Hi, have you installed oVirt 4.1 repositories before trying to update setup packages? yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm Regards Martin On Fri, Feb 17, 2017 at 8:55 AM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: > I am following the three simple steps in the release notes here: > https://www.ovirt.org/release/4.1.0/ > > I have added the repo fine, and did a yum clean all just to be cautions. > > However, when I try to run the yum update "ovirt-*-setup*" command it > just returns no updates found. Likewise, if I even try to do a yum update > ovirt-engine-setup it returns no updates found. > > I am currently running oVirt 4.0.6.3-1.el7.centos on a CentOS machine. > I feel like I am missing something really simple here, but I can not get it > to update any packages beyond the 4.0 repos. I have even tried disabling > the 4.0 repos, but no luck. > > Any suggestions? > > > *Lynn Dixon* | Red Hat Certified Architect #100-006-188 > *Sr. Cloud Consultant* | Cloud Management Practice > Google Voice: 423-618-1414 <(423)%20618-1414> > Cell/Text: 423-774-3188 <(423)%20774-3188> > Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> > > > > _______________________________________________ > Devel mailing list > Devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/devel >

From repo : ovirt-4.0

So could you please share following output? yum info --show-duplicates ovirt-engine-setup On Fri, Feb 17, 2017 at 9:07 AM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: > Yes Martin, that was the first step I did. I have also double checked > that the 4.1 repo is enabled. > > *Lynn Dixon* | Red Hat Certified Architect #100-006-188 > *Sr. Cloud Consultant* | Cloud Management Practice > Google Voice: 423-618-1414 <%28423%29%20618-1414> > Cell/Text: 423-774-3188 <%28423%29%20774-3188> > Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> > > > > On Fri, Feb 17, 2017 at 3:07 AM, Martin Perina <mperina(a)redhat.com&gt; > wrote: > >> Hi, >> >> have you installed oVirt 4.1 repositories before trying to update setup >> packages? >> >> yum install http://resources.ovirt.org/pub >> /yum-repo/ovirt-release41.rpm >> >> Regards >> >> Martin >> >> On Fri, Feb 17, 2017 at 8:55 AM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >> >>> I am following the three simple steps in the release notes here: >>> https://www.ovirt.org/release/4.1.0/ >>> >>> I have added the repo fine, and did a yum clean all just to be cautions. >>> >>> However, when I try to run the yum update "ovirt-*-setup*" command it >>> just returns no updates found. Likewise, if I even try to do a yum update >>> ovirt-engine-setup it returns no updates found. >>> >>> I am currently running oVirt 4.0.6.3-1.el7.centos on a CentOS >>> machine. I feel like I am missing something really simple here, but I can >>> not get it to update any packages beyond the 4.0 repos. I have even tried >>> disabling the 4.0 repos, but no luck. >>> >>> Any suggestions? >>> >>> >>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>> *Sr. Cloud Consultant* | Cloud Management Practice >>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>> >>> >>> >>> _______________________________________________ >>> Devel mailing list >>> Devel(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/devel >>> >> >> >

On Fri, Feb 17, 2017 at 3:33 PM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: > Sure! here is the output: > > ---------------------------------------------------- > [root@tywin ~]# yum info --show-duplicates ovirt-engine-setup > Loaded plugins: langpacks, product-id, search-disabled-repos, > subscription-manager, versionlock > Repository virtio-win-stable is listed more than once in the configuration > centos-opstools-testing > | 2.9 kB 00:00:00 > centos-ovirt-common-candidate > | 3.4 kB 00:00:00 > centos-ovirt41-candidate > | 3.4 kB 00:00:00 > ovirt-4.0 > | 2.9 kB 00:00:00 > ​It's suspicious that you don't see ovirt-4.1 repo here, something happened to repository configuration provided by ovirt-release-41 package. If you execute: yum repoinfo enabled | grep Repo-id you should see following repositories: Repo-id : base/7/x86_64 Repo-id : centos-opstools-testing/x86_64 Repo-id : centos-ovirt-common-candidate/x86_64 Repo-id : centos-ovirt40-release/x86_64 Repo-id : centos-ovirt41-candidate/x86_64 Repo-id : centos-sclo-rh/x86_64 Repo-id : centos-sclo-sclo/x86_64 Repo-id : extras/7/x86_64 Repo-id : ovirt-4.0/7 Repo-id : ovirt-4.0-centos-gluster37/x86_64 Repo-id : ovirt-4.0-epel/x86_64 Repo-id : ovirt-4.0-patternfly1-noarch-epel/x86_64 Repo-id : ovirt-4.1/7 Repo-id : ovirt-4.1-centos-gluster38/x86_64 Repo-id : ovirt-4.1-epel/x86_64 Repo-id : ovirt-4.1-patternfly1-noarch-epel/x86_64 Repo-id : updates/7/x86_64 Repo-id : virtio-win-stable If not, please try following steps: yum remove ovirt-release41 yum clean all rm /etc/yum.repos.d/ovirt-4.1*.repo yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm yum check-update After those steps your repositories should be fine and you should see oVirt 4.1 packages. > ovirt-4.1-centos-gluster38 > | 2.9 kB 00:00:00 > ovirt-4.1-epel/x86_64/metalink > | 14 kB 00:00:00 > ovirt-4.1-patternfly1-noarch-epel > | 3.0 kB 00:00:00 > ovirt-4.1-centos-gluster38/x86_64/primary_db > | 80 kB 00:00:00 > Installed Packages > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.6.3 > Release : 1.el7.centos > Size : 11 k > Repo : installed > From repo : ovirt-4.0 > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Available Packages > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.0.6 > Release : 1.el7.centos > Size : 8.6 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.1.1 > Release : 1.el7.centos > Size : 8.7 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.2.6 > Release : 1.el7.centos > Size : 9.1 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.2.7 > Release : 1.el7.centos > Size : 9.2 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.3 > Release : 1.el7.centos > Size : 9.4 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.4.4 > Release : 1.el7.centos > Size : 9.8 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.5.5 > Release : 1.el7.centos > Size : 10 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > Name : ovirt-engine-setup > Arch : noarch > Version : 4.0.6.3 > Release : 1.el7.centos > Size : 10 k > Repo : ovirt-4.0/7Server > Summary : Setup and upgrade scripts for oVirt Engine > URL : http://www.ovirt.org > License : ASL 2.0 > Description : Setup and upgrade scripts for oVirt Engine > > ------------------------------------------------------------ > ------------------------------------------------ > > > > *Lynn Dixon* | Red Hat Certified Architect #100-006-188 > *Sr. Cloud Consultant* | Cloud Management Practice > Google Voice: 423-618-1414 <%28423%29%20618-1414> > Cell/Text: 423-774-3188 <%28423%29%20774-3188> > Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> > > > > On Fri, Feb 17, 2017 at 3:27 AM, Martin Perina <mperina(a)redhat.com&gt; > wrote: > >> So could you please share following output? >> >> yum info --show-duplicates ovirt-engine-setup >> >> >> On Fri, Feb 17, 2017 at 9:07 AM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >> >>> Yes Martin, that was the first step I did. I have also double checked >>> that the 4.1 repo is enabled. >>> >>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>> *Sr. Cloud Consultant* | Cloud Management Practice >>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>> >>> >>> >>> On Fri, Feb 17, 2017 at 3:07 AM, Martin Perina <mperina(a)redhat.com&gt; >>> wrote: >>> >>>> Hi, >>>> >>>> have you installed oVirt 4.1 repositories before trying to update >>>> setup packages? >>>> >>>> yum install http://resources.ovirt.org/pub >>>> /yum-repo/ovirt-release41.rpm >>>> >>>> Regards >>>> >>>> Martin >>>> >>>> On Fri, Feb 17, 2017 at 8:55 AM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >>>> >>>>> I am following the three simple steps in the release notes here: >>>>> https://www.ovirt.org/release/4.1.0/ >>>>> >>>>> I have added the repo fine, and did a yum clean all just to be >>>>> cautions. >>>>> >>>>> However, when I try to run the yum update "ovirt-*-setup*" command >>>>> it just returns no updates found. Likewise, if I even try to do a yum >>>>> update ovirt-engine-setup it returns no updates found. >>>>> >>>>> I am currently running oVirt 4.0.6.3-1.el7.centos on a CentOS >>>>> machine. I feel like I am missing something really simple here, but I can >>>>> not get it to update any packages beyond the 4.0 repos. I have even tried >>>>> disabling the 4.0 repos, but no luck. >>>>> >>>>> Any suggestions? >>>>> >>>>> >>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>>>> *Sr. Cloud Consultant* | Cloud Management Practice >>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>>>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Devel mailing list >>>>> Devel(a)ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/devel >>>>> >>>> >>>> >>> >> >

Hmm, strange. I've attached 4.1 repo files to the email, which should be installed by ovirt-release41. The most important repository which is somehow missing in your configuration is this one: [ovirt-4.1] name=Latest oVirt 4.1 Release #baseurl=http://resources.ovirt.org/pub/ovirt-4.1/rpm/el$releasever/ mirrorlist=http://resources.ovirt.org/pub/yum-repo/ mirrorlist-ovirt-4.1-el$releasever enabled=1 skip_if_unavailable=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.1 Could you please edit your /etc/yum.repos.d/ovirt-4.1*.repo files and change set skip_if_unavailable=0. Afterwards please execute yum check-update and we should see some error, why those repositories are not available on your machine. Thanks Martin On Fri, Feb 17, 2017 at 5:21 PM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: > Hmmm. > > Here is my repo-id info: > > -------------------------------------- > [root@tywin ~]# yum repoinfo enabled | grep Repo-id > Repository virtio-win-stable is listed more than once in the configuration > Repo-id : centos-opstools-testing/x86_64 > Repo-id : centos-ovirt-common-candidate/x86_64 > Repo-id : centos-ovirt41-candidate/x86_64 > Repo-id : ovirt-4.0/7Server > Repo-id : ovirt-4.1-centos-gluster38/x86_64 > Repo-id : ovirt-4.1-epel/x86_64 > Repo-id : ovirt-4.1-patternfly1-noarch-epel/x86_64 > Repo-id : qci-1.0-for-rhel-7-rpms/x86_64 > Repo-id : rhel-7-fast-datapath-rpms/7Server/x86_64 > Repo-id : rhel-7-server-extras-rpms/x86_64 > Repo-id : rhel-7-server-optional-rpms/7Server/x86_64 > Repo-id : rhel-7-server-rhev-mgmt-agent-rpms/7Server/x86_64 > Repo-id : rhel-7-server-rpms/7Server/x86_64 > Repo-id : rhel-7-server-tus-rpms/7Server/x86_64 > --------------------------------------------------------------------- > > I am using RHEL7 and not CentOS...sorry, but that shouldn't matter. > > > > I went ahead and followed your suggestions, removing, cleaning and > reinstalling. > > And here is the output from a yum check-update: > > ____________________________________________________________ > ________________ > [root@tywin ~]# yum check-update > Loaded plugins: langpacks, product-id, search-disabled-repos, > subscription-manager, versionlock > Repository virtio-win-stable is listed more than once in the configuration > centos-opstools-testing > > | 2.9 kB 00:00:00 > centos-ovirt-common-candidate > > | 3.4 kB 00:00:00 > centos-ovirt41-candidate > > | 3.4 kB 00:00:00 > ovirt-4.1-centos-gluster38 > > | 2.9 kB 00:00:00 > ovirt-4.1-epel/x86_64/metalink > > | 14 kB 00:00:00 > ovirt-4.1-epel > > | 4.3 kB 00:00:00 > ovirt-4.1-patternfly1-noarch-epel > > | 3.0 kB 00:00:00 > (1/8): centos-ovirt41-candidate/x86_64/primary_db > > | 38 kB 00:00:00 > (2/8): ovirt-4.1-epel/x86_64/group_gz > > | 170 kB 00:00:00 > (3/8): ovirt-4.1-centos-gluster38/x86_64/primary_db > > | 80 kB 00:00:00 > (4/8): centos-ovirt-common-candidate/x86_64/primary_db > > | 81 kB 00:00:00 > (5/8): ovirt-4.1-epel/x86_64/updateinfo > > | 735 kB 00:00:00 > (6/8): ovirt-4.1-epel/x86_64/primary_db > > | 4.5 MB 00:00:00 > (7/8): ovirt-4.1-patternfly1-noarch-epel/x86_64/primary_db > > | 2.2 kB 00:00:00 > (8/8): centos-opstools-testing/x86_64/primary_db > > | 124 kB 00:00:00 > > antlr-tool.noarch > 2.7.7-35.el7 > centos-ovirt-common-candidate > glusterfs.x86_64 > 3.8.9-1.el7 > ovirt-4.1-centos-gluster38 > glusterfs-api.x86_64 > 3.8.9-1.el7 > ovirt-4.1-centos-gluster38 > glusterfs-cli.x86_64 > 3.8.9-1.el7 > ovirt-4.1-centos-gluster38 > glusterfs-client-xlators.x86_64 > 3.8.9-1.el7 > ovirt-4.1-centos-gluster38 > glusterfs-fuse.x86_64 > 3.8.9-1.el7 > ovirt-4.1-centos-gluster38 > glusterfs-libs.x86_64 > 3.8.9-1.el7 > ovirt-4.1-centos-gluster38 > openvswitch.x86_64 > 2.6.90-1.el7 > centos-ovirt41-candidate > otopi.noarch > 1.6.0-1.el7 > centos-ovirt41-candidate > otopi-java.noarch > 1.6.0-1.el7 > centos-ovirt41-candidate > ovirt-host-deploy.noarch > 1.6.0-1.el7 > centos-ovirt41-candidate > ovirt-host-deploy-java.noarch > 1.6.0-1.el7 > centos-ovirt41-candidate > ovirt-imageio-common.noarch > 1.0.0-1.el7 > centos-ovirt41-candidate > ovirt-imageio-daemon.noarch > 1.0.0-1.el7 > centos-ovirt41-candidate > ovirt-setup-lib.noarch > 1.1.0-1.el7 > centos-ovirt41-candidate > python-ovirt-engine-sdk4.x86_64 > 4.1.0-1.el7 > centos-ovirt41-candidate > vdsm.x86_64 > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-api.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-cli.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-hook-macspoof.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-hook-nestedvt.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-hook-vmfex-dev.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-jsonrpc.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-jsonrpc-java.noarch > 1.3.8-1.el7 > centos-ovirt41-candidate > vdsm-python.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-xmlrpc.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > vdsm-yajsonrpc.noarch > 4.19.4-1.el7 > centos-ovirt41-candidate > > ____________________________________________________________ > _______________________________________________________________ > > It's showing that there are indeed some updated packages, and coming from > the 4.1 repos, but none of the ones listed are for the engine-setup. > > > > > > *Lynn Dixon* | Red Hat Certified Architect #100-006-188 > *Sr. Cloud Consultant* | Cloud Management Practice > Google Voice: 423-618-1414 <(423)%20618-1414> > Cell/Text: 423-774-3188 <(423)%20774-3188> > Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> > > > > On Fri, Feb 17, 2017 at 10:55 AM, Martin Perina <mperina(a)redhat.com&gt; > wrote: > >> >> >> On Fri, Feb 17, 2017 at 3:33 PM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >> >>> Sure! here is the output: >>> >>> ---------------------------------------------------- >>> [root@tywin ~]# yum info --show-duplicates ovirt-engine-setup >>> Loaded plugins: langpacks, product-id, search-disabled-repos, >>> subscription-manager, versionlock >>> Repository virtio-win-stable is listed more than once in the >>> configuration >>> centos-opstools-testing >>> | 2.9 kB 00:00:00 >>> centos-ovirt-common-candidate >>> | 3.4 kB 00:00:00 >>> centos-ovirt41-candidate >>> | 3.4 kB 00:00:00 >>> ovirt-4.0 >>> | 2.9 kB 00:00:00 >>> >> >> ​It's suspicious that you don't see ovirt-4.1 repo here, something >> happened to repository configuration provided by ovirt-release-41 package. >> If you execute: >> >> yum repoinfo enabled | grep Repo-id >> >> you should see following repositories: >> >> Repo-id : base/7/x86_64 >> Repo-id : centos-opstools-testing/x86_64 >> Repo-id : centos-ovirt-common-candidate/x86_64 >> Repo-id : centos-ovirt40-release/x86_64 >> Repo-id : centos-ovirt41-candidate/x86_64 >> Repo-id : centos-sclo-rh/x86_64 >> Repo-id : centos-sclo-sclo/x86_64 >> Repo-id : extras/7/x86_64 >> Repo-id : ovirt-4.0/7 >> Repo-id : ovirt-4.0-centos-gluster37/x86_64 >> Repo-id : ovirt-4.0-epel/x86_64 >> Repo-id : ovirt-4.0-patternfly1-noarch-epel/x86_64 >> Repo-id : ovirt-4.1/7 >> Repo-id : ovirt-4.1-centos-gluster38/x86_64 >> Repo-id : ovirt-4.1-epel/x86_64 >> Repo-id : ovirt-4.1-patternfly1-noarch-epel/x86_64 >> Repo-id : updates/7/x86_64 >> Repo-id : virtio-win-stable >> >> If not, please try following steps: >> >> yum remove ovirt-release41 >> yum clean all >> rm /etc/yum.repos.d/ovirt-4.1*.repo >> yum install http://resources.ovirt.org/pub >> /yum-repo/ovirt-release41.rpm >> yum check-update >> >> After those steps your repositories should be fine and you should see >> oVirt 4.1 packages. >> >> >>> ovirt-4.1-centos-gluster38 >>> | 2.9 kB 00:00:00 >>> ovirt-4.1-epel/x86_64/metalink >>> | 14 kB 00:00:00 >>> ovirt-4.1-patternfly1-noarch-epel >>> | 3.0 kB 00:00:00 >>> ovirt-4.1-centos-gluster38/x86_64/primary_db >>> | 80 kB 00:00:00 >>> Installed Packages >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.6.3 >>> Release : 1.el7.centos >>> Size : 11 k >>> Repo : installed >>> From repo : ovirt-4.0 >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Available Packages >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.0.6 >>> Release : 1.el7.centos >>> Size : 8.6 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.1.1 >>> Release : 1.el7.centos >>> Size : 8.7 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.2.6 >>> Release : 1.el7.centos >>> Size : 9.1 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.2.7 >>> Release : 1.el7.centos >>> Size : 9.2 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.3 >>> Release : 1.el7.centos >>> Size : 9.4 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.4.4 >>> Release : 1.el7.centos >>> Size : 9.8 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.5.5 >>> Release : 1.el7.centos >>> Size : 10 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> Name : ovirt-engine-setup >>> Arch : noarch >>> Version : 4.0.6.3 >>> Release : 1.el7.centos >>> Size : 10 k >>> Repo : ovirt-4.0/7Server >>> Summary : Setup and upgrade scripts for oVirt Engine >>> URL : http://www.ovirt.org >>> License : ASL 2.0 >>> Description : Setup and upgrade scripts for oVirt Engine >>> >>> ------------------------------------------------------------ >>> ------------------------------------------------ >>> >>> >>> >>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>> *Sr. Cloud Consultant* | Cloud Management Practice >>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>> >>> >>> >>> On Fri, Feb 17, 2017 at 3:27 AM, Martin Perina <mperina(a)redhat.com&gt; >>> wrote: >>> >>>> So could you please share following output? >>>> >>>> yum info --show-duplicates ovirt-engine-setup >>>> >>>> >>>> On Fri, Feb 17, 2017 at 9:07 AM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >>>> >>>>> Yes Martin, that was the first step I did. I have also double >>>>> checked that the 4.1 repo is enabled. >>>>> >>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>>>> *Sr. Cloud Consultant* | Cloud Management Practice >>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>>>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>>>> >>>>> >>>>> >>>>> On Fri, Feb 17, 2017 at 3:07 AM, Martin Perina <mperina(a)redhat.com&gt; >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> have you installed oVirt 4.1 repositories before trying to update >>>>>> setup packages? >>>>>> >>>>>> yum install http://resources.ovirt.org/pub >>>>>> /yum-repo/ovirt-release41.rpm >>>>>> >>>>>> Regards >>>>>> >>>>>> Martin >>>>>> >>>>>> On Fri, Feb 17, 2017 at 8:55 AM, Lynn Dixon <ldixon(a)redhat.com&gt; >>>>>> wrote: >>>>>> >>>>>>> I am following the three simple steps in the release notes here: >>>>>>> https://www.ovirt.org/release/4.1.0/ >>>>>>> >>>>>>> I have added the repo fine, and did a yum clean all just to be >>>>>>> cautions. >>>>>>> >>>>>>> However, when I try to run the yum update "ovirt-*-setup*" command >>>>>>> it just returns no updates found. Likewise, if I even try to do a yum >>>>>>> update ovirt-engine-setup it returns no updates found. >>>>>>> >>>>>>> I am currently running oVirt 4.0.6.3-1.el7.centos on a CentOS >>>>>>> machine. I feel like I am missing something really simple here, but I can >>>>>>> not get it to update any packages beyond the 4.0 repos. I have even tried >>>>>>> disabling the 4.0 repos, but no luck. >>>>>>> >>>>>>> Any suggestions? >>>>>>> >>>>>>> >>>>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>>>>>> *Sr. Cloud Consultant* | Cloud Management Practice >>>>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>>>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>>>>>> Click here to view my Certification Portfolio >>>>>>> <http://red.ht/1XMX2Mi> >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devel mailing list >>>>>>> Devel(a)ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/devel >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >

Ahh, now I finally see the issue: on Centos $releasever is always expanded to major release number (7 in this case). But on downstream RHEL it's expanded to 7Server or 7Workstation depending on your installation. To fix your issue locally please replace 'el$releasever' with 'el7': cd /etc/yum.repos.d/ mv ovirt-4.1.repo ovirt-4.1.xxx mv ovirt-4.1-dependencies.repo ovirt-4.1-dependencies.xxx cat ovirt-4.1.xxx | sed 's/el\$releasever/el7/g' > ovirt-4.1.repo cat ovirt-4.1-dependencies.xxx | sed 's/el\$releasever/el7/g' > ovirt-4.1-dependencies.repo rm ovirt-4.1.xxx rm ovirt-4.1-dependencies.xxx @Sandro, can we fix that issue permanently for all existing ovirt-release* files? Thanks Martin On Fri, Feb 17, 2017 at 5:56 PM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: > Martin, > I have verified that the ovirt-4.1 repos is configured exactly in my repo > file as you mentioned. > > I also made the changes for skip_if_unavailable=0 and got this error when > I tried to do yum check-update (see below) > > I have also attached my 4.1 repo files in this email just to be sure > > ------------------------------------------------------------ > [root@tywin yum.repos.d]# yum check-update > Loaded plugins: langpacks, product-id, search-disabled-repos, > subscription-manager, versionlock > Repository virtio-win-stable is listed more than once in the configuration > centos-opstools-testing > > | 2.9 kB 00:00:00 > centos-ovirt-common-candidate > > | 3.4 kB 00:00:00 > centos-ovirt41-candidate > > | 3.4 kB 00:00:00 > > > One of the configured repositories failed (Unknown), > and yum doesn't have enough cached data to continue. At this point the > only > safe thing yum can do is fail. There are a few ways to work "fix" this: > > 1. Contact the upstream for the repository and get them to fix the > problem. > > 2. Reconfigure the baseurl/etc. for the repository, to point to a > working > upstream. This is most often useful if you are using a newer > distribution release than is supported by the repository (and the > packages for the previous distribution release still work). > > 3. Run the command with the repository temporarily disabled > yum --disablerepo=<repoid> ... > > 4. Disable the repository permanently, so yum won't use it by > default. Yum > will then just ignore the repository until you permanently enable > it > again or use --enablerepo for temporary usage: > > yum-config-manager --disable <repoid> > or > subscription-manager repos --disable=<repoid> > > 5. Configure the failing repository to be skipped, if it is > unavailable. > Note that yum will try to contact the repo. when it runs most > commands, > so will have to try and fail each time (and thus. yum will be be > much > slower). If it is a very temporary problem though, this is often > a nice > compromise: > > yum-config-manager --save --setopt=<repoid>.skip_if_unav > ailable=true > > Cannot find a valid baseurl for repo: ovirt-4.1/7Server > ------------------------------------------------------------ > ------------------------ > > > > *Lynn Dixon* | Red Hat Certified Architect #100-006-188 > *Sr. Cloud Consultant* | Cloud Management Practice > Google Voice: 423-618-1414 <(423)%20618-1414> > Cell/Text: 423-774-3188 <(423)%20774-3188> > Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> > > > > On Fri, Feb 17, 2017 at 11:33 AM, Martin Perina <mperina(a)redhat.com&gt; > wrote: > >> Hmm, strange. I've attached 4.1 repo files to the email, which should be >> installed by ovirt-release41. The most important repository which is >> somehow missing in your configuration is this one: >> >> [ovirt-4.1] >> name=Latest oVirt 4.1 Release >> #baseurl=http://resources.ovirt.org/pub/ovirt-4.1/rpm/el$releasever/ >> mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlis >> t-ovirt-4.1-el$releasever >> enabled=1 >> skip_if_unavailable=1 >> gpgcheck=1 >> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.1 >> >> >> Could you please edit your /etc/yum.repos.d/ovirt-4.1*.repo files and >> change set skip_if_unavailable=0. Afterwards please execute yum >> check-update and we should see some error, why those repositories are not >> available on your machine. >> >> Thanks >> >> Martin >> >> >> On Fri, Feb 17, 2017 at 5:21 PM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >> >>> Hmmm. >>> >>> Here is my repo-id info: >>> >>> -------------------------------------- >>> [root@tywin ~]# yum repoinfo enabled | grep Repo-id >>> Repository virtio-win-stable is listed more than once in the >>> configuration >>> Repo-id : centos-opstools-testing/x86_64 >>> Repo-id : centos-ovirt-common-candidate/x86_64 >>> Repo-id : centos-ovirt41-candidate/x86_64 >>> Repo-id : ovirt-4.0/7Server >>> Repo-id : ovirt-4.1-centos-gluster38/x86_64 >>> Repo-id : ovirt-4.1-epel/x86_64 >>> Repo-id : ovirt-4.1-patternfly1-noarch-epel/x86_64 >>> Repo-id : qci-1.0-for-rhel-7-rpms/x86_64 >>> Repo-id : rhel-7-fast-datapath-rpms/7Server/x86_64 >>> Repo-id : rhel-7-server-extras-rpms/x86_64 >>> Repo-id : rhel-7-server-optional-rpms/7Server/x86_64 >>> Repo-id : rhel-7-server-rhev-mgmt-agent-rpms/7Server/x86_64 >>> Repo-id : rhel-7-server-rpms/7Server/x86_64 >>> Repo-id : rhel-7-server-tus-rpms/7Server/x86_64 >>> --------------------------------------------------------------------- >>> >>> I am using RHEL7 and not CentOS...sorry, but that shouldn't matter. >>> >>> >>> >>> I went ahead and followed your suggestions, removing, cleaning and >>> reinstalling. >>> >>> And here is the output from a yum check-update: >>> >>> ____________________________________________________________ >>> ________________ >>> [root@tywin ~]# yum check-update >>> Loaded plugins: langpacks, product-id, search-disabled-repos, >>> subscription-manager, versionlock >>> Repository virtio-win-stable is listed more than once in the >>> configuration >>> centos-opstools-testing >>> >>> | 2.9 kB 00:00:00 >>> centos-ovirt-common-candidate >>> >>> | 3.4 kB 00:00:00 >>> centos-ovirt41-candidate >>> >>> | 3.4 kB 00:00:00 >>> ovirt-4.1-centos-gluster38 >>> >>> | 2.9 kB 00:00:00 >>> ovirt-4.1-epel/x86_64/metalink >>> >>> | 14 kB 00:00:00 >>> ovirt-4.1-epel >>> >>> | 4.3 kB 00:00:00 >>> ovirt-4.1-patternfly1-noarch-epel >>> >>> | 3.0 kB 00:00:00 >>> (1/8): centos-ovirt41-candidate/x86_64/primary_db >>> >>> | 38 kB 00:00:00 >>> (2/8): ovirt-4.1-epel/x86_64/group_gz >>> >>> | 170 kB 00:00:00 >>> (3/8): ovirt-4.1-centos-gluster38/x86_64/primary_db >>> >>> | 80 kB 00:00:00 >>> (4/8): centos-ovirt-common-candidate/x86_64/primary_db >>> >>> | 81 kB 00:00:00 >>> (5/8): ovirt-4.1-epel/x86_64/updateinfo >>> >>> | 735 kB 00:00:00 >>> (6/8): ovirt-4.1-epel/x86_64/primary_db >>> >>> | 4.5 MB 00:00:00 >>> (7/8): ovirt-4.1-patternfly1-noarch-epel/x86_64/primary_db >>> >>> | 2.2 kB 00:00:00 >>> (8/8): centos-opstools-testing/x86_64/primary_db >>> >>> | 124 kB 00:00:00 >>> >>> antlr-tool.noarch >>> 2.7.7-35.el7 >>> centos-ovirt-common-candidate >>> glusterfs.x86_64 >>> 3.8.9-1.el7 >>> ovirt-4.1-centos-gluster38 >>> glusterfs-api.x86_64 >>> 3.8.9-1.el7 >>> ovirt-4.1-centos-gluster38 >>> glusterfs-cli.x86_64 >>> 3.8.9-1.el7 >>> ovirt-4.1-centos-gluster38 >>> glusterfs-client-xlators.x86_64 >>> 3.8.9-1.el7 >>> ovirt-4.1-centos-gluster38 >>> glusterfs-fuse.x86_64 >>> 3.8.9-1.el7 >>> ovirt-4.1-centos-gluster38 >>> glusterfs-libs.x86_64 >>> 3.8.9-1.el7 >>> ovirt-4.1-centos-gluster38 >>> openvswitch.x86_64 >>> 2.6.90-1.el7 >>> centos-ovirt41-candidate >>> otopi.noarch >>> 1.6.0-1.el7 >>> centos-ovirt41-candidate >>> otopi-java.noarch >>> 1.6.0-1.el7 >>> centos-ovirt41-candidate >>> ovirt-host-deploy.noarch >>> 1.6.0-1.el7 >>> centos-ovirt41-candidate >>> ovirt-host-deploy-java.noarch >>> 1.6.0-1.el7 >>> centos-ovirt41-candidate >>> ovirt-imageio-common.noarch >>> 1.0.0-1.el7 >>> centos-ovirt41-candidate >>> ovirt-imageio-daemon.noarch >>> 1.0.0-1.el7 >>> centos-ovirt41-candidate >>> ovirt-setup-lib.noarch >>> 1.1.0-1.el7 >>> centos-ovirt41-candidate >>> python-ovirt-engine-sdk4.x86_64 >>> 4.1.0-1.el7 >>> centos-ovirt41-candidate >>> vdsm.x86_64 >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-api.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-cli.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-hook-macspoof.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-hook-nestedvt.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-hook-vmfex-dev.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-jsonrpc.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-jsonrpc-java.noarch >>> 1.3.8-1.el7 >>> centos-ovirt41-candidate >>> vdsm-python.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-xmlrpc.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> vdsm-yajsonrpc.noarch >>> 4.19.4-1.el7 >>> centos-ovirt41-candidate >>> >>> ____________________________________________________________ >>> _______________________________________________________________ >>> >>> It's showing that there are indeed some updated packages, and coming >>> from the 4.1 repos, but none of the ones listed are for the engine-setup. >>> >>> >>> >>> >>> >>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>> *Sr. Cloud Consultant* | Cloud Management Practice >>> Google Voice: 423-618-1414 <(423)%20618-1414> >>> Cell/Text: 423-774-3188 <(423)%20774-3188> >>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>> >>> >>> >>> On Fri, Feb 17, 2017 at 10:55 AM, Martin Perina <mperina(a)redhat.com&gt; >>> wrote: >>> >>>> >>>> >>>> On Fri, Feb 17, 2017 at 3:33 PM, Lynn Dixon <ldixon(a)redhat.com&gt; wrote: >>>> >>>>> Sure! here is the output: >>>>> >>>>> ---------------------------------------------------- >>>>> [root@tywin ~]# yum info --show-duplicates ovirt-engine-setup >>>>> Loaded plugins: langpacks, product-id, search-disabled-repos, >>>>> subscription-manager, versionlock >>>>> Repository virtio-win-stable is listed more than once in the >>>>> configuration >>>>> centos-opstools-testing >>>>> | 2.9 kB 00:00:00 >>>>> centos-ovirt-common-candidate >>>>> | 3.4 kB 00:00:00 >>>>> centos-ovirt41-candidate >>>>> | 3.4 kB 00:00:00 >>>>> ovirt-4.0 >>>>> | 2.9 kB 00:00:00 >>>>> >>>> >>>> ​It's suspicious that you don't see ovirt-4.1 repo here, something >>>> happened to repository configuration provided by ovirt-release-41 package. >>>> If you execute: >>>> >>>> yum repoinfo enabled | grep Repo-id >>>> >>>> you should see following repositories: >>>> >>>> Repo-id : base/7/x86_64 >>>> Repo-id : centos-opstools-testing/x86_64 >>>> Repo-id : centos-ovirt-common-candidate/x86_64 >>>> Repo-id : centos-ovirt40-release/x86_64 >>>> Repo-id : centos-ovirt41-candidate/x86_64 >>>> Repo-id : centos-sclo-rh/x86_64 >>>> Repo-id : centos-sclo-sclo/x86_64 >>>> Repo-id : extras/7/x86_64 >>>> Repo-id : ovirt-4.0/7 >>>> Repo-id : ovirt-4.0-centos-gluster37/x86_64 >>>> Repo-id : ovirt-4.0-epel/x86_64 >>>> Repo-id : ovirt-4.0-patternfly1-noarch-epel/x86_64 >>>> Repo-id : ovirt-4.1/7 >>>> Repo-id : ovirt-4.1-centos-gluster38/x86_64 >>>> Repo-id : ovirt-4.1-epel/x86_64 >>>> Repo-id : ovirt-4.1-patternfly1-noarch-epel/x86_64 >>>> Repo-id : updates/7/x86_64 >>>> Repo-id : virtio-win-stable >>>> >>>> If not, please try following steps: >>>> >>>> yum remove ovirt-release41 >>>> yum clean all >>>> rm /etc/yum.repos.d/ovirt-4.1*.repo >>>> yum install http://resources.ovirt.org/pub >>>> /yum-repo/ovirt-release41.rpm >>>> yum check-update >>>> >>>> After those steps your repositories should be fine and you should see >>>> oVirt 4.1 packages. >>>> >>>> >>>>> ovirt-4.1-centos-gluster38 >>>>> | 2.9 kB 00:00:00 >>>>> ovirt-4.1-epel/x86_64/metalink >>>>> | 14 kB 00:00:00 >>>>> ovirt-4.1-patternfly1-noarch-epel >>>>> | 3.0 kB 00:00:00 >>>>> ovirt-4.1-centos-gluster38/x86_64/primary_db >>>>> | 80 kB 00:00:00 >>>>> Installed Packages >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.6.3 >>>>> Release : 1.el7.centos >>>>> Size : 11 k >>>>> Repo : installed >>>>> From repo : ovirt-4.0 >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Available Packages >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.0.6 >>>>> Release : 1.el7.centos >>>>> Size : 8.6 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.1.1 >>>>> Release : 1.el7.centos >>>>> Size : 8.7 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.2.6 >>>>> Release : 1.el7.centos >>>>> Size : 9.1 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.2.7 >>>>> Release : 1.el7.centos >>>>> Size : 9.2 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.3 >>>>> Release : 1.el7.centos >>>>> Size : 9.4 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.4.4 >>>>> Release : 1.el7.centos >>>>> Size : 9.8 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.5.5 >>>>> Release : 1.el7.centos >>>>> Size : 10 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> Name : ovirt-engine-setup >>>>> Arch : noarch >>>>> Version : 4.0.6.3 >>>>> Release : 1.el7.centos >>>>> Size : 10 k >>>>> Repo : ovirt-4.0/7Server >>>>> Summary : Setup and upgrade scripts for oVirt Engine >>>>> URL : http://www.ovirt.org >>>>> License : ASL 2.0 >>>>> Description : Setup and upgrade scripts for oVirt Engine >>>>> >>>>> ------------------------------------------------------------ >>>>> ------------------------------------------------ >>>>> >>>>> >>>>> >>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>>>> *Sr. Cloud Consultant* | Cloud Management Practice >>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>>>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi> >>>>> >>>>> >>>>> >>>>> On Fri, Feb 17, 2017 at 3:27 AM, Martin Perina <mperina(a)redhat.com&gt; >>>>> wrote: >>>>> >>>>>> So could you please share following output? >>>>>> >>>>>> yum info --show-duplicates ovirt-engine-setup >>>>>> >>>>>> >>>>>> On Fri, Feb 17, 2017 at 9:07 AM, Lynn Dixon <ldixon(a)redhat.com&gt; >>>>>> wrote: >>>>>> >>>>>>> Yes Martin, that was the first step I did. I have also double >>>>>>> checked that the 4.1 repo is enabled. >>>>>>> >>>>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>>>>>> *Sr. Cloud Consultant* | Cloud Management Practice >>>>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>>>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>>>>>> Click here to view my Certification Portfolio >>>>>>> <http://red.ht/1XMX2Mi> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, Feb 17, 2017 at 3:07 AM, Martin Perina <mperina(a)redhat.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> have you installed oVirt 4.1 repositories before trying to update >>>>>>>> setup packages? >>>>>>>> >>>>>>>> yum install http://resources.ovirt.org/pub >>>>>>>> /yum-repo/ovirt-release41.rpm >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Martin >>>>>>>> >>>>>>>> On Fri, Feb 17, 2017 at 8:55 AM, Lynn Dixon <ldixon(a)redhat.com&gt; >>>>>>>> wrote: >>>>>>>> >>>>>>>>> I am following the three simple steps in the release notes here: >>>>>>>>> https://www.ovirt.org/release/4.1.0/ >>>>>>>>> >>>>>>>>> I have added the repo fine, and did a yum clean all just to be >>>>>>>>> cautions. >>>>>>>>> >>>>>>>>> However, when I try to run the yum update "ovirt-*-setup*" >>>>>>>>> command it just returns no updates found. Likewise, if I even try to do a >>>>>>>>> yum update ovirt-engine-setup it returns no updates found. >>>>>>>>> >>>>>>>>> I am currently running oVirt 4.0.6.3-1.el7.centos on a CentOS >>>>>>>>> machine. I feel like I am missing something really simple here, but I can >>>>>>>>> not get it to update any packages beyond the 4.0 repos. I have even tried >>>>>>>>> disabling the 4.0 repos, but no luck. >>>>>>>>> >>>>>>>>> Any suggestions? >>>>>>>>> >>>>>>>>> >>>>>>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188 >>>>>>>>> *Sr. Cloud Consultant* | Cloud Management Practice >>>>>>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414> >>>>>>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188> >>>>>>>>> Click here to view my Certification Portfolio >>>>>>>>> <http://red.ht/1XMX2Mi> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Devel mailing list >>>>>>>>> Devel(a)ovirt.org >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/devel >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >

I am following the three simple steps in the release notes here: https://www.ovirt.org/release/4.1.0/ I have added the repo fine, and did a yum clean all just to be cautions. However, when I try to run the yum update "ovirt-*-setup*" command it just returns no updates found.

Likewise, if I even try to do a yum update ovirt-engine-setup it returns no updates found.

I am currently running oVirt 4.0.6.3-1.el7.centos on a CentOS machine. I feel like I am missing something really simple here, but I can not get it to update any packages beyond the 4.0 repos. I have even tried disabling the 4.0 repos, but no luck. Any suggestions?

Lynn Dixon | Red Hat Certified Architect #100-006-188 Sr. Cloud Consultant | Cloud Management Practice Google Voice: 423-618-1414 Cell/Text: 423-774-3188 Click here to view my Certification Portfolio _______________________________________________ Devel mailing list Devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/devel