2:15 a.m.
There are some small problems in i18n packaging. Through commit bd98489
adds i18n.json.tmpl to Makefile.am, it forgets to add it to RPM spec.
This patch adds i18n.json.tmpl to RPM spec files.
Another problem is that plugin/sample/po/Makefile.in.in is linked to
po/Makefile.in.in, so it would install the sample.mo to the system by
default. This patch copies po/Makefile.in.in to plugin/sample/po, and
change the install/uninstall target to skip installing and uninstalling
the sample mo files.
The last problem is that plugins/sample/config.status is needed by
plugin/sample/po/Makefile.in.in to create the actual Makefile. In git
source code repo it is a soft link to top level config.status, but it
didn't gets distributed in the tar ball. This patch adds this soft link
file to the dist tar ball.
To test this patch, firstly run the following commands.
make && make dist
Then
./autogen && make && make rpm
Signed-off-by: Zhou Zheng Sheng <zhshzhou(a)linux.vnet.ibm.com>
---
contrib/kimchi.spec.fedora.in | 2 +-
contrib/kimchi.spec.suse.in | 2 +-
plugins/sample/Makefile.am | 2 +-
plugins/sample/po/Makefile.in.in | 401 ++++++++++++++++++++++++++++++++++++++-
4 files changed, 403 insertions(+), 4 deletions(-)
mode change 120000 => 100644 plugins/sample/po/Makefile.in.in
diff --git a/contrib/kimchi.spec.fedora.in b/contrib/kimchi.spec.fedora.in
index 2d4699b..cb8c4c7 100644
--- a/contrib/kimchi.spec.fedora.in
+++ b/contrib/kimchi.spec.fedora.in
@@ -177,7 +177,7 @@ rm -rf $RPM_BUILD_ROOT
%{_datadir}/kimchi/ui/libs/themes/base/images/*.png
%{_datadir}/kimchi/ui/libs/themes/base/images/*.gif
%{_datadir}/kimchi/ui/libs/themes/base/jquery-ui.min.css
-%{_datadir}/kimchi/ui/pages/*.html.tmpl
+%{_datadir}/kimchi/ui/pages/*.tmpl
%{_datadir}/kimchi/ui/pages/help/*/*.html
%{_datadir}/kimchi/ui/pages/tabs/*.html.tmpl
%{_datadir}/kimchi/ui/pages/websockify/*.html
diff --git a/contrib/kimchi.spec.suse.in b/contrib/kimchi.spec.suse.in
index 165f566..1de8804 100644
--- a/contrib/kimchi.spec.suse.in
+++ b/contrib/kimchi.spec.suse.in
@@ -99,7 +99,7 @@ rm -rf $RPM_BUILD_ROOT
%{_datadir}/kimchi/ui/libs/themes/base/images/*.png
%{_datadir}/kimchi/ui/libs/themes/base/images/*.gif
%{_datadir}/kimchi/ui/libs/themes/base/jquery-ui.min.css
-%{_datadir}/kimchi/ui/pages/*.html.tmpl
+%{_datadir}/kimchi/ui/pages/*.tmpl
%{_datadir}/kimchi/ui/pages/help/*/*.html
%{_datadir}/kimchi/ui/pages/tabs/*.html.tmpl
%{_datadir}/kimchi/ui/pages/websockify/*.html
diff --git a/plugins/sample/Makefile.am b/plugins/sample/Makefile.am
index d753ac9..876ab54 100644
--- a/plugins/sample/Makefile.am
+++ b/plugins/sample/Makefile.am
@@ -19,7 +19,7 @@
SUBDIRS = ui po
-EXTRA_DIST = API.json sample.conf.in $(wildcard *.py)
+EXTRA_DIST = API.json sample.conf.in $(wildcard *.py) config.status
all-local:
while read L && test -n "$$L"; do \
diff --git a/plugins/sample/po/Makefile.in.in b/plugins/sample/po/Makefile.in.in
deleted file mode 120000
index 44028c0..0000000
--- a/plugins/sample/po/Makefile.in.in
+++ /dev/null
@@ -1 +0,0 @@
-../../../po/Makefile.in.in
\ No newline at end of file
diff --git a/plugins/sample/po/Makefile.in.in b/plugins/sample/po/Makefile.in.in
new file mode 100644
index 0000000..0eb3dda
--- /dev/null
+++ b/plugins/sample/po/Makefile.in.in
@@ -0,0 +1,400 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper
<drepper(a)gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.18
+GETTEXT_MACRO_VERSION = 0.18
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @datadir@/kimchi/mo
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(MKDIR_P).
+# This macro uses the 'mkdir -p' command if possible. Otherwise, it falls back
+# on invoking install-sh with the -d option, so your package should contain
+# install-sh as described under AC_PROG_INSTALL.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+MKDIR_P = @MKDIR_P@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in gen-pot \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir)
&& "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose
-o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics
--verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: check-macro-version update-gmo all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+check-macro-version:
+ @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in
from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext
version @GETTEXT_MACRO_VERSION@" 1>&2; \
+ exit 1; \
+ }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in
+ $(srcdir)/gen-pot $(POTFILES)
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an
update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd
$(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po
$(DOMAIN).pot"; \
+ cd $(srcdir) \
+ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e
's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po
$(DOMAIN).pot;; \
+ esac; \
+ }; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install:
+
+install-exec:
+install-data: install-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(MKDIR_P) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(MKDIR_P) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc
2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed
-e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo
2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo
$(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo
$(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as
$(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(MKDIR_P) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(MKDIR_P) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc
2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed
-e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall:
+
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it
through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then
PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir)
&& "; \
+ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po
$(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po
$(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po
$$lang.po $(DOMAIN).pot;; \
+ esac; \
+ }; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to
$$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--
1.9.3