11:28 a.m.
Hi,
I've added a SKIP_CHECKS flag to the ovirt-engine build here [1]. Thanks to
Roy for the idea [2].
TL;DR: you'll save roughly 2 minutes 10 seconds per full compile with
SKIP_CHECKS. You'll save more (3 min 10 sec) if you don't need a 'clean'.
You'll save the most (about 3 min 20 sec) if you can skip rebuilding GWT.
Here are some statistics (3 runs per command, for averages sake)
My test machine is a
Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
256GB Samsung SSD (old, using SATA)
32GB DDR3 @ 1333 MT/s
---
fresh master checkout
no clean, no gwt, skip checks:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
1:04.38 total
1:06.04 total
1:04.41 total
same as above, but now change one non-GWT class in the utils project
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
1:05.49 total
Ok, pretend we recompiled and our utils class change had an error.
Same as above, change the one non-GWT class in the utils project again, and
use the resume (-pl) functionality:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
17.958 total (yes, 18 seconds, obviously a world record for any engine
build)
[The resume piece is EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.ui:webadmin"
-- I personally need to use this more often!]
---
no clean, no gwt, run checks (but skip unit tests):
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 BUILD_UT=0
3:07.66 total
3:16.69 total
3:14.28 total
clean, no gwt, skip checks:
make clean install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0
SKIP_CHECKS=1
4:17.74 total
4:15.76 total
4:13.90 total
no clean, gwt (1 permutation for chrome), skip checks:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=1
SKIP_CHECKS=1 DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari"
4:25.63 total
4:26.71 total
4:30.69 total
no clean, gwt (1 permutation for chrome), run checks but skip unit tests:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=1 BUILD_UT=0
DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari"
6:44.23 total
And the whole enchilada [3] ... clean, gwt (1 permutation for chrome), run
checks, run unit tests:
11:52.25 total ... wow :)
Hope this helps you have a faster change-compile-check cycle :)
Best wishes,
Greg
[1] https://gerrit.ovirt.org/#/c/83961/
[2] https://www.mail-archive.com/devel@ovirt.org/msg10377.html
[3] https://idioms.thefreedictionary.com/whole+enchilada
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
<https://www.redhat.com/>
gshereme(a)redhat.com IRC: gshereme
<https://red.ht/sig>
3:38 p.m.
On Sun, 12 Nov 2017 at 19:29 Greg Sheremeta <gshereme(a)redhat.com> wrote:
Hi,
I've added a SKIP_CHECKS flag to the ovirt-engine build here [1]. Thanks
to Roy for the idea [2].
TL;DR: you'll save roughly 2 minutes 10 seconds per full compile with
SKIP_CHECKS. You'll save more (3 min 10 sec) if you don't need a
'clean'.
You'll save the most (about 3 min 20 sec) if you can skip rebuilding GWT.
Here are some statistics (3 runs per command, for averages sake)
My test machine is a
Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
256GB Samsung SSD (old, using SATA)
32GB DDR3 @ 1333 MT/s
---
fresh master checkout
no clean, no gwt, skip checks:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
1:04.38 total
1:06.04 total
1:04.41 total
same as above, but now change one non-GWT class in the utils project
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
1:05.49 total
Ok, pretend we recompiled and our utils class change had an error.
Same as above, change the one non-GWT class in the utils project again,
and use the resume (-pl) functionality:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
17.958 total (yes, 18 seconds, obviously a world record for any engine
build)
"-pl" is very useful mvn directive. It compiles only the
*p*roject-*l*ist
supplied. hence "pl". Add "-am" (*a*lso *m*ake) when you want to
compile
what utils depends on (like common) or "amd" (*a*lso *m*ake *d*ependents)
if you want to compile also projectd depends on utils (like vdsbroker)
[The resume piece is EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.ui:webadmin"
-- I personally need to use this more often!]
---
no clean, no gwt, run checks (but skip unit tests):
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 BUILD_UT=0
3:07.66 total
3:16.69 total
3:14.28 total
clean, no gwt, skip checks:
make clean install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0
SKIP_CHECKS=1
4:17.74 total
4:15.76 total
4:13.90 total
no clean, gwt (1 permutation for chrome), skip checks:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=1
SKIP_CHECKS=1 DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari"
4:25.63 total
4:26.71 total
4:30.69 total
no clean, gwt (1 permutation for chrome), run checks but skip unit tests:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=1 BUILD_UT=0
DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari"
6:44.23 total
And the whole enchilada [3] ... clean, gwt (1 permutation for chrome), run
checks, run unit tests:
11:52.25 total ... wow :)
Nice one Greg!
Now can we have "make WHOLE_ENCHILADA=1" please? :)
Hope this helps you have a faster change-compile-check cycle :)
Best wishes,
Greg
[1] https://gerrit.ovirt.org/#/c/83961/
[2] https://www.mail-archive.com/devel@ovirt.org/msg10377.html
[3] https://idioms.thefreedictionary.com/whole+enchilada
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
<https://www.redhat.com/>
gshereme(a)redhat.com IRC: gshereme
<https://red.ht/sig>
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
12:01 a.m.
for the below scenario of making a change limited to one module, where you
want a really fast install but do not want to forgo unit tests or checks,
you can run a direct install of just that module like so:
cd $DEV_ENGINE/backend/manager/modules/utils; mvn clean install && cp
target/utils-$ENGINE_VERSION-SNAPSHOT.jar
$DEP_ENGINE/share/ovirt-engine/modules/common/org/ovirt/engine/core/utils/main/utils.jar;
cd - #install utils-manager
where:
- $DEV_ENGINE is your source code home dir
- $DEP_ENGINE is your prefix dir
- $ENGINE_VERSION is the current snapshot version. e.g. 4.2.0
- using a hash at the end, allows me to quickly call this command with
reverse search on bash
BUILD SUCCESS
[INFO]
------------------------------------------------------------------------
[INFO] Total time: 2.699s
:)
On Sun, Nov 12, 2017 at 7:28 PM, Greg Sheremeta <gshereme(a)redhat.com> wrote:
Hi,
I've added a SKIP_CHECKS flag to the ovirt-engine build here [1]. Thanks
to Roy for the idea [2].
TL;DR: you'll save roughly 2 minutes 10 seconds per full compile with
SKIP_CHECKS. You'll save more (3 min 10 sec) if you don't need a
'clean'.
You'll save the most (about 3 min 20 sec) if you can skip rebuilding GWT.
Here are some statistics (3 runs per command, for averages sake)
My test machine is a
Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
256GB Samsung SSD (old, using SATA)
32GB DDR3 @ 1333 MT/s
---
fresh master checkout
no clean, no gwt, skip checks:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
1:04.38 total
1:06.04 total
1:04.41 total
same as above, but now change one non-GWT class in the utils project
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
1:05.49 total
Ok, pretend we recompiled and our utils class change had an error.
Same as above, change the one non-GWT class in the utils project again,
and use the resume (-pl) functionality:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 SKIP_CHECKS=1
EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.core:utils"
17.958 total (yes, 18 seconds, obviously a world record for any engine
build)
[The resume piece is EXTRA_BUILD_FLAGS="-pl org.ovirt.engine.ui:webadmin"
-- I personally need to use this more often!]
---
no clean, no gwt, run checks (but skip unit tests):
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0 BUILD_UT=0
3:07.66 total
3:16.69 total
3:14.28 total
clean, no gwt, skip checks:
make clean install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=0
SKIP_CHECKS=1
4:17.74 total
4:15.76 total
4:13.90 total
no clean, gwt (1 permutation for chrome), skip checks:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=1
SKIP_CHECKS=1 DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari"
4:25.63 total
4:26.71 total
4:30.69 total
no clean, gwt (1 permutation for chrome), run checks but skip unit tests:
make install-dev PREFIX=/home/greg/ovirt-engine BUILD_GWT=1 BUILD_UT=0
DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari"
6:44.23 total
And the whole enchilada [3] ... clean, gwt (1 permutation for chrome), run
checks, run unit tests:
11:52.25 total ... wow :)
Hope this helps you have a faster change-compile-check cycle :)
Best wishes,
Greg
[1] https://gerrit.ovirt.org/#/c/83961/
[2] https://www.mail-archive.com/devel@ovirt.org/msg10377.html
[3] https://idioms.thefreedictionary.com/whole+enchilada
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
<https://www.redhat.com/>
gshereme(a)redhat.com IRC: gshereme
<https://red.ht/sig>
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
--
IRC: erav
2594
days inactive
2597
days old
2 comments
3 participants
participants (3)
-
Eitan Raviv -
Greg Sheremeta -
Roy Golan