Re: [ovirt-users] Hosted-engine-Issue

I found the solution ,promiscuous mode was rejecting the packets this was causing the issue ,enabled and now able to ping without any issues. Thanks for the support ! On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; wrote: > HI > > Any updates issue is blocking ? > > Thanks, > Nagaraju > > > On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; > wrote: > >> Below are the details, unable to ping the gateway from the ovirt engine >> ,able to ping the ovirt engine from host as both are there in the same >> network. >> >> >> [root@oe ~]# ip addr >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >> inet 127.0.0.1/8 scope host lo >> inet6 ::1/128 scope host >> valid_lft forever preferred_lft forever >> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >> state UP qlen 1000 >> link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff >> inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0 >> inet6 fe80::216:3eff:fe33:38e5/64 scope link >> valid_lft forever preferred_lft forever >> [root@oe ~]# >> [root@oe ~]# >> [root@oe ~]# >> [root@oe ~]# ip route >> 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9 >> 169.254.0.0/16 dev eth0 scope link metric 1002 >> default via 10.206.67.254 dev eth0 >> [root@oe ~]# >> [root@oe ~]# >> [root@oe ~]# >> [root@oe ~]# brctl show >> bridge name bridge id STP enabled interfaces >> [root@oe ~]# >> >> >> >> >> >> >> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi(a)redhat.com&gt; >> wrote: >> >>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >>> wrote: >>> > HI >>> > >>> > Installed hosted engine and after configuring IP to ovirt engine >>> unable to >>> > ping the gateway and found that there is no issue with the Network . >>> >>> You mean that from inside the engine machine, you cannot ping the >>> gateway? >>> >>> Can you ping it from the host? >>> >>> Please share output of these commands, from both the host and the >>> engine vm: >>> >>> ip addr >>> ip route >>> brctl show >>> >>> Thanks, >>> >>> > >>> > Is there any thing am missing while installing Hosted engine ? below >>> is >>> > output details, >>> > >>> > >>> > --== CONFIGURATION PREVIEW ==-- >>> > >>> > Engine FQDN : oe.bnglab.psecure.net >>> > Bridge name : ovirtmgmt >>> > SSH daemon port : 22 >>> > Gateway address : 10.206.67.254 >>> > Host name for web application : hosted_engine_1 >>> > Host ID : 1 >>> > Image alias : hosted_engine >>> > Image size GB : 25 >>> > Storage connection : 10.204.207.152: >>> /home/heoe >>> > Console type : vnc >>> > Memory size MB : 4096 >>> > MAC address : 00:16:3e:2f:5c:40 >>> > Boot type : cdrom >>> > Number of CPUs : 2 >>> > ISO image (for cdrom boot) : >>> > /ovirt/CentOS-6.7-x86_64-minimal.iso >>> > CPU Type : model_SandyBridge >>> > >>> > Please confirm installation settings (Yes, No)[Yes]: yes >>> > [ INFO ] Stage: Transaction setup >>> > [ INFO ] Stage: Misc configuration >>> > [ INFO ] Stage: Package installation >>> > [ INFO ] Stage: Misc configuration >>> > [ INFO ] Configuring libvirt >>> > [ INFO ] Configuring VDSM >>> > [ INFO ] Starting vdsmd >>> > [ INFO ] Waiting for VDSM hardware info >>> > [ INFO ] Waiting for VDSM hardware info >>> > [ INFO ] Creating Storage Domain >>> > [ INFO ] Creating Storage Pool >>> > [ INFO ] Connecting Storage Pool >>> > [ INFO ] Verifying sanlock lockspace initialization >>> > [ INFO ] Creating VM Image >>> > [ INFO ] Disconnecting Storage Pool >>> > [ INFO ] Start monitoring domain >>> > [ INFO ] Configuring VM >>> > [ INFO ] Updating hosted-engine configuration >>> > [ INFO ] Stage: Transaction commit >>> > [ INFO ] Stage: Closing up >>> > The following network ports should be opened: >>> > tcp:5900 >>> > tcp:5901 >>> > udp:5900 >>> > udp:5901 >>> > An example of the required configuration for iptables can >>> be found >>> > at: >>> > /etc/ovirt-hosted-engine/iptables.example >>> > In order to configure firewalld, copy the files from >>> > /etc/ovirt-hosted-engine/firewalld to >>> /etc/firewalld/services >>> > and execute the following commands: >>> > firewall-cmd -service hosted-console >>> > [ INFO ] Creating VM >>> > You can now connect to the VM with the following command: >>> > /usr/bin/remote-viewer vnc://localhost:5900 >>> > Use temporary password "2049ZfXr" to connect to vnc console. >>> > Please note that in order to use remote-viewer you need to >>> be able >>> > to run graphical applications. >>> > This means that if you are using ssh you have to supply the >>> -Y >>> > flag (enables trusted X11 forwarding). >>> > Otherwise you can run the command from a terminal in your >>> > preferred desktop environment. >>> > If you cannot run graphical applications you can connect to >>> the >>> > graphic console from another host or connect to the console using the >>> > following command: >>> > virsh -c qemu+tls://Test/system console HostedEngine >>> > If you need to reboot the VM you will need to start it >>> manually >>> > using the command: >>> > hosted-engine --vm-start >>> > You can then set a temporary password using the command: >>> > hosted-engine --add-console-password >>> > The VM has been started. Install the OS and shut down or >>> reboot >>> > it. To continue please make a selection: >>> > >>> > (1) Continue setup - VM installation is complete >>> > (2) Reboot the VM and restart installation >>> > (3) Abort setup >>> > (4) Destroy VM and abort setup >>> > >>> > _______________________________________________ >>> > Users mailing list >>> > Users(a)ovirt.org >>> > http://lists.ovirt.org/mailman/listinfo/users >>> > >>> >>> >>> >>> -- >>> Didi >>> >> >> >