[PATCH V2] Issue #992 : Create template on s390x without libvirt storage
From: Harshal Patil <harshalp@linux.vnet.ibm.com> V1: This patch adds support for creating templates on s390x arch without using libvirt related storage calls V2: Review comments Signed-off-by: Harshal Patil <harshalp@linux.vnet.ibm.com> --- docs/API.md | 2 + i18n.py | 3 ++ model/storagepools.py | 17 ++++++-- model/storagevolumes.py | 1 - model/templates.py | 27 +++++++++---- model/vms.py | 9 ++++- osinfo.py | 47 ++++++++++++++++++++-- utils.py | 34 ++++++++++++++++ vmtemplate.py | 105 ++++++++++++++++++++++++++++++------------------ 9 files changed, 189 insertions(+), 56 deletions(-) diff --git a/docs/API.md b/docs/API.md index 7bd677f..d8d191a 100644 --- a/docs/API.md +++ b/docs/API.md @@ -427,6 +427,7 @@ A interface represents available network interface on VM. over current will be used exclusively for memory hotplug * cdrom: A volume name or URI to an ISO image * storagepool: URI of the storagepool where template allocates vm storage. + * path : Storage path to store virtual disks without libvirt * networks *(optional)*: list of networks will be assigned to the new VM. * disks: An array of requested disks with the following optional fields (either *size* or *volume* must be specified): @@ -481,6 +482,7 @@ A interface represents available network interface on VM. * format: Format of the image. Valid formats: qcow, qcow2, qed, raw, vmdk, vpc. * pool: Storage pool information * name: URI of the storagepool where template allocates vm disk. + * path (optional): Either pool or path to store the virtual disks should be specified * graphics *(optional)*: A dict of graphics paramenters of this template * type: The type of graphics. It can be VNC or spice or None. * vnc: Graphical display using the Virtual Network diff --git a/i18n.py b/i18n.py index ea2c4ab..7e60079 100644 --- a/i18n.py +++ b/i18n.py @@ -190,6 +190,9 @@ messages = { "KCHTMPL0031E": _("Memory value (%(mem)sMiB) must be equal or lesser than maximum memory value (%(maxmem)sMiB)"), "KCHTMPL0032E": _("Unable to update template due error: %(err)s"), "KCHTMPL0033E": _("Parameter 'disks' requires at least one disk object"), + "KCHTMPL0034E": _("Storage without libvirt pool is not supported on this architecture"), + "KCHTMPL0035E": _("Error while creating the virtual disk for the guest. Details: %(err)s"), + "KCHTMPL0036E": _("When setting template disks without libvirt, following parameters are required: 'index', 'format', 'path', 'size'"), "KCHPOOL0001E": _("Storage pool %(name)s already exists"), "KCHPOOL0002E": _("Storage pool %(name)s does not exist"), diff --git a/model/storagepools.py b/model/storagepools.py index af92ec9..08e6426 100644 --- a/model/storagepools.py +++ b/model/storagepools.py @@ -33,7 +33,7 @@ from wok.plugins.kimchi.model.host import DeviceModel from wok.plugins.kimchi.model.libvirtstoragepool import StoragePoolDef from wok.plugins.kimchi.osinfo import defaults as tmpl_defaults from wok.plugins.kimchi.scan import Scanner -from wok.plugins.kimchi.utils import pool_name_from_uri +from wok.plugins.kimchi.utils import pool_name_from_uri, is_s390x ISO_POOL_NAME = u'kimchi_isos' @@ -57,6 +57,7 @@ STORAGE_SOURCES = {'netfs': {'addr': '/pool/source/host/@name', class StoragePoolsModel(object): + def __init__(self, **kargs): self.conn = kargs['conn'] self.objstore = kargs['objstore'] @@ -72,6 +73,13 @@ class StoragePoolsModel(object): def _check_default_pools(self): pools = {} + if 'disks' not in tmpl_defaults or len(tmpl_defaults['disks']) == 0 \ + or (not tmpl_defaults.get('disks')[0].get( + 'pool') and is_s390x()): + # Since libvirt pools are not supported on s390x + # No need to check for default pools on s390x + return + tmpl_defaults.get('disks') default_pool = tmpl_defaults['disks'][0]['pool']['name'] default_pool = default_pool.split('/')[-1] @@ -437,9 +445,10 @@ class StoragePoolModel(object): for tmpl in templates: t_info = session.get('template', tmpl) for disk in t_info['disks']: - t_pool = disk['pool']['name'] - if pool_name_from_uri(t_pool) == pool_name: - return True + if 'pool' in disk: + t_pool = disk['pool']['name'] + if pool_name_from_uri(t_pool) == pool_name: + return True return False def deactivate(self, name): diff --git a/model/storagevolumes.py b/model/storagevolumes.py index 4708674..d721d3b 100644 --- a/model/storagevolumes.py +++ b/model/storagevolumes.py @@ -44,7 +44,6 @@ from wok.plugins.kimchi.model.diskutils import set_disk_used_by from wok.plugins.kimchi.model.storagepools import StoragePoolModel from wok.plugins.kimchi.utils import get_next_clone_name - VOLUME_TYPE_MAP = {0: 'file', 1: 'block', 2: 'directory', diff --git a/model/templates.py b/model/templates.py index 8df8c3b..c749f4b 100644 --- a/model/templates.py +++ b/model/templates.py @@ -28,13 +28,15 @@ import urlparse from wok.exception import InvalidOperation, InvalidParameter from wok.exception import NotFoundError, OperationFailed -from wok.utils import probe_file_permission_as_user, run_setfacl_set_attr +from wok.utils import probe_file_permission_as_user +from wok.utils import run_setfacl_set_attr from wok.xmlutils.utils import xpath_get_text from wok.plugins.kimchi.config import get_kimchi_version from wok.plugins.kimchi.kvmusertests import UserTests from wok.plugins.kimchi.model.cpuinfo import CPUInfoModel from wok.plugins.kimchi.utils import is_libvirtd_up, pool_name_from_uri +from wok.plugins.kimchi.utils import create_disk_image from wok.plugins.kimchi.vmtemplate import VMTemplate ISO_TYPE = "ISO 9660 CD-ROM" @@ -400,15 +402,26 @@ class LibvirtVMTemplate(VMTemplate): def fork_vm_storage(self, vm_uuid): # Provision storages: - vol_list = self.to_volume_list(vm_uuid) + disk_and_vol_list = self.to_volume_list(vm_uuid) try: - for v in vol_list: - pool = self._get_storage_pool(v['pool']) - # outgoing text to libvirt, encode('utf-8') - pool.createXML(v['xml'].encode('utf-8'), 0) + for v in disk_and_vol_list: + if v['pool'] is not None: + pool = self._get_storage_pool(v['pool']) + # outgoing text to libvirt, encode('utf-8') + pool.createXML(v['xml'].encode('utf-8'), 0) + else: + capacity = v['capacity'] + format_type = v['format'] + path = v['path'] + create_disk_image( + format_type=format_type, + path=path, + capacity=capacity) + except libvirt.libvirtError as e: raise OperationFailed("KCHVMSTOR0008E", {'error': e.message}) - return vol_list + + return disk_and_vol_list def set_cpu_info(self): # undefined topology: consider these values to calculate maxvcpus diff --git a/model/vms.py b/model/vms.py index 7f607f5..3ad722e 100644 --- a/model/vms.py +++ b/model/vms.py @@ -61,7 +61,7 @@ from wok.plugins.kimchi.model.utils import remove_metadata_node from wok.plugins.kimchi.model.utils import set_metadata_node from wok.plugins.kimchi.osinfo import defaults, MEM_DEV_SLOTS from wok.plugins.kimchi.screenshot import VMScreenshot -from wok.plugins.kimchi.utils import get_next_clone_name +from wok.plugins.kimchi.utils import get_next_clone_name, is_s390x from wok.plugins.kimchi.utils import template_name_from_uri from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_node from wok.plugins.kimchi.xmlutils.bootorder import get_bootmenu_node @@ -1395,6 +1395,13 @@ class VMModel(object): except libvirt.libvirtError as e: wok_log.error('Unable to get storage volume by path: %s' % e.message) + try: + if is_s390x() and os.path.exists(path): + os.remove(path) + except Exception as e: + wok_log.error('Unable to delete storage path: %s' % + e.message) + except Exception as e: raise OperationFailed('KCHVOL0017E', {'err': e.message}) diff --git a/osinfo.py b/osinfo.py index 528cf14..d60cc15 100644 --- a/osinfo.py +++ b/osinfo.py @@ -158,6 +158,12 @@ def _get_tmpl_defaults(): 'maxmemory': _get_default_template_mem()} tmpl_defaults['storage']['disk.0'] = {'size': 10, 'format': 'qcow2', 'pool': 'default'} + is_on_s390x = True if _get_arch() == 's390x' else False + + if is_on_s390x: + tmpl_defaults['storage']['disk.0']['path'] = '/var/lib/libvirt/images/' + del tmpl_defaults['storage']['disk.0']['pool'] + tmpl_defaults['processor']['vcpus'] = 1 tmpl_defaults['processor']['maxvcpus'] = 1 tmpl_defaults['graphics'] = {'type': 'vnc', 'listen': '127.0.0.1'} @@ -165,7 +171,12 @@ def _get_tmpl_defaults(): default_config = ConfigObj(tmpl_defaults) # Load template configuration file - config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf') + if is_on_s390x: + config_file = os.path.join( + kimchiPaths.sysconf_dir, + 'template_s390x.conf') + else: + config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf') config = ConfigObj(config_file) # Merge default configuration with file configuration @@ -186,11 +197,39 @@ def _get_tmpl_defaults(): # Parse storage section to get disks values storage_section = default_config.pop('storage') defaults['disks'] = [] - for disk in storage_section.keys(): + + pool_exists = False + path_exists = False + for index, disk in enumerate(storage_section.keys()): data = storage_section[disk] data['index'] = int(disk.split('.')[1]) - data['pool'] = {"name": '/plugins/kimchi/storagepools/' + - storage_section[disk].pop('pool')} + # Right now 'Path' is only supported on s390x + if storage_section[disk].get('path') and is_on_s390x: + path_exists = True + data['path'] = storage_section[disk].pop('path') + if 'size' not in storage_section[disk]: + data['size'] = tmpl_defaults['storage']['disk.0']['size'] + else: + data['size'] = storage_section[disk].pop('size') + + if 'format' not in storage_section[disk]: + data['format'] = tmpl_defaults['storage']['disk.0']['format'] + else: + data['format'] = storage_section[disk].pop('format') + else: + storage_section[disk].get('pool') + pool_exists = True + data['pool'] = {"name": '/plugins/kimchi/storagepools/' + + storage_section[disk].pop('pool')} + + # If both pool and path don't exist, pick the defaults + if index == len(storage_section.keys()) - 1 and \ + (not pool_exists and not path_exists): + if is_on_s390x: # Special handling for s390x + data['path'] = tmpl_defaults['storage']['disk.0']['path'] + else: + data['pool'] = {"name": '/plugins/kimchi/storagepools/default'} + defaults['disks'].append(data) # Parse processor section to get vcpus and cpu_topology values diff --git a/utils.py b/utils.py index 26d3cf6..0fca191 100644 --- a/utils.py +++ b/utils.py @@ -24,6 +24,7 @@ import platform import re import sqlite3 import time +import os import urllib2 from httplib import HTTPConnection, HTTPException from urlparse import urlparse @@ -31,6 +32,7 @@ from urlparse import urlparse from wok.exception import InvalidParameter, OperationFailed from wok.plugins.kimchi import config from wok.plugins.kimchi.osinfo import get_template_default +from wok.stringutils import encode_value from wok.utils import run_command, wok_log from wok.xmlutils.utils import xpath_get_text @@ -272,3 +274,35 @@ def is_libvirtd_up(): output, error, rc = run_command(cmd, silent=True) return True if output == 'active\n' else False + + +def is_s390x(): + """ + Check if current arch is 's390x' + Returns: + """ + if os.uname()[4] == 's390x': + return True + + return False + + +def create_disk_image(format_type, path, capacity): + """ + Create a disk image for the Guest + Args: + format: Format of the storage. e.g. qcow2 + path: Path where the virtual disk will be created + capacity: Capacity of the virtual disk in GBs + + Returns: + + """ + out, err, rc = run_command( + ["/usr/bin/qemu-img", "create", "-f", format_type, "-o", + "preallocation=metadata", path, encode_value(capacity) + "G"]) + + if rc != 0: + raise OperationFailed("KCHTMPL0035E", {'err': err}) + + return \ No newline at end of file diff --git a/vmtemplate.py b/vmtemplate.py index babf050..3b9eb32 100644 --- a/vmtemplate.py +++ b/vmtemplate.py @@ -31,7 +31,8 @@ from wok.exception import MissingParameter, OperationFailed from wok.plugins.kimchi import imageinfo from wok.plugins.kimchi import osinfo from wok.plugins.kimchi.isoinfo import IsoImage -from wok.plugins.kimchi.utils import check_url_path, pool_name_from_uri +from wok.plugins.kimchi.utils import check_url_path, is_s390x +from wok.plugins.kimchi.utils import pool_name_from_uri from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_xml from wok.plugins.kimchi.xmlutils.cpu import get_cpu_xml from wok.plugins.kimchi.xmlutils.disk import get_disk_xml @@ -42,6 +43,7 @@ from wok.plugins.kimchi.xmlutils.serial import get_serial_xml class VMTemplate(object): + def __init__(self, args, scan=False, netboot=False): """ Construct a VM Template from a widely variable amount of information. @@ -95,35 +97,49 @@ class VMTemplate(object): disks = self.info.get('disks') basic_disk = ['index', 'format', 'pool', 'size'] + basic_path_disk = ['index', 'format', 'path', 'size'] ro_disk = ['index', 'format', 'pool', 'volume'] base_disk = ['index', 'base', 'pool', 'size', 'format'] for index, disk in enumerate(disks): disk_info = dict(default_disk) - - pool = disk.get('pool', default_disk['pool']) - pool_type = self._get_storage_type(pool['name']) - - if pool_type in ['iscsi', 'scsi']: - disk_info = {'index': 0, 'format': 'raw', 'volume': None} - - disk_info.update(disk) - pool_name = disk_info.get('pool', {}).get('name') - if pool_name is None: - raise MissingParameter('KCHTMPL0028E') - - keys = sorted(disk_info.keys()) - if ((keys != sorted(basic_disk)) and (keys != sorted(ro_disk)) and - (keys != sorted(base_disk))): - raise MissingParameter('KCHTMPL0028E') - - if pool_type in ['logical', 'iscsi', 'scsi']: - if disk_info['format'] != 'raw': - raise InvalidParameter('KCHTMPL0029E') - - disk_info['pool']['type'] = pool_type - disk_info['index'] = disk_info.get('index', index) - self.info['disks'][index] = disk_info + if disk.get('pool'): + pool = disk.get('pool', default_disk.get('pool')) + pool_type = self._get_storage_type(pool['name']) + if pool_type in ['iscsi', 'scsi']: + disk_info = {'index': 0, 'format': 'raw', 'volume': None} + + disk_info.update(disk) + pool_name = disk_info.get('pool', {}).get('name') + if pool_name is None: + raise MissingParameter('KCHTMPL0028E') + + keys = sorted(disk_info.keys()) + if ((keys != sorted(basic_disk)) and + (keys != sorted(ro_disk)) and + (keys != sorted(base_disk)) and + (keys != basic_path_disk)): + raise MissingParameter('KCHTMPL0028E') + + if pool_type in ['logical', 'iscsi', 'scsi']: + if disk_info['format'] != 'raw': + raise InvalidParameter('KCHTMPL0029E') + + disk_info['pool']['type'] = pool_type + disk_info['index'] = disk_info.get('index', index) + self.info['disks'][index] = disk_info + elif is_s390x(): + # For now support 'path' only on s390x + path = disk.get('path', default_disk['path']) + disk_info.update(disk) + keys = sorted(disk_info.keys()) + if keys != sorted(basic_path_disk): + raise MissingParameter('KCHTMPL0036E') + disk_info['path'] = path + disk_info['index'] = disk_info.get('index', index) + self.info['disks'][index] = disk_info + else: + raise InvalidParameter('KCHTMPL0034E') def _get_os_info(self, args, scan): distro = version = 'unknown' @@ -217,8 +233,9 @@ class VMTemplate(object): params = dict(base_disk_params) params['format'] = disk['format'] params['index'] = index - params.update(locals().get('%s_disk_params' % - disk['pool']['type'], {})) + if disk.get('pool'): + params.update(locals().get('%s_disk_params' % + disk['pool']['type'], {})) volume = disk.get('volume') if volume is not None: @@ -226,9 +243,13 @@ class VMTemplate(object): volume) else: img = "%s-%s.img" % (vm_uuid, params['index']) - storage_path = self._get_storage_path(disk['pool']['name']) + if disk.get('pool'): + storage_path = self._get_storage_path(disk['pool']['name']) + params['pool_type'] = disk['pool']['type'] + elif disk.get('path'): + storage_path = disk.get('path') + params['pool_type'] = None params['path'] = os.path.join(storage_path, img) - params['pool_type'] = disk['pool']['type'] disks_xml += get_disk_xml(params)[1] return unicode(disks_xml, 'utf-8') @@ -237,20 +258,24 @@ class VMTemplate(object): ret = [] for i, d in enumerate(self.info['disks']): # Create only .img. If storagepool is (i)SCSI, volumes will be LUNs - if d['pool']['type'] in ["iscsi", "scsi"]: + if 'pool' in d and d['pool']['type'] in ["iscsi", "scsi"]: continue index = d.get('index', i) volume = "%s-%s.img" % (vm_uuid, index) - storage_path = self._get_storage_path(d['pool']['name']) + if 'path' in d: + storage_path = d['path'] + else: + storage_path = self._get_storage_path(d['pool']['name']) + info = {'name': volume, 'capacity': d['size'], 'format': d['format'], 'path': '%s/%s' % (storage_path, volume), - 'pool': d['pool']['name']} + 'pool': d['pool']['name'] if 'pool' in d else None} - if 'logical' == d['pool']['type'] or \ + if ('pool' in d and 'logical' == d['pool']['type']) or \ info['format'] not in ['qcow2', 'raw']: info['allocation'] = info['capacity'] else: @@ -447,8 +472,9 @@ class VMTemplate(object): def validate(self): for disk in self.info.get('disks'): - pool_uri = disk.get('pool', {}).get('name') - self._get_storage_pool(pool_uri) + if 'pool' in disk: + pool_uri = disk.get('pool', {}).get('name') + self._get_storage_pool(pool_uri) self._network_validate() self._iso_validate() self.cpuinfo_validate() @@ -499,10 +525,11 @@ class VMTemplate(object): # validate storagepools and image-based templates integrity for disk in self.info['disks']: - pool_uri = disk['pool']['name'] - pool_name = pool_name_from_uri(pool_uri) - if pool_name not in self._get_active_storagepools_name(): - invalid['storagepools'] = [pool_name] + if 'pool' in disk: + pool_uri = disk['pool']['name'] + pool_name = pool_name_from_uri(pool_uri) + if pool_name not in self._get_active_storagepools_name(): + invalid['storagepools'] = [pool_name] if disk.get("base") is None: continue -- 1.9.1
On 08/31/2016 08:43 AM, harshalp@linux.vnet.ibm.com wrote:
From: Harshal Patil <harshalp@linux.vnet.ibm.com>
V1: This patch adds support for creating templates on s390x arch without using libvirt related storage calls
V2: Review comments
Signed-off-by: Harshal Patil <harshalp@linux.vnet.ibm.com> --- docs/API.md | 2 + i18n.py | 3 ++ model/storagepools.py | 17 ++++++-- model/storagevolumes.py | 1 - model/templates.py | 27 +++++++++---- model/vms.py | 9 ++++- osinfo.py | 47 ++++++++++++++++++++-- utils.py | 34 ++++++++++++++++ vmtemplate.py | 105 ++++++++++++++++++++++++++++++------------------ 9 files changed, 189 insertions(+), 56 deletions(-)
diff --git a/docs/API.md b/docs/API.md index 7bd677f..d8d191a 100644 --- a/docs/API.md +++ b/docs/API.md @@ -427,6 +427,7 @@ A interface represents available network interface on VM. over current will be used exclusively for memory hotplug * cdrom: A volume name or URI to an ISO image * storagepool: URI of the storagepool where template allocates vm storage. + * path : Storage path to store virtual disks without libvirt * networks *(optional)*: list of networks will be assigned to the new VM. * disks: An array of requested disks with the following optional fields (either *size* or *volume* must be specified): @@ -481,6 +482,7 @@ A interface represents available network interface on VM. * format: Format of the image. Valid formats: qcow, qcow2, qed, raw, vmdk, vpc. * pool: Storage pool information * name: URI of the storagepool where template allocates vm disk. + * path (optional): Either pool or path to store the virtual disks should be specified * graphics *(optional)*: A dict of graphics paramenters of this template * type: The type of graphics. It can be VNC or spice or None. * vnc: Graphical display using the Virtual Network diff --git a/i18n.py b/i18n.py index ea2c4ab..7e60079 100644 --- a/i18n.py +++ b/i18n.py @@ -190,6 +190,9 @@ messages = { "KCHTMPL0031E": _("Memory value (%(mem)sMiB) must be equal or lesser than maximum memory value (%(maxmem)sMiB)"), "KCHTMPL0032E": _("Unable to update template due error: %(err)s"), "KCHTMPL0033E": _("Parameter 'disks' requires at least one disk object"), + "KCHTMPL0034E": _("Storage without libvirt pool is not supported on this architecture"), + "KCHTMPL0035E": _("Error while creating the virtual disk for the guest. Details: %(err)s"), + "KCHTMPL0036E": _("When setting template disks without libvirt, following parameters are required: 'index', 'format', 'path', 'size'"),
"KCHPOOL0001E": _("Storage pool %(name)s already exists"), "KCHPOOL0002E": _("Storage pool %(name)s does not exist"), diff --git a/model/storagepools.py b/model/storagepools.py index af92ec9..08e6426 100644 --- a/model/storagepools.py +++ b/model/storagepools.py @@ -33,7 +33,7 @@ from wok.plugins.kimchi.model.host import DeviceModel from wok.plugins.kimchi.model.libvirtstoragepool import StoragePoolDef from wok.plugins.kimchi.osinfo import defaults as tmpl_defaults from wok.plugins.kimchi.scan import Scanner -from wok.plugins.kimchi.utils import pool_name_from_uri +from wok.plugins.kimchi.utils import pool_name_from_uri, is_s390x
ISO_POOL_NAME = u'kimchi_isos' @@ -57,6 +57,7 @@ STORAGE_SOURCES = {'netfs': {'addr': '/pool/source/host/@name',
class StoragePoolsModel(object): + def __init__(self, **kargs): self.conn = kargs['conn'] self.objstore = kargs['objstore'] @@ -72,6 +73,13 @@ class StoragePoolsModel(object): def _check_default_pools(self): pools = {}
+ if 'disks' not in tmpl_defaults or len(tmpl_defaults['disks']) == 0 \ + or (not tmpl_defaults.get('disks')[0].get( + 'pool') and is_s390x()): + # Since libvirt pools are not supported on s390x + # No need to check for default pools on s390x + return
Can't we only do: if is_s390x(): return ? I didn't understand why the other conditions are needed.
+ tmpl_defaults.get('disks') default_pool = tmpl_defaults['disks'][0]['pool']['name'] default_pool = default_pool.split('/')[-1]
@@ -437,9 +445,10 @@ class StoragePoolModel(object): for tmpl in templates: t_info = session.get('template', tmpl) for disk in t_info['disks']: - t_pool = disk['pool']['name'] - if pool_name_from_uri(t_pool) == pool_name: - return True + if 'pool' in disk: + t_pool = disk['pool']['name'] + if pool_name_from_uri(t_pool) == pool_name: + return True return False
def deactivate(self, name): diff --git a/model/storagevolumes.py b/model/storagevolumes.py index 4708674..d721d3b 100644 --- a/model/storagevolumes.py +++ b/model/storagevolumes.py @@ -44,7 +44,6 @@ from wok.plugins.kimchi.model.diskutils import set_disk_used_by from wok.plugins.kimchi.model.storagepools import StoragePoolModel from wok.plugins.kimchi.utils import get_next_clone_name
- VOLUME_TYPE_MAP = {0: 'file', 1: 'block', 2: 'directory', diff --git a/model/templates.py b/model/templates.py index 8df8c3b..c749f4b 100644 --- a/model/templates.py +++ b/model/templates.py @@ -28,13 +28,15 @@ import urlparse
from wok.exception import InvalidOperation, InvalidParameter from wok.exception import NotFoundError, OperationFailed -from wok.utils import probe_file_permission_as_user, run_setfacl_set_attr +from wok.utils import probe_file_permission_as_user +from wok.utils import run_setfacl_set_attr from wok.xmlutils.utils import xpath_get_text
from wok.plugins.kimchi.config import get_kimchi_version from wok.plugins.kimchi.kvmusertests import UserTests from wok.plugins.kimchi.model.cpuinfo import CPUInfoModel from wok.plugins.kimchi.utils import is_libvirtd_up, pool_name_from_uri +from wok.plugins.kimchi.utils import create_disk_image from wok.plugins.kimchi.vmtemplate import VMTemplate
ISO_TYPE = "ISO 9660 CD-ROM" @@ -400,15 +402,26 @@ class LibvirtVMTemplate(VMTemplate):
def fork_vm_storage(self, vm_uuid): # Provision storages: - vol_list = self.to_volume_list(vm_uuid) + disk_and_vol_list = self.to_volume_list(vm_uuid) try: - for v in vol_list: - pool = self._get_storage_pool(v['pool']) - # outgoing text to libvirt, encode('utf-8') - pool.createXML(v['xml'].encode('utf-8'), 0) + for v in disk_and_vol_list: + if v['pool'] is not None: + pool = self._get_storage_pool(v['pool']) + # outgoing text to libvirt, encode('utf-8') + pool.createXML(v['xml'].encode('utf-8'), 0) + else: + capacity = v['capacity'] + format_type = v['format'] + path = v['path'] + create_disk_image( + format_type=format_type, + path=path, + capacity=capacity) + except libvirt.libvirtError as e: raise OperationFailed("KCHVMSTOR0008E", {'error': e.message}) - return vol_list + + return disk_and_vol_list
def set_cpu_info(self): # undefined topology: consider these values to calculate maxvcpus diff --git a/model/vms.py b/model/vms.py index 7f607f5..3ad722e 100644 --- a/model/vms.py +++ b/model/vms.py @@ -61,7 +61,7 @@ from wok.plugins.kimchi.model.utils import remove_metadata_node from wok.plugins.kimchi.model.utils import set_metadata_node from wok.plugins.kimchi.osinfo import defaults, MEM_DEV_SLOTS from wok.plugins.kimchi.screenshot import VMScreenshot -from wok.plugins.kimchi.utils import get_next_clone_name +from wok.plugins.kimchi.utils import get_next_clone_name, is_s390x from wok.plugins.kimchi.utils import template_name_from_uri from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_node from wok.plugins.kimchi.xmlutils.bootorder import get_bootmenu_node @@ -1395,6 +1395,13 @@ class VMModel(object): except libvirt.libvirtError as e: wok_log.error('Unable to get storage volume by path: %s' % e.message) + try: + if is_s390x() and os.path.exists(path): + os.remove(path) + except Exception as e: + wok_log.error('Unable to delete storage path: %s' % + e.message) + except Exception as e: raise OperationFailed('KCHVOL0017E', {'err': e.message})
diff --git a/osinfo.py b/osinfo.py index 528cf14..d60cc15 100644 --- a/osinfo.py +++ b/osinfo.py @@ -158,6 +158,12 @@ def _get_tmpl_defaults(): 'maxmemory': _get_default_template_mem()} tmpl_defaults['storage']['disk.0'] = {'size': 10, 'format': 'qcow2', 'pool': 'default'} + is_on_s390x = True if _get_arch() == 's390x' else False + + if is_on_s390x: + tmpl_defaults['storage']['disk.0']['path'] = '/var/lib/libvirt/images/' + del tmpl_defaults['storage']['disk.0']['pool'] + tmpl_defaults['processor']['vcpus'] = 1 tmpl_defaults['processor']['maxvcpus'] = 1 tmpl_defaults['graphics'] = {'type': 'vnc', 'listen': '127.0.0.1'} @@ -165,7 +171,12 @@ def _get_tmpl_defaults(): default_config = ConfigObj(tmpl_defaults)
# Load template configuration file - config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf') + if is_on_s390x: + config_file = os.path.join( + kimchiPaths.sysconf_dir, + 'template_s390x.conf') + else: + config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf') config = ConfigObj(config_file)
# Merge default configuration with file configuration @@ -186,11 +197,39 @@ def _get_tmpl_defaults(): # Parse storage section to get disks values storage_section = default_config.pop('storage') defaults['disks'] = [] - for disk in storage_section.keys(): +
+ pool_exists = False + path_exists = False
Why do you need those flags?
+ for index, disk in enumerate(storage_section.keys()): data = storage_section[disk] data['index'] = int(disk.split('.')[1]) - data['pool'] = {"name": '/plugins/kimchi/storagepools/' + - storage_section[disk].pop('pool')} + # Right now 'Path' is only supported on s390x + if storage_section[disk].get('path') and is_on_s390x: + path_exists = True + data['path'] = storage_section[disk].pop('path') + if 'size' not in storage_section[disk]: + data['size'] = tmpl_defaults['storage']['disk.0']['size'] + else: + data['size'] = storage_section[disk].pop('size') + + if 'format' not in storage_section[disk]: + data['format'] = tmpl_defaults['storage']['disk.0']['format'] + else: + data['format'] = storage_section[disk].pop('format') + else: + storage_section[disk].get('pool') + pool_exists = True + data['pool'] = {"name": '/plugins/kimchi/storagepools/' + + storage_section[disk].pop('pool')} +
+ # If both pool and path don't exist, pick the defaults + if index == len(storage_section.keys()) - 1 and \ + (not pool_exists and not path_exists): + if is_on_s390x: # Special handling for s390x + data['path'] = tmpl_defaults['storage']['disk.0']['path'] + else: + data['pool'] = {"name": '/plugins/kimchi/storagepools/default'} +
Sorry, I couldn't understand why the above block is needed. Could you elaborate, please?
defaults['disks'].append(data)
# Parse processor section to get vcpus and cpu_topology values diff --git a/utils.py b/utils.py index 26d3cf6..0fca191 100644 --- a/utils.py +++ b/utils.py @@ -24,6 +24,7 @@ import platform import re import sqlite3 import time +import os import urllib2 from httplib import HTTPConnection, HTTPException from urlparse import urlparse @@ -31,6 +32,7 @@ from urlparse import urlparse from wok.exception import InvalidParameter, OperationFailed from wok.plugins.kimchi import config from wok.plugins.kimchi.osinfo import get_template_default +from wok.stringutils import encode_value from wok.utils import run_command, wok_log from wok.xmlutils.utils import xpath_get_text
@@ -272,3 +274,35 @@ def is_libvirtd_up():
output, error, rc = run_command(cmd, silent=True) return True if output == 'active\n' else False + + +def is_s390x(): + """ + Check if current arch is 's390x' + Returns: + """ + if os.uname()[4] == 's390x': + return True + + return False + + +def create_disk_image(format_type, path, capacity): + """ + Create a disk image for the Guest + Args: + format: Format of the storage. e.g. qcow2 + path: Path where the virtual disk will be created + capacity: Capacity of the virtual disk in GBs + + Returns: + + """ + out, err, rc = run_command( + ["/usr/bin/qemu-img", "create", "-f", format_type, "-o", + "preallocation=metadata", path, encode_value(capacity) + "G"]) + + if rc != 0: + raise OperationFailed("KCHTMPL0035E", {'err': err}) + + return \ No newline at end of file diff --git a/vmtemplate.py b/vmtemplate.py index babf050..3b9eb32 100644 --- a/vmtemplate.py +++ b/vmtemplate.py @@ -31,7 +31,8 @@ from wok.exception import MissingParameter, OperationFailed from wok.plugins.kimchi import imageinfo from wok.plugins.kimchi import osinfo from wok.plugins.kimchi.isoinfo import IsoImage -from wok.plugins.kimchi.utils import check_url_path, pool_name_from_uri +from wok.plugins.kimchi.utils import check_url_path, is_s390x +from wok.plugins.kimchi.utils import pool_name_from_uri from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_xml from wok.plugins.kimchi.xmlutils.cpu import get_cpu_xml from wok.plugins.kimchi.xmlutils.disk import get_disk_xml @@ -42,6 +43,7 @@ from wok.plugins.kimchi.xmlutils.serial import get_serial_xml
class VMTemplate(object): + def __init__(self, args, scan=False, netboot=False): """ Construct a VM Template from a widely variable amount of information. @@ -95,35 +97,49 @@ class VMTemplate(object): disks = self.info.get('disks')
basic_disk = ['index', 'format', 'pool', 'size'] + basic_path_disk = ['index', 'format', 'path', 'size'] ro_disk = ['index', 'format', 'pool', 'volume'] base_disk = ['index', 'base', 'pool', 'size', 'format']
for index, disk in enumerate(disks): disk_info = dict(default_disk) - - pool = disk.get('pool', default_disk['pool']) - pool_type = self._get_storage_type(pool['name']) - - if pool_type in ['iscsi', 'scsi']: - disk_info = {'index': 0, 'format': 'raw', 'volume': None} - - disk_info.update(disk) - pool_name = disk_info.get('pool', {}).get('name') - if pool_name is None: - raise MissingParameter('KCHTMPL0028E') - - keys = sorted(disk_info.keys()) - if ((keys != sorted(basic_disk)) and (keys != sorted(ro_disk)) and - (keys != sorted(base_disk))): - raise MissingParameter('KCHTMPL0028E') - - if pool_type in ['logical', 'iscsi', 'scsi']: - if disk_info['format'] != 'raw': - raise InvalidParameter('KCHTMPL0029E') - - disk_info['pool']['type'] = pool_type - disk_info['index'] = disk_info.get('index', index) - self.info['disks'][index] = disk_info
+ if disk.get('pool'):
Maybe it is safer to check if the arch is not s390x.
+ pool = disk.get('pool', default_disk.get('pool')) + pool_type = self._get_storage_type(pool['name']) + if pool_type in ['iscsi', 'scsi']: + disk_info = {'index': 0, 'format': 'raw', 'volume': None} + + disk_info.update(disk) + pool_name = disk_info.get('pool', {}).get('name') + if pool_name is None: + raise MissingParameter('KCHTMPL0028E') + + keys = sorted(disk_info.keys()) + if ((keys != sorted(basic_disk)) and + (keys != sorted(ro_disk)) and + (keys != sorted(base_disk)) and + (keys != basic_path_disk)): + raise MissingParameter('KCHTMPL0028E') + + if pool_type in ['logical', 'iscsi', 'scsi']: + if disk_info['format'] != 'raw': + raise InvalidParameter('KCHTMPL0029E') + + disk_info['pool']['type'] = pool_type + disk_info['index'] = disk_info.get('index', index) + self.info['disks'][index] = disk_info + elif is_s390x(): + # For now support 'path' only on s390x + path = disk.get('path', default_disk['path']) + disk_info.update(disk) + keys = sorted(disk_info.keys()) + if keys != sorted(basic_path_disk): + raise MissingParameter('KCHTMPL0036E') + disk_info['path'] = path + disk_info['index'] = disk_info.get('index', index) + self.info['disks'][index] = disk_info + else: + raise InvalidParameter('KCHTMPL0034E')
def _get_os_info(self, args, scan): distro = version = 'unknown' @@ -217,8 +233,9 @@ class VMTemplate(object): params = dict(base_disk_params) params['format'] = disk['format'] params['index'] = index - params.update(locals().get('%s_disk_params' % - disk['pool']['type'], {})) + if disk.get('pool'): + params.update(locals().get('%s_disk_params' % + disk['pool']['type'], {}))
volume = disk.get('volume') if volume is not None: @@ -226,9 +243,13 @@ class VMTemplate(object): volume) else: img = "%s-%s.img" % (vm_uuid, params['index']) - storage_path = self._get_storage_path(disk['pool']['name']) + if disk.get('pool'): + storage_path = self._get_storage_path(disk['pool']['name']) + params['pool_type'] = disk['pool']['type'] + elif disk.get('path'): + storage_path = disk.get('path') + params['pool_type'] = None params['path'] = os.path.join(storage_path, img) - params['pool_type'] = disk['pool']['type'] disks_xml += get_disk_xml(params)[1]
return unicode(disks_xml, 'utf-8') @@ -237,20 +258,24 @@ class VMTemplate(object): ret = [] for i, d in enumerate(self.info['disks']): # Create only .img. If storagepool is (i)SCSI, volumes will be LUNs - if d['pool']['type'] in ["iscsi", "scsi"]: + if 'pool' in d and d['pool']['type'] in ["iscsi", "scsi"]: continue
index = d.get('index', i) volume = "%s-%s.img" % (vm_uuid, index)
- storage_path = self._get_storage_path(d['pool']['name']) + if 'path' in d: + storage_path = d['path'] + else: + storage_path = self._get_storage_path(d['pool']['name']) + info = {'name': volume, 'capacity': d['size'], 'format': d['format'], 'path': '%s/%s' % (storage_path, volume), - 'pool': d['pool']['name']} + 'pool': d['pool']['name'] if 'pool' in d else None}
- if 'logical' == d['pool']['type'] or \ + if ('pool' in d and 'logical' == d['pool']['type']) or \ info['format'] not in ['qcow2', 'raw']: info['allocation'] = info['capacity'] else: @@ -447,8 +472,9 @@ class VMTemplate(object):
def validate(self): for disk in self.info.get('disks'): - pool_uri = disk.get('pool', {}).get('name') - self._get_storage_pool(pool_uri) + if 'pool' in disk: + pool_uri = disk.get('pool', {}).get('name') + self._get_storage_pool(pool_uri) self._network_validate() self._iso_validate() self.cpuinfo_validate() @@ -499,10 +525,11 @@ class VMTemplate(object):
# validate storagepools and image-based templates integrity for disk in self.info['disks']: - pool_uri = disk['pool']['name'] - pool_name = pool_name_from_uri(pool_uri) - if pool_name not in self._get_active_storagepools_name(): - invalid['storagepools'] = [pool_name] + if 'pool' in disk: + pool_uri = disk['pool']['name'] + pool_name = pool_name_from_uri(pool_uri) + if pool_name not in self._get_active_storagepools_name(): + invalid['storagepools'] = [pool_name]
if disk.get("base") is None: continue
On Thursday 01 September 2016 02:21 AM, Aline Manera wrote:
On 08/31/2016 08:43 AM, harshalp@linux.vnet.ibm.com wrote:
From: Harshal Patil <harshalp@linux.vnet.ibm.com>
V1: This patch adds support for creating templates on s390x arch without using libvirt related storage calls
V2: Review comments
Signed-off-by: Harshal Patil <harshalp@linux.vnet.ibm.com> --- docs/API.md | 2 + i18n.py | 3 ++ model/storagepools.py | 17 ++++++-- model/storagevolumes.py | 1 - model/templates.py | 27 +++++++++---- model/vms.py | 9 ++++- osinfo.py | 47 ++++++++++++++++++++-- utils.py | 34 ++++++++++++++++ vmtemplate.py | 105 ++++++++++++++++++++++++++++++------------------ 9 files changed, 189 insertions(+), 56 deletions(-)
diff --git a/docs/API.md b/docs/API.md index 7bd677f..d8d191a 100644 --- a/docs/API.md +++ b/docs/API.md @@ -427,6 +427,7 @@ A interface represents available network interface on VM. over current will be used exclusively for memory hotplug * cdrom: A volume name or URI to an ISO image * storagepool: URI of the storagepool where template allocates vm storage. + * path : Storage path to store virtual disks without libvirt * networks *(optional)*: list of networks will be assigned to the new VM. * disks: An array of requested disks with the following optional fields (either *size* or *volume* must be specified): @@ -481,6 +482,7 @@ A interface represents available network interface on VM. * format: Format of the image. Valid formats: qcow, qcow2, qed, raw, vmdk, vpc. * pool: Storage pool information * name: URI of the storagepool where template allocates vm disk. + * path (optional): Either pool or path to store the virtual disks should be specified * graphics *(optional)*: A dict of graphics paramenters of this template * type: The type of graphics. It can be VNC or spice or None. * vnc: Graphical display using the Virtual Network diff --git a/i18n.py b/i18n.py index ea2c4ab..7e60079 100644 --- a/i18n.py +++ b/i18n.py @@ -190,6 +190,9 @@ messages = { "KCHTMPL0031E": _("Memory value (%(mem)sMiB) must be equal or lesser than maximum memory value (%(maxmem)sMiB)"), "KCHTMPL0032E": _("Unable to update template due error: %(err)s"), "KCHTMPL0033E": _("Parameter 'disks' requires at least one disk object"), + "KCHTMPL0034E": _("Storage without libvirt pool is not supported on this architecture"), + "KCHTMPL0035E": _("Error while creating the virtual disk for the guest. Details: %(err)s"), + "KCHTMPL0036E": _("When setting template disks without libvirt, following parameters are required: 'index', 'format', 'path', 'size'"),
"KCHPOOL0001E": _("Storage pool %(name)s already exists"), "KCHPOOL0002E": _("Storage pool %(name)s does not exist"), diff --git a/model/storagepools.py b/model/storagepools.py index af92ec9..08e6426 100644 --- a/model/storagepools.py +++ b/model/storagepools.py @@ -33,7 +33,7 @@ from wok.plugins.kimchi.model.host import DeviceModel from wok.plugins.kimchi.model.libvirtstoragepool import StoragePoolDef from wok.plugins.kimchi.osinfo import defaults as tmpl_defaults from wok.plugins.kimchi.scan import Scanner -from wok.plugins.kimchi.utils import pool_name_from_uri +from wok.plugins.kimchi.utils import pool_name_from_uri, is_s390x
ISO_POOL_NAME = u'kimchi_isos' @@ -57,6 +57,7 @@ STORAGE_SOURCES = {'netfs': {'addr': '/pool/source/host/@name',
class StoragePoolsModel(object): + def __init__(self, **kargs): self.conn = kargs['conn'] self.objstore = kargs['objstore'] @@ -72,6 +73,13 @@ class StoragePoolsModel(object): def _check_default_pools(self): pools = {}
+ if 'disks' not in tmpl_defaults or len(tmpl_defaults['disks']) == 0 \ + or (not tmpl_defaults.get('disks')[0].get( + 'pool') and is_s390x()): + # Since libvirt pools are not supported on s390x + # No need to check for default pools on s390x + return
Can't we only do:
if is_s390x(): return
?
I didn't understand why the other conditions are needed.
I will test the code with your suggestion and resent the edited patch for review.
+ tmpl_defaults.get('disks') default_pool = tmpl_defaults['disks'][0]['pool']['name'] default_pool = default_pool.split('/')[-1]
@@ -437,9 +445,10 @@ class StoragePoolModel(object): for tmpl in templates: t_info = session.get('template', tmpl) for disk in t_info['disks']: - t_pool = disk['pool']['name'] - if pool_name_from_uri(t_pool) == pool_name: - return True + if 'pool' in disk: + t_pool = disk['pool']['name'] + if pool_name_from_uri(t_pool) == pool_name: + return True return False
def deactivate(self, name): diff --git a/model/storagevolumes.py b/model/storagevolumes.py index 4708674..d721d3b 100644 --- a/model/storagevolumes.py +++ b/model/storagevolumes.py @@ -44,7 +44,6 @@ from wok.plugins.kimchi.model.diskutils import set_disk_used_by from wok.plugins.kimchi.model.storagepools import StoragePoolModel from wok.plugins.kimchi.utils import get_next_clone_name
- VOLUME_TYPE_MAP = {0: 'file', 1: 'block', 2: 'directory', diff --git a/model/templates.py b/model/templates.py index 8df8c3b..c749f4b 100644 --- a/model/templates.py +++ b/model/templates.py @@ -28,13 +28,15 @@ import urlparse
from wok.exception import InvalidOperation, InvalidParameter from wok.exception import NotFoundError, OperationFailed -from wok.utils import probe_file_permission_as_user, run_setfacl_set_attr +from wok.utils import probe_file_permission_as_user +from wok.utils import run_setfacl_set_attr from wok.xmlutils.utils import xpath_get_text
from wok.plugins.kimchi.config import get_kimchi_version from wok.plugins.kimchi.kvmusertests import UserTests from wok.plugins.kimchi.model.cpuinfo import CPUInfoModel from wok.plugins.kimchi.utils import is_libvirtd_up, pool_name_from_uri +from wok.plugins.kimchi.utils import create_disk_image from wok.plugins.kimchi.vmtemplate import VMTemplate
ISO_TYPE = "ISO 9660 CD-ROM" @@ -400,15 +402,26 @@ class LibvirtVMTemplate(VMTemplate):
def fork_vm_storage(self, vm_uuid): # Provision storages: - vol_list = self.to_volume_list(vm_uuid) + disk_and_vol_list = self.to_volume_list(vm_uuid) try: - for v in vol_list: - pool = self._get_storage_pool(v['pool']) - # outgoing text to libvirt, encode('utf-8') - pool.createXML(v['xml'].encode('utf-8'), 0) + for v in disk_and_vol_list: + if v['pool'] is not None: + pool = self._get_storage_pool(v['pool']) + # outgoing text to libvirt, encode('utf-8') + pool.createXML(v['xml'].encode('utf-8'), 0) + else: + capacity = v['capacity'] + format_type = v['format'] + path = v['path'] + create_disk_image( + format_type=format_type, + path=path, + capacity=capacity) + except libvirt.libvirtError as e: raise OperationFailed("KCHVMSTOR0008E", {'error': e.message}) - return vol_list + + return disk_and_vol_list
def set_cpu_info(self): # undefined topology: consider these values to calculate maxvcpus diff --git a/model/vms.py b/model/vms.py index 7f607f5..3ad722e 100644 --- a/model/vms.py +++ b/model/vms.py @@ -61,7 +61,7 @@ from wok.plugins.kimchi.model.utils import remove_metadata_node from wok.plugins.kimchi.model.utils import set_metadata_node from wok.plugins.kimchi.osinfo import defaults, MEM_DEV_SLOTS from wok.plugins.kimchi.screenshot import VMScreenshot -from wok.plugins.kimchi.utils import get_next_clone_name +from wok.plugins.kimchi.utils import get_next_clone_name, is_s390x from wok.plugins.kimchi.utils import template_name_from_uri from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_node from wok.plugins.kimchi.xmlutils.bootorder import get_bootmenu_node @@ -1395,6 +1395,13 @@ class VMModel(object): except libvirt.libvirtError as e: wok_log.error('Unable to get storage volume by path: %s' % e.message) + try: + if is_s390x() and os.path.exists(path): + os.remove(path) + except Exception as e: + wok_log.error('Unable to delete storage path: %s' % + e.message) + except Exception as e: raise OperationFailed('KCHVOL0017E', {'err': e.message})
diff --git a/osinfo.py b/osinfo.py index 528cf14..d60cc15 100644 --- a/osinfo.py +++ b/osinfo.py @@ -158,6 +158,12 @@ def _get_tmpl_defaults(): 'maxmemory': _get_default_template_mem()} tmpl_defaults['storage']['disk.0'] = {'size': 10, 'format': 'qcow2', 'pool': 'default'} + is_on_s390x = True if _get_arch() == 's390x' else False + + if is_on_s390x: + tmpl_defaults['storage']['disk.0']['path'] = '/var/lib/libvirt/images/' + del tmpl_defaults['storage']['disk.0']['pool'] + tmpl_defaults['processor']['vcpus'] = 1 tmpl_defaults['processor']['maxvcpus'] = 1 tmpl_defaults['graphics'] = {'type': 'vnc', 'listen': '127.0.0.1'} @@ -165,7 +171,12 @@ def _get_tmpl_defaults(): default_config = ConfigObj(tmpl_defaults)
# Load template configuration file - config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf') + if is_on_s390x: + config_file = os.path.join( + kimchiPaths.sysconf_dir, + 'template_s390x.conf') + else: + config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf') config = ConfigObj(config_file)
# Merge default configuration with file configuration @@ -186,11 +197,39 @@ def _get_tmpl_defaults(): # Parse storage section to get disks values storage_section = default_config.pop('storage') defaults['disks'] = [] - for disk in storage_section.keys(): +
+ pool_exists = False + path_exists = False
Why do you need those flags?
Even to me it looks redundant. I will refactor the code and test it. If it works I will drop those flags and resend the patch.
+ for index, disk in enumerate(storage_section.keys()): data = storage_section[disk] data['index'] = int(disk.split('.')[1]) - data['pool'] = {"name": '/plugins/kimchi/storagepools/' + - storage_section[disk].pop('pool')} + # Right now 'Path' is only supported on s390x + if storage_section[disk].get('path') and is_on_s390x: + path_exists = True + data['path'] = storage_section[disk].pop('path') + if 'size' not in storage_section[disk]: + data['size'] = tmpl_defaults['storage']['disk.0']['size'] + else: + data['size'] = storage_section[disk].pop('size') + + if 'format' not in storage_section[disk]: + data['format'] = tmpl_defaults['storage']['disk.0']['format'] + else: + data['format'] = storage_section[disk].pop('format') + else: + storage_section[disk].get('pool') + pool_exists = True + data['pool'] = {"name": '/plugins/kimchi/storagepools/' + + storage_section[disk].pop('pool')} +
+ # If both pool and path don't exist, pick the defaults + if index == len(storage_section.keys()) - 1 and \ + (not pool_exists and not path_exists): + if is_on_s390x: # Special handling for s390x + data['path'] = tmpl_defaults['storage']['disk.0']['path'] + else: + data['pool'] = {"name": '/plugins/kimchi/storagepools/default'} +
Sorry, I couldn't understand why the above block is needed. Could you elaborate, please?
I was trying to set 'path' for s390x and 'pool' for all other archs if by chance they are not set. But if I get rid of the flags above then we may not need that piece of code.
defaults['disks'].append(data)
# Parse processor section to get vcpus and cpu_topology values diff --git a/utils.py b/utils.py index 26d3cf6..0fca191 100644 --- a/utils.py +++ b/utils.py @@ -24,6 +24,7 @@ import platform import re import sqlite3 import time +import os import urllib2 from httplib import HTTPConnection, HTTPException from urlparse import urlparse @@ -31,6 +32,7 @@ from urlparse import urlparse from wok.exception import InvalidParameter, OperationFailed from wok.plugins.kimchi import config from wok.plugins.kimchi.osinfo import get_template_default +from wok.stringutils import encode_value from wok.utils import run_command, wok_log from wok.xmlutils.utils import xpath_get_text
@@ -272,3 +274,35 @@ def is_libvirtd_up():
output, error, rc = run_command(cmd, silent=True) return True if output == 'active\n' else False + + +def is_s390x(): + """ + Check if current arch is 's390x' + Returns: + """ + if os.uname()[4] == 's390x': + return True + + return False + + +def create_disk_image(format_type, path, capacity): + """ + Create a disk image for the Guest + Args: + format: Format of the storage. e.g. qcow2 + path: Path where the virtual disk will be created + capacity: Capacity of the virtual disk in GBs + + Returns: + + """ + out, err, rc = run_command( + ["/usr/bin/qemu-img", "create", "-f", format_type, "-o", + "preallocation=metadata", path, encode_value(capacity) + "G"]) + + if rc != 0: + raise OperationFailed("KCHTMPL0035E", {'err': err}) + + return \ No newline at end of file diff --git a/vmtemplate.py b/vmtemplate.py index babf050..3b9eb32 100644 --- a/vmtemplate.py +++ b/vmtemplate.py @@ -31,7 +31,8 @@ from wok.exception import MissingParameter, OperationFailed from wok.plugins.kimchi import imageinfo from wok.plugins.kimchi import osinfo from wok.plugins.kimchi.isoinfo import IsoImage -from wok.plugins.kimchi.utils import check_url_path, pool_name_from_uri +from wok.plugins.kimchi.utils import check_url_path, is_s390x +from wok.plugins.kimchi.utils import pool_name_from_uri from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_xml from wok.plugins.kimchi.xmlutils.cpu import get_cpu_xml from wok.plugins.kimchi.xmlutils.disk import get_disk_xml @@ -42,6 +43,7 @@ from wok.plugins.kimchi.xmlutils.serial import get_serial_xml
class VMTemplate(object): + def __init__(self, args, scan=False, netboot=False): """ Construct a VM Template from a widely variable amount of information. @@ -95,35 +97,49 @@ class VMTemplate(object): disks = self.info.get('disks')
basic_disk = ['index', 'format', 'pool', 'size'] + basic_path_disk = ['index', 'format', 'path', 'size'] ro_disk = ['index', 'format', 'pool', 'volume'] base_disk = ['index', 'base', 'pool', 'size', 'format']
for index, disk in enumerate(disks): disk_info = dict(default_disk) - - pool = disk.get('pool', default_disk['pool']) - pool_type = self._get_storage_type(pool['name']) - - if pool_type in ['iscsi', 'scsi']: - disk_info = {'index': 0, 'format': 'raw', 'volume': None} - - disk_info.update(disk) - pool_name = disk_info.get('pool', {}).get('name') - if pool_name is None: - raise MissingParameter('KCHTMPL0028E') - - keys = sorted(disk_info.keys()) - if ((keys != sorted(basic_disk)) and (keys != sorted(ro_disk)) and - (keys != sorted(base_disk))): - raise MissingParameter('KCHTMPL0028E') - - if pool_type in ['logical', 'iscsi', 'scsi']: - if disk_info['format'] != 'raw': - raise InvalidParameter('KCHTMPL0029E') - - disk_info['pool']['type'] = pool_type - disk_info['index'] = disk_info.get('index', index) - self.info['disks'][index] = disk_info
+ if disk.get('pool'):
Maybe it is safer to check if the arch is not s390x.
We cannot check here for s390x, because we want user to have 'pool' on s390x; it's just that the default disk should not be of type 'pool'.
+ pool = disk.get('pool', default_disk.get('pool')) + pool_type = self._get_storage_type(pool['name']) + if pool_type in ['iscsi', 'scsi']: + disk_info = {'index': 0, 'format': 'raw', 'volume': None} + + disk_info.update(disk) + pool_name = disk_info.get('pool', {}).get('name') + if pool_name is None: + raise MissingParameter('KCHTMPL0028E') + + keys = sorted(disk_info.keys()) + if ((keys != sorted(basic_disk)) and + (keys != sorted(ro_disk)) and + (keys != sorted(base_disk)) and + (keys != basic_path_disk)): + raise MissingParameter('KCHTMPL0028E') + + if pool_type in ['logical', 'iscsi', 'scsi']: + if disk_info['format'] != 'raw': + raise InvalidParameter('KCHTMPL0029E') + + disk_info['pool']['type'] = pool_type + disk_info['index'] = disk_info.get('index', index) + self.info['disks'][index] = disk_info + elif is_s390x(): + # For now support 'path' only on s390x + path = disk.get('path', default_disk['path']) + disk_info.update(disk) + keys = sorted(disk_info.keys()) + if keys != sorted(basic_path_disk): + raise MissingParameter('KCHTMPL0036E') + disk_info['path'] = path + disk_info['index'] = disk_info.get('index', index) + self.info['disks'][index] = disk_info + else: + raise InvalidParameter('KCHTMPL0034E')
def _get_os_info(self, args, scan): distro = version = 'unknown' @@ -217,8 +233,9 @@ class VMTemplate(object): params = dict(base_disk_params) params['format'] = disk['format'] params['index'] = index - params.update(locals().get('%s_disk_params' % - disk['pool']['type'], {})) + if disk.get('pool'): + params.update(locals().get('%s_disk_params' % + disk['pool']['type'], {}))
volume = disk.get('volume') if volume is not None: @@ -226,9 +243,13 @@ class VMTemplate(object): volume) else: img = "%s-%s.img" % (vm_uuid, params['index']) - storage_path = self._get_storage_path(disk['pool']['name']) + if disk.get('pool'): + storage_path = self._get_storage_path(disk['pool']['name']) + params['pool_type'] = disk['pool']['type'] + elif disk.get('path'): + storage_path = disk.get('path') + params['pool_type'] = None params['path'] = os.path.join(storage_path, img) - params['pool_type'] = disk['pool']['type'] disks_xml += get_disk_xml(params)[1]
return unicode(disks_xml, 'utf-8') @@ -237,20 +258,24 @@ class VMTemplate(object): ret = [] for i, d in enumerate(self.info['disks']): # Create only .img. If storagepool is (i)SCSI, volumes will be LUNs - if d['pool']['type'] in ["iscsi", "scsi"]: + if 'pool' in d and d['pool']['type'] in ["iscsi", "scsi"]: continue
index = d.get('index', i) volume = "%s-%s.img" % (vm_uuid, index)
- storage_path = self._get_storage_path(d['pool']['name']) + if 'path' in d: + storage_path = d['path'] + else: + storage_path = self._get_storage_path(d['pool']['name']) + info = {'name': volume, 'capacity': d['size'], 'format': d['format'], 'path': '%s/%s' % (storage_path, volume), - 'pool': d['pool']['name']} + 'pool': d['pool']['name'] if 'pool' in d else None}
- if 'logical' == d['pool']['type'] or \ + if ('pool' in d and 'logical' == d['pool']['type']) or \ info['format'] not in ['qcow2', 'raw']: info['allocation'] = info['capacity'] else: @@ -447,8 +472,9 @@ class VMTemplate(object):
def validate(self): for disk in self.info.get('disks'): - pool_uri = disk.get('pool', {}).get('name') - self._get_storage_pool(pool_uri) + if 'pool' in disk: + pool_uri = disk.get('pool', {}).get('name') + self._get_storage_pool(pool_uri) self._network_validate() self._iso_validate() self.cpuinfo_validate() @@ -499,10 +525,11 @@ class VMTemplate(object):
# validate storagepools and image-based templates integrity for disk in self.info['disks']: - pool_uri = disk['pool']['name'] - pool_name = pool_name_from_uri(pool_uri) - if pool_name not in self._get_active_storagepools_name(): - invalid['storagepools'] = [pool_name] + if 'pool' in disk: + pool_uri = disk['pool']['name'] + pool_name = pool_name_from_uri(pool_uri) + if pool_name not in self._get_active_storagepools_name(): + invalid['storagepools'] = [pool_name]
if disk.get("base") is None: continue
participants (3)
-
Aline Manera -
Harshal -
harshalp＠linux.vnet.ibm.com