[ACTION NEEDED] you must install PatternFly for new look-and-feel to work
Hi oVirt developers, We extracted the new look-and-feel 'library' (called PatternFly) into its own proper RPM, and removed it from the oVirt source tree in [1] If you rebase without installing this library, your UI will be severely messed up :) You must now install the PatternFly RPM from [2]. Steps: 1. add the PatternFly repo from [2] to your system in /etc/yum.repos.d/ 2. yum install patternfly1 3. rebase ovirt-engine, build 4. run engine-setup [1] http://gerrit.ovirt.org/#/c/29018/ [2] https://copr.fedoraproject.org/coprs/patternfly/patternfly1/ Let me know if there are any problems! Greg Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme@redhat.com
If you happen to do this in the next couple hours, there is a bug in the PatternFly RPM that I will fix shortly. To work around: cd /usr/share/patternfly1/resources/css/ sudo rm styles.min.css ln -s patternfly.min.css styles.min.css and refresh the page. Greg ----- Original Message -----
From: "Greg Sheremeta" <gshereme@redhat.com> To: devel@ovirt.org Sent: Tuesday, July 8, 2014 9:06:16 AM Subject: [ACTION NEEDED] you must install PatternFly for new look-and-feel to work
Hi oVirt developers,
We extracted the new look-and-feel 'library' (called PatternFly) into its own proper RPM, and removed it from the oVirt source tree in [1]
If you rebase without installing this library, your UI will be severely messed up :) You must now install the PatternFly RPM from [2].
Steps: 1. add the PatternFly repo from [2] to your system in /etc/yum.repos.d/ 2. yum install patternfly1 3. rebase ovirt-engine, build 4. run engine-setup
[1] http://gerrit.ovirt.org/#/c/29018/ [2] https://copr.fedoraproject.org/coprs/patternfly/patternfly1/
Let me know if there are any problems!
Greg
Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme@redhat.com
----- Original Message -----
From: "Greg Sheremeta" <gshereme@redhat.com> To: devel@ovirt.org Sent: Tuesday, July 8, 2014 9:50:08 AM Subject: Re: [ovirt-devel] [ACTION NEEDED] you must install PatternFly for new look-and-feel to work
If you happen to do this in the next couple hours, there is a bug in the PatternFly RPM that I will fix shortly.
fixed. If you worked around it, sudo yum remove patternfly1 sudo yum localinstall http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/fedora... Sorry about that :) Greg
To work around:
cd /usr/share/patternfly1/resources/css/ sudo rm styles.min.css ln -s patternfly.min.css styles.min.css
and refresh the page.
Greg
----- Original Message -----
From: "Greg Sheremeta" <gshereme@redhat.com> To: devel@ovirt.org Sent: Tuesday, July 8, 2014 9:06:16 AM Subject: [ACTION NEEDED] you must install PatternFly for new look-and-feel to work
Hi oVirt developers,
We extracted the new look-and-feel 'library' (called PatternFly) into its own proper RPM, and removed it from the oVirt source tree in [1]
If you rebase without installing this library, your UI will be severely messed up :) You must now install the PatternFly RPM from [2].
Steps: 1. add the PatternFly repo from [2] to your system in /etc/yum.repos.d/ 2. yum install patternfly1 3. rebase ovirt-engine, build 4. run engine-setup
[1] http://gerrit.ovirt.org/#/c/29018/ [2] https://copr.fedoraproject.org/coprs/patternfly/patternfly1/
Let me know if there are any problems!
Greg
Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme@redhat.com
Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
Am 08.07.2014 15:06, schrieb Greg Sheremeta:
Hi oVirt developers,
We extracted the new look-and-feel 'library' (called PatternFly) into its own proper RPM, and removed it from the oVirt source tree in [1]
If you rebase without installing this library, your UI will be severely messed up :) You must now install the PatternFly RPM from [2].
Steps: 1. add the PatternFly repo from [2] to your system in /etc/yum.repos.d/ 2. yum install patternfly1 3. rebase ovirt-engine, build 4. run engine-setup
[1] http://gerrit.ovirt.org/#/c/29018/ [2] https://copr.fedoraproject.org/coprs/patternfly/patternfly1/
Let me know if there are any problems!
Is there an infra ticket for this, so these packages get build automatically for releases and the specfiles with the dependencies are updated as well? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
----- Original Message -----
From: "Sven Kieske" <S.Kieske@mittwald.de> To: devel@ovirt.org Sent: Tuesday, July 8, 2014 10:10:06 AM Subject: Re: [ovirt-devel] [ACTION NEEDED] you must install PatternFly for new look-and-feel to work
Am 08.07.2014 15:06, schrieb Greg Sheremeta:
Hi oVirt developers,
We extracted the new look-and-feel 'library' (called PatternFly) into its own proper RPM, and removed it from the oVirt source tree in [1]
If you rebase without installing this library, your UI will be severely messed up :) You must now install the PatternFly RPM from [2].
Steps: 1. add the PatternFly repo from [2] to your system in /etc/yum.repos.d/ 2. yum install patternfly1 3. rebase ovirt-engine, build 4. run engine-setup
[1] http://gerrit.ovirt.org/#/c/29018/ [2] https://copr.fedoraproject.org/coprs/patternfly/patternfly1/
Let me know if there are any problems!
Is there an infra ticket for this, so these packages get build automatically for releases and the specfiles with the dependencies are updated as well?
Not a ticket, but a Gerrit patch :) http://gerrit.ovirt.org/#/c/29528/ Is that what you're looking for? Greg
-- Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen _______________________________________________ Devel mailing list Devel@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel
even better, but is http://copr-be.cloud.fedoraproject.org/ a long available link where you can download this? the release packages will be in the wild for some time so there should be a stable link available which will not change every X weeks. Am 08.07.2014 16:37, schrieb Greg Sheremeta:
Not a ticket, but a Gerrit patch :) http://gerrit.ovirt.org/#/c/29528/
Is that what you're looking for?
-- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
----- Original Message -----
From: "Sven Kieske" <S.Kieske@mittwald.de> To: "Greg Sheremeta" <gshereme@redhat.com> Cc: devel@ovirt.org Sent: Tuesday, July 8, 2014 10:47:02 AM Subject: Re: [ovirt-devel] [ACTION NEEDED] you must install PatternFly for new look-and-feel to work
even better, but is http://copr-be.cloud.fedoraproject.org/ a long available link where you can download this? the release packages will be in the wild for some time so there should be a stable link available which will not change every X weeks.
Great questions. PatternFly team has committed to keeping this repo stable and up-to-date long-term. It will be their official yum repo (until they get the project packaged in Fedora, but that will be super difficult). And from what I understand about copr, the repo link shouldn't break ever.
Am 08.07.2014 16:37, schrieb Greg Sheremeta:
Not a ticket, but a Gerrit patch :) http://gerrit.ovirt.org/#/c/29528/
Is that what you're looking for?
-- Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
participants (2)
-
Greg Sheremeta -
Sven Kieske