How to build a particular module of code
Hi, I have a simple query. Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part? Thanks in advance. Shubham
I never do it, but https://www.ovirt.org/develop/developer-guide/engine/engine-development-envi... has an example : To rebuild a single artifact, for example utils: make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils" You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :) Greg On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
Hi, I have a simple query.
Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part?
Thanks in advance.
Shubham
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
Thanks, This is exactly what I needed:) On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
I never do it, but
https://www.ovirt.org/develop/developer-guide/engine/engine- development-environment has an example :
To rebuild a single artifact, for example utils:
make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :)
Greg
On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
Hi, I have a simple query.
Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part?
Thanks in advance.
Shubham
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb" but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb Am I doing something wrong? On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
I never do it, but
https://www.ovirt.org/develop/developer-guide/engine/engine- development-environment has an example :
To rebuild a single artifact, for example utils:
make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :)
Greg
On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
Hi, I have a simple query.
Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part?
Thanks in advance.
Shubham
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
The answer is in the pom.xml of uicommonweb, in its groupId: grep parent -A 1 frontend/webadmin/modules/uicommonweb/pom.xml So change it to "-pl *org.ovirt.engine.ui*:uicommonweb" On Tue, 17 Oct 2017 at 21:54 shubham dubey <sdubey504@gmail.com> wrote:
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb"
but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb
Am I doing something wrong?
On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
I never do it, but
https://www.ovirt.org/develop/developer-guide/engine/engine-development-envi... has an example :
To rebuild a single artifact, for example utils:
make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :)
Greg
On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
Hi, I have a simple query.
Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part?
Thanks in advance.
Shubham
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
Thanks,it worked. On Wed, Oct 18, 2017 at 1:24 AM, Roy Golan <rgolan@redhat.com> wrote:
The answer is in the pom.xml of uicommonweb, in its groupId: grep parent -A 1 frontend/webadmin/modules/uicommonweb/pom.xml
So change it to "-pl *org.ovirt.engine.ui*:uicommonweb"
On Tue, 17 Oct 2017 at 21:54 shubham dubey <sdubey504@gmail.com> wrote:
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb"
but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb
Am I doing something wrong?
On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
I never do it, but
https://www.ovirt.org/develop/developer-guide/engine/engine- development-environment has an example :
To rebuild a single artifact, for example utils:
make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :)
Greg
On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
Hi, I have a simple query.
Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part?
Thanks in advance.
Shubham
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
Since I needed to do a bunch of ovirt-engine recompiles today and I'm disabling checks to make it go faster, I figured I'd share: make install-dev PREFIX=/home/greg/ovirt-engine DEV_EXTRA_BUILD_FLAGS="-Danimal.sniffer.skip -Dcheckstyle.skip -Dgwt.compiler.localWorkers=1" DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.cssResourceStyle=pretty -Dgwt.userAgent=safari" BUILD_UT=0 BUILD_GWT=1 make install-dev -- note I left out "clean", so that speeds things up -Danimal.sniffer.skip -- skips animal sniffer [1], which takes quite some time -Dcheckstyle.skip -- skips checkstyle, which also takes much time -Dgwt.cssResourceStyle=pretty -- doesn't completely obfuscate classes in GWT, which allows you to use Dev Tools to inspect elements and see exactly where they come from [example: <div class="row GHW0VSTPAD-org-ovirt-engine-ui-common-widget-uicommon-NetworkFilterParameterEditor_WidgetUiBinderImpl_GenCss_style-wrapper"> shows me I need to go right to the NetworkFilterParameterEditor class to mess with this widget, specifically the "wrapper" css style -Dgwt.userAgent=safari -- if building GWT, build only 1 permutation for Chrome/Safari -Dgwt.compiler.localWorkers=1 -- use 1 thread for compiling GWT. Since I only used Safari, it's not necessary to have this here on this particular compile run, but you'll want to use this when doing more than 1 permutation/browser. It'll help prevent a crash during GWT compile, which, of course, is the ultimate time waster :) BUILD_UT=0 -- skip unit tests BUILD_GWT=1 -- if you don't need a GWT rebuild, change to 0 for a *huge* speedup :) [there must be a way to have that auto-detected ... hmm ...] ... Before pushing a final version of a patch, you should enable the checks and make sure they all pass. (They do run in CI, though.) Best wishes, Greg [1] http://www.mojohaus.org/animal-sniffer/ On Tue, Oct 17, 2017 at 4:01 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks,it worked.
On Wed, Oct 18, 2017 at 1:24 AM, Roy Golan <rgolan@redhat.com> wrote:
The answer is in the pom.xml of uicommonweb, in its groupId: grep parent -A 1 frontend/webadmin/modules/uicommonweb/pom.xml
So change it to "-pl *org.ovirt.engine.ui*:uicommonweb"
On Tue, 17 Oct 2017 at 21:54 shubham dubey <sdubey504@gmail.com> wrote:
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb"
but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb
Am I doing something wrong?
On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
I never do it, but
https://www.ovirt.org/develop/developer-guide/engine/engine- development-environment has an example :
To rebuild a single artifact, for example utils:
make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :)
Greg
On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
Hi, I have a simple query.
Whenever I do any change in my code I run "make install-dev PREFIX="$HOME/ovirt-engine"". But it takes a large time to compile. I think there is a way to compile only that part of code which I have changed. Like if I make changes in uicommonweb then, how I compile only that part?
Thanks in advance.
Shubham
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
On Thu, 19 Oct 2017 at 20:12 Greg Sheremeta <gshereme@redhat.com> wrote:
Since I needed to do a bunch of ovirt-engine recompiles today and I'm disabling checks to make it go faster, I figured I'd share:
make install-dev PREFIX=/home/greg/ovirt-engine DEV_EXTRA_BUILD_FLAGS="-Danimal.sniffer.skip -Dcheckstyle.skip -Dgwt.compiler.localWorkers=1" DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.cssResourceStyle=pretty -Dgwt.userAgent=safari" BUILD_UT=0 BUILD_GWT=1
make install-dev -- note I left out "clean", so that speeds things up
Then this worth a new make rule for 'install-dev-quick' or similar that will have all of those inside. another option is to add a SKIP_CHECKS=1 that will achieve the same without extra rule: make install-dev SKIP_CHECKS=1
-Danimal.sniffer.skip -- skips animal sniffer [1], which takes quite some time
-Dcheckstyle.skip -- skips checkstyle, which also takes much time
-Dgwt.cssResourceStyle=pretty -- doesn't completely obfuscate classes in GWT, which allows you to use Dev Tools to inspect elements and see exactly where they come from [example: <div class="row GHW0VSTPAD-org-ovirt-engine-ui-common-widget-uicommon-NetworkFilterParameterEditor_WidgetUiBinderImpl_GenCss_style-wrapper"> shows me I need to go right to the NetworkFilterParameterEditor class to mess with this widget, specifically the "wrapper" css style
-Dgwt.userAgent=safari -- if building GWT, build only 1 permutation for Chrome/Safari
-Dgwt.compiler.localWorkers=1 -- use 1 thread for compiling GWT. Since I only used Safari, it's not necessary to have this here on this particular compile run, but you'll want to use this when doing more than 1 permutation/browser. It'll help prevent a crash during GWT compile, which, of course, is the ultimate time waster :)
BUILD_UT=0 -- skip unit tests
BUILD_GWT=1 -- if you don't need a GWT rebuild, change to 0 for a *huge* speedup :) [there must be a way to have that auto-detected ... hmm ...]
...
Before pushing a final version of a patch, you should enable the checks and make sure they all pass. (They do run in CI, though.)
Best wishes, Greg
[1] http://www.mojohaus.org/animal-sniffer/
On Tue, Oct 17, 2017 at 4:01 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks,it worked.
On Wed, Oct 18, 2017 at 1:24 AM, Roy Golan <rgolan@redhat.com> wrote:
The answer is in the pom.xml of uicommonweb, in its groupId: grep parent -A 1 frontend/webadmin/modules/uicommonweb/pom.xml
So change it to "-pl *org.ovirt.engine.ui*:uicommonweb"
On Tue, 17 Oct 2017 at 21:54 shubham dubey <sdubey504@gmail.com> wrote:
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb"
but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb
Am I doing something wrong?
On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
I never do it, but
https://www.ovirt.org/develop/developer-guide/engine/engine-development-envi... has an example :
To rebuild a single artifact, for example utils:
make clean install-dev PREFIX=$HOME/ovirt-engine \ EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
You can also disable animal sniffer, check style, unit tests, and GWT to speed things up. Just make sure they actually run before you push :)
Greg
On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> wrote:
> Hi, > I have a simple query. > > Whenever I do any change in my code I > run "make install-dev PREFIX="$HOME/ovirt-engine"". > But it takes a large time to compile. > I think there is a way to compile only that part of code > which I have changed. Like if I make changes in > uicommonweb then, how I compile only that part? > > Thanks in advance. > > Shubham > > _______________________________________________ > Devel mailing list > Devel@ovirt.org > http://lists.ovirt.org/mailman/listinfo/devel >
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
On Thu, Oct 19, 2017 at 3:08 PM, Roy Golan <rgolan@redhat.com> wrote:
On Thu, 19 Oct 2017 at 20:12 Greg Sheremeta <gshereme@redhat.com> wrote:
Since I needed to do a bunch of ovirt-engine recompiles today and I'm disabling checks to make it go faster, I figured I'd share:
make install-dev PREFIX=/home/greg/ovirt-engine DEV_EXTRA_BUILD_FLAGS="-Danimal.sniffer.skip -Dcheckstyle.skip -Dgwt.compiler.localWorkers=1" DEV_EXTRA_BUILD_FLAGS_GWT_ DEFAULTS="-Dgwt.cssResourceStyle=pretty -Dgwt.userAgent=safari" BUILD_UT=0 BUILD_GWT=1
make install-dev -- note I left out "clean", so that speeds things up
Then this worth a new make rule for 'install-dev-quick' or similar that will have all of those inside. another option is to add a SKIP_CHECKS=1 that will achieve the same without extra rule:
make install-dev SKIP_CHECKS=1
Yeah, lol, that would be simpler :)
-Danimal.sniffer.skip -- skips animal sniffer [1], which takes quite some time
-Dcheckstyle.skip -- skips checkstyle, which also takes much time
-Dgwt.cssResourceStyle=pretty -- doesn't completely obfuscate classes in GWT, which allows you to use Dev Tools to inspect elements and see exactly where they come from [example: <div class="row GHW0VSTPAD-org-ovirt-engine- ui-common-widget-uicommon-NetworkFilterParameterEditor_ WidgetUiBinderImpl_GenCss_style-wrapper"> shows me I need to go right to the NetworkFilterParameterEditor class to mess with this widget, specifically the "wrapper" css style
-Dgwt.userAgent=safari -- if building GWT, build only 1 permutation for Chrome/Safari
-Dgwt.compiler.localWorkers=1 -- use 1 thread for compiling GWT. Since I only used Safari, it's not necessary to have this here on this particular compile run, but you'll want to use this when doing more than 1 permutation/browser. It'll help prevent a crash during GWT compile, which, of course, is the ultimate time waster :)
BUILD_UT=0 -- skip unit tests
BUILD_GWT=1 -- if you don't need a GWT rebuild, change to 0 for a *huge* speedup :) [there must be a way to have that auto-detected ... hmm ...]
...
Before pushing a final version of a patch, you should enable the checks and make sure they all pass. (They do run in CI, though.)
Best wishes, Greg
[1] http://www.mojohaus.org/animal-sniffer/
On Tue, Oct 17, 2017 at 4:01 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks,it worked.
On Wed, Oct 18, 2017 at 1:24 AM, Roy Golan <rgolan@redhat.com> wrote:
The answer is in the pom.xml of uicommonweb, in its groupId: grep parent -A 1 frontend/webadmin/modules/uicommonweb/pom.xml
So change it to "-pl *org.ovirt.engine.ui*:uicommonweb"
On Tue, 17 Oct 2017 at 21:54 shubham dubey <sdubey504@gmail.com> wrote:
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb"
but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb
Am I doing something wrong?
On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com > wrote:
> I never do it, but > > https://www.ovirt.org/develop/developer-guide/engine/engine- > development-environment has an example : > > > To rebuild a single artifact, for example utils: > > make clean install-dev PREFIX=$HOME/ovirt-engine \ > EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils" > > > You can also disable animal sniffer, check style, unit tests, and > GWT to speed things up. Just make sure they actually run before you push :) > > Greg > > On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> > wrote: > >> Hi, >> I have a simple query. >> >> Whenever I do any change in my code I >> run "make install-dev PREFIX="$HOME/ovirt-engine"". >> But it takes a large time to compile. >> I think there is a way to compile only that part of code >> which I have changed. Like if I make changes in >> uicommonweb then, how I compile only that part? >> >> Thanks in advance. >> >> Shubham >> >> _______________________________________________ >> Devel mailing list >> Devel@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/devel >> >
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
👍 On Thu, Oct 19, 2017 at 9:08 PM, Roy Golan <rgolan@redhat.com> wrote:
On Thu, 19 Oct 2017 at 20:12 Greg Sheremeta <gshereme@redhat.com> wrote:
Since I needed to do a bunch of ovirt-engine recompiles today and I'm disabling checks to make it go faster, I figured I'd share:
make install-dev PREFIX=/home/greg/ovirt-engine DEV_EXTRA_BUILD_FLAGS="-Danimal.sniffer.skip -Dcheckstyle.skip -Dgwt.compiler.localWorkers=1" DEV_EXTRA_BUILD_FLAGS_GWT_ DEFAULTS="-Dgwt.cssResourceStyle=pretty -Dgwt.userAgent=safari" BUILD_UT=0 BUILD_GWT=1
make install-dev -- note I left out "clean", so that speeds things up
Then this worth a new make rule for 'install-dev-quick' or similar that will have all of those inside. another option is to add a SKIP_CHECKS=1 that will achieve the same without extra rule:
make install-dev SKIP_CHECKS=1
-Danimal.sniffer.skip -- skips animal sniffer [1], which takes quite some time
-Dcheckstyle.skip -- skips checkstyle, which also takes much time
-Dgwt.cssResourceStyle=pretty -- doesn't completely obfuscate classes in GWT, which allows you to use Dev Tools to inspect elements and see exactly where they come from [example: <div class="row GHW0VSTPAD-org-ovirt-engine- ui-common-widget-uicommon-NetworkFilterParameterEditor_ WidgetUiBinderImpl_GenCss_style-wrapper"> shows me I need to go right to the NetworkFilterParameterEditor class to mess with this widget, specifically the "wrapper" css style
-Dgwt.userAgent=safari -- if building GWT, build only 1 permutation for Chrome/Safari
-Dgwt.compiler.localWorkers=1 -- use 1 thread for compiling GWT. Since I only used Safari, it's not necessary to have this here on this particular compile run, but you'll want to use this when doing more than 1 permutation/browser. It'll help prevent a crash during GWT compile, which, of course, is the ultimate time waster :)
BUILD_UT=0 -- skip unit tests
BUILD_GWT=1 -- if you don't need a GWT rebuild, change to 0 for a *huge* speedup :) [there must be a way to have that auto-detected ... hmm ...]
...
Before pushing a final version of a patch, you should enable the checks and make sure they all pass. (They do run in CI, though.)
Best wishes, Greg
[1] http://www.mojohaus.org/animal-sniffer/
On Tue, Oct 17, 2017 at 4:01 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks,it worked.
On Wed, Oct 18, 2017 at 1:24 AM, Roy Golan <rgolan@redhat.com> wrote:
The answer is in the pom.xml of uicommonweb, in its groupId: grep parent -A 1 frontend/webadmin/modules/uicommonweb/pom.xml
So change it to "-pl *org.ovirt.engine.ui*:uicommonweb"
On Tue, 17 Oct 2017 at 21:54 shubham dubey <sdubey504@gmail.com> wrote:
Hi, I have tried to build uicommonweb alone using make install-dev PREFIX="$HOME/ovirt-engine" EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:uicommonweb"
but getting error that [ERROR] Could not find the selected project in the reactor: org.ovirt.engine.core:uicommonweb
Am I doing something wrong?
On Tue, Oct 17, 2017 at 11:50 PM, shubham dubey <sdubey504@gmail.com> wrote:
Thanks, This is exactly what I needed:)
On Tue, Oct 17, 2017 at 11:37 PM, Greg Sheremeta <gshereme@redhat.com > wrote:
> I never do it, but > > https://www.ovirt.org/develop/developer-guide/engine/engine- > development-environment has an example : > > > To rebuild a single artifact, for example utils: > > make clean install-dev PREFIX=$HOME/ovirt-engine \ > EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils" > > > You can also disable animal sniffer, check style, unit tests, and > GWT to speed things up. Just make sure they actually run before you push :) > > Greg > > On Oct 17, 2017 1:56 PM, "shubham dubey" <sdubey504@gmail.com> > wrote: > >> Hi, >> I have a simple query. >> >> Whenever I do any change in my code I >> run "make install-dev PREFIX="$HOME/ovirt-engine"". >> But it takes a large time to compile. >> I think there is a way to compile only that part of code >> which I have changed. Like if I make changes in >> uicommonweb then, how I compile only that part? >> >> Thanks in advance. >> >> Shubham >> >> _______________________________________________ >> Devel mailing list >> Devel@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/devel >> >
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
participants (4)
-
Greg Sheremeta -
Jakub Niedermertl -
Roy Golan -
shubham dubey