6:49 a.m.
Hi all,
I am trying to set up an eclipse development environment for ovirt-engine and am
running into a stubborn problem with missing classes. I have followed the
directions for importing the Maven projects as written here:
http://ovirt.org/wiki/Building_Ovirt_Engine/IDE
The projects are able to be imported but I see lots of errors about missing
imports such as:
import org.ovirt.engine.api.model.*
import org.ovirt.engine.core.common.*
I should have a complete ovirt-engine source repository (I cloned the
ovirt-engine git repo). Has anyone seen this problem before? Can you offer any
suggestions to help me resolve it? Thanks!
--
Adam Litke <agl(a)us.ibm.com>
IBM Linux Technology Center
7:58 a.m.
Hi Adam!
Please check if workspace maven resolution is enabled, and run a maven build with
install.
If it is still broken, then there must be a bad dependency in the pom.xml-s... it happens
:-(
Laszlo
----- Original Message -----
From: "Adam Litke" <agl(a)us.ibm.com>
To: engine-devel(a)ovirt.org
Sent: Monday, February 6, 2012 3:49:33 PM
Subject: [Engine-devel] Eclipse IDE setup
Hi all,
I am trying to set up an eclipse development environment for
ovirt-engine and am
running into a stubborn problem with missing classes. I have
followed the
directions for importing the Maven projects as written here:
http://ovirt.org/wiki/Building_Ovirt_Engine/IDE
The projects are able to be imported but I see lots of errors about
missing
imports such as:
import org.ovirt.engine.api.model.*
import org.ovirt.engine.core.common.*
I should have a complete ovirt-engine source repository (I cloned the
ovirt-engine git repo). Has anyone seen this problem before? Can
you offer any
suggestions to help me resolve it? Thanks!
--
Adam Litke <agl(a)us.ibm.com>
IBM Linux Technology Center
_______________________________________________
Engine-devel mailing list
Engine-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/engine-devel
9:18 a.m.
On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
Hi Adam!
Please check if workspace maven resolution is enabled, and run a maven build with
install.
If it is still broken, then there must be a bad dependency in the pom.xml-s... it happens
:-(
Thanks for your suggestions. Maven resolution is enabled. Then I tried to
build on the command line using mvn directly but got the same errors as in
eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
should be more stable) and I got a different set of compilation errors.
This brings up a few questions:
1.) Which jdk should I use? I am currently using OpenJDK
/usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
java version "1.6.0_23"
OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
2,) Does this need a Fedora/RH system to compile?
3.) My guess is that others are able to compile oVirt even if there are bad
dependencies in the pom.xml files. Otherwise they would already be fixed. How
do others fix the dependencies on their local systems.
Thanks for the help!
Laszlo
----- Original Message -----
> From: "Adam Litke" <agl(a)us.ibm.com>
> To: engine-devel(a)ovirt.org
> Sent: Monday, February 6, 2012 3:49:33 PM
> Subject: [Engine-devel] Eclipse IDE setup
>
> Hi all,
>
> I am trying to set up an eclipse development environment for
> ovirt-engine and am
> running into a stubborn problem with missing classes. I have
> followed the
> directions for importing the Maven projects as written here:
> http://ovirt.org/wiki/Building_Ovirt_Engine/IDE
>
> The projects are able to be imported but I see lots of errors about
> missing
> imports such as:
>
> import org.ovirt.engine.api.model.*
> import org.ovirt.engine.core.common.*
>
> I should have a complete ovirt-engine source repository (I cloned the
> ovirt-engine git repo). Has anyone seen this problem before? Can
> you offer any
> suggestions to help me resolve it? Thanks!
>
> --
> Adam Litke <agl(a)us.ibm.com>
> IBM Linux Technology Center
>
> _______________________________________________
> Engine-devel mailing list
> Engine-devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/engine-devel
>
--
Adam Litke <agl(a)us.ibm.com>
IBM Linux Technology Center
9:55 a.m.
This is a multi-part message in MIME format.
--------------080800080801040300050602
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
On 02/06/2012 12:18 PM, Adam Litke wrote:
On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
> Hi Adam!
>
> Please check if workspace maven resolution is enabled, and run a maven build with
install.
> If it is still broken, then there must be a bad dependency in the pom.xml-s... it
happens :-(
Thanks for your suggestions. Maven resolution is enabled. Then I tried to
build on the command line using mvn directly but got the same errors as in
eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
should be more stable) and I got a different set of compilation errors.
This brings up a few questions:
1.) Which jdk should I use? I am currently using OpenJDK
/usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
java version "1.6.0_23"
OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
I am using a very similar jdk but on Fedora -
#> java -version
java version "1.6.0_22"
OpenJDK Runtime Environment (IcedTea6 1.10.4) (fedora-60.1.10.4.fc15-x86_64)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
I can check what I am using on my Ubuntu machine when I get home.
Have you put the correct settings in ~/.m2/settings.xml?
http://www.ovirt.org/wiki/Building_oVirt_engine#Maven_personal_settings
Jon
2,) Does this need a Fedora/RH system to compile?
3.) My guess is that others are able to compile oVirt even if there are bad
dependencies in the pom.xml files. Otherwise they would already be fixed. How
do others fix the dependencies on their local systems.
Thanks for the help!
> Laszlo
>
> ----- Original Message -----
>> From: "Adam Litke"<agl(a)us.ibm.com>
>> To: engine-devel(a)ovirt.org
>> Sent: Monday, February 6, 2012 3:49:33 PM
>> Subject: [Engine-devel] Eclipse IDE setup
>>
>> Hi all,
>>
>> I am trying to set up an eclipse development environment for
>> ovirt-engine and am
>> running into a stubborn problem with missing classes. I have
>> followed the
>> directions for importing the Maven projects as written here:
>> http://ovirt.org/wiki/Building_Ovirt_Engine/IDE
>>
>> The projects are able to be imported but I see lots of errors about
>> missing
>> imports such as:
>>
>> import org.ovirt.engine.api.model.*
>> import org.ovirt.engine.core.common.*
>>
>> I should have a complete ovirt-engine source repository (I cloned the
>> ovirt-engine git repo). Has anyone seen this problem before? Can
>> you offer any
>> suggestions to help me resolve it? Thanks!
>>
>> --
>> Adam Litke<agl(a)us.ibm.com>
>> IBM Linux Technology Center
>>
>> _______________________________________________
>> Engine-devel mailing list
>> Engine-devel(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/engine-devel
>>
--------------080800080801040300050602
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
On 02/06/2012 12:18 PM, Adam Litke wrote:
<blockquote cite="mid:20120206171834.GH3026@us.ibm.com"
type="cite">
<pre wrap="">On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo
Hornyak wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi Adam!
Please check if workspace maven resolution is enabled, and run a maven build with
install.
If it is still broken, then there must be a bad dependency in the pom.xml-s... it happens
:-(
</pre>
</blockquote>
<pre wrap="">
Thanks for your suggestions. Maven resolution is enabled. Then I tried to
build on the command line using mvn directly but got the same errors as in
eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
should be more stable) and I got a different set of compilation errors.
This brings up a few questions:
1.) Which jdk should I use? I am currently using OpenJDK
/usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
java version "1.6.0_23"
OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
</pre>
</blockquote>
<font face="Helvetica, Arial, sans-serif"><br>
<br>
I am using a very similar jdk but on Fedora - <br>
<br>
<br>
<br>
#> java -version<br>
java version "1.6.0_22"<br>
OpenJDK Runtime Environment (IcedTea6 1.10.4)
(fedora-60.1.10.4.fc15-x86_64)<br>
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)<br>
<br>
<br>
I can check what I am using on my Ubuntu machine when I get home.<br>
<br>
Have you put the correct settings in ~/.m2/settings.xml?<br>
<a class="moz-txt-link-freetext"
href="http://www.ovirt.org/wiki/Building_oVirt_engine#Maven_personal...
<br>
Jon<br>
<br>
</font>
<blockquote cite="mid:20120206171834.GH3026@us.ibm.com"
type="cite">
<pre wrap="">
2,) Does this need a Fedora/RH system to compile?
3.) My guess is that others are able to compile oVirt even if there are bad
dependencies in the pom.xml files. Otherwise they would already be fixed. How
do others fix the dependencies on their local systems.
Thanks for the help!
</pre>
<blockquote type="cite">
<pre wrap="">
Laszlo
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Adam Litke" <a
class="moz-txt-link-rfc2396E"
href="mailto:agl@us.ibm.com"><agl@us.ibm.com></a>
To: <a class="moz-txt-link-abbreviated"
href="mailto:engine-devel@ovirt.org">engine-devel@ovirt.org</a>
Sent: Monday, February 6, 2012 3:49:33 PM
Subject: [Engine-devel] Eclipse IDE setup
Hi all,
I am trying to set up an eclipse development environment for
ovirt-engine and am
running into a stubborn problem with missing classes. I have
followed the
directions for importing the Maven projects as written here:
<a class="moz-txt-link-freetext"
href="http://ovirt.org/wiki/Building_Ovirt_Engine/IDE">http:...
The projects are able to be imported but I see lots of errors about
missing
imports such as:
import org.ovirt.engine.api.model.*
import org.ovirt.engine.core.common.*
I should have a complete ovirt-engine source repository (I cloned the
ovirt-engine git repo). Has anyone seen this problem before? Can
you offer any
suggestions to help me resolve it? Thanks!
--
Adam Litke <a class="moz-txt-link-rfc2396E"
href="mailto:agl@us.ibm.com"><agl@us.ibm.com></a>
IBM Linux Technology Center
_______________________________________________
Engine-devel mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Engine-devel@ovirt.org">Engine-devel@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/engine-devel">...
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<br>
</body>
</html>
--------------080800080801040300050602--
10:28 a.m.
On 06/02/12 19:18, Adam Litke wrote:
On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
> Hi Adam!
>
> Please check if workspace maven resolution is enabled, and run a maven build with
install.
> If it is still broken, then there must be a bad dependency in the pom.xml-s... it
happens :-(
Thanks for your suggestions. Maven resolution is enabled. Then I tried to
build on the command line using mvn directly but got the same errors as in
eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
should be more stable) and I got a different set of compilation errors.
Hi Adam,
This brings up a few questions:
1.) Which jdk should I use? I am currently using OpenJDK
/usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
java version "1.6.0_23"
OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
you are using the right JDK.
2,) Does this need a Fedora/RH system to compile?
The engine works on Fedora, RHEL, Ubuntu Gentoo and should work on any
other Linux based operating system (Java is platform agnostic).
3.) My guess is that others are able to compile oVirt even if there are bad
dependencies in the pom.xml files. Otherwise they would already be fixed. How
do others fix the dependencies on their local systems.
There should not be any local issues, let's try to figure out what the
issues are.
The errors are probably not related to eclipse because you have
compilation errors from the command line as well.
I would start by compiling the engine and api with no tests and no UI:
Run from the command line -
1. $ovirt_engine_home> mvn clean
2. $ovirt_engine_home> mvn install -DskipTests
What is the result of the above two?
Livnat
Thanks for the help!
>
> Laszlo
>
> ----- Original Message -----
>> From: "Adam Litke" <agl(a)us.ibm.com>
>> To: engine-devel(a)ovirt.org
>> Sent: Monday, February 6, 2012 3:49:33 PM
>> Subject: [Engine-devel] Eclipse IDE setup
>>
>> Hi all,
>>
>> I am trying to set up an eclipse development environment for
>> ovirt-engine and am
>> running into a stubborn problem with missing classes. I have
>> followed the
>> directions for importing the Maven projects as written here:
>> http://ovirt.org/wiki/Building_Ovirt_Engine/IDE
>>
>> The projects are able to be imported but I see lots of errors about
>> missing
>> imports such as:
>>
>> import org.ovirt.engine.api.model.*
>> import org.ovirt.engine.core.common.*
>>
>> I should have a complete ovirt-engine source repository (I cloned the
>> ovirt-engine git repo). Has anyone seen this problem before? Can
>> you offer any
>> suggestions to help me resolve it? Thanks!
>>
>> --
>> Adam Litke <agl(a)us.ibm.com>
>> IBM Linux Technology Center
>>
>> _______________________________________________
>> Engine-devel mailing list
>> Engine-devel(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/engine-devel
>>
>
11:47 a.m.
On Mon, Feb 06, 2012 at 08:28:19PM +0200, Livnat Peer wrote:
On 06/02/12 19:18, Adam Litke wrote:
> On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
>> Hi Adam!
>>
>> Please check if workspace maven resolution is enabled, and run a maven build
with install.
>> If it is still broken, then there must be a bad dependency in the pom.xml-s...
it happens :-(
>
> Thanks for your suggestions. Maven resolution is enabled. Then I tried to
> build on the command line using mvn directly but got the same errors as in
> eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
> should be more stable) and I got a different set of compilation errors.
>
Hi Adam,
> This brings up a few questions:
>
> 1.) Which jdk should I use? I am currently using OpenJDK
>
> /usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
> java version "1.6.0_23"
> OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
> OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
>
you are using the right JDK.
> 2,) Does this need a Fedora/RH system to compile?
The engine works on Fedora, RHEL, Ubuntu Gentoo and should work on any
other Linux based operating system (Java is platform agnostic).
>
> 3.) My guess is that others are able to compile oVirt even if there are bad
> dependencies in the pom.xml files. Otherwise they would already be fixed. How
> do others fix the dependencies on their local systems.
>
There should not be any local issues, let's try to figure out what the
issues are.
The errors are probably not related to eclipse because you have
compilation errors from the command line as well.
I would start by compiling the engine and api with no tests and no UI:
Run from the command line -
1. $ovirt_engine_home> mvn clean
2. $ovirt_engine_home> mvn install -DskipTests
What is the result of the above two?
Thanks Livnat! The mvn clean was successful. Here are the errors from the
install step:
[INFO] ------------------------------------------------------------------------
[INFO] Building Shared GWT code
[INFO] task-segment: [install]
[INFO] ------------------------------------------------------------------------
[INFO] [clean:clean {execution: auto-clean}]
[INFO] [dependency:unpack {execution: copy}]
[INFO] Configured Artifact: org.ovirt.engine.core:common:sources:3.0.0-0001:jar
[INFO] Configured Artifact: org.ovirt.engine.core:compat:sources:3.0.0-0001:jar
[INFO] Configured Artifact: org.ovirt.engine.core:searchbackend:sources:3.0.0-0001:jar
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/common/3.0.0-0001/common-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/compat/3.0.0-0001/compat-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/searchbackend/3.0.0-0001/searchbackend-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] [resources:resources {execution: default-resources}]
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 3 resources
[INFO] skip non existing resourceDirectory
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/resources
[INFO] [gwt:resources {execution: default}]
[INFO] 750 source files copied from GWT module org.ovirt.engine.SharedGwt
[INFO] [compiler:compile {execution: default-compile}]
[INFO] Compiling 749 source files to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/target/classes
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Compilation failure
Quota.java:[52,52] cannot find symbol
symbol : variable QUOTA_NAME_SIZE
location: class org.ovirt.engine.core.common.businessentities.BusinessEntitiesDefinitions
Quota.java:[58,52] cannot find symbol
symbol : variable QUOTA_DESCRIPTION_SIZE
location: class org.ovirt.engine.core.common.businessentities.BusinessEntitiesDefinitions
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1 minute 52 seconds
[INFO] Finished at: Mon Feb 06 13:45:09 CST 2012
[INFO] Final Memory: 241M/575M
[INFO] ------------------------------------------------------------------------
--
Adam Litke <agl(a)us.ibm.com>
IBM Linux Technology Center
12:24 p.m.
On 06/02/12 21:47, Adam Litke wrote:
On Mon, Feb 06, 2012 at 08:28:19PM +0200, Livnat Peer wrote:
> On 06/02/12 19:18, Adam Litke wrote:
>> On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
>>> Hi Adam!
>>>
>>> Please check if workspace maven resolution is enabled, and run a maven build
with install.
>>> If it is still broken, then there must be a bad dependency in the
pom.xml-s... it happens :-(
>>
>> Thanks for your suggestions. Maven resolution is enabled. Then I tried to
>> build on the command line using mvn directly but got the same errors as in
>> eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
>> should be more stable) and I got a different set of compilation errors.
>>
>
> Hi Adam,
>
>> This brings up a few questions:
>>
>> 1.) Which jdk should I use? I am currently using OpenJDK
>>
>> /usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
>> java version "1.6.0_23"
>> OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
>> OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
>>
>
> you are using the right JDK.
>
>> 2,) Does this need a Fedora/RH system to compile?
>
> The engine works on Fedora, RHEL, Ubuntu Gentoo and should work on any
> other Linux based operating system (Java is platform agnostic).
>
>
>>
>> 3.) My guess is that others are able to compile oVirt even if there are bad
>> dependencies in the pom.xml files. Otherwise they would already be fixed. How
>> do others fix the dependencies on their local systems.
>>
>
> There should not be any local issues, let's try to figure out what the
> issues are.
>
> The errors are probably not related to eclipse because you have
> compilation errors from the command line as well.
>
> I would start by compiling the engine and api with no tests and no UI:
>
> Run from the command line -
>
> 1. $ovirt_engine_home> mvn clean
> 2. $ovirt_engine_home> mvn install -DskipTests
>
> What is the result of the above two?
Thanks Livnat! The mvn clean was successful. Here are the errors from the
install step:
1. do you have latest? when did you fetch last (I can fetch the same
commit hash to make sure it compiles, I have latest and it compiles)
2. let try to compile the engine without the GWT stub -
$ovirt_engine_home> cd backend/manager
$ovirt_engine_home/backend/manager > mvn install -DskipTests
What is the result of the above?
BTW if you want online help I am on the ovirt IRC channel.
[INFO] ------------------------------------------------------------------------
[INFO] Building Shared GWT code
[INFO] task-segment: [install]
[INFO] ------------------------------------------------------------------------
[INFO] [clean:clean {execution: auto-clean}]
[INFO] [dependency:unpack {execution: copy}]
[INFO] Configured Artifact: org.ovirt.engine.core:common:sources:3.0.0-0001:jar
[INFO] Configured Artifact: org.ovirt.engine.core:compat:sources:3.0.0-0001:jar
[INFO] Configured Artifact: org.ovirt.engine.core:searchbackend:sources:3.0.0-0001:jar
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/common/3.0.0-0001/common-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/compat/3.0.0-0001/compat-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/searchbackend/3.0.0-0001/searchbackend-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] [resources:resources {execution: default-resources}]
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 3 resources
[INFO] skip non existing resourceDirectory
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/resources
[INFO] [gwt:resources {execution: default}]
[INFO] 750 source files copied from GWT module org.ovirt.engine.SharedGwt
[INFO] [compiler:compile {execution: default-compile}]
[INFO] Compiling 749 source files to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/target/classes
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Compilation failure
Quota.java:[52,52] cannot find symbol
symbol : variable QUOTA_NAME_SIZE
location: class
org.ovirt.engine.core.common.businessentities.BusinessEntitiesDefinitions
Quota.java:[58,52] cannot find symbol
symbol : variable QUOTA_DESCRIPTION_SIZE
location: class
org.ovirt.engine.core.common.businessentities.BusinessEntitiesDefinitions
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1 minute 52 seconds
[INFO] Finished at: Mon Feb 06 13:45:09 CST 2012
[INFO] Final Memory: 241M/575M
[INFO] ------------------------------------------------------------------------
6:16 a.m.
On Mon, Feb 06, 2012 at 10:24:36PM +0200, Livnat Peer wrote:
On 06/02/12 21:47, Adam Litke wrote:
> On Mon, Feb 06, 2012 at 08:28:19PM +0200, Livnat Peer wrote:
>> On 06/02/12 19:18, Adam Litke wrote:
>>> On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
>>>> Hi Adam!
>>>>
>>>> Please check if workspace maven resolution is enabled, and run a maven
build with install.
>>>> If it is still broken, then there must be a bad dependency in the
pom.xml-s... it happens :-(
>>>
>>> Thanks for your suggestions. Maven resolution is enabled. Then I tried to
>>> build on the command line using mvn directly but got the same errors as in
>>> eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the
build
>>> should be more stable) and I got a different set of compilation errors.
>>>
>>
>> Hi Adam,
>>
>>> This brings up a few questions:
>>>
>>> 1.) Which jdk should I use? I am currently using OpenJDK
>>>
>>> /usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
>>> java version "1.6.0_23"
>>> OpenJDK Runtime Environment (IcedTea6 1.11pre)
(6b23~pre11-0ubuntu1.11.10.1)
>>> OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
>>>
>>
>> you are using the right JDK.
>>
>>> 2,) Does this need a Fedora/RH system to compile?
>>
>> The engine works on Fedora, RHEL, Ubuntu Gentoo and should work on any
>> other Linux based operating system (Java is platform agnostic).
>>
>>
>>>
>>> 3.) My guess is that others are able to compile oVirt even if there are bad
>>> dependencies in the pom.xml files. Otherwise they would already be fixed.
How
>>> do others fix the dependencies on their local systems.
>>>
>>
>> There should not be any local issues, let's try to figure out what the
>> issues are.
>>
>> The errors are probably not related to eclipse because you have
>> compilation errors from the command line as well.
>>
>> I would start by compiling the engine and api with no tests and no UI:
>>
>> Run from the command line -
>>
>> 1. $ovirt_engine_home> mvn clean
>> 2. $ovirt_engine_home> mvn install -DskipTests
>>
>> What is the result of the above two?
>
> Thanks Livnat! The mvn clean was successful. Here are the errors from the
> install step:
1. do you have latest? when did you fetch last (I can fetch the same
commit hash to make sure it compiles, I have latest and it compiles)
Ok. I guess I had the 3.0 branch checked out when I was trying to fix the
compile. By moving back to master, I was able to build from the command line
successfully. However, I still get lots of errors in eclipse. I will include a
few below:
Action cannot be resolved to a type
ActionResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 34 Java Problem
Actions cannot be resolved to a type
ActionsBuilder.java
/restapi-definition/src/main/java/org/ovirt/engine/api/model line 35 Java Problem
BaseDevice cannot be resolved to a type
DeviceResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 28 Java Problem
BaseDevices cannot be resolved to a type
DevicesResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 33 Java Problem
BaseResource cannot be resolved to a type
RemovableStorageDomainContentsResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 28 Java Problem
BaseResources cannot be resolved to a type
RemovableStorageDomainContentsResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 28 Java Problem
Bound mismatch: The type C is not a valid substitute for the bounded parameter
<C extends BaseDevices> of the type ReadOnlyDevicesResource<D,C>
DevicesResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 34 Java Problem
Bound mismatch: The type D is not a valid substitute for the bounded parameter
<D extends BaseDevice> of the type DeviceResource<D>
DevicesResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 52 Java Problem
Bound mismatch: The type R is not a valid substitute for the bounded parameter
<R extends BaseResource> of the type StorageDomainContentResource<R>
StorageDomainContentsResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 36 Java Problem
Capabilities cannot be resolved to a type
CapabilitiesResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 33 Java Problem
CdRom cannot be resolved to a type
TemplateResource.java
/restapi-definition/src/main/java/org/ovirt/engine/api/resource line 51 Java Problem
--
Adam Litke <agl(a)us.ibm.com>
IBM Linux Technology Center
6:26 a.m.
Hi,
I went through setting Eclipse IDE for engine development recently.
After getting the maven build to work, and after importing all projects into eclipse,
following setup is required to get rid of all compilation errors reported by eclipse:
1) at restapi-definition -> project -> properties -> java build path -> source
-> add source folder -> target/generated sources/xjc
2) at webadmin -> project -> properties -> java build path -> source -> add
source folder-> target/generated sources/annotations,gwt,test-annotations
3) To get rid of the error "The method setCharacterEncoding(String) is undefined for
the type HttpServletResponse" in source
frontend/webadmin/modules/frontend/src/main/java/org/ovirt/engine/ui/frontend/server/gwt/WebadminDynamicHostingServlet.java,
I modified pom.xml at root level to change servlet API version from 2.3 to 2.4 as the
concerned API is introduced in 2.4
<javax.ejb.api.version>3.0</javax.ejb.api.version>
- <javax.servlet.api.version>2.3</javax.servlet.api.version>
+ <javax.servlet.api.version>2.4</javax.servlet.api.version>
<jcraft.jsch.version>0.1.42</jcraft.jsch.version>
4) Make sure that you import the engine code formatter into eclipse _before_ starting
development.
Window -> Preferences -> Java -> Code Style -> Formatter -> Import ->
<ovirt-src-root>/config/engine-code-format.xml
5) Above mentioned formatted doesn't work in comments. This can be resolved by adding
"Remove trailing whitespace" in "Save actions" as follows:
Window -> Preferences -> Java -> Editor -> Save Actions -> Additional
Actions -> Configure -> Code Organizing -> Remove trailing whitespace -> All
lines
6) For some reason, editing a properties file in eclipse results in a lot of
"diff" in git, making it difficult to review the code change. So I'm
resorting to editing properties file in a text editor outside eclipse for the time being.
I suspect this may not happen on all machines.
Regards,
Shireesh
----- Original Message -----
From: "Livnat Peer" <lpeer(a)redhat.com>
To: "Adam Litke" <agl(a)us.ibm.com>
Cc: engine-devel(a)ovirt.org
Sent: Tuesday, February 7, 2012 1:54:36 AM
Subject: Re: [Engine-devel] Eclipse IDE setup
On 06/02/12 21:47, Adam Litke wrote:
On Mon, Feb 06, 2012 at 08:28:19PM +0200, Livnat Peer wrote:
> On 06/02/12 19:18, Adam Litke wrote:
>> On Mon, Feb 06, 2012 at 10:58:13AM -0500, Laszlo Hornyak wrote:
>>> Hi Adam!
>>>
>>> Please check if workspace maven resolution is enabled, and run a maven build
with install.
>>> If it is still broken, then there must be a bad dependency in the
pom.xml-s... it happens :-(
>>
>> Thanks for your suggestions. Maven resolution is enabled. Then I tried to
>> build on the command line using mvn directly but got the same errors as in
>> eclipse. Next, I tried to checkout out the 3.0 branch (assuming that the build
>> should be more stable) and I got a different set of compilation errors.
>>
>
> Hi Adam,
>
>> This brings up a few questions:
>>
>> 1.) Which jdk should I use? I am currently using OpenJDK
>>
>> /usr/lib/jvm/java-1.6.0-openjdk/bin/java -version
>> java version "1.6.0_23"
>> OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1)
>> OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
>>
>
> you are using the right JDK.
>
>> 2,) Does this need a Fedora/RH system to compile?
>
> The engine works on Fedora, RHEL, Ubuntu Gentoo and should work on any
> other Linux based operating system (Java is platform agnostic).
>
>
>>
>> 3.) My guess is that others are able to compile oVirt even if there are bad
>> dependencies in the pom.xml files. Otherwise they would already be fixed. How
>> do others fix the dependencies on their local systems.
>>
>
> There should not be any local issues, let's try to figure out what the
> issues are.
>
> The errors are probably not related to eclipse because you have
> compilation errors from the command line as well.
>
> I would start by compiling the engine and api with no tests and no UI:
>
> Run from the command line -
>
> 1. $ovirt_engine_home> mvn clean
> 2. $ovirt_engine_home> mvn install -DskipTests
>
> What is the result of the above two?
Thanks Livnat! The mvn clean was successful. Here are the errors from the
install step:
1. do you have latest? when did you fetch last (I can fetch the same
commit hash to make sure it compiles, I have latest and it compiles)
2. let try to compile the engine without the GWT stub -
$ovirt_engine_home> cd backend/manager
$ovirt_engine_home/backend/manager > mvn install -DskipTests
What is the result of the above?
BTW if you want online help I am on the ovirt IRC channel.
[INFO] ------------------------------------------------------------------------
[INFO] Building Shared GWT code
[INFO] task-segment: [install]
[INFO] ------------------------------------------------------------------------
[INFO] [clean:clean {execution: auto-clean}]
[INFO] [dependency:unpack {execution: copy}]
[INFO] Configured Artifact: org.ovirt.engine.core:common:sources:3.0.0-0001:jar
[INFO] Configured Artifact: org.ovirt.engine.core:compat:sources:3.0.0-0001:jar
[INFO] Configured Artifact: org.ovirt.engine.core:searchbackend:sources:3.0.0-0001:jar
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/common/3.0.0-0001/common-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/compat/3.0.0-0001/compat-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] Unpacking
/home/aglitke/.m2/repository/org/ovirt/engine/core/searchbackend/3.0.0-0001/searchbackend-3.0.0-0001-sources.jar
to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/java
with includes null and excludes:null
[INFO] [resources:resources {execution: default-resources}]
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 3 resources
[INFO] skip non existing resourceDirectory
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/src/main/resources
[INFO] [gwt:resources {execution: default}]
[INFO] 750 source files copied from GWT module org.ovirt.engine.SharedGwt
[INFO] [compiler:compile {execution: default-compile}]
[INFO] Compiling 749 source files to
/home/aglitke/src/ovirt-engine/frontend/webadmin/modules/sharedgwt/target/classes
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Compilation failure
Quota.java:[52,52] cannot find symbol
symbol : variable QUOTA_NAME_SIZE
location: class
org.ovirt.engine.core.common.businessentities.BusinessEntitiesDefinitions
Quota.java:[58,52] cannot find symbol
symbol : variable QUOTA_DESCRIPTION_SIZE
location: class
org.ovirt.engine.core.common.businessentities.BusinessEntitiesDefinitions
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1 minute 52 seconds
[INFO] Finished at: Mon Feb 06 13:45:09 CST 2012
[INFO] Final Memory: 241M/575M
[INFO] ------------------------------------------------------------------------
_______________________________________________
Engine-devel mailing list
Engine-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/engine-devel
8:29 a.m.
On Mon, Feb 06, 2012 at 10:24:36PM +0200, Livnat Peer wrote:
BTW if you want online help I am on the ovirt IRC channel.
Thanks. I might need to take you up on your offer. Even after following the
suggestions in this thread I still have around 400 unsolved errors across
several different projects. What is your IRC nick? I wasn't able to recognize
you on #ovirt.
--
Adam Litke <agl(a)us.ibm.com>
IBM Linux Technology Center
3:02 p.m.
On 02/07/2012 04:26 PM, Shireesh Anjal wrote:
Hi,
I went through setting Eclipse IDE for engine development recently.
After getting the maven build to work, and after importing all projects into eclipse,
following setup is required to get rid of all compilation errors reported by eclipse:
1) at restapi-definition -> project -> properties -> java build path ->
source -> add source folder -> target/generated sources/xjc
2) at webadmin -> project -> properties -> java build path -> source
-> add source folder-> target/generated sources/annotations,gwt,test-annotations
3) To get rid of the error "The method setCharacterEncoding(String) is undefined for
the type HttpServletResponse" in source
frontend/webadmin/modules/frontend/src/main/java/org/ovirt/engine/ui/frontend/server/gwt/WebadminDynamicHostingServlet.java,
I modified pom.xml at root level to change servlet API version from 2.3 to 2.4 as the
concerned API is introduced in 2.4
<javax.ejb.api.version>3.0</javax.ejb.api.version>
-<javax.servlet.api.version>2.3</javax.servlet.api.version>
+<javax.servlet.api.version>2.4</javax.servlet.api.version>
<jcraft.jsch.version>0.1.42</jcraft.jsch.version>
4) Make sure that you import the engine code formatter into eclipse _before_ starting
development.
Window -> Preferences -> Java -> Code Style -> Formatter -> Import
-> <ovirt-src-root>/config/engine-code-format.xml
5) Above mentioned formatted doesn't work in comments. This can be resolved by adding
"Remove trailing whitespace" in "Save actions" as follows:
Window -> Preferences -> Java -> Editor -> Save Actions -> Additional
Actions -> Configure -> Code Organizing -> Remove trailing whitespace ->
All lines
6) For some reason, editing a properties file in eclipse results in a lot of
"diff" in git, making it difficult to review the code change. So I'm
resorting to editing properties file in a text editor outside eclipse for the time being.
I suspect this may not happen on all machines.
Shireesh - great points - care to update the wiki?
Also - I'd like to hope we can clean the pom files so #1-#3 would not be
needed manually?
10:43 p.m.
On 02/08/2012 01:02 AM, Itamar Heim wrote:
On 02/07/2012 04:26 PM, Shireesh Anjal wrote:
> Hi,
>
> I went through setting Eclipse IDE for engine development recently.
>
> After getting the maven build to work, and after importing all
> projects into eclipse, following setup is required to get rid of all
> compilation errors reported by eclipse:
>
> 1) at restapi-definition -> project -> properties -> java build
> path -> source -> add source folder -> target/generated sources/xjc
> 2) at webadmin -> project -> properties -> java build path ->
> source -> add source folder-> target/generated
> sources/annotations,gwt,test-annotations
>
> 3) To get rid of the error "The method setCharacterEncoding(String) is
> undefined for the type HttpServletResponse" in source
>
frontend/webadmin/modules/frontend/src/main/java/org/ovirt/engine/ui/frontend/server/gwt/WebadminDynamicHostingServlet.java,
> I modified pom.xml at root level to change servlet API version from
> 2.3 to 2.4 as the concerned API is introduced in 2.4
>
> <javax.ejb.api.version>3.0</javax.ejb.api.version>
> -<javax.servlet.api.version>2.3</javax.servlet.api.version>
> +<javax.servlet.api.version>2.4</javax.servlet.api.version>
> <jcraft.jsch.version>0.1.42</jcraft.jsch.version>
>
> 4) Make sure that you import the engine code formatter into eclipse
> _before_ starting development.
>
> Window -> Preferences -> Java -> Code Style -> Formatter ->
> Import -> <ovirt-src-root>/config/engine-code-format.xml
>
> 5) Above mentioned formatted doesn't work in comments. This can be
> resolved by adding "Remove trailing whitespace" in "Save actions"
as
> follows:
>
> Window -> Preferences -> Java -> Editor -> Save Actions ->
> Additional Actions -> Configure -> Code Organizing -> Remove
> trailing whitespace -> All lines
I would like to add that our maven
checkstyle plugin also fails build on
unused import. Make sure you also got it covered.
I personally did not set this at my IDE, but I rather handle this issue
manually.
>
> 6) For some reason, editing a properties file in eclipse results in a
> lot of "diff" in git, making it difficult to review the code change.
> So I'm resorting to editing properties file in a text editor outside
> eclipse for the time being. I suspect this may not happen on all
> machines.
Shireesh - great points - care to update the wiki?
Also - I'd like to hope we can clean the pom files so #1-#3 would not be
needed manually?
_______________________________________________
Engine-devel mailing list
Engine-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/engine-devel
11:05 p.m.
On 07/02/12 18:29, Adam Litke wrote:
On Mon, Feb 06, 2012 at 10:24:36PM +0200, Livnat Peer wrote:
> BTW if you want online help I am on the ovirt IRC channel.
Thanks. I might need to take you up on your offer. Even after following the
suggestions in this thread I still have around 400 unsolved errors across
several different projects. What is your IRC nick? I wasn't able to recognize
you on #ovirt.
lpeer,
I'll be happy to help, if I'm not online you can try:
- mkolesni
- lhornyak
Or in Westford (maybe the time zone will work better for you) we have:
- jumper45
Livnat
11:09 p.m.
On Wednesday 08 February 2012 04:32 AM, Itamar Heim wrote:
On 02/07/2012 04:26 PM, Shireesh Anjal wrote:
> Hi,
>
> I went through setting Eclipse IDE for engine development recently.
>
> After getting the maven build to work, and after importing all
> projects into eclipse, following setup is required to get rid of all
> compilation errors reported by eclipse:
>
> 1) at restapi-definition -> project -> properties -> java build
> path -> source -> add source folder -> target/generated sources/xjc
> 2) at webadmin -> project -> properties -> java build path ->
> source -> add source folder-> target/generated
> sources/annotations,gwt,test-annotations
>
> 3) To get rid of the error "The method setCharacterEncoding(String)
> is undefined for the type HttpServletResponse" in source
>
frontend/webadmin/modules/frontend/src/main/java/org/ovirt/engine/ui/frontend/server/gwt/WebadminDynamicHostingServlet.java,
> I modified pom.xml at root level to change servlet API version from
> 2.3 to 2.4 as the concerned API is introduced in 2.4
>
> <javax.ejb.api.version>3.0</javax.ejb.api.version>
> -<javax.servlet.api.version>2.3</javax.servlet.api.version>
> +<javax.servlet.api.version>2.4</javax.servlet.api.version>
> <jcraft.jsch.version>0.1.42</jcraft.jsch.version>
>
> 4) Make sure that you import the engine code formatter into eclipse
> _before_ starting development.
>
> Window -> Preferences -> Java -> Code Style -> Formatter ->
> Import -> <ovirt-src-root>/config/engine-code-format.xml
>
> 5) Above mentioned formatted doesn't work in comments. This can be
> resolved by adding "Remove trailing whitespace" in "Save actions"
as
> follows:
>
> Window -> Preferences -> Java -> Editor -> Save Actions ->
> Additional Actions -> Configure -> Code Organizing -> Remove
> trailing whitespace -> All lines
>
> 6) For some reason, editing a properties file in eclipse results in a
> lot of "diff" in git, making it difficult to review the code change.
> So I'm resorting to editing properties file in a text editor outside
> eclipse for the time being. I suspect this may not happen on all
> machines.
Shireesh - great points - care to update the wiki?
Have added the above points to an existing wiki page:
http://www.ovirt.org/wiki/Building_Ovirt_Engine/IDE
Also - I'd like to hope we can clean the pom files so #1-#3 would
not
be needed manually?
--
Regards,
Shireesh
4:20 a.m.
New subject: [Engine-devel] Exception with JRebel
Hi all
I setup JRebel as wiki suggests to reduce redeployment time. When I started up JBoss,
it's generally perfect except some errors
==========
2012-02-09 19:55:51,032 INFO [stdout] (MSC service thread 1-1) JRebel: Class
'org.jboss.as.ee.component.ViewConfiguration' could not be processed:
2012-02-09 19:55:51,033 ERROR [stderr] (MSC service thread 1-1)
org.zeroturnaround.bundled.javassist.NotFoundException:
addViewPostConstructInterceptor(..) is not found in
org.jboss.as.ee.component.ViewConfiguration
2012-02-09 19:55:51,034 ERROR [stderr] (MSC service thread 1-1) at
org.zeroturnaround.bundled.javassist.CtClassType.getDeclaredMethod(JRebel:1196)
2012-02-09 19:55:51,034 ERROR [stderr] (MSC service thread 1-1) at
org.zeroturnaround.javarebel.jboss7.cbp.ViewConfigurationCBP.process(ViewConfigurationCBP.java:59
==========
Is anyone with same situation , or it is a minor exception I can ignore? Log is attached
if you want it.
thanks
Joseph
4:33 a.m.
New subject: [Engine-devel] Exception with JRebel
Hi!
I am not sure, I remember I have seen this exception in my installation and still it did
not break any functionality, code replace worked fine.
Now it is working fine without the exception...
Laszlo
----- Original Message -----
From: jiaoyang(a)opzoon.com
To: "Laszlo Hornyak" <lhornyak(a)redhat.com>, "engine-devel"
<engine-devel(a)ovirt.org>
Sent: Thursday, February 9, 2012 1:20:12 PM
Subject: Exception with JRebel
Hi all
I setup JRebel as wiki suggests to reduce redeployment time. When I
started up JBoss,
it's generally perfect except some errors
==========
2012-02-09 19:55:51,032 INFO [stdout] (MSC service thread 1-1)
JRebel: Class 'org.jboss.as.ee.component.ViewConfiguration' could
not be processed:
2012-02-09 19:55:51,033 ERROR [stderr] (MSC service thread 1-1)
org.zeroturnaround.bundled.javassist.NotFoundException:
addViewPostConstructInterceptor(..) is not found in
org.jboss.as.ee.component.ViewConfiguration
2012-02-09 19:55:51,034 ERROR [stderr] (MSC service thread 1-1)
at
org.zeroturnaround.bundled.javassist.CtClassType.getDeclaredMethod(JRebel:1196)
2012-02-09 19:55:51,034 ERROR [stderr] (MSC service thread 1-1)
at
org.zeroturnaround.javarebel.jboss7.cbp.ViewConfigurationCBP.process(ViewConfigurationCBP.java:59
==========
Is anyone with same situation , or it is a minor exception I can
ignore? Log is attached if you want it.
thanks
Joseph
4461
days inactive
4464
days old
15 comments
8 participants
participants (8)
-
Adam Litke -
Itamar Heim -
jiaoyang＠opzoon.com -
Jon Choate -
Laszlo Hornyak -
Livnat Peer -
Shireesh Anjal -
Yair Zaslavsky