On Wed, Apr 12, 2017 at 11:34 AM, shubham dubey <sdubey504(a)gmail.com&gt; wrote: > Hello, > Recently I have installed ovirt-engine development environment. The > snapshot repository I have used > is ovirt-release-master. > Now I have installed vdsm in ovirt host with ovirt-release41, so when I > am trying to add the host it is > showing that ovirt node support cluster version 3.9,4.0 and 4.1 but 4.2 > is available. > So I have decided to installed ovirt engine with ovirt-engine41 > repository. The steps I follow are :- > 1) yum remove ovirt-release-master.noarch > 2) yum install ovirt-release41.noarch > 3) delete $HOME/ovirt-engine and $HOME/git/ovirt-engine > 4) git clone ovirt-engine again > 5) make install-dev PREFIX=$HOME/ovirt-engine > > The compiling ends successfully but the $HOME/ovirt-engine directory is > coming out empty. > Maybe some permission or similar issues on the $HOME/ovirt-engine dir. You can try to redeploy again using: make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0 to see if it passes or if it complains > So $HOME/ovirt-engine/bin/engine-setup is giving error that NO file or > directory found. > So can anyone tell me what I am doing wrong? > > Note:One more thing I have noticed is that even after changing repo to > ovirt 4.1 the make is still compiling ovirt 4.2 snapshot. > > Thanks, > Shubham > > _______________________________________________ > Devel mailing list > Devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/devel >

On Wed, Apr 12, 2017 at 1:51 PM, shubham dubey <sdubey504(a)gmail.com&gt; wrote: > that doesn't work. > what does it do? Please paste the output > > On Wed, Apr 12, 2017 at 4:13 PM, Tomas Jelinek <tjelinek(a)redhat.com&gt; > wrote: > >> >> >> On Wed, Apr 12, 2017 at 11:34 AM, shubham dubey <sdubey504(a)gmail.com&gt; >> wrote: >> >>> Hello, >>> Recently I have installed ovirt-engine development environment. The >>> snapshot repository I have used >>> is ovirt-release-master. >>> Now I have installed vdsm in ovirt host with ovirt-release41, so when I >>> am trying to add the host it is >>> showing that ovirt node support cluster version 3.9,4.0 and 4.1 but 4.2 >>> is available. >>> So I have decided to installed ovirt engine with ovirt-engine41 >>> repository. The steps I follow are :- >>> 1) yum remove ovirt-release-master.noarch >>> 2) yum install ovirt-release41.noarch >>> 3) delete $HOME/ovirt-engine and $HOME/git/ovirt-engine >>> 4) git clone ovirt-engine again >>> 5) make install-dev PREFIX=$HOME/ovirt-engine >>> >>> The compiling ends successfully but the $HOME/ovirt-engine directory is >>> coming out empty. >>> >> >> Maybe some permission or similar issues on the $HOME/ovirt-engine dir. >> You can try to redeploy again using: >> make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0 >> to see if it passes or if it complains >> >> >>> So $HOME/ovirt-engine/bin/engine-setup is giving error that NO file or >>> directory found. >>> So can anyone tell me what I am doing wrong? >>> >>> Note:One more thing I have noticed is that even after changing repo to >>> ovirt 4.1 the make is still compiling ovirt 4.2 snapshot. >>> >>> Thanks, >>> Shubham >>> >>> _______________________________________________ >>> Devel mailing list >>> Devel(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/devel >>> >> >> >

For pretty much any open source project, you can install previous versions by checking out "tags". That's one very important reason why we tag things. greg@greg-x1:~/projects/ovirt-engine(master|✔) $ git checkout ovirt-engine-4.0.7 Note: checking out 'ovirt-engine-4.0.7'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b <new-branch-name> HEAD is now at e00e36d... build: ovirt-engine-4.0.7 greg@greg-x1:~/projects/ovirt-engine(:e00e36d|✔) $ make clean install-dev PREFIX=$HOME/ovirt-engine On Wed, Apr 12, 2017 at 12:40 PM, shubham dubey <sdubey504(a)gmail.com&gt; wrote: > I just delete the ovirt-engine folder and .m2/repository folder and > recompile it and it just work.:) > But one thing I want to clarify is that can I only install ovirt 4.2 > through source or I can install previous versions also? > > Thanks, > Shubham > > On Wed, Apr 12, 2017 at 5:22 PM, Tomas Jelinek <tjelinek(a)redhat.com&gt; > wrote: > >> >> >> On Wed, Apr 12, 2017 at 1:51 PM, shubham dubey <sdubey504(a)gmail.com&gt; >> wrote: >> >>> that doesn't work. >>> >> >> what does it do? Please paste the output >> >> >>> >>> On Wed, Apr 12, 2017 at 4:13 PM, Tomas Jelinek <tjelinek(a)redhat.com&gt; >>> wrote: >>> >>>> >>>> >>>> On Wed, Apr 12, 2017 at 11:34 AM, shubham dubey <sdubey504(a)gmail.com&gt; >>>> wrote: >>>> >>>>> Hello, >>>>> Recently I have installed ovirt-engine development environment. The >>>>> snapshot repository I have used >>>>> is ovirt-release-master. >>>>> Now I have installed vdsm in ovirt host with ovirt-release41, so when >>>>> I am trying to add the host it is >>>>> showing that ovirt node support cluster version 3.9,4.0 and 4.1 but >>>>> 4.2 is available. >>>>> So I have decided to installed ovirt engine with ovirt-engine41 >>>>> repository. The steps I follow are :- >>>>> 1) yum remove ovirt-release-master.noarch >>>>> 2) yum install ovirt-release41.noarch >>>>> 3) delete $HOME/ovirt-engine and $HOME/git/ovirt-engine >>>>> 4) git clone ovirt-engine again >>>>> 5) make install-dev PREFIX=$HOME/ovirt-engine >>>>> >>>>> The compiling ends successfully but the $HOME/ovirt-engine directory >>>>> is coming out empty. >>>>> >>>> >>>> Maybe some permission or similar issues on the $HOME/ovirt-engine dir. >>>> You can try to redeploy again using: >>>> make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0 >>>> to see if it passes or if it complains >>>> >>>> >>>>> So $HOME/ovirt-engine/bin/engine-setup is giving error that NO file >>>>> or directory found. >>>>> So can anyone tell me what I am doing wrong? >>>>> >>>>> Note:One more thing I have noticed is that even after changing repo >>>>> to ovirt 4.1 the make is still compiling ovirt 4.2 snapshot. >>>>> >>>>> Thanks, >>>>> Shubham >>>>> >>>>> _______________________________________________ >>>>> Devel mailing list >>>>> Devel(a)ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/devel >>>>> >>>> >>>> >>> >> > > _______________________________________________ > Devel mailing list > Devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/devel > -- Greg Sheremeta, MBA Sr. Software Engineer Red Hat, Inc. gshereme(a)redhat.com

You can also try ovirt-vdsmfake [1] if you just need to add some fake hosts to your dev. env. [1] https://gerrit.ovirt.org/#/admin/projects/ovirt-vdsmfake Vojtech On Wed, Apr 12, 2017 at 7:24 PM, shubham dubey <sdubey504(a)gmail.com&gt; wrote: > Thanks for explanation, I completely understand it now. > > On Wed, Apr 12, 2017 at 10:17 PM, Greg Sheremeta <gshereme(a)redhat.com&gt; > wrote: > >> For pretty much any open source project, you can install previous >> versions by checking out "tags". That's one very important reason why we >> tag things. >> >> greg@greg-x1:~/projects/ovirt-engine(master|✔) $ git checkout >> ovirt-engine-4.0.7 >> Note: checking out 'ovirt-engine-4.0.7'. >> >> You are in 'detached HEAD' state. You can look around, make experimental >> changes and commit them, and you can discard any commits you make in this >> state without impacting any branches by performing another checkout. >> >> If you want to create a new branch to retain commits you create, you may >> do so (now or later) by using -b with the checkout command again. >> Example: >> >> git checkout -b <new-branch-name> >> >> HEAD is now at e00e36d... build: ovirt-engine-4.0.7 >> >> greg@greg-x1:~/projects/ovirt-engine(:e00e36d|✔) $ make clean >> install-dev PREFIX=$HOME/ovirt-engine >> >> >> On Wed, Apr 12, 2017 at 12:40 PM, shubham dubey <sdubey504(a)gmail.com&gt; >> wrote: >> >>> I just delete the ovirt-engine folder and .m2/repository folder and >>> recompile it and it just work.:) >>> But one thing I want to clarify is that can I only install ovirt 4.2 >>> through source or I can install previous versions also? >>> >>> Thanks, >>> Shubham >>> >>> On Wed, Apr 12, 2017 at 5:22 PM, Tomas Jelinek <tjelinek(a)redhat.com&gt; >>> wrote: >>> >>>> >>>> >>>> On Wed, Apr 12, 2017 at 1:51 PM, shubham dubey <sdubey504(a)gmail.com&gt; >>>> wrote: >>>> >>>>> that doesn't work. >>>>> >>>> >>>> what does it do? Please paste the output >>>> >>>> >>>>> >>>>> On Wed, Apr 12, 2017 at 4:13 PM, Tomas Jelinek <tjelinek(a)redhat.com&gt; >>>>> wrote: >>>>> >>>>>> >>>>>> >>>>>> On Wed, Apr 12, 2017 at 11:34 AM, shubham dubey <sdubey504(a)gmail.com >>>>>> > wrote: >>>>>> >>>>>>> Hello, >>>>>>> Recently I have installed ovirt-engine development environment. The >>>>>>> snapshot repository I have used >>>>>>> is ovirt-release-master. >>>>>>> Now I have installed vdsm in ovirt host with ovirt-release41, so >>>>>>> when I am trying to add the host it is >>>>>>> showing that ovirt node support cluster version 3.9,4.0 and 4.1 but >>>>>>> 4.2 is available. >>>>>>> So I have decided to installed ovirt engine with ovirt-engine41 >>>>>>> repository. The steps I follow are :- >>>>>>> 1) yum remove ovirt-release-master.noarch >>>>>>> 2) yum install ovirt-release41.noarch >>>>>>> 3) delete $HOME/ovirt-engine and $HOME/git/ovirt-engine >>>>>>> 4) git clone ovirt-engine again >>>>>>> 5) make install-dev PREFIX=$HOME/ovirt-engine >>>>>>> >>>>>>> The compiling ends successfully but the $HOME/ovirt-engine >>>>>>> directory is coming out empty. >>>>>>> >>>>>> >>>>>> Maybe some permission or similar issues on the $HOME/ovirt-engine >>>>>> dir. You can try to redeploy again using: >>>>>> make install-dev PREFIX=$HOME/ovirt-engine DEV_REBUILD=0 >>>>>> to see if it passes or if it complains >>>>>> >>>>>> >>>>>>> So $HOME/ovirt-engine/bin/engine-setup is giving error that NO >>>>>>> file or directory found. >>>>>>> So can anyone tell me what I am doing wrong? >>>>>>> >>>>>>> Note:One more thing I have noticed is that even after changing repo >>>>>>> to ovirt 4.1 the make is still compiling ovirt 4.2 snapshot. >>>>>>> >>>>>>> Thanks, >>>>>>> Shubham >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devel mailing list >>>>>>> Devel(a)ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/devel >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >>> _______________________________________________ >>> Devel mailing list >>> Devel(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/devel >>> >> >> >> >> -- >> Greg Sheremeta, MBA >> Sr. Software Engineer >> Red Hat, Inc. >> gshereme(a)redhat.com >> > > > _______________________________________________ > Devel mailing list > Devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/devel >