Re: [Kimchi-devel] Minor UI issue with Wok 2.4 and Kimchi 2.4

more info. if you net-destroy, net-dumpxml, net-undefine and then turn around and net-define, net-start the network, it is still stuck (i.e. all greyed out) You must create either 'create' the network in the kimchi UI (instead of net-define) OR the Network must have a different name. Clearly something in the UI is holding onto the Network Name. I tried just changing the UUID, but its the Network Name that is significant -bill On 4/3/2017 12:08 PM, WK wrote: > > Just migrated off a number of VMs from a U16.4 LTS host running > kim.2.3.1 > > then did an in place upgrade using dpkg -i and apt-get -f (to get a > few deps). > > rebooted and system came right up. > > The only issue I have encounter is that in the Network section. I had > 3 networks set up. The default and two additional (one vTap and a LAN > bridge). > > I wanted to remove one of them and move it to another port. In the > UI, all options are greyed out (i.e Stop, Edit, Delete). > > This occurs both on FireFox and on Edge on a Windows 10 desktop > > I have cleared cache etc and still have the issue. > > From the command line I had no problem using virsh net-destroy NET1 > and virsh net-undefine NET1 > > Back on the UI, of course kimchi showed that it was gone. I then used > the kimchi UI to recreate the Network with no problem and all the > normal UI options are available for the newly recreated Network. > > The remaining networks are still stuck. > > I guess I go ahead and undefine and then redefine them as well, but I > am curious if anyone else ran into this issue. > > > Sincerely, > > William Kern > > > _______________________________________________ > Kimchi-devel mailing list > Kimchi-devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/kimchi-devel _______________________________________________ Kimchi-devel mailing list Kimchi-devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/kimchi-devel