Hi, can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone? I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2. Thanks a million, Paul -- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
It seems like I am hitting this issue from release 3.6.0: - If cluster is updated to compatibility version 3.6 while hosts that have not been upgraded, i.e with emulated machine flags that do not match cluster compatibility version 3.6, you might end up with incorrect emulated machine flag on the cluster. As a result, you will not be able to run VMs. Possible workarounds would be to to reset the emulated machine on the cluster (requires putting all the hosts into maintenance) or disable the host-plug memory feature in the database. I clicked "reset emulated machines" on the cluster, while in maintenance mode. I checked vds_dynamic for the host, and found the columns supported_cluster_levels and supported_engine_levels to both be missing version 3.6. Paul On Sat, Feb 20, 2016 at 10:01 AM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
--Apple-Mail=_ECD3F43B-AB35-41DB-A461-3D6F3469ECE3 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii
On 20 Feb 2016, at 17:46, Paul Dyer <pmdyermms@gmail.com> wrote: =20 It seems like I am hitting this issue from release 3.6.0: =20 If cluster is updated to compatibility version 3.6 while hosts that = have not been upgraded, i.e with emulated machine flags that do not = match cluster compatibility version 3.6, you might end up with incorrect = emulated machine flag on the cluster. As a result, you will not be able = to run VMs. Possible workarounds would be to to reset the emulated = machine on the cluster (requires putting all the hosts into maintenance) = or disable the host-plug memory feature in the database.
I clicked "reset emulated machines" on the cluster, while in =
=20 Paul =20 On Sat, Feb 20, 2016 at 10:01 AM, Paul Dyer <pmdyermms@gmail.com = <mailto:pmdyermms@gmail.com>> wrote: Hi, =20 can anyone explain what this button does? I have looked in the = documentation but have found no reference to it. Will reinstall only = install packages and setting for the host, and leave = cluster/storage/networks alone? =20 I have a cluster version 3.6.2 that will not Activate the host because =
the latter is not a correct solution and should not be encouraged. maintenance mode. I checked vds_dynamic for the host, and found the = columns supported_cluster_levels and supported_engine_levels to both be = missing version 3.6. the message "Host .. is compatible with versions = (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was = part of a 3.5 cluster until the upgrade to 3.6.2.
=20 Thanks a million, =20 Paul =20 =20 =20 --=20 Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750 <tel:504-302-8750> =20 =20 --=20 Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750 _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
--Apple-Mail=_ECD3F43B-AB35-41DB-A461-3D6F3469ECE3 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=us-ascii <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" = class=3D""><br class=3D""><div><blockquote type=3D"cite" class=3D""><div = class=3D"">On 20 Feb 2016, at 17:46, Paul Dyer <<a = href=3D"mailto:pmdyermms@gmail.com" class=3D"">pmdyermms@gmail.com</a>>= wrote:</div><br class=3D"Apple-interchange-newline"><div class=3D""><div = dir=3D"ltr" class=3D"">It seems like I am hitting this issue from = release 3.6.0:<div class=3D""><br class=3D""></div><div class=3D""><ul = style=3D"margin-top:0px;margin-bottom:8.5pt;color:rgb(51,51,51);font-famil= y:'Source Sans Pro','Open Sans','Helvetica = Neue',Helvetica,Arial,sans-serif;font-size:16px;line-height:22.8571px" = class=3D""><li class=3D"">If cluster is updated to compatibility version = 3.6 while hosts that have not been upgraded, i.e with emulated machine = flags that do not match cluster compatibility version 3.6, you might end = up with incorrect emulated machine flag on the cluster. As a result, you = will not be able to run VMs. Possible workarounds would be to to reset = the emulated machine on the cluster (requires putting all the hosts into = maintenance) or disable the host-plug memory feature in the = database.</li></ul></div></div></div></blockquote><div><br = class=3D""></div>the latter is not a correct solution and should not be = encouraged.</div><div><br class=3D""><blockquote type=3D"cite" = class=3D""><div class=3D""><div dir=3D"ltr" class=3D""><div = class=3D""><div class=3D"">I clicked "reset emulated machines" on the = cluster, while in maintenance mode. I checked vds_dynamic for the = host, and found the columns supported_cluster_levels and = supported_engine_levels to both be missing version 3.6.<br = class=3D""></div></div><div class=3D""><br class=3D""></div><div = class=3D"">Paul</div></div><div class=3D"gmail_extra"><br class=3D""><div = class=3D"gmail_quote">On Sat, Feb 20, 2016 at 10:01 AM, Paul Dyer <span = dir=3D"ltr" class=3D""><<a href=3D"mailto:pmdyermms@gmail.com" = target=3D"_blank" class=3D"">pmdyermms@gmail.com</a>></span> = wrote:<br class=3D""><blockquote class=3D"gmail_quote" style=3D"margin:0 = 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir=3D"ltr" = class=3D"">Hi,<div class=3D""><br class=3D""></div><div class=3D"">can = anyone explain what this button does? I have looked in the = documentation but have found no reference to it. Will = reinstall only install packages and setting for the host, and leave = cluster/storage/networks alone?</div><div class=3D""><br = class=3D""></div><div class=3D"">I have a cluster version 3.6.2 that = will not Activate the host because the message "Host .. is compatible = with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". = The host was part of a 3.5 cluster until the upgrade to = 3.6.2.</div><div class=3D""><br class=3D""></div><div class=3D"">Thanks = a million,</div><div class=3D""><br class=3D""></div><div = class=3D"">Paul</div><span class=3D"HOEnZb"><font color=3D"#888888" = class=3D""><div class=3D""><br class=3D""></div><div class=3D""><br = class=3D""></div><div class=3D""><div class=3D""><br class=3D""></div>-- = <br class=3D""><div class=3D"">Paul Dyer,<br class=3D"">Mercury = Consulting Group, RHCE<br class=3D""><a href=3D"tel:504-302-8750" = value=3D"+15043028750" target=3D"_blank" class=3D"">504-302-8750</a></div>= </div></font></span></div> </blockquote></div><br class=3D""><br clear=3D"all" class=3D""><div = class=3D""><br class=3D""></div>-- <br class=3D""><div = class=3D"gmail_signature">Paul Dyer,<br class=3D"">Mercury Consulting = Group, RHCE<br class=3D"">504-302-8750</div> </div> _______________________________________________<br class=3D"">Devel = mailing list<br class=3D""><a href=3D"mailto:Devel@ovirt.org" = class=3D"">Devel@ovirt.org</a><br = class=3D"">http://lists.ovirt.org/mailman/listinfo/devel</div></blockquote=
</div><br class=3D""></body></html>=
--Apple-Mail=_ECD3F43B-AB35-41DB-A461-3D6F3469ECE3--
Hi Paul, The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was already installed in the system, it will not attempt to re-configure the network. In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have the 3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it. Regards, Moti On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
Moti, Thanks for the info. In my case, the engine host is different from the virtualization host (where the VMs run). Should the virtualization host also have the 3.6 repo, just like the engine host? Thanks, Paul On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com> wrote:
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was already installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have the 3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
Hi, this a late reply. When I look through the repo you listed, I only see vdsm rpm in the ovirt-3.5 area for el6.6. Has there been no vdsm changes for ovirt-3.6? Paul On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com> wrote:
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was already installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have the 3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
+Eyal and Sandro Could you list the exact repo ([1] ?) which should be configured on the host for 3.6 cluster support ? [1] http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm On Fri, Mar 11, 2016 at 11:50 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
this a late reply. When I look through the repo you listed, I only see vdsm rpm in the ovirt-3.5 area for el6.6.
Has there been no vdsm changes for ovirt-3.6?
Paul
On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com> wrote:
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was already installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have the 3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Regards, Moti
On Sun, Mar 13, 2016 at 12:00 PM, Moti Asayag <masayag@redhat.com> wrote:
+Eyal and Sandro
Could you list the exact repo ([1] ?) which should be configured on the host for 3.6 cluster support ?
[1] http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
On Fri, Mar 11, 2016 at 11:50 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
this a late reply. When I look through the repo you listed, I only see vdsm rpm in the ovirt-3.5 area for el6.6.
Has there been no vdsm changes for ovirt-3.6?
3.6 does not support el6 hosts and does not ship RPMs for el6. A 3.6 engine can still manage existing 3.5/el6 hosts at 3.5 compatibility level. To upgrade hosts to 3.6, you'll need to reinstall them with el7. Best,
Paul
On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com> wrote:
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was already installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have the 3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall only install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Regards, Moti
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Didi
On Sun, Mar 13, 2016 at 10:22 AM, Yedidyah Bar David <didi@redhat.com> wrote:
On Sun, Mar 13, 2016 at 12:00 PM, Moti Asayag <masayag@redhat.com> wrote:
+Eyal and Sandro
Could you list the exact repo ([1] ?) which should be configured on the host for 3.6 cluster support ?
[1] http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
On Fri, Mar 11, 2016 at 11:50 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
this a late reply. When I look through the repo you listed, I only see vdsm rpm in the ovirt-3.5 area for el6.6.
Has there been no vdsm changes for ovirt-3.6?
3.6 does not support el6 hosts and does not ship RPMs for el6.
A 3.6 engine can still manage existing 3.5/el6 hosts at 3.5 compatibility level.
To upgrade hosts to 3.6, you'll need to reinstall them with el7.
Indeed. The repos for vdsm 3.6 (el7 only) can be found here: http://resources.ovirt.org/pub/ovirt-3.6/rpm/el7
Best,
Paul
On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com>
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was
already
installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have
wrote: the
3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall
only
install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Regards, Moti
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Didi
-- Eyal Edri Associate Manager EMEA ENG Virtualization R&D Red Hat Israel phone: +972-9-7692018 irc: eedri (on #tlv #rhev-dev #rhev-integ)
Thanks all for the info. This explains why I am having so many issues. I will upgrade to el7 shortly. Thanks, Paul On Sun, Mar 13, 2016 at 5:22 AM, Yedidyah Bar David <didi@redhat.com> wrote:
On Sun, Mar 13, 2016 at 12:00 PM, Moti Asayag <masayag@redhat.com> wrote:
+Eyal and Sandro
Could you list the exact repo ([1] ?) which should be configured on the host for 3.6 cluster support ?
[1] http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
On Fri, Mar 11, 2016 at 11:50 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
this a late reply. When I look through the repo you listed, I only see vdsm rpm in the ovirt-3.5 area for el6.6.
Has there been no vdsm changes for ovirt-3.6?
3.6 does not support el6 hosts and does not ship RPMs for el6.
A 3.6 engine can still manage existing 3.5/el6 hosts at 3.5 compatibility level.
To upgrade hosts to 3.6, you'll need to reinstall them with el7.
Best,
Paul
On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com>
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was
already
installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have
wrote: the
3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall
only
install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Regards, Moti
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Didi _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
Thanks all. I was able to install RHEL 7.2 on the virtualization host Friday. ovirt 3.6.3 now works as expected. The VM console works again for spice/rdesktop clients. Thanks, Paul On Sun, Mar 13, 2016 at 10:26 AM, Paul Dyer <pmdyermms@gmail.com> wrote:
Thanks all for the info. This explains why I am having so many issues. I will upgrade to el7 shortly.
Thanks, Paul
On Sun, Mar 13, 2016 at 5:22 AM, Yedidyah Bar David <didi@redhat.com> wrote:
On Sun, Mar 13, 2016 at 12:00 PM, Moti Asayag <masayag@redhat.com> wrote:
+Eyal and Sandro
Could you list the exact repo ([1] ?) which should be configured on the host for 3.6 cluster support ?
[1] http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
On Fri, Mar 11, 2016 at 11:50 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
this a late reply. When I look through the repo you listed, I only
see
vdsm rpm in the ovirt-3.5 area for el6.6.
Has there been no vdsm changes for ovirt-3.6?
3.6 does not support el6 hosts and does not ship RPMs for el6.
A 3.6 engine can still manage existing 3.5/el6 hosts at 3.5 compatibility level.
To upgrade hosts to 3.6, you'll need to reinstall them with el7.
Best,
Paul
On Sun, Feb 21, 2016 at 12:32 PM, Moti Asayag <masayag@redhat.com>
Hi Paul,
The 'reinstall' will attempt to install the latest version of vdsm, it will enroll certificates for the host and more, but if the host was
already
installed in the system, it will not attempt to re-configure the network.
In your case, there seems to be a mismatch between the repositories (of yum) configured on the host to the cluster level. In order to support the host within 3.6 cluster, the host should have
wrote: the
3.6 repo configured (http://resources.ovirt.org/pub/yum-repo/) Then 'reinstall' will update the latest version of 'vdsm' and will configure it.
Regards, Moti
On Sat, Feb 20, 2016 at 6:01 PM, Paul Dyer <pmdyermms@gmail.com> wrote:
Hi,
can anyone explain what this button does? I have looked in the documentation but have found no reference to it. Will reinstall
only
install packages and setting for the host, and leave cluster/storage/networks alone?
I have a cluster version 3.6.2 that will not Activate the host because the message "Host .. is compatible with versions (3.0,3.1,3.2,3.3,3.4,3.5) and cannot join Cluster...". The host was part of a 3.5 cluster until the upgrade to 3.6.2.
Thanks a million,
Paul
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Regards, Moti
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Regards, Moti
_______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Didi _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
-- Paul Dyer, Mercury Consulting Group, RHCE 504-302-8750
participants (5)
-
Eyal Edri -
Michal Skrivanek -
Moti Asayag -
Paul Dyer -
Yedidyah Bar David