בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul ‏<ykaul@redhat.com>:

On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < mihajlov@linux.vnet.ibm.com> wrote:

...

I just tried to update the ovirt packages on my FC27 host, but failed due to https://gerrit.ovirt.org/#/c/87628/

vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has only 3.7.0-4 the moment.

It's generic Fedora 27, but since I run on s390, cross-posting to s390 list.

I guess there's good reason to require libvirt 3.10. Is there any chance that we can get libvirt updated for Fedora 27?

Perhaps use the virt-preview[1] repo for now?

Yes, we require virt-preview for Fedora. This is why that patch did not fail in the CI. It should be documented, probably in ovirt.org. Nir Y.

[1] https://fedoraproject.org/wiki/Virtualization_Preview_Repository

...

-- Regards, Viktor Mihajlovski

_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel

_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel

On Tue, 27 Feb 2018 10:13:15 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

On 27.02.2018 01:26, Nir Soffer wrote:

...

בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul ‏<ykaul@redhat.com>:

...

On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < mihajlov@linux.vnet.ibm.com> wrote:

...

I just tried to update the ovirt packages on my FC27 host, but failed due to https://gerrit.ovirt.org/#/c/87628/

vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has only 3.7.0-4 the moment.

It's generic Fedora 27, but since I run on s390, cross-posting to s390 list.

I guess there's good reason to require libvirt 3.10. Is there any chance that we can get libvirt updated for Fedora 27?

Perhaps use the virt-preview[1] repo for now?

Yes, we require virt-preview for Fedora. This is why that patch did not fail in the CI. Makes sense, unfortunately virt-preview doesn't contains s390 binaries at this point in time. Would be great if at least libvirt and qemu could be built for s390.

looks like it's even x86_64 only, /me wonders what it would require to offer other arches (aarch64, ppc64le, s390x) as well Dan

[...] -- Regards, Viktor Mihajlovski _______________________________________________ s390x mailing list -- s390x@lists.fedoraproject.org To unsubscribe send an email to s390x-leave@lists.fedoraproject.org

בתאריך יום ג׳, 27 בפבר׳ 2018, 13:25, מאת Dan Horák ‏<dan@danny.cz>:

...

On Tue, 27 Feb 2018 10:13:15 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

...

On 27.02.2018 01:26, Nir Soffer wrote:

...

בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul ‏<ykaul@redhat.com>:

...

On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < mihajlov@linux.vnet.ibm.com> wrote:

...

I just tried to update the ovirt packages on my FC27 host, but failed due to https://gerrit.ovirt.org/#/c/87628/

vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has only 3.7.0-4 the moment.

It's generic Fedora 27, but since I run on s390, cross-posting to s390 list.

I guess there's good reason to require libvirt 3.10. Is there any chance that we can get libvirt updated for Fedora 27?

Perhaps use the virt-preview[1] repo for now?

Yes, we require virt-preview for Fedora. This is why that patch did not fail in the CI. Makes sense, unfortunately virt-preview doesn't contains s390 binaries at this point in time. Would be great if at least libvirt and qemu could be built for s390.

looks like it's even x86_64 only, /me wonders what it would require to offer other arches (aarch64, ppc64le, s390x) as well

If we need to support platform not supported in virt-preview, we need to chage the requirement so it is used only on x86_64.

Victor, would you like to send a patch? I believe there was a good reason to bump the libvirt requirement in the vdsm package (some bugfix). Ideally, virt-preview should be build for s390 as well. If I'm not mistaking, the script https://github.com/crobinso/build-fedora-virt-preview is used to build

On 27.02.2018 13:35, Nir Soffer wrote: the RPMs and populate the repository. Dan, Cole: what would it take to run this on the fedora-390 build machine?

...

Dan

...

[...] -- Regards, Viktor Mihajlovski _______________________________________________ s390x mailing list -- s390x@lists.fedoraproject.org To unsubscribe send an email to s390x-leave@lists.fedoraproject.org

-- Regards, Viktor Mihajlovski

On 02/27/2018 08:03 AM, Dan Horák wrote:

On Tue, 27 Feb 2018 13:54:06 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

...

...

בתאריך יום ג׳, 27 בפבר׳ 2018, 13:25, מאת Dan Horák ‏<dan@danny.cz>:

...

On Tue, 27 Feb 2018 10:13:15 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

...

...

בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul ‏<ykaul@redhat.com>:

> On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < > mihajlov@linux.vnet.ibm.com> wrote: > >> I just tried to update the ovirt packages on my FC27 host, but >> failed due to https://gerrit.ovirt.org/#/c/87628/ >> >> vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has only >> 3.7.0-4 the moment. >> >> It's generic Fedora 27, but since I run on s390, cross-posting >> to s390 list. >> >> I guess there's good reason to require libvirt 3.10. Is there >> any chance that we can get libvirt updated for Fedora 27? >> > > Perhaps use the virt-preview[1] repo for now? >

Yes, we require virt-preview for Fedora. This is why that patch did not fail in the CI. Makes sense, unfortunately virt-preview doesn't contains s390 binaries at this point in time. Would be great if at least

On 27.02.2018 01:26, Nir Soffer wrote: libvirt and qemu could be built for s390.

looks like it's even x86_64 only, /me wonders what it would require to offer other arches (aarch64, ppc64le, s390x) as well

If we need to support platform not supported in virt-preview, we need to chage the requirement so it is used only on x86_64.

Victor, would you like to send a patch? I believe there was a good reason to bump the libvirt requirement in

On 27.02.2018 13:35, Nir Soffer wrote: the vdsm package (some bugfix). Ideally, virt-preview should be build for s390 as well. If I'm not mistaking, the script https://github.com/crobinso/build-fedora-virt-preview is used to build the RPMs and populate the repository.

Dan, Cole: what would it take to run this on the fedora-390 build machine?

after a brief look the script needs to be made multi-arch-aware (it hard-codes x86_64 in some places), when it calls mock, and then it needs some HW (we have ppc64le and s390x even now, aarch64 might take a while), overall it looks doable to me. Cole, what do you think?

I'm open to the idea in theory but in practice right now the script uses mock locally so it's basically tied to the one build machine I use which is x86. I have arm32 and aarch64 hardware locally but TBH I have very little interest in running a build farm and dealing with all the issues of connecting to remote machines, pulling down build output, etc. In fact I've been meaning to move virt-preview to copr for a long while which is going to tie it even deeper to x86, this would make virt-preview easier to enable and let me scrap much of my custom code for building/uploading repo contents. We could re-implement it using koji scratch builds which have multiple arch support nowadays but I did that in the past for x86 and I recall feeling it was quite brittle, though I don't remember the details, maybe it was just my implementation. Thanks, Cole

On 02/28/2018 03:39 AM, Dan Horák wrote:

On Tue, 27 Feb 2018 16:26:28 -0500 Cole Robinson <crobinso@redhat.com> wrote:

...

On 02/27/2018 08:03 AM, Dan Horák wrote:

...

On Tue, 27 Feb 2018 13:54:06 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

...

On 27.02.2018 13:35, Nir Soffer wrote:

...

בתאריך יום ג׳, 27 בפבר׳ 2018, 13:25, מאת Dan Horák ‏<dan@danny.cz>:

...

On Tue, 27 Feb 2018 10:13:15 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

> On 27.02.2018 01:26, Nir Soffer wrote: >> בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul >> ‏<ykaul@redhat.com>: >> >>> On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < >>> mihajlov@linux.vnet.ibm.com> wrote: >>> >>>> I just tried to update the ovirt packages on my FC27 host, >>>> but failed due to https://gerrit.ovirt.org/#/c/87628/ >>>> >>>> vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has >>>> only 3.7.0-4 the moment. >>>> >>>> It's generic Fedora 27, but since I run on s390, >>>> cross-posting to s390 list. >>>> >>>> I guess there's good reason to require libvirt 3.10. Is there >>>> any chance that we can get libvirt updated for Fedora 27? >>>> >>> >>> Perhaps use the virt-preview[1] repo for now? >>> >> >> Yes, we require virt-preview for Fedora. This is why that patch >> did not fail in the CI. > Makes sense, unfortunately virt-preview doesn't contains s390 > binaries at this point in time. Would be great if at least > libvirt and qemu could be built for s390.

looks like it's even x86_64 only, /me wonders what it would require to offer other arches (aarch64, ppc64le, s390x) as well

If we need to support platform not supported in virt-preview, we need to chage the requirement so it is used only on x86_64.

Victor, would you like to send a patch? I believe there was a good reason to bump the libvirt requirement in the vdsm package (some bugfix). Ideally, virt-preview should be build for s390 as well. If I'm not mistaking, the script https://github.com/crobinso/build-fedora-virt-preview is used to build the RPMs and populate the repository.

Dan, Cole: what would it take to run this on the fedora-390 build machine?

after a brief look the script needs to be made multi-arch-aware (it hard-codes x86_64 in some places), when it calls mock, and then it needs some HW (we have ppc64le and s390x even now, aarch64 might take a while), overall it looks doable to me. Cole, what do you think?

I'm open to the idea in theory but in practice right now the script uses mock locally so it's basically tied to the one build machine I use which is x86. I have arm32 and aarch64 hardware locally but TBH I have very little interest in running a build farm and dealing with all the issues of connecting to remote machines, pulling down build output, etc. In fact I've been meaning to move virt-preview to copr for a long while which is going to tie it even deeper to x86, this would make virt-preview easier to enable and let me scrap much of my custom code for building/uploading repo contents.

copr would give us ppc64le and probably aarch64 too in addition to x86, but can't help with s390. We already have build infra internally covering all arches driven by Jenkins, with plans to move the workloads to CentOS infra. I'll look whether or how it could be used for multi-arch virt-preview repos.

...

We could re-implement it using koji scratch builds which have multiple arch support nowadays but I did that in the past for x86 and I recall feeling it was quite brittle, though I don't remember the details, maybe it was just my implementation.

I suspect the problem with koji scratch builds in this case is that they can't be used in buildroots, which the virt-preview stack requires.

Good point, but generally virt-preview packages are very loosely coupled and don't have strong version dependencies on one another. Occasionally a small dependency needs to be updated like libiscsi or libcacard but in fact it's been a long time since that's been required. - Cole

On 03/01/2018 09:49 AM, Viktor Mihajlovski wrote:

On 28.02.2018 17:27, Cole Robinson wrote:

...

On 02/28/2018 03:39 AM, Dan Horák wrote:

...

On Tue, 27 Feb 2018 16:26:28 -0500 Cole Robinson <crobinso@redhat.com> wrote:

...

On 02/27/2018 08:03 AM, Dan Horák wrote:

...

On Tue, 27 Feb 2018 13:54:06 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

...

On 27.02.2018 13:35, Nir Soffer wrote: > בתאריך יום ג׳, 27 בפבר׳ 2018, 13:25, מאת Dan Horák > ‏<dan@danny.cz>: > >> On Tue, 27 Feb 2018 10:13:15 +0100 >> Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote: >> >>> On 27.02.2018 01:26, Nir Soffer wrote: >>>> בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul >>>> ‏<ykaul@redhat.com>: >>>> >>>>> On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < >>>>> mihajlov@linux.vnet.ibm.com> wrote: >>>>> >>>>>> I just tried to update the ovirt packages on my FC27 host, >>>>>> but failed due to https://gerrit.ovirt.org/#/c/87628/ >>>>>> >>>>>> vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has >>>>>> only 3.7.0-4 the moment. >>>>>> >>>>>> It's generic Fedora 27, but since I run on s390, >>>>>> cross-posting to s390 list. >>>>>> >>>>>> I guess there's good reason to require libvirt 3.10. Is there >>>>>> any chance that we can get libvirt updated for Fedora 27? >>>>>> >>>>> >>>>> Perhaps use the virt-preview[1] repo for now? >>>>> >>>> >>>> Yes, we require virt-preview for Fedora. This is why that patch >>>> did not fail in the CI. >>> Makes sense, unfortunately virt-preview doesn't contains s390 >>> binaries at this point in time. Would be great if at least >>> libvirt and qemu could be built for s390. >> >> looks like it's even x86_64 only, /me wonders what it would >> require to offer other arches (aarch64, ppc64le, s390x) as well >> > > If we need to support platform not supported in virt-preview, we > need to chage the requirement so it is used only on x86_64. > > Victor, would you like to send a patch? I believe there was a good reason to bump the libvirt requirement in the vdsm package (some bugfix). Ideally, virt-preview should be build for s390 as well. If I'm not mistaking, the script https://github.com/crobinso/build-fedora-virt-preview is used to build the RPMs and populate the repository.

Dan, Cole: what would it take to run this on the fedora-390 build machine?

after a brief look the script needs to be made multi-arch-aware (it hard-codes x86_64 in some places), when it calls mock, and then it needs some HW (we have ppc64le and s390x even now, aarch64 might take a while), overall it looks doable to me. Cole, what do you think?

I'm open to the idea in theory but in practice right now the script uses mock locally so it's basically tied to the one build machine I use which is x86. I have arm32 and aarch64 hardware locally but TBH I have very little interest in running a build farm and dealing with all the issues of connecting to remote machines, pulling down build output, etc. In fact I've been meaning to move virt-preview to copr for a long while which is going to tie it even deeper to x86, this would make virt-preview easier to enable and let me scrap much of my custom code for building/uploading repo contents.

copr would give us ppc64le and probably aarch64 too in addition to x86, but can't help with s390. We already have build infra internally covering all arches driven by Jenkins, with plans to move the workloads to CentOS infra. I'll look whether or how it could be used for multi-arch virt-preview repos.

...

We could re-implement it using koji scratch builds which have multiple arch support nowadays but I did that in the past for x86 and I recall feeling it was quite brittle, though I don't remember the details, maybe it was just my implementation.

I suspect the problem with koji scratch builds in this case is that they can't be used in buildroots, which the virt-preview stack requires.

Good point, but generally virt-preview packages are very loosely coupled and don't have strong version dependencies on one another. Occasionally a small dependency needs to be updated like libiscsi or libcacard but in fact it's been a long time since that's been required.

- Cole

Hi Cole, for the time being I've patched vdsm to require libvirt 3.7.0-4 (which contains the hotplug patch required by vdsm). Unfortunately, this release is still only in updates-testing, which lead to a build failure on ovirt Jenkins. Do you have an idea by when 3.7.0-4 will be propagated to fedora updates? Thanks!

I submitted it for 'updates' yesterday, so whenever the next compose is. Is this about vdsm packages in fedora, or an external repo that builds packages for upstream? - Cole

On Tue, Feb 27, 2018 at 2:54 PM Viktor Mihajlovski < mihajlov@linux.vnet.ibm.com> wrote:

On 27.02.2018 13:35, Nir Soffer wrote:

...

בתאריך יום ג׳, 27 בפבר׳ 2018, 13:25, מאת Dan Horák ‏<dan@danny.cz>:

...

On Tue, 27 Feb 2018 10:13:15 +0100 Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> wrote:

...

On 27.02.2018 01:26, Nir Soffer wrote:

...

בתאריך יום ב׳, 26 בפבר׳ 2018, 22:10, מאת Yaniv Kaul ‏<ykaul@redhat.com>:

...

On Mon, Feb 26, 2018 at 7:17 PM, Viktor Mihajlovski < mihajlov@linux.vnet.ibm.com> wrote:

> I just tried to update the ovirt packages on my FC27 host, but > failed due to https://gerrit.ovirt.org/#/c/87628/ > > vdsm now requires libvirt >= 3.10.0-132 but Fedora 27 has only > 3.7.0-4 the moment. > > It's generic Fedora 27, but since I run on s390, cross-posting to > s390 list. > > I guess there's good reason to require libvirt 3.10. Is there any > chance that we can get libvirt updated for Fedora 27? >

Perhaps use the virt-preview[1] repo for now?

Yes, we require virt-preview for Fedora. This is why that patch did not fail in the CI. Makes sense, unfortunately virt-preview doesn't contains s390 binaries at this point in time. Would be great if at least libvirt and qemu could be built for s390.

looks like it's even x86_64 only, /me wonders what it would require to offer other arches (aarch64, ppc64le, s390x) as well

If we need to support platform not supported in virt-preview, we need to chage the requirement so it is used only on x86_64.

Victor, would you like to send a patch? I believe there was a good reason to bump the libvirt requirement in the vdsm package (some bugfix).

There was a very good reason to require this fix.

Ideally, virt-preview should be build for s390 as well.

This is the right thing to do for long term. But Looking at the related bug, it seems that the fix is available in libvirt-3.7.0-4.fc27, and there is no need to require 3.10. Waiting for confirmation from libvirt folks about this.

If I'm not mistaking, the script https://github.com/crobinso/build-fedora-virt-preview is used to build the RPMs and populate the repository.

Dan, Cole: what would it take to run this on the fedora-390 build machine?

...

...

Dan

...

[...] -- Regards, Viktor Mihajlovski _______________________________________________ s390x mailing list -- s390x@lists.fedoraproject.org To unsubscribe send an email to s390x-leave@lists.fedoraproject.org

-- Regards, Viktor Mihajlovski