.1. Known Issues - After installation open the Default cluster and hit “Save”, for any other new Cluster using CPU autodetection the dialog needs to be explicitly saved after the detection happens, after first host is added. (bug https://bugzilla.redhat.com/1770697) - Migrate, Cluster Upgrade, Export VM buttons cannot be clicked. Fixed in ovirt-engine-ui-extensions-1.0.11 Installation instructions For the engine: either use appliance or: - Install CentOS Linux 7.7 minimal from http://centos.mirror.garr.it/centos/7.7.1908/isos/x86_64/CentOS-7-x86_64-Min... - yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - yum update (reboot if needed) - yum install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8.0 from http://centos.mirror.garr.it/centos/8.0.1905/isos/x86_64/CentOS-8-x86_64-190... ; select minimal installation - yum config-manager --set-enabled PowerTools - yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - yum update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Alpha? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8.0) * CentOS Linux (or similar) 7.7 or later (but < 8.0) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.0 or later * CentOS Linux (or similar) 8.0 or later * oVirt Node 4.4 based on CentOS Linux 8.0 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*
On Fri, Dec 13, 2019 at 11:19 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
oVirt 4.4.0 Alpha release is now available for testing
The oVirt Project is excited to announce the availability of the alpha release of oVirt 4.4.0 for testing, as of December 13th, 2019
This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3.
What a nice pre-Christmas present... thanks! This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 7.7 or later (but < 8.0)
* CentOS Linux (or similar) 7.7 or later (but < 8.0)
Probably too early to ask, but does this mean that realistically when final 4.4 will be out it will support also 7.7 and not only 8.x based hosts? In case of spare time to test, where is the correct place then to report, apart standard bugzilla? ovirt users or devel list? Thanks again, Gianluca
Il giorno ven 13 dic 2019 alle ore 11:30 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Fri, Dec 13, 2019 at 11:19 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
oVirt 4.4.0 Alpha release is now available for testing
The oVirt Project is excited to announce the availability of the alpha release of oVirt 4.4.0 for testing, as of December 13th, 2019
This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3.
What a nice pre-Christmas present... thanks!
Couldn't let Santa Lucia come without a gift! (For non italian users: https://en.wikipedia.org/wiki/Saint_Lucy%27s_Day )
This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 7.7 or later (but < 8.0)
* CentOS Linux (or similar) 7.7 or later (but < 8.0)
Probably too early to ask, but does this mean that realistically when final 4.4 will be out it will support also 7.7 and not only 8.x based hosts?
4.4 will support cluster level 4.2 so you can still use 7.7 based oVirt 4.2/4.3 hosts until you finish to migrate everything to 4.4. Recomendation will be to move to 4.4 / el8 based hosts ASAP once 4.4 will go GA.
In case of spare time to test, where is the correct place then to report, apart standard bugzilla? ovirt users or devel list?
bugzilla is always best place to report bugs. sos reports attached will be useful to get more data when debugging reported issues.
Thanks again, Gianluca
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
participants (2)
-
Gianluca Cecchi -
Sandro Bonazzola