[Kimchi-devel] [PATCH 02/15] V4 Ginger Base : base folder files part 1

From: chandrureddy <chandra(a)linux.vnet.ibm.com&gt; --- src/wok/plugins/gingerbase/API.json | 175 ++++++++ src/wok/plugins/gingerbase/INSTALL | 369 ++++++++++++++++ src/wok/plugins/gingerbase/Makefile.am | 155 +++++++ src/wok/plugins/gingerbase/VERSION | 1 + src/wok/plugins/gingerbase/__init__.py | 21 + src/wok/plugins/gingerbase/autogen.sh | 21 + src/wok/plugins/gingerbase/config.py.in | 59 +++ src/wok/plugins/gingerbase/config.rpath | 672 +++++++++++++++++++++++++++++ src/wok/plugins/gingerbase/configure.ac | 103 +++++ src/wok/plugins/gingerbase/gingerbase.conf | 31 ++ src/wok/plugins/gingerbase/gingerbase.py | 61 +++ src/wok/plugins/gingerbase/lscpu.py | 126 ++++++ src/wok/plugins/gingerbase/mockmodel.py | 296 +++++++++++++ 13 files changed, 2090 insertions(+) create mode 100644 src/wok/plugins/gingerbase/API.json create mode 100644 src/wok/plugins/gingerbase/INSTALL create mode 100644 src/wok/plugins/gingerbase/Makefile.am create mode 100644 src/wok/plugins/gingerbase/VERSION create mode 100644 src/wok/plugins/gingerbase/__init__.py create mode 100755 src/wok/plugins/gingerbase/autogen.sh create mode 100644 src/wok/plugins/gingerbase/config.py.in create mode 100644 src/wok/plugins/gingerbase/config.rpath create mode 100644 src/wok/plugins/gingerbase/configure.ac create mode 100644 src/wok/plugins/gingerbase/gingerbase.conf create mode 100644 src/wok/plugins/gingerbase/gingerbase.py create mode 100644 src/wok/plugins/gingerbase/lscpu.py create mode 100644 src/wok/plugins/gingerbase/mockmodel.py diff --git a/src/wok/plugins/gingerbase/API.json b/src/wok/plugins/gingerbase/API.json new file mode 100644 index 0000000..7b77eac --- /dev/null +++ b/src/wok/plugins/gingerbase/API.json @@ -0,0 +1,175 @@ +{ + "$schema": "http://json-schema.org/draft-03/schema#", + "title": "Ginger Base API", + "description": "Json schema for Gigner Base API", + "type": "object", + "gingerbasetype": { + "cpu_info": { + "description": "Configure CPU specifics for a VM.", + "type": "object", + "properties": { + "topology": { + "description": "Configure the guest CPU topology.", + "type": "object", + "properties": { + "sockets": { + "type": "integer", + "required": true, + "minimum": 1, + "error": "GGBHOST0005E" + }, + "cores": { + "type": "integer", + "required": true, + "minimum": 1, + "error": "GGBHOST0005E" + }, + "threads": { + "type": "integer", + "required": true, + "minimum": 1, + "error": "GGBHOST0005E" + } + } + } + } + } + }, + "properties": { + "debugreports_create": { + "type": "object", + "error": "GGBDR0006E", + "properties": { + "name": { + "description": "The name for the debug report file.", + "type": "string", + "pattern": "^[_A-Za-z0-9-]*$", + "error": "GGBDR0007E" + } + } + }, + "debugreport_update": { + "type": "object", + "properties": { + "name": { + "description": "New name of debug report", + "type": "string", + "pattern": "^[_A-Za-z0-9-]*$", + "error": "GGBDR0007E" + } + }, + "additionalProperties": false + }, + "repositories_create": { + "type": "object", + "properties": { + "repo_id": { + "description": "Repository ID used for YUM repository.", + "type": "string", + "error": "GGBREPOS0001E" + }, + "baseurl": { + "description": "URL to the directory where the repodata directory of a repository is located. Can be an http://, ftp:// or file:// URL.", + "type": "string", + "error": "GGBREPOS0002E" + }, + "config": { + "description": "Dictionary containing repository configuration", + "type": "object", + "error": "GGBREPOS0003E", + "properties": { + "dist": { + "description": "Distribution to DEB repository", + "type": "string", + "error": "GGBREPOS0004E" + }, + "comps": { + "description": "List of components to DEB repository", + "type": "array", + "error": "GGBREPOS0005E", + "uniqueItems": true, + "items": { + "description": "Component name", + "type": "string", + "error": "GGBREPOS0006E" + } + }, + "repo_name": { + "description": "YUM repository name", + "type": "string", + "error": "GGBREPOS0023E" + }, + "mirrorlist": { + "description": "URL to a file containing a list of baseurls", + "type": "string", + "error": "GGBREPOS0007E" + }, + "metalink": { + "description": "URL to a metalink file for the repomd.xml", + "type": "string", + "error": "GGBREPOS0029E" + } + } + } + }, + "additionalProperties": false, + "error": "KCHAPI0001E" + }, + "repository_update": { + "type": "object", + "properties": { + "baseurl": { + "description": "URL to the directory where the repodata directory of a repository is located. Can be an http://, ftp:// or file:// URL.", + "type": "string", + "error": "GGBREPOS0002E" + }, + "config": { + "description": "Dictionary containing repository configuration", + "type": "object", + "error": "GGBREPOS0003E", + "properties": { + "dist": { + "description": "Distribution to DEB repository", + "type": "string", + "error": "GGBREPOS0004E" + }, + "comps": { + "description": "List of components to DEB repository", + "type": "array", + "error": "GGBREPOS0005E", + "uniqueItems": true, + "items": { + "description": "Component name", + "type": "string", + "error": "GGBREPOS0006E" + } + }, + "repo_name": { + "description": "Human-readable string describing the YUM repository.", + "type": "string", + "error": "GGBREPOS0008E" + }, + "mirrorlist": { + "description": "URL to a file containing a list of baseurls for YUM repository", + "type": "string", + "error": "GGBREPOS0007E" + }, + "gpgcheck": { + "description": "Indicates if a GPG signature check on the packages gotten from repository should be performed.", + "type": "boolean", + "error": "GGBREPOS0009E" + }, + "gpgkey": { + "description": "URL pointing to the ASCII-armored GPG key file for the repository.", + "type": "string", + "error": "GGBREPOS0010E" + } + } + } + }, + "additionalProperties": false, + "error": "GGBAPI0001E" + + } + } +} diff --git a/src/wok/plugins/gingerbase/INSTALL b/src/wok/plugins/gingerbase/INSTALL new file mode 100644 index 0000000..63bf076 --- /dev/null +++ b/src/wok/plugins/gingerbase/INSTALL @@ -0,0 +1,369 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `<wchar.h>' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. diff --git a/src/wok/plugins/gingerbase/Makefile.am b/src/wok/plugins/gingerbase/Makefile.am new file mode 100644 index 0000000..c24bb16 --- /dev/null +++ b/src/wok/plugins/gingerbase/Makefile.am @@ -0,0 +1,155 @@ +# +# Ginger Base +# +# Copyright IBM Corp, 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +SUBDIRS = contrib control docs model po tests ui + +gingerbase_PYTHON = $(filter-out config.py, $(wildcard *.py)) + +nodist_gingerbase_PYTHON = config.py + +wokdir = $(pythondir)/wok +gingerbasedir = $(pythondir)/wok/plugins/gingerbase + +confdir = $(sysconfdir)/wok/plugins.d +dist_conf_DATA = gingerbase.conf + +AUTOMAKE_OPTIONS = foreign + +ACLOCAL_AMFLAGS = --install -I m4 + +EXTRA_DIST = \ + config.rpath \ + API.json \ + autogen.sh \ + COPYING.ASL2 \ + COPYING.LGPL \ + CONTRIBUTE.md \ + VERSION \ + build-aux/pkg-version \ + config.py.in \ + $(NULL) + + +PEP8_BLACKLIST = *config.py,*i18n.py,*tests/test_config.py + +I18N_FILES = ./i18n.py \ + $(NULL) + +check-local: + contrib/check_i18n.py $(I18N_FILES) + find . -path './.git' -prune -type f -o \ + -name '*.py' -o -name '*.py.in' | xargs $(PYFLAKES) | \ + while read LINE; do echo "$$LINE"; false; done + + $(PEP8) --version + $(PEP8) --filename '*.py,*.py.in' --exclude="$(PEP8_BLACKLIST)" . + + +# Link built mo files in the source tree to enable use of translations from +# within the source tree +all-local: + while read L && test -n "$$L"; do \ + dir=mo/$$L/LC_MESSAGES ; \ + $(MKDIR_P) $$dir ; \ + ln -sf ../../../po/$$L.gmo $$dir/gingerbase.mo ; \ + done < po/LINGUAS + +do_substitution = \ + sed -e 's,[@]prefix[@],$(prefix),g' \ + -e 's,[@]datadir[@],$(datadir),g' \ + -e 's,[@]sysconfdir[@],$(sysconfdir),g' \ + -e 's,[@]localstatedir[@],$(localstatedir),g' \ + -e 's,[@]pkgdatadir[@],$(pkgdatadir),g' \ + -e 's,[@]wokdir[@],$(wokdir),g' \ + -e 's,[@]gingerbasedir[@],$(gingerbasedir),g' \ + -e 's,[@]kimchiversion[@],$(PACKAGE_VERSION),g' \ + -e 's,[@]kimchirelease[@],$(PACKAGE_RELEASE),g' \ + -e 's,[@]withspice[@],$(WITH_SPICE),g' + +config.py: config.py.in Makefile + $(do_substitution) < $(srcdir)/config.py.in > config.py + + +# +# Packaging helpers +# + +install-deb: install + cp -R $(top_srcdir)/contrib/DEBIAN $(DESTDIR)/ + mkdir -p $(DESTDIR)/$(localstatedir)/lib/wok/ + touch $(DESTDIR)/$(localstatedir)/lib/wok/objectstore + mkdir -p $(DESTDIR)/$(localstatedir)/lib/wok/plugins/gingerbase/debugreports + + +deb: contrib/make-deb.sh + $(top_srcdir)/contrib/make-deb.sh + +gingerbase.spec: contrib/gingerbase.spec.fedora contrib/gingerbase.spec.suse + @if test -e /etc/redhat-release; then \ + ln -sf contrib/gingerbase.spec.fedora $@ ; \ + elif test -e /etc/SuSE-release; then \ + ln -sf contrib/gingerbase.spec.suse $@ ; \ + else \ + echo "Unable to select a spec file for RPM build" ; \ + /bin/false ; \ + fi + +rpm: dist gingerbase.spec + $(MKDIR_P) rpm/BUILD rpm/RPMS rpm/SOURCES rpm/SPECS rpm/SRPMS + cp $(top_srcdir)/gingerbase.spec rpm/SPECS/gingerbase.spec + cp $(DIST_ARCHIVES) rpm/SOURCES + rpmbuild -ba --define "_topdir `pwd`/rpm" rpm/SPECS/gingerbase.spec + +fedora-rpm: contrib/gingerbase.spec.fedora + ln -sf contrib/gingerbase.spec.fedora gingerbase.spec + $(MAKE) rpm + +suse-rpm: contrib/gingerbase.spec.suse + ln -sf contrib/gingerbase.spec.suse gingerbase.spec + $(MAKE) rpm + +ChangeLog: + @if test -d .git; then \ + $(top_srcdir)/build-aux/genChangelog --release > $@; \ + fi + +install-data-local: + $(MKDIR_P) $(DESTDIR)/$(localstatedir)/lib/wok/ + touch $(DESTDIR)/$(localstatedir)/lib/wok/objectstore + $(MKDIR_P) $(DESTDIR)$(gingerbasedir) + $(INSTALL_DATA) API.json $(DESTDIR)$(gingerbasedir)/API.json + mkdir -p $(DESTDIR)/$(localstatedir)/lib/wok/plugins/gingerbase/debugreports + +uninstall-local: + $(RM) $(DESTDIR)$(gingerbasedir)/API.json + $(RM) -rf $(DESTDIR)/$(localstatedir)/lib/wok/plugins/gingerbase + +VERSION: + @if test -d .git; then \ + git describe --abbrev=0 > $@; \ + fi + +.PHONY: deb install-deb rpm fedora-rpm suse-rpm ChangeLog VERSION + + +clean-local: + rm -rf mo rpm + +BUILT_SOURCES = config.py +CLEANFILES = config.py gingerbase.spec `find "$(top_srcdir)" -type f -name "*.pyc" -print` diff --git a/src/wok/plugins/gingerbase/VERSION b/src/wok/plugins/gingerbase/VERSION new file mode 100644 index 0000000..bc80560 --- /dev/null +++ b/src/wok/plugins/gingerbase/VERSION @@ -0,0 +1 @@ +1.5.0 diff --git a/src/wok/plugins/gingerbase/__init__.py b/src/wok/plugins/gingerbase/__init__.py new file mode 100644 index 0000000..21a12a9 --- /dev/null +++ b/src/wok/plugins/gingerbase/__init__.py @@ -0,0 +1,21 @@ +# +# Project Ginger Base +# +# Copyright IBM, Corp. 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +from gingerbase import GingerBase +__all__ = [GingerBase] diff --git a/src/wok/plugins/gingerbase/autogen.sh b/src/wok/plugins/gingerbase/autogen.sh new file mode 100755 index 0000000..0f22dba --- /dev/null +++ b/src/wok/plugins/gingerbase/autogen.sh @@ -0,0 +1,21 @@ +#!/bin/bash + +aclocal +automake --add-missing +autoreconf + +if [ ! -f "configure" ]; then + echo "Failed to generate configure script. Check to make sure autoconf, " + echo "automake, and other build dependencies are properly installed." + exit 1 +fi + +if [ "x$1" == "x--system" ]; then + ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var +else + if [ $# -gt 0 ]; then + ./configure $@ + else + ./configure --prefix=/usr/local + fi +fi diff --git a/src/wok/plugins/gingerbase/config.py.in b/src/wok/plugins/gingerbase/config.py.in new file mode 100644 index 0000000..b80b6fe --- /dev/null +++ b/src/wok/plugins/gingerbase/config.py.in @@ -0,0 +1,59 @@ +# +# Project Ginger Base +# +# Copyright IBM, Corp. 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA +# + +import os +import threading + +from wok.config import CACHEEXPIRES, PluginConfig, PluginPaths + +gingerBaseLock = threading.Lock() + + +def get_debugreports_path(): + return os.path.join(PluginPaths('gingerbase').state_dir, 'debugreports') + + +class GingerBasePaths(PluginPaths): + + def __init__(self): + super(GingerBasePaths, self).__init__('gingerbase') + + +gingerBasePaths = GingerBasePaths() + + +class GingerBaseConfig(PluginConfig): + def __init__(self): + super(GingerBaseConfig, self).__init__('gingerbase') + + custom_config = {} + for dirname in ('css', 'js', 'images'): + custom_config['/' + dirname] = { + 'tools.staticdir.on': True, + 'tools.staticdir.dir': os.path.join(gingerBasePaths.ui_dir, + dirname), + 'tools.wokauth.on': False, + 'tools.nocache.on': False} + if dirname != 'images': + custom_config['/' + dirname].update({ + 'tools.expires.on': True, + 'tools.expires.secs': CACHEEXPIRES}) + + self.update(custom_config) diff --git a/src/wok/plugins/gingerbase/config.rpath b/src/wok/plugins/gingerbase/config.rpath new file mode 100644 index 0000000..17298f2 --- /dev/null +++ b/src/wok/plugins/gingerbase/config.rpath @@ -0,0 +1,672 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2010 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit <gord(a)gnu.ai.mit.edu&gt;, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + darwin*) + case $cc_basename in + xlc*) + wl='-Wl,' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + newsos6) + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + pgcc | pgf77 | pgf90) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + wl='-Wl,' + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # Samuel A. Falvo II <kc5tja(a)dolphin.openprojects.net&gt; reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we cannot use + # them. + ld_shlibs=no + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if test "$GCC" = yes ; then + : + else + case $cc_basename in + xlc*) + ;; + *) + ld_shlibs=no + ;; + esac + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd1*) + ld_shlibs=no + ;; + freebsd2.2*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + freebsd2*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + library_names_spec='$libname.a' + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd1*) + ;; + freebsd* | dragonfly*) + case "$host_os" in + freebsd[123]*) + library_names_spec='$libname$shrext$versuffix' ;; + *) + library_names_spec='$libname$shrext' ;; + esac + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + nto-qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF + +# How to pass a linker flag through the compiler. +wl="$escaped_wl" + +# Static library suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally "so"). +shlibext="$shlibext" + +# Format of library name prefix. +libname_spec="$escaped_libname_spec" + +# Library names that the linker finds when passed -lNAME. +library_names_spec="$escaped_library_names_spec" + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec" + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator="$hardcode_libdir_separator" + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct="$hardcode_direct" + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L="$hardcode_minus_L" + +EOF diff --git a/src/wok/plugins/gingerbase/configure.ac b/src/wok/plugins/gingerbase/configure.ac new file mode 100644 index 0000000..00aba89 --- /dev/null +++ b/src/wok/plugins/gingerbase/configure.ac @@ -0,0 +1,103 @@ +# +# Ginger Base +# +# Copyright IBM Corp, 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +AC_INIT([gingerbase], [m4_esyscmd([./build-aux/pkg-version --version])]) + +AC_SUBST([PACKAGE_VERSION], + [m4_esyscmd([./build-aux/pkg-version --version])]) + +AC_SUBST([PACKAGE_RELEASE], + [m4_esyscmd([./build-aux/pkg-version --release])]) + +# Testing for version and release +AS_IF([test "x$PACKAGE_VERSION" = x], + AC_MSG_ERROR([package version not defined])) +AS_IF([test "x$PACKAGE_RELEASE" = x], + AC_MSG_ERROR([package release not defined])) + +AC_CONFIG_AUX_DIR([build-aux]) +AM_INIT_AUTOMAKE([-Wno-portability]) +AM_PATH_PYTHON([2.6]) +AC_PATH_PROG([PEP8], [pep8], [/usr/bin/pep8]) +AC_PYTHON_MODULE([unittest]) +AC_SUBST([HAVE_PYMOD_UNITTEST]) +AC_SUBST([PYTHON_VERSION]) +AM_GNU_GETTEXT([external]) +AM_GNU_GETTEXT_VERSION([0.10]) +AC_PATH_PROG([CHEETAH], [cheetah], [/usr/bin/cheetah]) + +# Checking for pyflakes +AC_PATH_PROG([PYFLAKES], [pyflakes]) +if test "x$PYFLAKES" = "x"; then + AC_MSG_WARN([pyflakes not found]) +fi + +AC_ARG_ENABLE( + [sample], + [AS_HELP_STRING( + [--enable-sample], + [enable sample plugin @<:@default=no@:>@] + )], + , + [enable_sample="no"] +) + +if test "${enable_sample}" = "yes"; then +AC_SUBST([ENABLE_SAMPLE], [True]) +else +AC_SUBST([ENABLE_SAMPLE], [False]) +fi + +AC_CONFIG_FILES([ + po/Makefile.in + po/gen-pot + Makefile + docs/Makefile + control/Makefile + model/Makefile + ui/Makefile + ui/config/Makefile + ui/css/Makefile + ui/images/Makefile + ui/images/theme-default/Makefile + ui/js/Makefile + ui/pages/Makefile + ui/pages/help/Makefile + ui/pages/help/en_US/Makefile + ui/pages/help/de_DE/Makefile + ui/pages/help/es_ES/Makefile + ui/pages/help/fr_FR/Makefile + ui/pages/help/it_IT/Makefile + ui/pages/help/ja_JP/Makefile + ui/pages/help/ko_KR/Makefile + ui/pages/help/pt_BR/Makefile + ui/pages/help/ru_RU/Makefile + ui/pages/help/zh_CN/Makefile + ui/pages/help/zh_TW/Makefile + contrib/Makefile + contrib/DEBIAN/Makefile + contrib/DEBIAN/control + contrib/gingerbase.spec.fedora + contrib/gingerbase.spec.suse + tests/Makefile +],[ + chmod +x po/gen-pot +]) + +AC_OUTPUT diff --git a/src/wok/plugins/gingerbase/gingerbase.conf b/src/wok/plugins/gingerbase/gingerbase.conf new file mode 100644 index 0000000..a7e6e08 --- /dev/null +++ b/src/wok/plugins/gingerbase/gingerbase.conf @@ -0,0 +1,31 @@ +[wok] +enable = True +plugin_class = "GingerBase" +uri = "/plugins/gingerbase" +extra_auth_api_class = "control.sub_nodes" + +[/] +tools.trailing_slash.on = False +request.methods_with_bodies = ('POST', 'PUT') +tools.nocache.on = True +tools.proxy.on = True +tools.sessions.on = True +tools.sessions.name = 'wok' +tools.sessions.secure = True +tools.sessions.httponly = True +tools.sessions.locking = 'explicit' +tools.sessions.storage_type = 'ram' +tools.sessions.timeout = 10 +tools.wokauth.on = True + +[/data/debugreports] +tools.staticdir.on = True +tools.staticdir.dir = wok.config.PluginPaths('gingerbase').state_dir + '/debugreports' +tools.nocache.on = False +tools.wokauth.on = True +tools.staticdir.content_types = {'xz': 'application/x-xz'} + +[/help] +tools.staticdir.on = True +tools.staticdir.dir = wok.config.PluginPaths('gingerbase').ui_dir + '/pages/help' +tools.nocache.on = True \ No newline at end of file diff --git a/src/wok/plugins/gingerbase/gingerbase.py b/src/wok/plugins/gingerbase/gingerbase.py new file mode 100644 index 0000000..493e9f3 --- /dev/null +++ b/src/wok/plugins/gingerbase/gingerbase.py @@ -0,0 +1,61 @@ +# +# Project Ginger Base +# +# Copyright IBM, Corp. 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +import json +import os + +from wok.i18n import messages +from wok.root import WokRoot + +import config +import mockmodel +from control import sub_nodes +from model import model as gingerBaseModel + + +class GingerBase(WokRoot): + def __init__(self, wok_options): + if hasattr(wok_options, "model"): + self.model = wok_options.model + elif wok_options.test: + self.model = mockmodel.MockModel() + else: + self.model = gingerBaseModel.Model() + + dev_env = wok_options.environment != 'production' + super(GingerBase, self).__init__(self.model, dev_env) + + for ident, node in sub_nodes.items(): + setattr(self, ident, node(self.model)) + + self.api_schema = json.load(open(os.path.join(os.path.dirname( + os.path.abspath(__file__)), 'API.json'))) + self.paths = config.gingerBasePaths + self.domain = 'gingerbase' + self.messages = messages + + make_dirs = [ + os.path.abspath(config.get_debugreports_path()), + ] + for directory in make_dirs: + if not os.path.isdir(directory): + os.makedirs(directory) + + def get_custom_conf(self): + return config.GingerBaseConfig() diff --git a/src/wok/plugins/gingerbase/lscpu.py b/src/wok/plugins/gingerbase/lscpu.py new file mode 100644 index 0000000..0fc1e72 --- /dev/null +++ b/src/wok/plugins/gingerbase/lscpu.py @@ -0,0 +1,126 @@ +# +# Project Ginger Base +# +# Copyright IBM, Corp. 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA +import logging + +from wok.utils import run_command +from wok.exception import NotFoundError + + +class LsCpu(object): + """ + Get CPU information about a CPU hyper threading/architecture on x86 + """ + def log_error(e): + """ + param e: error details to be logged + """ + log = logging.getLogger('Util') + log.warning('Exception in fetching the CPU architecture details: %s', + e) + + def __init__(self): + self.lsCpuInfo = {} + try: + # lscpu - display information about the CPU architecture + out, error, rc = run_command(['lscpu']) + # Output of lscpu on x86 is expected to be: + # Architecture: x86_64 + # CPU op-mode(s): 32-bit, 64-bit + # Byte Order: Little Endian + # CPU(s): 4 + # On-line CPU(s) list: 0-3 + # Thread(s) per core: 2 + # Core(s) per socket: 2 + # Socket(s): 1 + # NUMA node(s): 1 + # Vendor ID: GenuineIntel + # CPU family: 6 + # Model: 42 + # Model name: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz + # Stepping: 7 + # CPU MHz: 976.421 + # CPU max MHz: 3300.0000 + # CPU min MHz: 800.0000 + # BogoMIPS: 5182.99 + # Virtualization: VT-x + # L1d cache: 32K + # L1i cache: 32K + # L2 cache: 256K + # L3 cache: 3072K + # NUMA node0 CPU(s): 0-3 + + if not rc and (not out.isspace()): + lscpuout = out.split('\n') + if lscpuout and len(lscpuout) > 0: + for line in lscpuout: + if ":" in line and (len(line.split(':')) == 2): + self.lsCpuInfo[line.split(':')[0].strip()] = \ + line.split(':')[1].strip() + else: + continue + except Exception, e: + self.log_error(e) + raise NotFoundError("GGBCPUINF0004E") + + def get_sockets(self): + """ + param self: object of the class self + return: Socket(s) (information about the CPU architecture) + """ + try: + sockets = "Socket(s)" + if len(self.lsCpuInfo) > 0 and sockets in self.lsCpuInfo.keys(): + return int(self.lsCpuInfo[sockets]) + else: + raise NotFoundError("GGBCPUINF0005E") + except IndexError, e: + self.log_error(e) + raise NotFoundError("GGBCPUINF0005E") + + def get_cores_per_socket(self): + """ + param self: object of the class self + return: Core(s) per socket (information about the CPU architecture) + """ + try: + cores_per_socket = "Core(s) per socket" + if len(self.lsCpuInfo) > 0 and cores_per_socket \ + in self.lsCpuInfo.keys(): + return int(self.lsCpuInfo[cores_per_socket]) + else: + raise NotFoundError("GGBCPUINF0006E") + except IndexError, e: + self.log_error(e) + raise NotFoundError("GGBCPUINF0006E") + + def get_threads_per_core(self): + """ + param self: object of the class self + return: Thread(s) per core (information about the CPU architecture) + """ + try: + threads_per_core = "Thread(s) per core" + if len(self.lsCpuInfo) > 0 and threads_per_core \ + in self.lsCpuInfo.keys(): + return int(self.lsCpuInfo[threads_per_core]) + else: + raise NotFoundError("GGBCPUINF0007E") + except IndexError, e: + self.log_error(e) + raise NotFoundError("GGBCPUINF0007E") diff --git a/src/wok/plugins/gingerbase/mockmodel.py b/src/wok/plugins/gingerbase/mockmodel.py new file mode 100644 index 0000000..c77e54a --- /dev/null +++ b/src/wok/plugins/gingerbase/mockmodel.py @@ -0,0 +1,296 @@ +# +# Project Ginger Base +# +# Copyright IBM, Corp. 2015 +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +import lxml.etree as ET +import os +import random +import time + +from wok.objectstore import ObjectStore +from wok.utils import add_task, wok_log + +import config +from model import cpuinfo +from model.debugreports import DebugReportsModel +from model.model import Model + +fake_user = {'root': 'letmein!'} +mockmodel_defaults = {'domain': 'test', 'arch': 'i686'} + + +class MockModel(Model): + + def __init__(self, objstore_loc=None): + # Override osinfo.defaults to ajust the values according to + # test:///default driver + + self._mock_devices = MockDevices() + self._mock_partitions = MockPartitions() + self._mock_swupdate = MockSoftwareUpdate() + self._mock_repositories = MockRepositories() + + cpuinfo.get_topo_capabilities = \ + MockModel.get_topo_capabilities + + super(MockModel, self).__init__(objstore_loc) + self.objstore_loc = objstore_loc + self.objstore = ObjectStore(objstore_loc) + + # The MockModel methods are instantiated on runtime according to Model + # and BaseModel + # Because that a normal method override will not work here + # Instead of that we also need to do the override on runtime + for method in dir(self): + if method.startswith('_mock_'): + mock_method = getattr(self, method) + if not callable(mock_method): + continue + + m = method[6:] + model_method = getattr(self, m) + setattr(self, '_model_' + m, model_method) + setattr(self, m, mock_method) + + DebugReportsModel._gen_debugreport_file = self._gen_debugreport_file + + def reset(self): + self._mock_swupdate = MockSoftwareUpdate() + self._mock_repositories = MockRepositories() + + if hasattr(self, 'objstore'): + self.objstore = ObjectStore(self.objstore_loc) + + @staticmethod + def get_topo_capabilities(conn): + # The libvirt test driver doesn't return topology. + xml = "<topology sockets='1' cores='2' threads='2'/>" + return ET.fromstring(xml) + + def _gen_debugreport_file(self, name): + return add_task('/plugins/gingerbase/debugreports/%s' % name, + self._create_log, self.objstore, name) + + def _create_log(self, cb, name): + path = config.get_debugreports_path() + tmpf = os.path.join(path, name + '.tmp') + realf = os.path.join(path, name + '.txt') + length = random.randint(1000, 10000) + with open(tmpf, 'w') as fd: + while length: + fd.write('I am logged') + length = length - 1 + os.rename(tmpf, realf) + cb("OK", True) + + def _mock_host_shutdown(self, *name): + wok_log.info("The host system will be shutted down") + + def _mock_host_reboot(self, *name): + wok_log.info("The host system will be rebooted") + + def _mock_partitions_get_list(self): + return self._mock_partitions.partitions.keys() + + def _mock_partition_lookup(self, name): + return self._mock_partitions.partitions[name] + + def _mock_packagesupdate_get_list(self): + return self._mock_swupdate.pkgs.keys() + + def _mock_packageupdate_lookup(self, pkg_name): + return self._mock_swupdate.pkgs[pkg_name] + + def _mock_host_swupdate(self, args=None): + task_id = add_task('/plugins/gingerbase/host/swupdate', + self._mock_swupdate.doUpdate, + self.objstore) + return self.task_lookup(task_id) + + def _mock_repositories_get_list(self): + return self._mock_repositories.repos.keys() + + def _mock_repositories_create(self, params): + # Create a repo_id if not given by user. The repo_id will follow + # the format gingerbase_repo_<integer>, where integer is the number of + # seconds since the Epoch (January 1st, 1970), in UTC. + repo_id = params.get('repo_id', None) + if repo_id is None: + repo_id = "gingerbase_repo_%s" % str(int(time.time() * 1000)) + params.update({'repo_id': repo_id}) + + config = params.get('config', {}) + info = {'repo_id': repo_id, + 'baseurl': params['baseurl'], + 'enabled': True, + 'config': {'repo_name': config.get('repo_name', repo_id), + 'gpgkey': config.get('gpgkey', []), + 'gpgcheck': True, + 'mirrorlist': params.get('mirrorlist', '')}} + self._mock_repositories.repos[repo_id] = info + return repo_id + + def _mock_repository_lookup(self, repo_id): + return self._mock_repositories.repos[repo_id] + + def _mock_repository_delete(self, repo_id): + del self._mock_repositories.repos[repo_id] + + def _mock_repository_enable(self, repo_id): + self._mock_repositories.repos[repo_id]['enabled'] = True + + def _mock_repository_disable(self, repo_id): + self._mock_repositories.repos[repo_id]['enabled'] = False + + def _mock_repository_update(self, repo_id, params): + self._mock_repositories.repos[repo_id].update(params) + return repo_id + + +class MockPartitions(object): + def __init__(self): + self.partitions = {"vdx": {"available": True, "name": "vdx", + "fstype": "", "path": "/dev/vdx", + "mountpoint": "", "type": "disk", + "size": "2147483648"}, + "vdz": {"available": True, "name": "vdz", + "fstype": "", "path": "/dev/vdz", + "mountpoint": "", "type": "disk", + "size": "2147483648"}} + + +class MockDevices(object): + def __init__(self): + self.devices = { + 'computer': {'device_type': 'system', + 'firmware': {'release_date': '01/01/2012', + 'vendor': 'LENOVO', + 'version': 'XXXXX (X.XX )'}, + 'hardware': {'serial': 'PXXXXX', + 'uuid': + '9d660370-820f-4241-8731-5a60c97e8aa6', + 'vendor': 'LENOVO', + 'version': 'ThinkPad T420'}, + 'name': 'computer', + 'parent': None, + 'product': '4180XXX'}, + 'pci_0000_03_00_0': {'bus': 3, + 'device_type': 'pci', + 'domain': 0, + 'driver': {'name': 'iwlwifi'}, + 'function': 0, + 'iommuGroup': 7, + 'name': 'pci_0000_03_00_0', + 'parent': 'computer', + 'path': + '/sys/devices/pci0000:00/0000:03:00.0', + 'product': { + 'description': + 'Centrino Advanced-N 6205 [Taylor Peak]', + 'id': '0x0085'}, + 'slot': 0, + 'vendor': {'description': 'Intel Corporation', + 'id': '0x8086'}}, + 'pci_0000_0d_00_0': {'bus': 13, + 'device_type': 'pci', + 'domain': 0, + 'driver': {'name': 'sdhci-pci'}, + 'function': 0, + 'iommuGroup': 7, + 'name': 'pci_0000_0d_00_0', + 'parent': 'computer', + 'path': + '/sys/devices/pci0000:00/0000:0d:00.0', + 'product': {'description': + 'PCIe SDXC/MMC Host Controller', + 'id': '0xe823'}, + 'slot': 0, + 'vendor': {'description': 'Ricoh Co Ltd', + 'id': '0x1180'}}, + 'scsi_host0': {'adapter': {'fabric_wwn': '37df6c1efa1b4388', + 'type': 'fc_host', + 'wwnn': 'efb6563f06434a98', + 'wwpn': '742f32073aab45d7'}, + 'device_type': 'scsi_host', + 'host': 0, + 'name': 'scsi_host0', + 'parent': 'computer', + 'path': '/sys/devices/pci0000:00/0000:40:00.0/0'}, + 'scsi_host1': {'adapter': {'fabric_wwn': '542efa5dced34123', + 'type': 'fc_host', + 'wwnn': 'b7433a40c9b84092', + 'wwpn': '25c1f485ae42497f'}, + 'device_type': 'scsi_host', + 'host': 0, + 'name': 'scsi_host1', + 'parent': 'computer', + 'path': '/sys/devices/pci0000:00/0000:40:00.0/1'}, + 'scsi_host2': {'adapter': {'fabric_wwn': '5c373c334c20478d', + 'type': 'fc_host', + 'wwnn': 'f2030bec4a254e6b', + 'wwpn': '07dbca4164d44096'}, + 'device_type': 'scsi_host', + 'host': 0, + 'name': 'scsi_host2', + 'parent': 'computer', + 'path': '/sys/devices/pci0000:00/0000:40:00.0/2'}} + + +class MockSoftwareUpdate(object): + def __init__(self): + self.pkgs = { + 'udevmountd': {'repository': 'openSUSE-13.1-Update', + 'version': '0.81.5-14.1', + 'arch': 'x86_64', + 'package_name': 'udevmountd'}, + 'sysconfig-network': {'repository': 'openSUSE-13.1-Extras', + 'version': '0.81.5-14.1', + 'arch': 'x86_64', + 'package_name': 'sysconfig-network'}, + 'libzypp': {'repository': 'openSUSE-13.1-Update', + 'version': '13.9.0-10.1', + 'arch': 'noarch', + 'package_name': 'libzypp'}} + self._num2update = 3 + + def doUpdate(self, cb, params): + msgs = [] + for pkg in self.pkgs.keys(): + msgs.append("Updating package %s" % pkg) + cb('\n'.join(msgs)) + time.sleep(1) + + time.sleep(2) + msgs.append("All packages updated") + cb('\n'.join(msgs), True) + + # After updating all packages any package should be listed to be + # updated, so reset self._packages + self.pkgs = {} + + +class MockRepositories(object): + def __init__(self): + self.repos = {"gingerbase_repo_1392167832": + {"repo_id": "gingerbase_repo_1392167832", + "enabled": True, + "baseurl": "http://www.fedora.org", + "config": {"repo_name": "gingerbase_repo_1392167832", + "gpgkey": [], + "gpgcheck": True, + "mirrorlist": ""}}} -- 2.1.0