12:29 p.m.
We have ioprocess in EPEL and brew builds for el6\7, and builds for f19\f20
in bodhi.
There is no such thing as "pushing to stable". In order to be deemed stable
a package has to sit there for 30 days without negative karma or get enough (3)
positive karma.
We have notified on the mailing list that ioprocess is in need for
karma. In any case, you should start getting used to fetching ioprocess
builds from updates-testing when working on the master branch as
we are not going to wait for a month before adding capabilities to VDSM
after adding a feature to ioprocess (or any other external dependency).
There is no reason for VDSM's master branch to only use RPMs from stable
repos. Quite the contrary, the reason that updates-testing exists is so
that consumers of the RPM can test the impending release and make sure it
works before it is delivered to the general public.
Further more, after using a build from updates-testing with VDSM and seeing
that it works it would be most appreciated if you supply give karma
to accelerate the process of getting a released to the stable repo.
For more information:
https://fedoraproject.org/wiki/QA:Updates_Testing
Links to builds:
https://brewweb.devel.redhat.com/packageinfo?packageID=47301
https://admin.fedoraproject.org/updates/search/ioprocess?_csrf_token=adc8...
On Thu, Jun 26, 2014 at 01:38:45PM -0400, Nir Soffer wrote:
> ----- Original Message -----
> > From: "Dan Kenigsberg" <danken(a)redhat.com>
> > To: "Nir Soffer" <nsoffer(a)redhat.com>
> > Cc: "ybronhei" <ybronhei(a)redhat.com>, "Oved Ourfali"
<ovedo(a)redhat.com>,
> > "Eli Mesika" <emesika(a)redhat.com>, "Yeela
> > Kaplan" <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > Sent: Thursday, June 26, 2014 8:11:59 PM
> > Subject: Re: Failed to run "make rpm" on VDSM latest master
> >
> > On Thu, Jun 26, 2014 at 11:59:13AM -0400, Nir Soffer wrote:
> > > ----- Original Message -----
> > > > From: "ybronhei" <ybronhei(a)redhat.com>
> > > > To: "Oved Ourfali" <ovedo(a)redhat.com>, "Eli
Mesika"
> > > > <emesika(a)redhat.com>
> > > > Cc: "Nir Soffer" <nsoffer(a)redhat.com>, "Yeela
Kaplan"
> > > > <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > > > Sent: Thursday, June 26, 2014 2:22:16 PM
> > > > Subject: Re: Failed to run "make rpm" on VDSM latest
master
> > > >
> > > > On 06/26/2014 07:53 AM, Oved Ourfali wrote:
> > > > > cc-ing also Yeela and Saggi.
> > > > >
> > > > > Oved
> > > > >
> > > > > ----- Original Message -----
> > > > >> From: "Eli Mesika" <emesika(a)redhat.com>
> > > > >> To: "Yaniv Bronheim" <ybronhei(a)redhat.com>,
"Nir Soffer"
> > > > >> <nsoffer(a)redhat.com>
> > > > >> Cc: "Oved Ourfalli" <oourfali(a)redhat.com>
> > > > >> Sent: Wednesday, June 25, 2014 11:34:24 PM
> > > > >> Subject: Failed to run "make rpm" on VDSM latest
master
> > > > >>
> > > > >>
> > > > >> Hi, I had applied Nir patch and tried to create rpms , and
this is
> > > > >> what I
> > > > >> have got :
> > > > >>
> > > > >> error: Failed build dependencies:
> > > > >> python-ioprocess >= 0.5-1 is needed by
> > > > >> vdsm-4.15.0-185.git5b501bf.el6.x86_64
> > > > >>
> > > > >>
> > > > >> Then I had switched to the master branch and got the same
> > > > >>
> > > > >> How can I install this new dependency ?
> > > > >>
> > > > >>
> > > > >> Thanks
> > > > >> Eli Mesika
> > > > >>
> > > > >>
> > > > solved?
> > > > just yum install python-ioprocess
> > > > i will update vdsm_Developers wiki page
> > >
> > > # yum install python-ioprocess
> > > No package python-ioprocess available.
> > >
> > > Looks like broken (again) master to me
> >
> > # yum --enablerepo=epel-testing install python-ioprocess
> >
> > Fixed this for me. Saggi/Yeela, could you push it to stable, and produce
> > a
> > f19 build? That would help plenty of us.
>
> This patch should fix the situation for everyone, allowing easy testing.
> http://gerrit.ovirt.org/29304
>
> Nir
2:48 p.m.
New subject: Failed to run "make rpm" on VDSM latest master
----- Original Message -----
From: "Saggi Mizrahi" <smizrahi(a)redhat.com>
To: "Nir Soffer" <nsoffer(a)redhat.com>, devel(a)ovirt.org
Cc: "Yeela Kaplan" <ykaplan(a)redhat.com>, bazulay(a)redhat.com, "Dan
Kenigsberg" <danken(a)redhat.com>
Sent: Sunday, June 29, 2014 12:29:35 PM
Subject: Re: Failed to run "make rpm" on VDSM latest master
We have ioprocess in EPEL and brew builds for el6\7, and builds for f19\f20
in bodhi.
Which repository provides this packages on RHEL 6.5?
We have notified on the mailing list that ioprocess is in need for
karma. In any case, you should start getting used to fetching ioprocess
builds from updates-testing when working on the master branch as
we are not going to wait for a month before adding capabilities to VDSM
after adding a feature to ioprocess (or any other external dependency).
I checked and it is available now from the updates-testing repo, but it
was not available last week when the requirements was merged.
> On Thu, Jun 26, 2014 at 01:38:45PM -0400, Nir Soffer wrote:
> > ----- Original Message -----
> > > From: "Dan Kenigsberg" <danken(a)redhat.com>
> > > To: "Nir Soffer" <nsoffer(a)redhat.com>
> > > Cc: "ybronhei" <ybronhei(a)redhat.com>, "Oved
Ourfali"
> > > <ovedo(a)redhat.com>,
> > > "Eli Mesika" <emesika(a)redhat.com>, "Yeela
> > > Kaplan" <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > > Sent: Thursday, June 26, 2014 8:11:59 PM
> > > Subject: Re: Failed to run "make rpm" on VDSM latest master
> > >
> > > On Thu, Jun 26, 2014 at 11:59:13AM -0400, Nir Soffer wrote:
> > > > ----- Original Message -----
> > > > > From: "ybronhei" <ybronhei(a)redhat.com>
> > > > > To: "Oved Ourfali" <ovedo(a)redhat.com>, "Eli
Mesika"
> > > > > <emesika(a)redhat.com>
> > > > > Cc: "Nir Soffer" <nsoffer(a)redhat.com>,
"Yeela Kaplan"
> > > > > <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > > > > Sent: Thursday, June 26, 2014 2:22:16 PM
> > > > > Subject: Re: Failed to run "make rpm" on VDSM latest
master
> > > > >
> > > > > On 06/26/2014 07:53 AM, Oved Ourfali wrote:
> > > > > > cc-ing also Yeela and Saggi.
> > > > > >
> > > > > > Oved
> > > > > >
> > > > > > ----- Original Message -----
> > > > > >> From: "Eli Mesika"
<emesika(a)redhat.com>
> > > > > >> To: "Yaniv Bronheim"
<ybronhei(a)redhat.com>, "Nir Soffer"
> > > > > >> <nsoffer(a)redhat.com>
> > > > > >> Cc: "Oved Ourfalli"
<oourfali(a)redhat.com>
> > > > > >> Sent: Wednesday, June 25, 2014 11:34:24 PM
> > > > > >> Subject: Failed to run "make rpm" on VDSM
latest master
> > > > > >>
> > > > > >>
> > > > > >> Hi, I had applied Nir patch and tried to create rpms ,
and this
> > > > > >> is
> > > > > >> what I
> > > > > >> have got :
> > > > > >>
> > > > > >> error: Failed build dependencies:
> > > > > >> python-ioprocess >= 0.5-1 is needed by
> > > > > >> vdsm-4.15.0-185.git5b501bf.el6.x86_64
> > > > > >>
> > > > > >>
> > > > > >> Then I had switched to the master branch and got the
same
> > > > > >>
> > > > > >> How can I install this new dependency ?
> > > > > >>
> > > > > >>
> > > > > >> Thanks
> > > > > >> Eli Mesika
> > > > > >>
> > > > > >>
> > > > > solved?
> > > > > just yum install python-ioprocess
> > > > > i will update vdsm_Developers wiki page
> > > >
> > > > # yum install python-ioprocess
> > > > No package python-ioprocess available.
> > > >
> > > > Looks like broken (again) master to me
> > >
> > > # yum --enablerepo=epel-testing install python-ioprocess
> > >
> > > Fixed this for me. Saggi/Yeela, could you push it to stable, and
> > > produce
> > > a
> > > f19 build? That would help plenty of us.
> >
> > This patch should fix the situation for everyone, allowing easy testing.
> > http://gerrit.ovirt.org/29304
> >
> > Nir
>
3:05 p.m.
New subject: Failed to run "make rpm" on VDSM latest master
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Saggi Mizrahi" <smizrahi(a)redhat.com>
Cc: devel(a)ovirt.org, "Yeela Kaplan" <ykaplan(a)redhat.com>,
bazulay(a)redhat.com, "Dan Kenigsberg" <danken(a)redhat.com>
Sent: Sunday, June 29, 2014 2:48:49 PM
Subject: Re: Failed to run "make rpm" on VDSM latest master
----- Original Message -----
> From: "Saggi Mizrahi" <smizrahi(a)redhat.com>
> To: "Nir Soffer" <nsoffer(a)redhat.com>, devel(a)ovirt.org
> Cc: "Yeela Kaplan" <ykaplan(a)redhat.com>, bazulay(a)redhat.com,
"Dan
> Kenigsberg" <danken(a)redhat.com>
> Sent: Sunday, June 29, 2014 12:29:35 PM
> Subject: Re: Failed to run "make rpm" on VDSM latest master
>
> We have ioprocess in EPEL and brew builds for el6\7, and builds for f19\f20
> in bodhi.
Which repository provides this packages on RHEL 6.5?
I linked the brew\bodhi pages
which have that information.
> We have notified on the mailing list that ioprocess is in need for
> karma. In any case, you should start getting used to fetching ioprocess
> builds from updates-testing when working on the master branch as
> we are not going to wait for a month before adding capabilities to VDSM
> after adding a feature to ioprocess (or any other external dependency).
I checked and it is available now from the updates-testing repo, but it
was not available last week when the requirements was merged.
It sometimes takes
time for the fedora mirrors to sync. Nothing I
can do about it. In general, you can always search bodhi\brew if
yum can't find it. You know there will always be a build since we can't
pass CI if we can't supply a koji\EPEL build to the CI team to install
on the slaves.
> > On Thu, Jun 26, 2014 at 01:38:45PM -0400, Nir Soffer wrote:
> > > ----- Original Message -----
> > > > From: "Dan Kenigsberg" <danken(a)redhat.com>
> > > > To: "Nir Soffer" <nsoffer(a)redhat.com>
> > > > Cc: "ybronhei" <ybronhei(a)redhat.com>, "Oved
Ourfali"
> > > > <ovedo(a)redhat.com>,
> > > > "Eli Mesika" <emesika(a)redhat.com>, "Yeela
> > > > Kaplan" <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > > > Sent: Thursday, June 26, 2014 8:11:59 PM
> > > > Subject: Re: Failed to run "make rpm" on VDSM latest
master
> > > >
> > > > On Thu, Jun 26, 2014 at 11:59:13AM -0400, Nir Soffer wrote:
> > > > > ----- Original Message -----
> > > > > > From: "ybronhei" <ybronhei(a)redhat.com>
> > > > > > To: "Oved Ourfali" <ovedo(a)redhat.com>,
"Eli Mesika"
> > > > > > <emesika(a)redhat.com>
> > > > > > Cc: "Nir Soffer" <nsoffer(a)redhat.com>,
"Yeela Kaplan"
> > > > > > <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > > > > > Sent: Thursday, June 26, 2014 2:22:16 PM
> > > > > > Subject: Re: Failed to run "make rpm" on VDSM
latest master
> > > > > >
> > > > > > On 06/26/2014 07:53 AM, Oved Ourfali wrote:
> > > > > > > cc-ing also Yeela and Saggi.
> > > > > > >
> > > > > > > Oved
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > >> From: "Eli Mesika"
<emesika(a)redhat.com>
> > > > > > >> To: "Yaniv Bronheim"
<ybronhei(a)redhat.com>, "Nir Soffer"
> > > > > > >> <nsoffer(a)redhat.com>
> > > > > > >> Cc: "Oved Ourfalli"
<oourfali(a)redhat.com>
> > > > > > >> Sent: Wednesday, June 25, 2014 11:34:24 PM
> > > > > > >> Subject: Failed to run "make rpm" on
VDSM latest master
> > > > > > >>
> > > > > > >>
> > > > > > >> Hi, I had applied Nir patch and tried to create
rpms , and
> > > > > > >> this
> > > > > > >> is
> > > > > > >> what I
> > > > > > >> have got :
> > > > > > >>
> > > > > > >> error: Failed build dependencies:
> > > > > > >> python-ioprocess >= 0.5-1 is needed
by
> > > > > > >> vdsm-4.15.0-185.git5b501bf.el6.x86_64
> > > > > > >>
> > > > > > >>
> > > > > > >> Then I had switched to the master branch and got
the same
> > > > > > >>
> > > > > > >> How can I install this new dependency ?
> > > > > > >>
> > > > > > >>
> > > > > > >> Thanks
> > > > > > >> Eli Mesika
> > > > > > >>
> > > > > > >>
> > > > > > solved?
> > > > > > just yum install python-ioprocess
> > > > > > i will update vdsm_Developers wiki page
> > > > >
> > > > > # yum install python-ioprocess
> > > > > No package python-ioprocess available.
> > > > >
> > > > > Looks like broken (again) master to me
> > > >
> > > > # yum --enablerepo=epel-testing install python-ioprocess
> > > >
> > > > Fixed this for me. Saggi/Yeela, could you push it to stable, and
> > > > produce
> > > > a
> > > > f19 build? That would help plenty of us.
> > >
> > > This patch should fix the situation for everyone, allowing easy
> > > testing.
> > > http://gerrit.ovirt.org/29304
> > >
> > > Nir
> >
>
5:33 p.m.
New subject: Failed to run "make rpm" on VDSM latest master
----- Original Message -----
From: "Saggi Mizrahi" <smizrahi(a)redhat.com>
To: "Nir Soffer" <nsoffer(a)redhat.com>
Cc: devel(a)ovirt.org, "Yeela Kaplan" <ykaplan(a)redhat.com>,
bazulay(a)redhat.com, "Dan Kenigsberg" <danken(a)redhat.com>
Sent: Sunday, June 29, 2014 3:05:16 PM
Subject: Re: Failed to run "make rpm" on VDSM latest master
----- Original Message -----
> From: "Nir Soffer" <nsoffer(a)redhat.com>
> To: "Saggi Mizrahi" <smizrahi(a)redhat.com>
> Cc: devel(a)ovirt.org, "Yeela Kaplan" <ykaplan(a)redhat.com>,
> bazulay(a)redhat.com, "Dan Kenigsberg" <danken(a)redhat.com>
> Sent: Sunday, June 29, 2014 2:48:49 PM
> Subject: Re: Failed to run "make rpm" on VDSM latest master
>
> ----- Original Message -----
> > From: "Saggi Mizrahi" <smizrahi(a)redhat.com>
> > To: "Nir Soffer" <nsoffer(a)redhat.com>, devel(a)ovirt.org
> > Cc: "Yeela Kaplan" <ykaplan(a)redhat.com>, bazulay(a)redhat.com,
"Dan
> > Kenigsberg" <danken(a)redhat.com>
> > Sent: Sunday, June 29, 2014 12:29:35 PM
> > Subject: Re: Failed to run "make rpm" on VDSM latest master
> >
> > We have ioprocess in EPEL and brew builds for el6\7, and builds for
> > f19\f20
> > in bodhi.
>
> Which repository provides this packages on RHEL 6.5?
I linked the brew\bodhi pages which have that information.
>
> > We have notified on the mailing list that ioprocess is in need for
> > karma. In any case, you should start getting used to fetching ioprocess
> > builds from updates-testing when working on the master branch as
> > we are not going to wait for a month before adding capabilities to VDSM
> > after adding a feature to ioprocess (or any other external dependency).
>
> I checked and it is available now from the updates-testing repo, but it
> was not available last week when the requirements was merged.
It sometimes takes time for the fedora mirrors to sync. Nothing I
can do about it. In general, you can always search bodhi\brew if
yum can't find it. You know there will always be a build since we can't
pass CI if we can't supply a koji\EPEL build to the CI team to install
on the slaves.
I talked with Eyal and found the secret ovirt-master-snapshot-static
repository, which keep this package.
http://www.ovirt.org/Vdsm_Developers#Basic_installation
It can be enabled in /etc/yum.repos.d/ovirt-nightly.repo
or when installing vdsm, as explained in the vdsm developer page:
http://www.ovirt.org/Vdsm_Developers#Basic_installation
Thanks,
Nir
>
> > > On Thu, Jun 26, 2014 at 01:38:45PM -0400, Nir Soffer wrote:
> > > > ----- Original Message -----
> > > > > From: "Dan Kenigsberg" <danken(a)redhat.com>
> > > > > To: "Nir Soffer" <nsoffer(a)redhat.com>
> > > > > Cc: "ybronhei" <ybronhei(a)redhat.com>, "Oved
Ourfali"
> > > > > <ovedo(a)redhat.com>,
> > > > > "Eli Mesika" <emesika(a)redhat.com>, "Yeela
> > > > > Kaplan" <ykaplan(a)redhat.com>, "Saggi
Mizrahi" <smizrahi(a)redhat.com>
> > > > > Sent: Thursday, June 26, 2014 8:11:59 PM
> > > > > Subject: Re: Failed to run "make rpm" on VDSM latest
master
> > > > >
> > > > > On Thu, Jun 26, 2014 at 11:59:13AM -0400, Nir Soffer wrote:
> > > > > > ----- Original Message -----
> > > > > > > From: "ybronhei"
<ybronhei(a)redhat.com>
> > > > > > > To: "Oved Ourfali" <ovedo(a)redhat.com>,
"Eli Mesika"
> > > > > > > <emesika(a)redhat.com>
> > > > > > > Cc: "Nir Soffer" <nsoffer(a)redhat.com>,
"Yeela Kaplan"
> > > > > > > <ykaplan(a)redhat.com>, "Saggi Mizrahi"
<smizrahi(a)redhat.com>
> > > > > > > Sent: Thursday, June 26, 2014 2:22:16 PM
> > > > > > > Subject: Re: Failed to run "make rpm" on
VDSM latest master
> > > > > > >
> > > > > > > On 06/26/2014 07:53 AM, Oved Ourfali wrote:
> > > > > > > > cc-ing also Yeela and Saggi.
> > > > > > > >
> > > > > > > > Oved
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > >> From: "Eli Mesika"
<emesika(a)redhat.com>
> > > > > > > >> To: "Yaniv Bronheim"
<ybronhei(a)redhat.com>, "Nir Soffer"
> > > > > > > >> <nsoffer(a)redhat.com>
> > > > > > > >> Cc: "Oved Ourfalli"
<oourfali(a)redhat.com>
> > > > > > > >> Sent: Wednesday, June 25, 2014 11:34:24 PM
> > > > > > > >> Subject: Failed to run "make rpm"
on VDSM latest master
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Hi, I had applied Nir patch and tried to
create rpms , and
> > > > > > > >> this
> > > > > > > >> is
> > > > > > > >> what I
> > > > > > > >> have got :
> > > > > > > >>
> > > > > > > >> error: Failed build dependencies:
> > > > > > > >> python-ioprocess >= 0.5-1 is
needed by
> > > > > > > >>
vdsm-4.15.0-185.git5b501bf.el6.x86_64
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Then I had switched to the master branch and
got the same
> > > > > > > >>
> > > > > > > >> How can I install this new dependency ?
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Thanks
> > > > > > > >> Eli Mesika
> > > > > > > >>
> > > > > > > >>
> > > > > > > solved?
> > > > > > > just yum install python-ioprocess
> > > > > > > i will update vdsm_Developers wiki page
> > > > > >
> > > > > > # yum install python-ioprocess
> > > > > > No package python-ioprocess available.
> > > > > >
> > > > > > Looks like broken (again) master to me
> > > > >
> > > > > # yum --enablerepo=epel-testing install python-ioprocess
> > > > >
> > > > > Fixed this for me. Saggi/Yeela, could you push it to stable,
and
> > > > > produce
> > > > > a
> > > > > f19 build? That would help plenty of us.
> > > >
> > > > This patch should fix the situation for everyone, allowing easy
> > > > testing.
> > > > http://gerrit.ovirt.org/29304
> > > >
> > > > Nir
> > >
> >
>
1:56 p.m.
New subject: Failed to run "make rpm" on VDSM latest master
On Sun, Jun 29, 2014 at 05:29:35AM -0400, Saggi Mizrahi wrote:
We have ioprocess in EPEL and brew builds for el6\7, and builds for
f19\f20
in bodhi.
There is no such thing as "pushing to stable". In order to be deemed stable
a package has to sit there for 30 days without negative karma or get enough (3)
positive karma.
If I recall correctly,
https://admin.fedoraproject.org/updates/search/ioprocess has a column
titled "request" which the maintainer may click if he wants to push it
to stable. A F20 ioprocess-0.5.0 build seems to be completely missing
from there, btw.
3798
days inactive
3799
days old
4 comments
3 participants
participants (3)
-
Dan Kenigsberg -
Nir Soffer -
Saggi Mizrahi