4:17 p.m.
From: Daniel Henrique Barboza <dhbarboza82(a)gmail.com>
This patch set filters the VEPA interfaces to be used
in network creation by eliminating the ConnectX-4
cards.
Unit tests, docs and UI changes included.
Daniel Henrique Barboza (2):
Filter VEPA interfaces: adding 'module' to interfaces API
Filter VEPA interfaces: JS changes
control/interfaces.py | 3 ++-
docs/API.md | 2 ++
tests/test_rest.py | 2 +-
ui/js/src/kimchi.api.js | 14 ++++++++++++++
ui/js/src/kimchi.network_add_main.js | 12 ++++++++++--
5 files changed, 29 insertions(+), 4 deletions(-)
--
2.5.5
4:17 p.m.
New subject: [PATCH] [Kimchi 1/2] Filter VEPA interfaces: adding 'module' to interfaces API
From: Daniel Henrique Barboza <dhbarboza82(a)gmail.com>
This patch adds the 'module' key to the interfaces API. This
information was already being retrieved by the model but
the control class was ignoring it.
Docs and test changes included.
Signed-off-by: Daniel Henrique Barboza <dhbarboza82(a)gmail.com>
---
control/interfaces.py | 3 ++-
docs/API.md | 2 ++
tests/test_rest.py | 2 +-
3 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/control/interfaces.py b/control/interfaces.py
index b04fc26..c65839a 100644
--- a/control/interfaces.py
+++ b/control/interfaces.py
@@ -43,4 +43,5 @@ class Interface(Resource):
'type': self.info['type'],
'ipaddr': self.info['ipaddr'],
'netmask': self.info['netmask'],
- 'status': self.info['status']}
+ 'status': self.info['status'],
+ 'module': self.info['module']}
diff --git a/docs/API.md b/docs/API.md
index 9d42c53..3a0cf02 100644
--- a/docs/API.md
+++ b/docs/API.md
@@ -663,6 +663,8 @@ A interface represents available interface on host.
* bonding: The combination of network interfaces on one host for redundancy
and/or increased throughput.
* bridge: A network device that connects multiple network segments.
+ * module: the name of the kernel module used to load this interface. Returns
+ 'unknown' if not applicable (ex: interface is a vlan).
* **POST**: *See Interface Actions*
diff --git a/tests/test_rest.py b/tests/test_rest.py
index b73d16c..c1294ee 100644
--- a/tests/test_rest.py
+++ b/tests/test_rest.py
@@ -1271,7 +1271,7 @@ class RestTests(unittest.TestCase):
resp = self.request('/plugins/kimchi/interfaces').read()
self.assertIn('name', resp)
interfaces = json.loads(resp)
- keys = ['name', 'type', 'ipaddr', 'netmask',
'status']
+ keys = ['name', 'type', 'ipaddr', 'netmask',
'status', 'module']
for interface in interfaces:
self.assertEquals(sorted(keys), sorted(interface.keys()))
--
2.5.5
4:17 p.m.
New subject: [PATCH] [Kimchi 2/2] Filter VEPA interfaces: JS changes
From: Daniel Henrique Barboza <dhbarboza82(a)gmail.com>
This patch adds a new call in kimchi.api.js to fetch only
the interfaces that has VEPA support and changes
kimchi.network_add_main.js to call this new function
when network type is VEPA.
Signed-off-by: Daniel Henrique Barboza <dhbarboza82(a)gmail.com>
---
ui/js/src/kimchi.api.js | 14 ++++++++++++++
ui/js/src/kimchi.network_add_main.js | 12 ++++++++++--
2 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/ui/js/src/kimchi.api.js b/ui/js/src/kimchi.api.js
index 3a94631..83d1cc7 100644
--- a/ui/js/src/kimchi.api.js
+++ b/ui/js/src/kimchi.api.js
@@ -634,6 +634,20 @@ var kimchi = {
});
},
+ getVEPAInterfaces : function(suc, err) {
+ wok.requestJSON({
+ url :
'plugins/kimchi/interfaces?module=^(?!mlx5_core|mlx5-core).*$',
+ type : 'GET',
+ contentType : 'application/json',
+ dataType : 'json',
+ resend : true,
+ success : suc,
+ error : err ? err : function(data) {
+ wok.message.error(data.responseJSON.reason);
+ }
+ });
+ },
+
deleteNetwork : function(name, suc, err) {
wok.requestJSON({
url : 'plugins/kimchi/networks/' + encodeURIComponent(name),
diff --git a/ui/js/src/kimchi.network_add_main.js b/ui/js/src/kimchi.network_add_main.js
index 4eb5c5b..5374902 100644
--- a/ui/js/src/kimchi.network_add_main.js
+++ b/ui/js/src/kimchi.network_add_main.js
@@ -169,7 +169,8 @@ kimchi.enableBridgeOptions = function(enable, networkType,
networkDestinationTyp
};
kimchi.loadInterfaces = function(interfaceFilterArray) {
- kimchi.getInterfaces(function(result) {
+
+ var loadInterfacesHTML = function(result) {
var options = [];
$selectDestination = $('#networkDestinationID');
var nics = {};
@@ -194,5 +195,12 @@ kimchi.loadInterfaces = function(interfaceFilterArray) {
$('#networkDestinationID').selectpicker('refresh');
kimchi.setDefaultNetworkType(result.length!==0);
kimchi.changeNetworkDestination();
- });
+ };
+
+ var networkType = $("#networkType").val();
+ if (networkType === kimchi.NETWORK_TYPE_VEPA) {
+ kimchi.getVEPAInterfaces(loadInterfacesHTML(result));
+ } else {
+ kimchi.getInterfaces(loadInterfacesHTML(result));
+ }
};
--
2.5.5
11:35 p.m.
Hi Daniel,
I tried those patches on my Fedora 23 machine and got the following
result while trying to add a new network:
The network type drop down was not displayed and an JS error is shown on
Firebug.
Could you check it and resend the patches?
Thanks,
Aline Manera
On 05/10/2016 05:17 PM, dhbarboza82(a)gmail.com wrote:
From: Daniel Henrique Barboza <dhbarboza82(a)gmail.com>
This patch set filters the VEPA interfaces to be used
in network creation by eliminating the ConnectX-4
cards.
Unit tests, docs and UI changes included.
Daniel Henrique Barboza (2):
Filter VEPA interfaces: adding 'module' to interfaces API
Filter VEPA interfaces: JS changes
control/interfaces.py | 3 ++-
docs/API.md | 2 ++
tests/test_rest.py | 2 +-
ui/js/src/kimchi.api.js | 14 ++++++++++++++
ui/js/src/kimchi.network_add_main.js | 12 ++++++++++--
5 files changed, 29 insertions(+), 4 deletions(-)
11:50 p.m.
Hi Daniel,
I tried those patches on my Fedora 23 machine and got the following
result while trying to add a new network:
The network type drop down was not displayed and an JS error is shown on
Firebug.
Could you check it and resend the patches?
Thanks,
Aline Manera
On 05/10/2016 05:17 PM, dhbarboza82(a)gmail.com wrote:
From: Daniel Henrique Barboza<dhbarboza82(a)gmail.com>
This patch set filters the VEPA interfaces to be used
in network creation by eliminating the ConnectX-4
cards.
Unit tests, docs and UI changes included.
Daniel Henrique Barboza (2):
Filter VEPA interfaces: adding 'module' to interfaces API
Filter VEPA interfaces: JS changes
control/interfaces.py | 3 ++-
docs/API.md | 2 ++
tests/test_rest.py | 2 +-
ui/js/src/kimchi.api.js | 14 ++++++++++++++
ui/js/src/kimchi.network_add_main.js | 12 ++++++++++--
5 files changed, 29 insertions(+), 4 deletions(-)
7:49 a.m.
Thanks for testing it, Aline!
I've fixed the issue in the v2. Let me know how it goes for you.
Daniel
On 05/12/2016 12:50 AM, Aline Manera wrote:
Hi Daniel,
I tried those patches on my Fedora 23 machine and got the following
result while trying to add a new network:
The network type drop down was not displayed and an JS error is shown
on Firebug.
Could you check it and resend the patches?
Thanks,
Aline Manera
On 05/10/2016 05:17 PM, dhbarboza82(a)gmail.com wrote:
> From: Daniel Henrique Barboza<dhbarboza82(a)gmail.com>
>
> This patch set filters the VEPA interfaces to be used
> in network creation by eliminating the ConnectX-4
> cards.
>
> Unit tests, docs and UI changes included.
>
>
> Daniel Henrique Barboza (2):
> Filter VEPA interfaces: adding 'module' to interfaces API
> Filter VEPA interfaces: JS changes
>
> control/interfaces.py | 3 ++-
> docs/API.md | 2 ++
> tests/test_rest.py | 2 +-
> ui/js/src/kimchi.api.js | 14 ++++++++++++++
> ui/js/src/kimchi.network_add_main.js | 12 ++++++++++--
> 5 files changed, 29 insertions(+), 4 deletions(-)
>
2925
days inactive
2927
days old
5 comments
3 participants
participants (3)
-
Aline Manera -
Daniel Henrique Barboza -
dhbarboza82＠gmail.com