[Engine-devel] Updating ovirt engine from 3.0 to the 3.1.0 version
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]# -- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? 2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) 3. Any error in the httpd log? 4. What happens if you stop iptables and access your server with :8080? Thanks, Ofer ----- Original Message -----
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown?
And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1
[root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64
Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below.
------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes
oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes
Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ]
**** Installation completed successfully ******
(Please allow oVirt Engine a few moments to start up.....)
Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]#
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
_______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
On 2012-4-29 19:33, Ofer Schreiber wrote:
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade?
Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed.
2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log
01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) .... at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined
3. Any error in the httpd log?
[root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]#
4. What happens if you stop iptables and access your server with :8080?
The same as before.
Thanks, Ofer
----- Original Message -----
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown?
And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1
[root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64
Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below.
------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes
oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes
Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ]
**** Installation completed successfully ******
(Please allow oVirt Engine a few moments to start up.....)
Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]#
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
_______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
Looks like something went wrong with the .ear deployment. (already saw such an issue in http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html) Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again ----- Original Message -----
On 2012-4-29 19:33, Ofer Schreiber wrote:
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade?
Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed.
2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log
01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) ....
at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:]
01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined
3. Any error in the httpd log?
[root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]#
[root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]#
4. What happens if you stop iptables and access your server with :8080?
The same as before.
Thanks, Ofer
----- Original Message -----
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown?
And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1
[root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64
Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below.
------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes
oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes
Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ]
**** Installation completed successfully ******
(Please allow oVirt Engine a few moments to start up.....)
Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]#
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
_______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
This is a multi-part message in MIME format. --------------000504050209020707080108 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions. However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered. HTTP Status 404 - /webadmin ------------------------------------------------------------------------ *type* Status report *message* _/webadmin_ *description* _The requested resource (/webadmin) is not available._ ------------------------------------------------------------------------ JBoss Web/7.0.3.Final On 2012-4-30 15:22, Ofer Schreiber wrote:
Looks like something went wrong with the .ear deployment. (already saw such an issue in http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html)
Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again
----- Original Message -----
On 2012-4-29 19:33, Ofer Schreiber wrote:
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed.
2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log
01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) ....
at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:]
01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined
3. Any error in the httpd log?
[root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]#
[root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]#
4. What happens if you stop iptables and access your server with :8080? The same as before.
Thanks, Ofer
----- Original Message -----
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown?
And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1
[root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64
Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below.
------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes
oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes
Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ]
**** Installation completed successfully ******
(Please allow oVirt Engine a few moments to start up.....)
Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]#
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
_______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory --------------000504050209020707080108 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.<br> <br> However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.<br> <br> <h1>HTTP Status 404 - /webadmin</h1> <hr noshade="noshade" size="1"> <p><b>type</b> Status report</p> <p><b>message</b> <u>/webadmin</u></p> <p><b>description</b> <u>The requested resource (/webadmin) is not available.</u></p> <hr noshade="noshade" size="1"> <h3>JBoss Web/7.0.3.Final</h3> <br> <br> On 2012-4-30 15:22, Ofer Schreiber wrote: <blockquote cite="mid:8faf07bc-015d-439d-b403-8d3d216b58ad@zmail14.collab.prod.int.phx2.redhat.com" type="cite"> <pre wrap="">Looks like something went wrong with the .ear deployment. (already saw such an issue in <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html">http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html</a>) Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 2012-4-29 19:33, Ofer Schreiber wrote: </pre> <blockquote type="cite"> <pre wrap="">I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? </pre> </blockquote> <pre wrap=""> Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. </pre> <blockquote type="cite"> <pre wrap="">2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) .... at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined </pre> <blockquote type="cite"> <pre wrap="">3. Any error in the httpd log? </pre> </blockquote> <pre wrap=""> [root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# </pre> <blockquote type="cite"> <pre wrap="">4. What happens if you stop iptables and access your server with :8080? </pre> </blockquote> <pre wrap=""> The same as before. </pre> <blockquote type="cite"> <pre wrap=""> Thanks, Ofer ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL <a class="moz-txt-link-rfc2396E" href="http://ovirt-engine-112:80">"http://ovirt-engine-112:80"</a>, the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: <a class="moz-txt-link-freetext" href="http://ovirt-engine-112:80">http://ovirt-engine-112:80</a> [root@ovirt-engine-112 ~]# -- Shu Ming<a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory _______________________________________________ Engine-devel mailing list <a class="moz-txt-link-abbreviated" href="mailto:Engine-devel@ovirt.org">Engine-devel@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/engine-devel">http://lists.ovirt.org/mailman/listinfo/engine-devel</a> </pre> </blockquote> </blockquote> <pre wrap=""> -- Shu Ming<a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory </pre> </blockquote> <pre wrap=""> </pre> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </body> </html> --------------000504050209020707080108--
--Apple-Mail-800C3F95-1F6D-4034-9419-DEFEA898FB04 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii Please re create the link to engine.ear.=20 That's the base java code that contains webadmin.=20 If it doesn't deploy, create also engine.ear.dodeploy Ofer.=20 On 30 Apr 2012, at 19:23, Shu Ming <shuming@linux.vnet.ibm.com> wrote:
After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standa= lone/deployments, I can access the page now. Thanks for you suggestions. =20 However, when I tried to access "Administrator Portal(no SSL)". The foll= owing errors were encountered. =20 HTTP Status 404 - /webadmin =20 type Status report =20 message /webadmin =20 description The requested resource (/webadmin) is not available. =20 JBoss Web/7.0.3.Final =20 =20 =20 On 2012-4-30 15:22, Ofer Schreiber wrote:
=20 Looks like something went wrong with the .ear deployment. (already saw su= ch an issue in http://lists.ovirt.org/pipermail/engine-devel/2012-January/00= 0483.html) =20 Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again =20 ----- Original Message -----
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. =20 2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log =20 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment
On 2012-4-29 19:33, Ofer Schreiber wrote: directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" =3D> "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" =3D> "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContex= tImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationCon= textImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAd= dHandler.java:170) .... =20 at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.acc= ess$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run= (ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.jav= a:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.ja= va:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] =20 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" =3D> {"Operation step-1" =3D> "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" =3D> \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined =20 =20 =20
3. Any error in the httpd log? =20 [root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# =20 [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# =20 =20 =20 4. What happens if you stop iptables and access your server with :8080? The same as before. =20 Thanks, Ofer =20 ----- Original Message -----
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL "http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? =20 =20 And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 =20 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 =20 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. =20 ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes =20 oVirt Engine will be installed using the following configuration: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes =20 Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] =20 **** Installation completed successfully ****** =20 (Please allow oVirt Engine a few moments to start up.....) =20 =20 Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]# =20 =20 -- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory =20 =20 _______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel =20 =20 -- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory =20 =20 =20 =20 =20 --=20 Shu Ming <shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
--Apple-Mail-800C3F95-1F6D-4034-9419-DEFEA898FB04 Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=utf-8 <html><head></head><body bgcolor="#FFFFFF"><div><div style="text-align: left;direction: ltr; ">Please re create the link to engine.ear. </div><div style="text-align: left;direction: ltr; ">That's the base java code that contains webadmin. </div><div style="text-align: left;direction: ltr; "><br></div><div style="text-align: left;direction: ltr; ">If it doesn't deploy, create also engine.ear.dodeploy</div><div style="text-align: left;direction: ltr; "><br></div><div style="text-align: left;direction: ltr; ">Ofer. </div><br><div style="direction: rtl;"><br></div></div><div><br>On 30 Apr 2012, at 19:23, Shu Ming <<a href="mailto:shuming@linux.vnet.ibm.com">shuming@linux.vnet.ibm.com</a>> wrote:<br><br></div><div></div><blockquote type="cite"><div> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.<br> <br> However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.<br> <br> <h1>HTTP Status 404 - /webadmin</h1> <hr noshade="noshade" size="1"> <p><b>type</b> Status report</p> <p><b>message</b> <u>/webadmin</u></p> <p><b>description</b> <u>The requested resource (/webadmin) is not available.</u></p> <hr noshade="noshade" size="1"> <h3>JBoss Web/7.0.3.Final</h3> <br> <br> On 2012-4-30 15:22, Ofer Schreiber wrote: <blockquote cite="mid:8faf07bc-015d-439d-b403-8d3d216b58ad@zmail14.collab.prod.int.phx2.redhat.com" type="cite"> <pre wrap="">Looks like something went wrong with the .ear deployment. (already saw such an issue in <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html">http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html</a>) Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 2012-4-29 19:33, Ofer Schreiber wrote: </pre> <blockquote type="cite"> <pre wrap="">I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? </pre> </blockquote> <pre wrap="">Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. </pre> <blockquote type="cite"> <pre wrap="">2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) .... at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined </pre> <blockquote type="cite"> <pre wrap="">3. Any error in the httpd log? </pre> </blockquote> <pre wrap=""> [root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# </pre> <blockquote type="cite"> <pre wrap="">4. What happens if you stop iptables and access your server with :8080? </pre> </blockquote> <pre wrap="">The same as before. </pre> <blockquote type="cite"> <pre wrap="">Thanks, Ofer ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL <a class="moz-txt-link-rfc2396E" href="http://ovirt-engine-112:80">"http://ovirt-engine-112:80"</a>, the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: <a class="moz-txt-link-freetext" href="http://ovirt-engine-112:80">http://ovirt-engine-112:80</a> [root@ovirt-engine-112 ~]# -- Shu Ming<a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory _______________________________________________ Engine-devel mailing list <a class="moz-txt-link-abbreviated" href="mailto:Engine-devel@ovirt.org">Engine-devel@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/engine-devel">http://lists.ovirt.org/mailman/listinfo/engine-devel</a> </pre> </blockquote> </blockquote> <pre wrap=""> -- Shu Ming<a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory </pre> </blockquote> <pre wrap=""></pre> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </div></blockquote></body></html> --Apple-Mail-800C3F95-1F6D-4034-9419-DEFEA898FB04--
This is a multi-part message in MIME format. --------------050009010602010202060207 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Oops. Actually, I deleted the engine.ear.failed and engine.ear was there untouched. Her is the directory hierarchy now in jboss deployment directory. [root@ovirt-engine-112 deployments]# pwd /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments [root@ovirt-engine-112 deployments]# ls -l total 16 lrwxrwxrwx. 1 root root 34 Apr 28 01:14 engine.ear -> /usr/share/ovirt-engine/engine.ear -rw-r--r--. 1 jboss-as jboss-as 8868 Dec 2 05:10 README.txt lrwxrwxrwx. 1 root root 48 Apr 28 01:14 ROOT.war -> /usr/share/ovirt-engine/resources/jboss/ROOT.war -rw-rw-r--. 1 jboss-as jboss-as 8 Apr 28 01:14 ROOT.war.deployed [root@ovirt-engine-112 deployments]# On 2012-5-1 4:11, Ofer Schreiber wrote:
Please re create the link to engine.ear. That's the base java code that contains webadmin.
If it doesn't deploy, create also engine.ear.dodeploy
Ofer.
On 30 Apr 2012, at 19:23, Shu Ming <shuming@linux.vnet.ibm.com <mailto:shuming@linux.vnet.ibm.com>> wrote:
After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.
However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.
HTTP Status 404 - /webadmin
------------------------------------------------------------------------
*type* Status report
*message* _/webadmin_
*description* _The requested resource (/webadmin) is not available._
------------------------------------------------------------------------
JBoss Web/7.0.3.Final
On 2012-4-30 15:22, Ofer Schreiber wrote:
Looks like something went wrong with the .ear deployment. (already saw such an issue inhttp://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html)
Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again
----- Original Message -----
On 2012-4-29 19:33, Ofer Schreiber wrote:
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed.
2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log
01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) ....
at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:]
01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined
3. Any error in the httpd log? [root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]#
[root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]#
4. What happens if you stop iptables and access your server with :8080? The same as before.
Thanks, Ofer
----- Original Message -----
Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL"http://ovirt-engine-112:80", the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown?
And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1
[root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64
Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below.
------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes
oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes
Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ]
**** Installation completed successfully ******
(Please allow oVirt Engine a few moments to start up.....)
Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: http://ovirt-engine-112:80 [root@ovirt-engine-112 ~]#
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
_______________________________________________ Engine-devel mailing list Engine-devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory --------------050009010602010202060207 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> Oops. Actually, I deleted the engine.ear.failed and engine.ear was there untouched.<br> Her is the directory hierarchy now in jboss deployment directory.<br> <br> [root@ovirt-engine-112 deployments]# pwd<br> /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments<br> [root@ovirt-engine-112 deployments]# ls -l<br> total 16<br> lrwxrwxrwx. 1 root root 34 Apr 28 01:14 engine.ear -> /usr/share/ovirt-engine/engine.ear<br> -rw-r--r--. 1 jboss-as jboss-as 8868 Dec 2 05:10 README.txt<br> lrwxrwxrwx. 1 root root 48 Apr 28 01:14 ROOT.war -> /usr/share/ovirt-engine/resources/jboss/ROOT.war<br> -rw-rw-r--. 1 jboss-as jboss-as 8 Apr 28 01:14 ROOT.war.deployed<br> [root@ovirt-engine-112 deployments]#<br> <br> <br> <br> On 2012-5-1 4:11, Ofer Schreiber wrote: <blockquote cite="mid:36C82119-0445-49AD-98E2-B6A240E73D2F@redhat.com" type="cite"> <div> <div style="text-align: left;direction: ltr; ">Please re create the link to engine.ear. </div> <div style="text-align: left;direction: ltr; ">That's the base java code that contains webadmin. </div> <div style="text-align: left;direction: ltr; "><br> </div> <div style="text-align: left;direction: ltr; ">If it doesn't deploy, create also engine.ear.dodeploy</div> <div style="text-align: left;direction: ltr; "><br> </div> <div style="text-align: left;direction: ltr; ">Ofer. </div> <br> <div style="direction: rtl;"><br> </div> </div> <div><br> On 30 Apr 2012, at 19:23, Shu Ming <<a moz-do-not-send="true" href="mailto:shuming@linux.vnet.ibm.com">shuming@linux.vnet.ibm.com</a>> wrote:<br> <br> </div> <blockquote type="cite"> <div> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.<br> <br> However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.<br> <br> <h1>HTTP Status 404 - /webadmin</h1> <hr noshade="noshade" size="1"> <p><b>type</b> Status report</p> <p><b>message</b> <u>/webadmin</u></p> <p><b>description</b> <u>The requested resource (/webadmin) is not available.</u></p> <hr noshade="noshade" size="1"> <h3>JBoss Web/7.0.3.Final</h3> <br> <br> On 2012-4-30 15:22, Ofer Schreiber wrote: <blockquote cite="mid:8faf07bc-015d-439d-b403-8d3d216b58ad@zmail14.collab.prod.int.phx2.redhat.com" type="cite"> <pre wrap="">Looks like something went wrong with the .ear deployment. (already saw such an issue in <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html">http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html</a>) Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 2012-4-29 19:33, Ofer Schreiber wrote: </pre> <blockquote type="cite"> <pre wrap="">I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? </pre> </blockquote> <pre wrap="">Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. </pre> <blockquote type="cite"> <pre wrap="">2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) .... at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined </pre> <blockquote type="cite"> <pre wrap="">3. Any error in the httpd log? </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# </pre> <blockquote type="cite"> <pre wrap="">4. What happens if you stop iptables and access your server with :8080? </pre> </blockquote> <pre wrap="">The same as before. </pre> <blockquote type="cite"> <pre wrap="">Thanks, Ofer ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="http://ovirt-engine-112:80">"http://ovirt-engine-112:80"</a>, the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://ovirt-engine-112:80">http://ovirt-engine-112:80</a> [root@ovirt-engine-112 ~]# -- Shu Ming<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory _______________________________________________ Engine-devel mailing list <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Engine-devel@ovirt.org">Engine-devel@ovirt.org</a> <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/engine-devel">http://lists.ovirt.org/mailman/listinfo/engine-devel</a> </pre> </blockquote> </blockquote> <pre wrap="">-- Shu Ming<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory </pre> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </div> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </body> </html> --------------050009010602010202060207--
--Apple-Mail-7635C271-F7DB-46F9-AFD1-AF389FE85986 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii What about creating the engine.ear.dodeploy file as suggested earlier? On 1 May 2012, at 18:15, Shu Ming <shuming@linux.vnet.ibm.com> wrote:
Oops. Actually, I deleted the engine.ear.failed and engine.ear was there u= ntouched. Her is the directory hierarchy now in jboss deployment directory. =20 [root@ovirt-engine-112 deployments]# pwd /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments [root@ovirt-engine-112 deployments]# ls -l total 16 lrwxrwxrwx. 1 root root 34 Apr 28 01:14 engine.ear -> /usr/share= /ovirt-engine/engine.ear -rw-r--r--. 1 jboss-as jboss-as 8868 Dec 2 05:10 README.txt lrwxrwxrwx. 1 root root 48 Apr 28 01:14 ROOT.war -> /usr/share/o= virt-engine/resources/jboss/ROOT.war -rw-rw-r--. 1 jboss-as jboss-as 8 Apr 28 01:14 ROOT.war.deployed [root@ovirt-engine-112 deployments]# =20 =20 =20 On 2012-5-1 4:11, Ofer Schreiber wrote:
=20 Please re create the link to engine.ear.=20 That's the base java code that contains webadmin.=20 =20 If it doesn't deploy, create also engine.ear.dodeploy =20 Ofer.=20 =20 =20 =20 On 30 Apr 2012, at 19:23, Shu Ming <shuming@linux.vnet.ibm.com> wrote: =20
After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/stan= dalone/deployments, I can access the page now. Thanks for you suggestions. =20 However, when I tried to access "Administrator Portal(no SSL)= ". The following errors were encountered. =20 HTTP Status 404 - /webadmin =20 type Status report =20 message /webadmin =20 description The requested resource (/webadmin) is not available. =20 JBoss Web/7.0.3.Final =20 =20 =20 On 2012-4-30 15:22, Ofer Schreiber wrote:
=20 Looks like something went wrong with the .ear deployment. (already saw s= uch an issue in http://lists.ovirt.org/pipermail/engine-devel/2012-January/0= 00483.html) =20 Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again =20 ----- Original Message -----
I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. =20 2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log =20 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment
On 2012-4-29 19:33, Ofer Schreiber wrote: directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" =3D> "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" =3D> "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationCont= extImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationC= ontextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(Deployment= AddHandler.java:170) .... =20 at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.a= ccess$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.r= un(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.j= ava:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.= java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] =20 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" =3D> {"Operation step-1" =3D>=
"JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" =3D> \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined =20 =20 =20
3. Any error in the httpd log? [root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# =20 [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# =20 =20 =20 4. What happens if you stop iptables and access your server with :8080? The same as before. =20 Thanks, Ofer =20 ----- Original Message ----- > Hi, > I built a set of ovirt engine RPM packages from near the > latest > ovirt > engine source code. However, when I try to access the engine > server > with URL "http://ovirt-engine-112:80", the browser displayed a > blank > page without http error returned. Any clue about what is going on > here? > Why didn't the engine administrator home page be shown? >=20 >=20 > And the packages were also installed successfully in my target > system, > checked this by "rpm -q -a|grep engine". > I) upgraded the packages to the 3.1 >=20 > [root@ovirt-engine-112 ~]# rpm -q -a |grep engine > ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 > ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-jbossas-1.2-2.fc16.x86_64 > ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 > gtk2-engines-2.20.2-2.fc15.x86_64 >=20 > Step II) > Then I used "engine-setup" to setup the engine. It seems > that > everything is ok, see the log below. >=20 > ------------- > [root@ovirt-engine-112 ~]# engine-setup > Welcome to oVirt Engine setup utility > HTTP Port [80] : > HTTPS Port [443] : > Host fully qualified domain name, note that this name should be > fully > resolvable [ovirt-engine-112] : > ERROR: domain is not a valid domain name > User input failed validation, do you still wish to use it? > (yes|no): > yes > Password for Administrator (admin@internal) : > Warning: Weak Password. > Confirm password : > Organization Name for the Certificate: cstl > The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] > [NFS] : > Enter DB type for installation ['remote'| 'local'] [local] : > Local database password : > Warning: Weak Password. > Confirm password : > Should the installer configure NFS share on this server to be used > as > an > ISO Domain? ['yes'| 'no'] [yes] : > Mount point path: /iso-dom > ERROR: mount point already exists in /etc/exports > Mount point path: /iso-dom > Display name for the ISO Domain: iso-domains > Firewall ports need to be opened. > You can let the installer configure iptables automatically > overriding > the current configuration. The old configuration will be backed > up. > Alternately you can configure the firewall later using an example > iptables file found under > /usr/share/ovirt-engine/conf/iptables.example > Configure iptables ? ['yes'| 'no']: yes >=20 > oVirt Engine will be installed using the following configuration: > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > http-port: 80 > https-port: 443 > host-fqdn: ovirt-engine-112 > auth-pass: ******** > org-name: cstl > default-dc-type: NFS > db-remote-install: local > db-local-pass: ******** > nfs-mp: /iso-dom > iso-domain-name: iso-domains > config-nfs: yes > override-iptables: yes > Proceed with the configuration listed above? (yes|no): yes >=20 > Installing: > Configuring oVirt-engine... [ DONE ] > Creating CA... [ DONE ] > Editing JBoss Configuration... [ DONE ] > Setting Database Configuration... [ DONE ] > Setting Database Security... [ DONE ] > Creating Database... [ DONE ] > Updating the Default Data Center Storage Type... [ DONE ] > Editing oVirt Engine Configuration... [ DONE ] > Editing Postgresql Configuration... [ DONE ] > Configuring the Default ISO Domain... [ DONE ] > Configuring Firewall (iptables)... [ DONE ] > Starting JBoss Service... [ DONE ] > Handling HTTPD... [ DONE ] >=20 > **** Installation completed successfully ****** >=20 > (Please allow oVirt Engine a few moments to start up.....) >=20 >=20 > Additional information: > * SSL Certificate fingerprint: > C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF > * SSH Public key fingerprint: > 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 > * A default ISO share has been created on this host. > If IP based access restrictions are required, please edit > /iso-dom > entry in /etc/exports > * The firewall has been updated, the old iptables configuration > file > was saved to > /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 > * The installation log file is available at: > /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log > * Please use the user "admin" and password specified in order > to > login > into oVirt Engine > * To configure additional users, first configure authentication > domains using the 'engine-manage-domains' utility > * To access oVirt Engine please go to the following URL: > http://ovirt-engine-112:80 > [root@ovirt-engine-112 ~]# >=20 >=20 > -- > Shu Ming<shuming@linux.vnet.ibm.com> > IBM China Systems and Technology Laboratory >=20 >=20 > _______________________________________________ > Engine-devel mailing list > Engine-devel@ovirt.org > http://lists.ovirt.org/mailman/listinfo/engine-devel >=20 -- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory =20 =20 =20 =20 =20 --=20 Shu Ming <shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory =20 =20 --=20 Shu Ming <shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
--Apple-Mail-7635C271-F7DB-46F9-AFD1-AF389FE85986 Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=utf-8 <html><head></head><body bgcolor="#FFFFFF"><div><div style="text-align: left;direction: ltr; ">What about creating the engine.ear.dodeploy file as suggested earlier?</div><br><div style="direction: rtl;"><br></div></div><div><br>On 1 May 2012, at 18:15, Shu Ming <<a href="mailto:shuming@linux.vnet.ibm.com">shuming@linux.vnet.ibm.com</a>> wrote:<br><br></div><div></div><blockquote type="cite"><div> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> Oops. Actually, I deleted the engine.ear.failed and engine.ear was there untouched.<br> Her is the directory hierarchy now in jboss deployment directory.<br> <br> [root@ovirt-engine-112 deployments]# pwd<br> /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments<br> [root@ovirt-engine-112 deployments]# ls -l<br> total 16<br> lrwxrwxrwx. 1 root root 34 Apr 28 01:14 engine.ear -> /usr/share/ovirt-engine/engine.ear<br> -rw-r--r--. 1 jboss-as jboss-as 8868 Dec 2 05:10 README.txt<br> lrwxrwxrwx. 1 root root 48 Apr 28 01:14 ROOT.war -> /usr/share/ovirt-engine/resources/jboss/ROOT.war<br> -rw-rw-r--. 1 jboss-as jboss-as 8 Apr 28 01:14 ROOT.war.deployed<br> [root@ovirt-engine-112 deployments]#<br> <br> <br> <br> On 2012-5-1 4:11, Ofer Schreiber wrote: <blockquote cite="mid:36C82119-0445-49AD-98E2-B6A240E73D2F@redhat.com" type="cite"> <div> <div style="text-align: left;direction: ltr; ">Please re create the link to engine.ear. </div> <div style="text-align: left;direction: ltr; ">That's the base java code that contains webadmin. </div> <div style="text-align: left;direction: ltr; "><br> </div> <div style="text-align: left;direction: ltr; ">If it doesn't deploy, create also engine.ear.dodeploy</div> <div style="text-align: left;direction: ltr; "><br> </div> <div style="text-align: left;direction: ltr; ">Ofer. </div> <br> <div style="direction: rtl;"><br> </div> </div> <div><br> On 30 Apr 2012, at 19:23, Shu Ming <<a moz-do-not-send="true" href="mailto:shuming@linux.vnet.ibm.com">shuming@linux.vnet.ibm.com</a>> wrote:<br> <br> </div> <blockquote type="cite"> <div> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.<br> <br> However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.<br> <br> <h1>HTTP Status 404 - /webadmin</h1> <hr noshade="noshade" size="1"> <p><b>type</b> Status report</p> <p><b>message</b> <u>/webadmin</u></p> <p><b>description</b> <u>The requested resource (/webadmin) is not available.</u></p> <hr noshade="noshade" size="1"> <h3>JBoss Web/7.0.3.Final</h3> <br> <br> On 2012-4-30 15:22, Ofer Schreiber wrote: <blockquote cite="mid:8faf07bc-015d-439d-b403-8d3d216b58ad@zmail14.collab.prod.int.phx2.redhat.com" type="cite"> <pre wrap="">Looks like something went wrong with the .ear deployment. (already saw such an issue in <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html">http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html</a>) Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 2012-4-29 19:33, Ofer Schreiber wrote: </pre> <blockquote type="cite"> <pre wrap="">I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? </pre> </blockquote> <pre wrap="">Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. </pre> <blockquote type="cite"> <pre wrap="">2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) .... at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined </pre> <blockquote type="cite"> <pre wrap="">3. Any error in the httpd log? </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# </pre> <blockquote type="cite"> <pre wrap="">4. What happens if you stop iptables and access your server with :8080? </pre> </blockquote> <pre wrap="">The same as before. </pre> <blockquote type="cite"> <pre wrap="">Thanks, Ofer ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="http://ovirt-engine-112:80">"http://ovirt-engine-112:80"</a>, the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://ovirt-engine-112:80">http://ovirt-engine-112:80</a> [root@ovirt-engine-112 ~]# -- Shu Ming<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory _______________________________________________ Engine-devel mailing list <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Engine-devel@ovirt.org">Engine-devel@ovirt.org</a> <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/engine-devel">http://lists.ovirt.org/mailman/listinfo/engine-devel</a> </pre> </blockquote> </blockquote> <pre wrap="">-- Shu Ming<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory </pre> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </div> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </div></blockquote></body></html> --Apple-Mail-7635C271-F7DB-46F9-AFD1-AF389FE85986--
This is a multi-part message in MIME format. --------------020708010003090106050701 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit After "touch engine.ear.doreply" in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, ovirt engine can be accessed now. Thanks for your support. On 2012-5-2 0:50, Ofer Schreiber wrote:
What about creating the engine.ear.dodeploy file as suggested earlier?
On 1 May 2012, at 18:15, Shu Ming <shuming@linux.vnet.ibm.com <mailto:shuming@linux.vnet.ibm.com>> wrote:
Oops. Actually, I deleted the engine.ear.failed and engine.ear was there untouched. Her is the directory hierarchy now in jboss deployment directory.
[root@ovirt-engine-112 deployments]# pwd /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments [root@ovirt-engine-112 deployments]# ls -l total 16 lrwxrwxrwx. 1 root root 34 Apr 28 01:14 engine.ear -> /usr/share/ovirt-engine/engine.ear -rw-r--r--. 1 jboss-as jboss-as 8868 Dec 2 05:10 README.txt lrwxrwxrwx. 1 root root 48 Apr 28 01:14 ROOT.war -> /usr/share/ovirt-engine/resources/jboss/ROOT.war -rw-rw-r--. 1 jboss-as jboss-as 8 Apr 28 01:14 ROOT.war.deployed [root@ovirt-engine-112 deployments]#
On 2012-5-1 4:11, Ofer Schreiber wrote:
Please re create the link to engine.ear. That's the base java code that contains webadmin.
If it doesn't deploy, create also engine.ear.dodeploy
Ofer.
On 30 Apr 2012, at 19:23, Shu Ming <shuming@linux.vnet.ibm.com <mailto:shuming@linux.vnet.ibm.com>> wrote:
After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.
However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.
HTTP Status 404 - /webadmin
------------------------------------------------------------------------
*type* Status report
*message* _/webadmin_
*description* _The requested resource (/webadmin) is not available._
------------------------------------------------------------------------
JBoss Web/7.0.3.Final
On 2012-4-30 15:22, Ofer Schreiber wrote:
Looks like something went wrong with the .ear deployment. (already saw such an issue inhttp://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html)
Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again
----- Original Message -----
On 2012-4-29 19:33, Ofer Schreiber wrote: > I need more info about this: > 1. It looks like a clean install (DB created from scratch). why do > you call it an upgrade? Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed.
> 2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as > and /var/log/ovirt-engine usually) [root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log
01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) ....
at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:]
01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined
> 3. Any error in the httpd log? [root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]#
[root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]#
> 4. What happens if you stop iptables and access your server with > :8080? The same as before.
> Thanks, > Ofer > > ----- Original Message ----- >> Hi, >> I built a set of ovirt engine RPM packages from near the >> latest >> ovirt >> engine source code. However, when I try to access the engine >> server >> with URL"http://ovirt-engine-112:80", the browser displayed a >> blank >> page without http error returned. Any clue about what is going on >> here? >> Why didn't the engine administrator home page be shown? >> >> >> And the packages were also installed successfully in my target >> system, >> checked this by "rpm -q -a|grep engine". >> I) upgraded the packages to the 3.1 >> >> [root@ovirt-engine-112 ~]# rpm -q -a |grep engine >> ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 >> ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-jbossas-1.2-2.fc16.x86_64 >> ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 >> ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 >> gtk2-engines-2.20.2-2.fc15.x86_64 >> >> Step II) >> Then I used "engine-setup" to setup the engine. It seems >> that >> everything is ok, see the log below. >> >> ------------- >> [root@ovirt-engine-112 ~]# engine-setup >> Welcome to oVirt Engine setup utility >> HTTP Port [80] : >> HTTPS Port [443] : >> Host fully qualified domain name, note that this name should be >> fully >> resolvable [ovirt-engine-112] : >> ERROR: domain is not a valid domain name >> User input failed validation, do you still wish to use it? >> (yes|no): >> yes >> Password for Administrator (admin@internal) : >> Warning: Weak Password. >> Confirm password : >> Organization Name for the Certificate: cstl >> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] >> [NFS] : >> Enter DB type for installation ['remote'| 'local'] [local] : >> Local database password : >> Warning: Weak Password. >> Confirm password : >> Should the installer configure NFS share on this server to be used >> as >> an >> ISO Domain? ['yes'| 'no'] [yes] : >> Mount point path: /iso-dom >> ERROR: mount point already exists in /etc/exports >> Mount point path: /iso-dom >> Display name for the ISO Domain: iso-domains >> Firewall ports need to be opened. >> You can let the installer configure iptables automatically >> overriding >> the current configuration. The old configuration will be backed >> up. >> Alternately you can configure the firewall later using an example >> iptables file found under >> /usr/share/ovirt-engine/conf/iptables.example >> Configure iptables ? ['yes'| 'no']: yes >> >> oVirt Engine will be installed using the following configuration: >> ================================================================= >> http-port: 80 >> https-port: 443 >> host-fqdn: ovirt-engine-112 >> auth-pass: ******** >> org-name: cstl >> default-dc-type: NFS >> db-remote-install: local >> db-local-pass: ******** >> nfs-mp: /iso-dom >> iso-domain-name: iso-domains >> config-nfs: yes >> override-iptables: yes >> Proceed with the configuration listed above? (yes|no): yes >> >> Installing: >> Configuring oVirt-engine... [ DONE ] >> Creating CA... [ DONE ] >> Editing JBoss Configuration... [ DONE ] >> Setting Database Configuration... [ DONE ] >> Setting Database Security... [ DONE ] >> Creating Database... [ DONE ] >> Updating the Default Data Center Storage Type... [ DONE ] >> Editing oVirt Engine Configuration... [ DONE ] >> Editing Postgresql Configuration... [ DONE ] >> Configuring the Default ISO Domain... [ DONE ] >> Configuring Firewall (iptables)... [ DONE ] >> Starting JBoss Service... [ DONE ] >> Handling HTTPD... [ DONE ] >> >> **** Installation completed successfully ****** >> >> (Please allow oVirt Engine a few moments to start up.....) >> >> >> Additional information: >> * SSL Certificate fingerprint: >> C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF >> * SSH Public key fingerprint: >> 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 >> * A default ISO share has been created on this host. >> If IP based access restrictions are required, please edit >> /iso-dom >> entry in /etc/exports >> * The firewall has been updated, the old iptables configuration >> file >> was saved to >> /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 >> * The installation log file is available at: >> /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log >> * Please use the user "admin" and password specified in order >> to >> login >> into oVirt Engine >> * To configure additional users, first configure authentication >> domains using the 'engine-manage-domains' utility >> * To access oVirt Engine please go to the following URL: >> http://ovirt-engine-112:80 >> [root@ovirt-engine-112 ~]# >> >> >> -- >> Shu Ming<shuming@linux.vnet.ibm.com> >> IBM China Systems and Technology Laboratory >> >> >> _______________________________________________ >> Engine-devel mailing list >> Engine-devel@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/engine-devel >> -- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory
-- Shu Ming<shuming@linux.vnet.ibm.com> IBM China Systems and Technology Laboratory --------------020708010003090106050701 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> After "touch engine.ear.doreply" in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, ovirt engine can be accessed now. Thanks for your support. <br> <br> On 2012-5-2 0:50, Ofer Schreiber wrote: <blockquote cite="mid:9F20D9B5-DFE3-44BE-836B-DFACCEEB0C3B@redhat.com" type="cite"> <div> <div style="text-align: left;direction: ltr; ">What about creating the engine.ear.dodeploy file as suggested earlier?</div> <br> <div style="direction: rtl;"><br> </div> </div> <div><br> On 1 May 2012, at 18:15, Shu Ming <<a moz-do-not-send="true" href="mailto:shuming@linux.vnet.ibm.com">shuming@linux.vnet.ibm.com</a>> wrote:<br> <br> </div> <blockquote type="cite"> <div> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> Oops. Actually, I deleted the engine.ear.failed and engine.ear was there untouched.<br> Her is the directory hierarchy now in jboss deployment directory.<br> <br> [root@ovirt-engine-112 deployments]# pwd<br> /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments<br> [root@ovirt-engine-112 deployments]# ls -l<br> total 16<br> lrwxrwxrwx. 1 root root 34 Apr 28 01:14 engine.ear -> /usr/share/ovirt-engine/engine.ear<br> -rw-r--r--. 1 jboss-as jboss-as 8868 Dec 2 05:10 README.txt<br> lrwxrwxrwx. 1 root root 48 Apr 28 01:14 ROOT.war -> /usr/share/ovirt-engine/resources/jboss/ROOT.war<br> -rw-rw-r--. 1 jboss-as jboss-as 8 Apr 28 01:14 ROOT.war.deployed<br> [root@ovirt-engine-112 deployments]#<br> <br> <br> <br> On 2012-5-1 4:11, Ofer Schreiber wrote: <blockquote cite="mid:36C82119-0445-49AD-98E2-B6A240E73D2F@redhat.com" type="cite"> <div> <div style="text-align: left;direction: ltr; ">Please re create the link to engine.ear. </div> <div style="text-align: left;direction: ltr; ">That's the base java code that contains webadmin. </div> <div style="text-align: left;direction: ltr; "><br> </div> <div style="text-align: left;direction: ltr; ">If it doesn't deploy, create also engine.ear.dodeploy</div> <div style="text-align: left;direction: ltr; "><br> </div> <div style="text-align: left;direction: ltr; ">Ofer. </div> <br> <div style="direction: rtl;"><br> </div> </div> <div><br> On 30 Apr 2012, at 19:23, Shu Ming <<a moz-do-not-send="true" href="mailto:shuming@linux.vnet.ibm.com">shuming@linux.vnet.ibm.com</a>> wrote:<br> <br> </div> <blockquote type="cite"> <div> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> After deleting the engine.ear in /usr/share/jboss-as-7.1.0.Beta1b/standalone/deployments, I can access the page now. Thanks for you suggestions.<br> <br> However, when I tried to access "Administrator Portal(no SSL)". The following errors were encountered.<br> <br> <h1>HTTP Status 404 - /webadmin</h1> <hr noshade="noshade" size="1"> <p><b>type</b> Status report</p> <p><b>message</b> <u>/webadmin</u></p> <p><b>description</b> <u>The requested resource (/webadmin) is not available.</u></p> <hr noshade="noshade" size="1"> <h3>JBoss Web/7.0.3.Final</h3> <br> <br> On 2012-4-30 15:22, Ofer Schreiber wrote: <blockquote cite="mid:8faf07bc-015d-439d-b403-8d3d216b58ad@zmail14.collab.prod.int.phx2.redhat.com" type="cite"> <pre wrap="">Looks like something went wrong with the .ear deployment. (already saw such an issue in <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html">http://lists.ovirt.org/pipermail/engine-devel/2012-January/000483.html</a>) Can you please: 1. Stop JBoss 2. Make sure jboss deployment directory contain a single engine.ear - Remove engine.ear.failed (or similar files if exists) 3. Start JBoss again ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">On 2012-4-29 19:33, Ofer Schreiber wrote: </pre> <blockquote type="cite"> <pre wrap="">I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? </pre> </blockquote> <pre wrap="">Sorry for confusion here. I used engine-cleanup and ran engine-setup again after the 3.1 RPM package were installed. </pre> <blockquote type="cite"> <pre wrap="">2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/jboss-as/console.log 01:15:16,901 INFO [org.jboss.as] (Controller Boot Thread) JBoss AS 7.1.0.Beta1b "Tesla" started in 2405ms - Started 140 of 203 services (61 services are passive or on-demand) 01:15:17,207 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment engine.ear 01:15:17,431 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment ROOT.war 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found ROOT.war in deployment directory. To trigger deployment create a file called ROOT.war.dodeploy 01:15:17,432 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 01:15:17,478 ERROR [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014612: Operation ("add") failed - address: ([("deployment" => "engine.ear")]): java.lang.IllegalStateException: JBAS014666: Duplicate resource [("deployment" => "engine.ear")] at org.jboss.as.controller.OperationContextImpl.addResource(OperationContextImpl.java:503) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.controller.OperationContextImpl.createResource(OperationContextImpl.java:471) [jboss-as-controller-7.1.0.Beta1b.jar:] at org.jboss.as.server.deployment.DeploymentAddHandler.execute(DeploymentAddHandler.java:170) .... at java.util.concurrent.FutureTask.run(FutureTask.java:166) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) [:1.6.0_24] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) [:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) [:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [:1.6.0_24] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:] 01:15:17,482 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-1" => "JBAS014749: Operation handler failed: JBAS014666: Duplicate resource [(\"deployment\" => \"engine.ear\")]"}} 01:15:17,483 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) undefined </pre> <blockquote type="cite"> <pre wrap="">3. Any error in the httpd log? </pre> </blockquote> <pre wrap="">[root@ovirt-engine-112 ~]# cat /var/log/httpd/access_log 9.181.193.205 - - [30/Apr/2012:00:28:27 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:44 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:54 +0800] "GET / HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" 9.181.193.205 - - [30/Apr/2012:00:28:55 +0800] "GET /favicon.ico HTTP/1.0" 404 - "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 ( .NET CLR 3.5.30729)" [root@ovirt-engine-112 ~]# [root@ovirt-engine-112 ~]# cat /var/log/httpd/error_log [Sun Apr 29 03:36:02 2012] [notice] Digest: generating secret for digest authentication ... [Sun Apr 29 03:36:02 2012] [notice] Digest: done [Sun Apr 29 03:36:02 2012] [notice] SSL FIPS mode disabled [Sun Apr 29 03:36:02 2012] [notice] Apache/2.2.22 (Unix) DAV/2 mod_ssl/2.2.22 OpenSSL/1.0.0h-fips configured -- resuming normal operations [root@ovirt-engine-112 ~]# </pre> <blockquote type="cite"> <pre wrap="">4. What happens if you stop iptables and access your server with :8080? </pre> </blockquote> <pre wrap="">The same as before. </pre> <blockquote type="cite"> <pre wrap="">Thanks, Ofer ----- Original Message ----- </pre> <blockquote type="cite"> <pre wrap="">Hi, I built a set of ovirt engine RPM packages from near the latest ovirt engine source code. However, when I try to access the engine server with URL <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="http://ovirt-engine-112:80">"http://ovirt-engine-112:80"</a>, the browser displayed a blank page without http error returned. Any clue about what is going on here? Why didn't the engine administrator home page be shown? And the packages were also installed successfully in my target system, checked this by "rpm -q -a|grep engine". I) upgraded the packages to the 3.1 [root@ovirt-engine-112 ~]# rpm -q -a |grep engine ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-jbossas-1.2-2.fc16.x86_64 ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 gtk2-engines-2.20.2-2.fc15.x86_64 Step II) Then I used "engine-setup" to setup the engine. It seems that everything is ok, see the log below. ------------- [root@ovirt-engine-112 ~]# engine-setup Welcome to oVirt Engine setup utility HTTP Port [80] : HTTPS Port [443] : Host fully qualified domain name, note that this name should be fully resolvable [ovirt-engine-112] : ERROR: domain is not a valid domain name User input failed validation, do you still wish to use it? (yes|no): yes Password for Administrator (admin@internal) : Warning: Weak Password. Confirm password : Organization Name for the Certificate: cstl The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] [NFS] : Enter DB type for installation ['remote'| 'local'] [local] : Local database password : Warning: Weak Password. Confirm password : Should the installer configure NFS share on this server to be used as an ISO Domain? ['yes'| 'no'] [yes] : Mount point path: /iso-dom ERROR: mount point already exists in /etc/exports Mount point path: /iso-dom Display name for the ISO Domain: iso-domains Firewall ports need to be opened. You can let the installer configure iptables automatically overriding the current configuration. The old configuration will be backed up. Alternately you can configure the firewall later using an example iptables file found under /usr/share/ovirt-engine/conf/iptables.example Configure iptables ? ['yes'| 'no']: yes oVirt Engine will be installed using the following configuration: ================================================================= http-port: 80 https-port: 443 host-fqdn: ovirt-engine-112 auth-pass: ******** org-name: cstl default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /iso-dom iso-domain-name: iso-domains config-nfs: yes override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ DONE ] **** Installation completed successfully ****** (Please allow oVirt Engine a few moments to start up.....) Additional information: * SSL Certificate fingerprint: C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF * SSH Public key fingerprint: 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 * A default ISO share has been created on this host. If IP based access restrictions are required, please edit /iso-dom entry in /etc/exports * The firewall has been updated, the old iptables configuration file was saved to /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 * The installation log file is available at: /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log * Please use the user "admin" and password specified in order to login into oVirt Engine * To configure additional users, first configure authentication domains using the 'engine-manage-domains' utility * To access oVirt Engine please go to the following URL: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://ovirt-engine-112:80">http://ovirt-engine-112:80</a> [root@ovirt-engine-112 ~]# -- Shu Ming<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory _______________________________________________ Engine-devel mailing list <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Engine-devel@ovirt.org">Engine-devel@ovirt.org</a> <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/engine-devel">http://lists.ovirt.org/mailman/listinfo/engine-devel</a> </pre> </blockquote> </blockquote> <pre wrap="">-- Shu Ming<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory </pre> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </div> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </div> </blockquote> </blockquote> <br> <br> <pre class="moz-signature" cols="72">-- Shu Ming <a class="moz-txt-link-rfc2396E" href="mailto:shuming@linux.vnet.ibm.com"><shuming@linux.vnet.ibm.com></a> IBM China Systems and Technology Laboratory</pre> </body> </html> --------------020708010003090106050701--
participants (2)
-
Ofer Schreiber -
Shu Ming