[Engine-devel] Change in default ports: 6090 and 6091
Hello, Some time ago I requested feedback about a change in the port numbers used by the engine, the details are in this thread: http://lists.ovirt.org/pipermail/engine-devel/2012-July/002089.html I didn't receive bad feedback, neither in the thread or in the proposed change in gerrit: http://gerrit.ovirt.org/6348 I tested it as much as I can, so I think it is ready for merge. Unless someone has an strong reason to not do this change I will merge it on Monday 27 afternoon. Remember that with this change the default ports used by the engine will be 6090 for HTTP and 6091 for HTTPS. This will affect RPM installations and also development environments, so next time you do "mvn -Psetup" your local installation of the application server will start using port 6090 instead of 8080. Also take into account that if you are using Apache as a proxy it will continue using ports 80 and 443 by default, no change there. If you have objections please let me know. Regards, Juan Hernández -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
On 08/24/2012 02:27 PM, Juan Hernandez wrote:
Hello,
Some time ago I requested feedback about a change in the port numbers used by the engine, the details are in this thread:
http://lists.ovirt.org/pipermail/engine-devel/2012-July/002089.html
I didn't receive bad feedback, neither in the thread or in the proposed change in gerrit:
I tested it as much as I can, so I think it is ready for merge. Unless someone has an strong reason to not do this change I will merge it on Monday 27 afternoon.
Remember that with this change the default ports used by the engine will be 6090 for HTTP and 6091 for HTTPS. This will affect RPM installations
danken - what is the range of spice ports used by vdsm (iirc they start with 5900) and what are the secure ports? juan - maybe something that close to spice/vnc ports to avoid collission on an all-in-one.
and also development environments, so next time you do "mvn -Psetup" your local installation of the application server will start using port 6090 instead of 8080.
Also take into account that if you are using Apache as a proxy it will continue using ports 80 and 443 by default, no change there.
If you have objections please let me know.
Regards, Juan Hernández
On 08/24/2012 01:42 PM, Itamar Heim wrote:
On 08/24/2012 02:27 PM, Juan Hernandez wrote:
Hello,
Some time ago I requested feedback about a change in the port numbers used by the engine, the details are in this thread:
http://lists.ovirt.org/pipermail/engine-devel/2012-July/002089.html
I didn't receive bad feedback, neither in the thread or in the proposed change in gerrit:
I tested it as much as I can, so I think it is ready for merge. Unless someone has an strong reason to not do this change I will merge it on Monday 27 afternoon.
Remember that with this change the default ports used by the engine will be 6090 for HTTP and 6091 for HTTPS. This will affect RPM installations
danken - what is the range of spice ports used by vdsm (iirc they start with 5900) and what are the secure ports? juan - maybe something that close to spice/vnc ports to avoid collission on an all-in-one.
Yes, it is be good idea to stay away from those spice and VNC port ranges. What about 8700 and 8701? They are also available according to /etc/services and IANA [1].
and also development environments, so next time you do "mvn -Psetup" your local installation of the application server will start using port 6090 instead of 8080.
Also take into account that if you are using Apache as a proxy it will continue using ports 80 and 443 by default, no change there.
If you have objections please let me know.
Regards, Juan Hernández
[1] http://www.iana.org/assignments/service-names-port-numbers/service-names-por... -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
On 08/24/2012 03:45 PM, Juan Hernandez wrote:
On 08/24/2012 01:42 PM, Itamar Heim wrote:
On 08/24/2012 02:27 PM, Juan Hernandez wrote:
Hello,
Some time ago I requested feedback about a change in the port numbers used by the engine, the details are in this thread:
http://lists.ovirt.org/pipermail/engine-devel/2012-July/002089.html
I didn't receive bad feedback, neither in the thread or in the proposed change in gerrit:
I tested it as much as I can, so I think it is ready for merge. Unless someone has an strong reason to not do this change I will merge it on Monday 27 afternoon.
Remember that with this change the default ports used by the engine will be 6090 for HTTP and 6091 for HTTPS. This will affect RPM installations
danken - what is the range of spice ports used by vdsm (iirc they start with 5900) and what are the secure ports? juan - maybe something that close to spice/vnc ports to avoid collission on an all-in-one.
Yes, it is be good idea to stay away from those spice and VNC port ranges. What about 8700 and 8701? They are also available according to /etc/services and IANA [1].
sounds good to me.
and also development environments, so next time you do "mvn -Psetup" your local installation of the application server will start using port 6090 instead of 8080.
Also take into account that if you are using Apache as a proxy it will continue using ports 80 and 443 by default, no change there.
If you have objections please let me know.
Regards, Juan Hernández
[1] http://www.iana.org/assignments/service-names-port-numbers/service-names-por...
Take two, using ports 8700 and 8701 to avoid overlap with VNC and spice ports in all in one configurations. Any objection? If not I will merge it end of day today. Yaniv, any objection from QA point of view? Eyal, do you foresee any problem in the CI environment? On 08/26/2012 09:36 AM, Itamar Heim wrote:
On 08/24/2012 03:45 PM, Juan Hernandez wrote:
On 08/24/2012 01:42 PM, Itamar Heim wrote:
On 08/24/2012 02:27 PM, Juan Hernandez wrote:
Hello,
Some time ago I requested feedback about a change in the port numbers used by the engine, the details are in this thread:
http://lists.ovirt.org/pipermail/engine-devel/2012-July/002089.html
I didn't receive bad feedback, neither in the thread or in the proposed change in gerrit:
I tested it as much as I can, so I think it is ready for merge. Unless someone has an strong reason to not do this change I will merge it on Monday 27 afternoon.
Remember that with this change the default ports used by the engine will be 6090 for HTTP and 6091 for HTTPS. This will affect RPM installations
danken - what is the range of spice ports used by vdsm (iirc they start with 5900) and what are the secure ports? juan - maybe something that close to spice/vnc ports to avoid collission on an all-in-one.
Yes, it is be good idea to stay away from those spice and VNC port ranges. What about 8700 and 8701? They are also available according to /etc/services and IANA [1].
sounds good to me.
and also development environments, so next time you do "mvn -Psetup" your local installation of the application server will start using port 6090 instead of 8080.
Also take into account that if you are using Apache as a proxy it will continue using ports 80 and 443 by default, no change there.
If you have objections please let me know.
Regards, Juan Hernández
[1] http://www.iana.org/assignments/service-names-port-numbers/service-names-por...
-- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
participants (2)
-
Itamar Heim -
Juan Hernandez