Reviewed-by: Adam King <rak@linux.vnet.ibm.com> On 03/14/2014 11:22 AM, Kersten Richter wrote:
Added information for software updates, adding storage device, and replacing contents of CDROM. Plus a couple of clean up things.
Signed-off-by: Kersten Richter <kersten@us.ibm.com> --- ui/pages/help/guests.dita | 83 ++++++++++++++++++++++++++++++------------ ui/pages/help/host.dita | 44 +++++++++++++---------- ui/pages/help/templates.dita | 18 +++++----- 3 files changed, 93 insertions(+), 52 deletions(-)
diff --git a/ui/pages/help/guests.dita b/ui/pages/help/guests.dita index bae98bb..0456bbb 100644 --- a/ui/pages/help/guests.dita +++ b/ui/pages/help/guests.dita @@ -23,26 +23,28 @@ KVM virtual machines.</shortdesc> <dd>Network input/output transmission rate in KB per seconds.</dd> </dlentry><dlentry> <dt>Disk I/O</dt> -<dd> Disk input/output transmission rate in KB per seconds.</dd> +<dd>Disk input/output transmission rate in KB per seconds.</dd> </dlentry><dlentry> <dt>Livetile</dt> -<dd rev="rev1">State of guest operating system console, or an icon -that represents the <tm tmtype="tm" trademark="Linux">Linux</tm> distribution -if the guest is not active.</dd> +<dd>State of guest operating system console, or an icon that represents +the <tm tmtype="tm" trademark="Linux">Linux</tm> distribution if the +guest is not active.</dd> </dlentry></dl></p> <p>The following actions icons are displayed for each guest:<dl> <dlentry> -<dt rev="rev1">Reset</dt> -<dd rev="rev1">Click to reset the guest. </dd> +<dt>Reset</dt> +<dd>Click to reset the guest. </dd> </dlentry><dlentry> -<dt><tm tmclass="IGNORE" tmtype="reg" trademark="Power">Power</tm> (Start -or Stop)</dt> +<dt>Power (Start or Stop)</dt> <dd>Click to power on or power off the guest. If the icon is red, the power is off; if the icon is green, the power is on.</dd> </dlentry></dl> </p> <p>The following actions can be selected for each guest:<ul> -<li>Select <uicontrol>VNC</uicontrol> to connect to the remote console -for the guest operating system.</li> +<li>Select <uicontrol>Connect</uicontrol> to connect to the remote +console for the guest operating system.</li> +<li>Select <uicontrol>Manage media</uicontrol> to change the path +to the installation media.</li> +<li>Select <uicontrol>Reset</uicontrol> to reset the guest.</li> <li>Select <uicontrol>Edit</uicontrol> to edit the properties of an existing guest. Guests can be edited only while stopped.</li> <li>Select <uicontrol>Delete</uicontrol> to delete the guest.</li> @@ -66,16 +68,12 @@ create a template.</li> </cshelp> <cshelp id="kimhvirtmedit" xml:lang="en-us"> <title>Edit guest</title> -<shortdesc rev="rev1">Edit the properties of an existing virtual machine. -Guests can be edited only while stopped.</shortdesc> -<csprolog><csmetadata> -<cswindowtitle>Title of window or panel associated with this help; -for review output only.</cswindowtitle> -<cswidgetlabel>Name of field or control associated with this help; -for review output only</cswidgetlabel> -</csmetadata></csprolog> +<shortdesc>Edit the properties of an existing virtual machine. Guests +can be edited only while stopped.</shortdesc> +<csprolog><csmetadata></csmetadata></csprolog> <csbody> -<p>For each guest, the following information is displayed:<dl><dlentry> +<p>For each guest, the following information is displayed on the <wintitle>General</wintitle> tab:<dl> +<dlentry> <dt>Name</dt> <dd>Name of the virtual machine.</dd> </dlentry><dlentry> @@ -86,14 +84,51 @@ for review output only</cswidgetlabel> <dd>Amount of memory in MB.</dd> </dlentry><dlentry> <dt>Icon</dt> -<dd rev="rev2"> Graphic image representing the Linux distribution -to be displayed in place of current status (Livetile) when the guest -is not active.</dd> +<dd>Graphic image representing the Linux distribution to be displayed +in place of current status (Livetile) when the guest is not active.</dd> </dlentry></dl></p> +<p>The following information is displayed on the <wintitle>Storage</wintitle> tab.</p> +<dl><dlentry> +<dt>Storage</dt> +<dd>Displays the location of the ISO file used for installation.</dd> +</dlentry></dl><?Pub Caret -2?> <p> Fields that are not disabled can be edited. After you edit a field, click <uicontrol>Save</uicontrol>. </p> </csbody> -</cshelp><?Pub Caret -1?> +</cshelp> +<cshelp id="kimstoragedevice" xml:lang="en-us"> +<title>Add, replace, or detach a storage device</title> +<shortdesc rev="rev1">You can add, replace, or detach a storage device +to your virtual machine. The only supported device is CDROM. To edit +your storage devices, follow these steps:</shortdesc> +<csbody> +<ol> +<li>On the <wintitle>Edit Guest</wintitle> window, select <wintitle>Storage</wintitle>.</li> +<li>To replace a storage device, click the first icon with the <uicontrol>orange +slash (/)</uicontrol>. Enter the ISO file path and click <uicontrol>Replace</uicontrol>.</li> +<li>To detach a storage device, click the second icon with the <uicontrol>red +dash (-)</uicontrol>. Confirm the deletion and click <uicontrol>OK</uicontrol>.</li> +<li>To add a storage device, click the third icon with the green <uicontrol>plus +sign (+)</uicontrol>. Enter a device name and ISO file path and click <uicontrol>Attach</uicontrol>.</li> +</ol> +</csbody> +</cshelp> +<cshelp id="kimreplacemedia" xml:lang="en-us"> +<title>Replace a CDROM of VM</title> +<shortdesc rev="rev1">You can replace the contents of the CDROM for +a virtual machine after the installation is complete.</shortdesc> +<csbody> +<ol> +<li>Ensure that the virtual machine is started.</li> +<li>From the Actions menu, select <uicontrol>Manage Media</uicontrol>.</li> +<li>To change what is currently loaded in the CDROM, click the <uicontrol>orange +slash (/)</uicontrol> icon next to the hdc field.</li> +<li>On the <wintitle>Replace a CDROM of VM</wintitle> page, enter +the ISO file path. The other two fields are read-only.</li> +<li>Click <uicontrol>Replace</uicontrol>.</li> +</ol> +</csbody> +</cshelp> <?tm 1391540919 3?> </cshelp> -<?Pub *0000003805?> +<?Pub *0000005541?> diff --git a/ui/pages/help/host.dita b/ui/pages/help/host.dita index d961edc..1b60b27 100644 --- a/ui/pages/help/host.dita +++ b/ui/pages/help/host.dita @@ -9,16 +9,16 @@ For support please see: https://w3.opensource.ibm.com/projects/dita-cshelp/--> <cshelp id="kimhhost" xml:lang="en-us"> <title>Host</title> -<shortdesc rev="rev1">The <wintitle>Host</wintitle> page shows information -about the host system, and allows you to shut down, restart, and connect +<shortdesc>The <wintitle>Host</wintitle> page shows information about +the host system, and allows you to shut down, restart, and connect to the host.</shortdesc> <csbody> <p>You can perform the following actions on the host:<ul> <li>Select <uicontrol>Shut down</uicontrol> to shut down the host system.</li> <li>Select <uicontrol>Restart</uicontrol> to restart the host system.</li> -<li rev="rev1">Select <uicontrol>Connect</uicontrol> to open a VNC -connection to the host system, if it is not already connected.</li> +<li>Select <uicontrol>Connect</uicontrol> to open a VNC connection +to the host system, if it is not already connected.</li> </ul></p> <p>Click the following sections to display information about the host:<dl> <dlentry> @@ -28,24 +28,30 @@ version, and code name, as well as the processor type and amount of memory in GB.</dd> </dlentry><dlentry> <dt>System statistics</dt> -<dd rev="rev1">This section displays graphs to show statistics for -CPU, memory, disk I/O, and network I/O for the host. Select <uicontrol>Collecting +<dd>This section displays graphs to show statistics for CPU, memory, +disk I/O, and network I/O for the host. Select <uicontrol>Collecting data after leaving this page</uicontrol> to continue collecting data when the host tab is out of view.</dd> </dlentry><dlentry> +<dt>Software Updates</dt> +<dd>This section displays information for all of the packages that +have updates available, including package name, version, architecture, +and repository. You can update all of the packages listed by selecting <uicontrol>Update +All</uicontrol>. You cannot select individual packages for updates.</dd> +</dlentry><dlentry> <dt>Debug reports</dt> -<dd rev="rev1">This section displays debug reports, including name -and file path. You can select from options to generate a new report, -or rename, remove, or download an existing report.<p>The debug report -is generated using the <cmdname>sosreport</cmdname> command. It is -available for Red Hat Enterprise <tm tmtype="tm" trademark="Linux">Linux</tm>, -Fedora, and Ubuntu distributions. The command generates a .tar file -that contains configuration and diagnostic information, such as the -running kernel version, loaded modules, and system and service configuration -files. The command also runs external programs to collect further -information and stores this output in the resulting archive.</p> </dd> -</dlentry></dl></p> -</csbody><?Pub Caret -2?> +<dd>This section displays debug reports, including name and file path. +You can select from options to generate a new report, or rename, remove, +or download an existing report.<p>The debug report is generated using +the <cmdname>sosreport</cmdname> command. It is available for Red +Hat Enterprise <tm tmtype="tm" trademark="Linux">Linux</tm>, Fedora, +and Ubuntu distributions. The command generates a .tar file that contains +configuration and diagnostic information, such as the running kernel +version, loaded modules, and system and service configuration files. +The command also runs external programs to collect further information +and stores this output in the resulting archive.</p> </dd> +</dlentry></dl><?Pub Caret 693?></p> +</csbody> <?tm 1392659967 1?> </cshelp> -<?Pub *0000002392?> +<?Pub *0000002695?> diff --git a/ui/pages/help/templates.dita b/ui/pages/help/templates.dita index d0122ec..8306681 100644 --- a/ui/pages/help/templates.dita +++ b/ui/pages/help/templates.dita @@ -56,7 +56,7 @@ is configured to use.</dd> <dd>Amount of memory in MB to be allocated to the virtual machine.</dd> </dlentry><dlentry> <dt>Disk</dt> -<dd rev="rev1">Disk size in GB.</dd> +<dd>Disk size in GB.</dd> </dlentry><dlentry> <dt>CDROM</dt> <dd>File path to the location of the ISO file used to install the @@ -66,10 +66,10 @@ KVM guest.</dd> <dd>Specific storage pool or the default storage pool.</dd> </dlentry><dlentry> <dt>Network</dt> -<dd rev="rev1">Default network interfaces available to the KVM guest. -You can select multiple networks.</dd> -</dlentry></dl><?Pub Caret 681?> Fields that are not disabled can -be edited. After you edit a field, click <uicontrol>Save</uicontrol>. </p> +<dd>Default network interfaces available to the KVM guest. You can +select multiple networks.</dd> +</dlentry></dl> Fields that are not disabled can be edited. After +you edit a field, click <uicontrol>Save</uicontrol>. </p> </csbody> </cshelp> <cshelp id="kimhaddtempl"> @@ -108,15 +108,15 @@ Templates from Selected ISO</uicontrol>.</li> <li>Select <uicontrol>All</uicontrol> to create a template from each listed ISO image, then click <uicontrol>Create Templates from Selected ISO</uicontrol>.</li> -<li rev="rev1">If the ISO image that you want to use does not appear -in the scan results, you can select from the following options:<ul> +<li>If the ISO image that you want to use does not appear in the scan +results, you can select from the following options:<ul> <li>Select <uicontrol>I want to use a specific ISO file</uicontrol> to specify a path to the ISO image.</li> <li>Click <uicontrol>Search more ISOs</uicontrol> to search for more ISO images.</li> -</ul></li> +</ul></li><?Pub Caret 0?> </ul></p> </csbody> </cshelp> </cshelp> -<?Pub *0000004468?> +<?Pub *0000004433?>
-- Adam King <rak@linux.vnet.ibm.com> IBM CSI