Re: [Users] Problem install

Hi Marcelo Let's try something else. Run sed -i 's/\#WDMDOPTS/WDMDOPTS/g' /etc/sysconfig/wdmd And try running the setup again. On Tue, Mar 19, 2013 at 4:26 PM, Marcelo Barbosa < mr.marcelo.barbosa(a)gmail.com&gt; wrote: > Alex, > > Follows the file: > > [root@firelap marcelo.barbosa]# cat /etc/sysconfig/wdmd > # WDMDOPTS -- set the command line options for the wdmd daemon > # See wdmd man page for full list of command line options. > # > # Include "-G sanlock" in the option string. > # > # To enable use of test scripts > #WDMDOPTS="-G sanlock -S 1" > # > # To select a specific watchdog device > #WDMDOPTS="-G sanlock -w /dev/watchdog1" > > I tried again, but error: > > 2013-03-19 11:05:33::ERROR::engine-setup:**:2385::root:: Traceback (most > recent call last): > File "/bin/engine-setup", line 2379, in <module> > main(confFile) > File "/bin/engine-setup", line 2162, in main > runSequences() > File "/bin/engine-setup", line 2085, in runSequences > controller.runAllSequences() > File "/usr/share/ovirt-engine/**scripts/setup_controller.py", line 54, > in runAllSequences > sequence.run() > File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line 154, > in run > step.run() > File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line 60, > in run > function() > File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", > line 300, in waitForHostUp > utils.retry(isHostUp, tries=120, timeout=600, sleep=5) > File "/usr/share/ovirt-engine/**scripts/common_utils.py", line 1009, > in retry > raise e > RetryFailException: Error: Host was found in a 'Failed' state. Please > check engine and bootstrap installation logs. > > Full ERROR/LOG in attached. > > More informations about my enviroment: > > [root@firelap marcelo.barbosa]# rpm -qa | grep -i ovirt-engine > ovirt-engine-setup-plugin-**allinone-3.2.1-1.fc18.noarch > ovirt-engine-backend-3.2.1-1.**fc18.noarch > ovirt-engine-restapi-3.2.1-1.**fc18.noarch > ovirt-engine-genericapi-3.2.1-**1.fc18.noarch > ovirt-engine-cli-3.2.0.11-1.**fc18.noarch > ovirt-engine-3.2.1-1.fc18.**noarch > ovirt-engine-setup-3.2.1-1.**fc18.noarch > ovirt-engine-dbscripts-3.2.1-**1.fc18.noarch > ovirt-engine-sdk-3.2.0.10-1.**fc18.noarch > ovirt-engine-userportal-3.2.1-**1.fc18.noarch > ovirt-engine-webadmin-portal-**3.2.1-1.fc18.noarch > ovirt-engine-tools-3.2.1-1.**fc18.noarch > > [root@firelap marcelo.barbosa]# cat /etc/hosts > 127.0.0.1 localhost localhost.localdomain localhost4 > localhost4.localdomain4 > ::1 localhost localhost.localdomain localhost6 > localhost6.localdomain6 > 172.16.255.54 firelap firelap.local > > [root@firelap marcelo.barbosa]# ifconfig > bond0: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 > ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > bond1: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 > ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > bond2: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 > ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > bond3: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 > ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > bond4: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 > ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 0 (Local Loopback) > RX packets 115968 bytes 34730071 (33.1 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 115968 bytes 34730071 (33.1 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > p5p1: flags=4163<UP,BROADCAST,**RUNNING,MULTICAST> mtu 1500 > inet 172.16.255.54 netmask 255.255.255.192 broadcast > 172.16.255.63 > inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link> > ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet) > RX packets 1785531 bytes 2623497125 (2.4 GiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 975613 bytes 76733377 (73.1 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > device interrupt 17 > > Forever run engine-cleanup before engine-setup > > [root@localhost ~]# engine-setup > Welcome to oVirt Engine setup utility > oVirt Engine uses httpd to proxy requests to the application server. > It looks like the httpd installed locally is being actively used. > The installer can override current configuration . > Alternatively you can use JBoss directly (on ports higher than 1024) > Do you wish to override current httpd configuration and restart the > service? ['yes'| 'no'] [yes] : > HTTP Port [80] : > HTTPS Port [443] : > Host fully qualified domain name. Note: this name should be fully > resolvable [firelap.local] : > firelap.local did not resolve into an IP address > User input failed validation, do you still wish to use it? (yes|no): yes > Enter a password for an internal oVirt Engine administrator user > (admin@internal) : > Warning: Weak Password. > Confirm password : > Organization Name for the Certificate [local] : > The engine can be configured to present the UI in three different > application modes. virt [Manage virtualization only], gluster [Manage > gluster storage only], and both [Manage virtualization as well as gluster > storage] ['virt'| 'gluster'| 'both'] [both] : > The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'| > 'POSIXFS'] [NFS] : > Enter DB type for installation ['remote'| 'local'] [local] : > Enter a password for a local oVirt Engine DB admin user (engine) : > Warning: Weak Password. > Confirm password : > Error: passwords don't match > Enter a password for a local oVirt Engine DB admin user (engine) : > Warning: Weak Password. > Confirm password : > Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso > Error: mount point already exists in /etc/exports > Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso > Firewall ports need to be opened. > The installer can configure firewall automatically overriding the current > configuration. The old configuration will be backed up. > Alternately you can configure the firewall later using an example file. > Which firewall do you wish to configure? ['None'| 'Firewalld'| > 'IPTables']: IPTables > Configure VDSM on this host? ['yes'| 'no'] [yes] : > Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms > Confirm root password : > > oVirt Engine will be installed using the following configuration: > ==============================**==============================**===== > override-httpd-config: yes > http-port: 80 > https-port: 443 > host-fqdn: firelap.local > auth-pass: ******** > org-name: local > application-mode: both > default-dc-type: NFS > db-remote-install: local > db-local-pass: ******** > nfs-mp: /firebackup/ovirt/iso > override-firewall: IPTables > config-allinone: yes > storage-path: /firebackup/ovirt/vms > superuser-pass: ******** > Proceed with the configuration listed above? (yes|no): yes > > Installing: > AIO: Validating CPU Compatibility... [ DONE ] > AIO: Adding firewall rules... [ DONE ] > Configuring oVirt Engine... [ DONE ] > Configuring JVM... [ DONE ] > Creating CA... [ DONE ] > Updating ovirt-engine service... [ DONE ] > Setting Database Configuration... [ DONE ] > Setting Database Security... [ DONE ] > Creating Database... [ DONE ] > Updating the Default Data Center Storage Type... [ DONE ] > Editing oVirt Engine Configuration... [ DONE ] > Editing Postgresql Configuration... [ DONE ] > Configuring the Default ISO Domain... [ DONE ] > Configuring Firewall... [ DONE ] > Starting ovirt-engine Service... [ DONE ] > Configuring HTTPD... [ DONE ] > AIO: Creating storage directory... [ DONE ] > AIO: Adding Local Datacenter and cluster... [ DONE ] > AIO: Adding Local host (This may take several minutes)... [ ERROR ] > Error: Host was found in a 'Failed' state. Please check engine and > bootstrap installation logs. > Please check log file /var/log/ovirt-engine/engine-**setup_2013_03_19_11_00_51.log > for more information > > Let me know if you need any additional tests, thank you for attention. > > Marcelo Barbosa > mr.marcelo.barbosa(a)gmail.com > > > On Tue, Mar 19, 2013 at 10:51 AM, Marcelo Barbosa < > mr.marcelo.barbosa(a)gmail.com&gt; wrote: > >> Alex, >> >> i am check: >> >> # rpm -qa | grep sanlock >> sanlock-2.6-7.fc18.x86_64 >> libvirt-lock-sanlock-0.10.2.3-**1.fc18.x86_64 >> sanlock-lib-2.6-7.fc18.x86_64 >> sanlock-python-2.6-7.fc18.x86_**64 >> >> you would like make reinstall ? I can try again... >> >> Marcelo Barbosa >> mr.marcelo.barbosa(a)gmail.com >> >> >> On Tue, Mar 19, 2013 at 10:30 AM, Alex Lourie <alourie(a)redhat.com&gt; >> wrote: >> >>> Hi Marcelo >>> >>> Can you please check that you have sanlock-2.6-7 installed? >>> >>> Thanks. >>> >>> On Wed, Mar 6, 2013 at 10:51 PM, Marcelo Barbosa < >>> mr.marcelo.barbosa(a)gmail.com&gt; wrote: >>> >>>> Alex, >>>> >>>> Thankyou for attention. This return should not happen, because I >>>> have my hostname registered and running on my DNS servers, but i'm inserted >>>> in /etc/hosts my hostname and retry setup, but return new error: >>>> >>>> >>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::297::root:: Waiting for >>>> host to become operational >>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::300::root:: current >>>> host status is: up >>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::302::root:: The host is >>>> up. >>>> 2013-03-06 17:35:14::DEBUG::setup_**sequences::59::root:: running >>>> addStorageDomain >>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::317::root:: Adding >>>> local storage domain >>>> 2013-03-06 17:35:14::INFO::all_in_one_**100::322::root:: Creating >>>> local storage >>>> 2013-03-06 17:35:14::INFO::all_in_one_**100::326::root:: Creating >>>> local storage domain >>>> 2013-03-06 17:35:14::INFO::all_in_one_**100::334::root:: Adding local >>>> storage domain >>>> 2013-03-06 17:35:15::ERROR::all_in_one_**100::337::root:: Traceback >>>> (most recent call last): >>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>> line 335, in addStorageDomain >>>> controller.CONF["API_OBJECT"].**storagedomains.add(sdParams) >>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/brokers.py", >>>> line 5151, in add >>>> headers={"Expect":expect, "Correlation-Id":correlation_**id}) >>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/proxy.py", >>>> line 118, in add >>>> return self.request('POST', url, body, headers) >>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/proxy.py", >>>> line 129, in request >>>> last=last) >>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/proxy.py", >>>> line 159, in __doRequest >>>> raise RequestError, response >>>> RequestError: >>>> status: 400 >>>> reason: Bad Request >>>> detail: Cannot add Storage. Internal error, Storage Connection doesn't >>>> exist. >>>> >>>> 2013-03-06 17:35:15::DEBUG::setup_**sequences::62::root:: Traceback >>>> (most recent call last): >>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line >>>> 60, in run >>>> function() >>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>> line 338, in addStorageDomain >>>> raise Exception(ERROR_ADD_LOCAL_**DOMAIN) >>>> Exception: Error: could not add local storage domain >>>> >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1948::root:: *** The >>>> following params were used as user input: >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> override-httpd-config: yes >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: http-port: 80 >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: https-port: >>>> 443 >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> random-passwords: no >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: mac-range: >>>> 00:1A:4A:10:FF:00-00:1A:4A:10:**FF:FF >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: host-fqdn: >>>> firelap.usc.unirede.net >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: auth-pass: >>>> ******** >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: org-name: >>>> firelap >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> application-mode: both >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> default-dc-type: NFS >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> db-remote-install: local >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: db-host: >>>> localhost >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> db-local-pass: ******** >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: nfs-mp: >>>> /firebackup/********/iso >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> iso-domain-name: ISO_DOMAIN >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: config-nfs: >>>> yes >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> override-firewall: IPTables >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> config-allinone: yes >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> storage-path: /firebackup/********/vms >>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: >>>> superuser-pass: ******** >>>> 2013-03-06 17:35:15::ERROR::engine-setup:**:2369::root:: Traceback >>>> (most recent call last): >>>> File "/bin/engine-setup", line 2363, in <module> >>>> main(confFile) >>>> File "/bin/engine-setup", line 2146, in main >>>> runSequences() >>>> File "/bin/engine-setup", line 2068, in runSequences >>>> controller.runAllSequences() >>>> File "/usr/share/ovirt-engine/**scripts/setup_controller.py", line >>>> 54, in runAllSequences >>>> sequence.run() >>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line >>>> 154, in run >>>> step.run() >>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line >>>> 60, in run >>>> function() >>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>> line 338, in addStorageDomain >>>> raise Exception(ERROR_ADD_LOCAL_**DOMAIN) >>>> Exception: Error: could not add local storage domain >>>> >>>> Any ideas to solve this problem? >>>> >>>> Marcelo Barbosa >>>> mr.marcelo.barbosa(a)gmail.com >>>> >>>> >>>> On Wed, Mar 6, 2013 at 4:23 PM, Alexandre Santos <santosam72(a)gmail.com&gt; >>>> wrote: >>>> >>>>> Hi. Have you tried solving the hostnames resolving issues that are >>>>> described on your email? Add the hosts to /etc/hosts >>>>> >>>>> Alex >>>>> >>>>> No dia 06/03/2013 18:02, "Marcelo Barbosa" < >>>>> mr.marcelo.barbosa(a)gmail.com&gt; escreveu: >>>>> >>>>>> Attached my log file. >>>>>> >>>>>> Marcelo Barbosa >>>>>> mr.marcelo.barbosa(a)gmail.com >>>>>> >>>>>> >>>>>> On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa < >>>>>> mr.marcelo.barbosa(a)gmail.com&gt; wrote: >>>>>> >>>>>>> hi guys, >>>>>>> >>>>>>> I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but >>>>>>> this version not finish for sucessful install, information my enviroment: >>>>>>> >>>>>>> [root@firelap ovirt]# cat /etc/redhat-release >>>>>>> Fedora release 18 (Spherical Cow) >>>>>>> >>>>>>> [root@firelap ovirt]# uname -a >>>>>>> Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC >>>>>>> 2013 x86_64 x86_64 x86_64 GNU/Linux >>>>>>> >>>>>>> [root@firelap ovirt]# ifconfig >>>>>>> bond0: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 >>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >>>>>>> RX packets 0 bytes 0 (0.0 B) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 0 bytes 0 (0.0 B) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> >>>>>>> bond1: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 >>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >>>>>>> RX packets 0 bytes 0 (0.0 B) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 0 bytes 0 (0.0 B) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> >>>>>>> bond2: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 >>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >>>>>>> RX packets 0 bytes 0 (0.0 B) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 0 bytes 0 (0.0 B) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> >>>>>>> bond3: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 >>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >>>>>>> RX packets 0 bytes 0 (0.0 B) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 0 bytes 0 (0.0 B) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> >>>>>>> bond4: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500 >>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >>>>>>> RX packets 0 bytes 0 (0.0 B) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 0 bytes 0 (0.0 B) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> >>>>>>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 >>>>>>> inet 127.0.0.1 netmask 255.0.0.0 >>>>>>> inet6 ::1 prefixlen 128 scopeid 0x10<host> >>>>>>> loop txqueuelen 0 (Local Loopback) >>>>>>> RX packets 136972 bytes 54834621 (52.2 MiB) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 136972 bytes 54834621 (52.2 MiB) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> >>>>>>> p5p1: flags=4163<UP,BROADCAST,**RUNNING,MULTICAST> mtu 1500 >>>>>>> inet 172.16.255.43 netmask 255.255.255.192 broadcast >>>>>>> 172.16.255.63 >>>>>>> inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid >>>>>>> 0x20<link> >>>>>>> ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet) >>>>>>> RX packets 480681 bytes 614801393 (586.3 MiB) >>>>>>> RX errors 0 dropped 0 overruns 0 frame 0 >>>>>>> TX packets 323373 bytes 35479386 (33.8 MiB) >>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>>>> device interrupt 17 >>>>>>> >>>>>>> [root@firelap ovirt]# rpm -qa | grep ovirt >>>>>>> ovirt-engine-cli-3.2.0.10-1.**fc18.noarch >>>>>>> ovirt-engine-backend-3.2.0-4.**fc18.noarch >>>>>>> ovirt-engine-config-3.2.0-4.**fc18.noarch >>>>>>> ovirt-host-deploy-1.0.0-1.**fc18.noarch >>>>>>> ovirt-engine-setup-plugin-**allinone-3.2.0-4.fc18.noarch >>>>>>> ovirt-engine-restapi-3.2.0-4.**fc18.noarch >>>>>>> ovirt-engine-dbscripts-3.2.0-**4.fc18.noarch >>>>>>> ovirt-image-uploader-3.2.0-1.**fc18.noarch >>>>>>> ovirt-host-deploy-offline-1.0.**0-1.fc18.noarch >>>>>>> ovirt-engine-setup-3.2.0-4.**fc18.noarch >>>>>>> ovirt-release-fedora-5-3.**noarch >>>>>>> ovirt-engine-tools-common-3.2.**0-4.fc18.noarch >>>>>>> ovirt-engine-3.2.0-4.fc18.**noarch >>>>>>> ovirt-log-collector-3.2.0-1.**fc18.noarch >>>>>>> ovirt-host-deploy-java-1.0.0-**1.fc18.noarch >>>>>>> ovirt-engine-userportal-3.2.0-**4.fc18.noarch >>>>>>> ovirt-engine-notification-**service-3.2.0-4.fc18.noarch >>>>>>> ovirt-iso-uploader-3.2.0-1.**fc18.noarch >>>>>>> ovirt-engine-webadmin-portal-**3.2.0-4.fc18.noarch >>>>>>> ovirt-engine-sdk-3.2.0.9-1.**fc18.noarch >>>>>>> ovirt-engine-genericapi-3.2.0-**4.fc18.noarch >>>>>>> >>>>>>> [root@firelap ~]# host firelap.usc.unirede.net >>>>>>> firelap.usc.unirede.net has address 172.16.255.43 >>>>>>> >>>>>>> [root@firelap ~]# ping firelap.usc.unirede.net >>>>>>> PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data. >>>>>>> 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 >>>>>>> time=0.055 ms >>>>>>> >>>>>>> [root@firelap ~]# engine-setup >>>>>>> Welcome to oVirt Engine setup utility >>>>>>> oVirt Engine uses httpd to proxy requests to the application server. >>>>>>> It looks like the httpd installed locally is being actively used. >>>>>>> The installer can override current configuration . >>>>>>> Alternatively you can use JBoss directly (on ports higher than 1024) >>>>>>> Do you wish to override current httpd configuration and restart the >>>>>>> service? ['yes'| 'no'] [yes] : >>>>>>> HTTP Port [80] : >>>>>>> HTTPS Port [443] : >>>>>>> Host fully qualified domain name. Note: this name should be fully >>>>>>> resolvable [firelap.no-ip.org] : localhost.localdomain >>>>>>> The IP (127.0.0.1) which was resolved from the FQDN >>>>>>> localhost.localdomain is not configured on any interface on this host >>>>>>> User input failed validation, do you still wish to use it? >>>>>>> (yes|no): no >>>>>>> Host fully qualified domain name. Note: this name should be fully >>>>>>> resolvable [firelap.no-ip.org] : >>>>>>> firelap.no-ip.org did not resolve into an IP address >>>>>>> User input failed validation, do you still wish to use it? >>>>>>> (yes|no): no >>>>>>> Host fully qualified domain name. Note: this name should be fully >>>>>>> resolvable [firelap.no-ip.org] : firelap.usc.unirede.net >>>>>>> Enter a password for an internal oVirt Engine administrator user >>>>>>> (admin@internal) : >>>>>>> Warning: Weak Password. >>>>>>> Confirm password : >>>>>>> Organization Name for the Certificate [no-ip.org] : >>>>>>> firelap.usc.unirede.net >>>>>>> The engine can be configured to present the UI in three different >>>>>>> application modes. virt [Manage virtualization only], gluster [Manage >>>>>>> gluster storage only], and both [Manage virtualization as well as gluster >>>>>>> storage] ['virt'| 'gluster'| 'both'] [both] : >>>>>>> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'| >>>>>>> 'POSIXFS'] [NFS] : >>>>>>> Enter DB type for installation ['remote'| 'local'] [local] : >>>>>>> Enter a password for a local oVirt Engine DB admin user (engine) : >>>>>>> Warning: Weak Password. >>>>>>> Confirm password : >>>>>>> Local ISO domain path [/var/lib/exports/iso] : >>>>>>> /firebackup/ovirt/iso >>>>>>> Error: directory /firebackup/ovirt/iso is not empty >>>>>>> Local ISO domain path [/var/lib/exports/iso] : >>>>>>> /firebackup/ovirt/iso >>>>>>> Firewall ports need to be opened. >>>>>>> The installer can configure firewall automatically overriding the >>>>>>> current configuration. The old configuration will be backed up. >>>>>>> Alternately you can configure the firewall later using an example >>>>>>> file. >>>>>>> Which firewall do you wish to configure? ['None'| 'Firewalld'| >>>>>>> 'IPTables']: IPTables >>>>>>> Configure VDSM on this host? ['yes'| 'no'] [yes] : >>>>>>> Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms >>>>>>> Confirm root password : >>>>>>> >>>>>>> oVirt Engine will be installed using the following configuration: >>>>>>> ==============================**==============================** >>>>>>> ===== >>>>>>> override-httpd-config: yes >>>>>>> http-port: 80 >>>>>>> https-port: 443 >>>>>>> host-fqdn: firelap.usc.unirede.net >>>>>>> auth-pass: ******** >>>>>>> org-name: firelap.usc.unirede.net >>>>>>> application-mode: both >>>>>>> default-dc-type: NFS >>>>>>> db-remote-install: local >>>>>>> db-local-pass: ******** >>>>>>> nfs-mp: /firebackup/ovirt/iso >>>>>>> override-firewall: IPTables >>>>>>> config-allinone: yes >>>>>>> storage-path: /firebackup/ovirt/vms >>>>>>> superuser-pass: ******** >>>>>>> Proceed with the configuration listed above? (yes|no): yes >>>>>>> >>>>>>> Installing: >>>>>>> AIO: Validating CPU Compatibility... [ >>>>>>> DONE ] >>>>>>> AIO: Adding firewall rules... [ >>>>>>> DONE ] >>>>>>> Configuring oVirt Engine... [ >>>>>>> DONE ] >>>>>>> Configuring JVM... [ >>>>>>> DONE ] >>>>>>> Creating CA... [ >>>>>>> DONE ] >>>>>>> Updating ovirt-engine service... [ >>>>>>> DONE ] >>>>>>> Setting Database Configuration... [ >>>>>>> DONE ] >>>>>>> Setting Database Security... [ >>>>>>> DONE ] >>>>>>> Creating Database... [ >>>>>>> DONE ] >>>>>>> Updating the Default Data Center Storage Type... [ >>>>>>> DONE ] >>>>>>> Editing oVirt Engine Configuration... [ >>>>>>> DONE ] >>>>>>> Editing Postgresql Configuration... [ >>>>>>> DONE ] >>>>>>> Configuring the Default ISO Domain... [ >>>>>>> DONE ] >>>>>>> Configuring Firewall... [ >>>>>>> DONE ] >>>>>>> Starting ovirt-engine Service... [ >>>>>>> DONE ] >>>>>>> Configuring HTTPD... [ >>>>>>> DONE ] >>>>>>> AIO: Creating storage directory... [ >>>>>>> DONE ] >>>>>>> AIO: Adding Local Datacenter and cluster... [ >>>>>>> DONE ] >>>>>>> AIO: Adding Local host (This may take several minutes)... [ >>>>>>> ERROR ] >>>>>>> Error: Host was found in a 'Failed' state. Please check engine and >>>>>>> bootstrap installation logs. >>>>>>> Please check log file /var/log/ovirt-engine/engine-**setup_2013_03_06_14_30_51.log >>>>>>> for more information >>>>>>> >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:474::root:: retcode = 0 >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1238::root:: stopping >>>>>>> httpd >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1275::root:: executing >>>>>>> action httpd on service stop >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:434::root:: Executing >>>>>>> command --> '/sbin/service httpd stop' >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:472::root:: output = >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:473::root:: stderr = >>>>>>> Redirecting to /bin/systemctl stop httpd.service >>>>>>> >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:474::root:: retcode = 0 >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1228::root:: starting >>>>>>> httpd >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1275::root:: executing >>>>>>> action httpd on service start >>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:434::root:: Executing >>>>>>> command --> '/sbin/service httpd start' >>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:472::root:: output = >>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:473::root:: stderr = >>>>>>> Redirecting to /bin/systemctl start httpd.service >>>>>>> >>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:474::root:: retcode = 0 >>>>>>> 2013-03-06 14:35:36::DEBUG::setup_**sequences::59::root:: running >>>>>>> makeStorageDir >>>>>>> 2013-03-06 14:35:36::DEBUG::all_in_one_**100::368::root:: >>>>>>> Creating/Verifying local domain path >>>>>>> 2013-03-06 14:35:36::DEBUG::all_in_one_**100::374::root:: Setting >>>>>>> selinux context >>>>>>> 2013-03-06 14:35:36::DEBUG::nfsutils::36:**:root:: setting selinux >>>>>>> context for /firebackup/ovirt/vms >>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:434::root:: Executing >>>>>>> command --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t >>>>>>> /firebackup/ovirt/vms(/.*)?' >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:472::root:: output = >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:473::root:: stderr = >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:474::root:: retcode = 0 >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:434::root:: Executing >>>>>>> command --> '/sbin/restorecon -r /firebackup/ovirt/vms' >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:472::root:: output = >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:473::root:: stderr = >>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:474::root:: retcode = 0 >>>>>>> 2013-03-06 14:35:39::DEBUG::setup_**sequences::59::root:: running >>>>>>> waitForJbossUp >>>>>>> 2013-03-06 14:35:39::DEBUG::all_in_one_**100::445::root:: Checking >>>>>>> JBoss status. >>>>>>> 2013-03-06 14:35:39::INFO::all_in_one_**100::448::root:: JBoss is >>>>>>> up and running. >>>>>>> 2013-03-06 14:35:39::DEBUG::setup_**sequences::59::root:: running >>>>>>> initAPI >>>>>>> 2013-03-06 14:35:39::DEBUG::all_in_one_**100::240::root:: >>>>>>> Initiating the API object >>>>>>> 2013-03-06 14:35:41::DEBUG::setup_**sequences::59::root:: running >>>>>>> createDC >>>>>>> 2013-03-06 14:35:41::DEBUG::all_in_one_**100::256::root:: Creating >>>>>>> the local datacenter >>>>>>> 2013-03-06 14:35:42::DEBUG::setup_**sequences::59::root:: running >>>>>>> createCluster >>>>>>> 2013-03-06 14:35:42::DEBUG::all_in_one_**100::267::root:: Creating >>>>>>> the local cluster >>>>>>> 2013-03-06 14:35:43::DEBUG::setup_**sequences::59::root:: running >>>>>>> createHost >>>>>>> 2013-03-06 14:35:43::DEBUG::all_in_one_**100::280::root:: Adding >>>>>>> the local host >>>>>>> 2013-03-06 14:35:44::DEBUG::setup_**sequences::59::root:: running >>>>>>> waitForHostUp >>>>>>> 2013-03-06 14:35:44::DEBUG::all_in_one_**100::297::root:: Waiting >>>>>>> for host to become operational >>>>>>> 2013-03-06 14:35:45::DEBUG::all_in_one_**100::300::root:: current >>>>>>> host status is: installing >>>>>>> 2013-03-06 14:35:45::DEBUG::all_in_one_**100::311::root:: >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>>>>> line 308, in isHostUp >>>>>>> raise Exception(INFO_CREATE_HOST_**WAITING_UP) >>>>>>> Exception: Waiting for the host to start >>>>>>> >>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_**100::297::root:: Waiting >>>>>>> for host to become operational >>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_**100::300::root:: current >>>>>>> host status is: installing >>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_**100::311::root:: >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>>>>> line 308, in isHostUp >>>>>>> raise Exception(INFO_CREATE_HOST_**WAITING_UP) >>>>>>> Exception: Waiting for the host to start >>>>>>> >>>>>>> 2013-03-06 14:35:55::DEBUG::all_in_one_**100::297::root:: Waiting >>>>>>> for host to become operational >>>>>>> 2013-03-06 14:35:56::DEBUG::all_in_one_**100::300::root:: current >>>>>>> host status is: install_failed >>>>>>> 2013-03-06 14:35:56::DEBUG::all_in_one_**100::311::root:: >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>>>>> line 306, in isHostUp >>>>>>> raise utils.RetryFailException(**ERROR_CREATE_HOST_FAILED) >>>>>>> RetryFailException: Error: Host was found in a 'Failed' state. >>>>>>> Please check engine and bootstrap installation logs. >>>>>>> >>>>>>> 2013-03-06 14:35:56::DEBUG::setup_**sequences::62::root:: >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", >>>>>>> line 60, in run >>>>>>> function() >>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>>>>> line 294, in waitForHostUp >>>>>>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5) >>>>>>> File "/usr/share/ovirt-engine/**scripts/common_utils.py", line >>>>>>> 1009, in retry >>>>>>> raise e >>>>>>> RetryFailException: Error: Host was found in a 'Failed' state. >>>>>>> Please check engine and bootstrap installation logs. >>>>>>> >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1948::root:: *** The >>>>>>> following params were used as user input: >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> override-httpd-config: yes >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> http-port: 80 >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> https-port: 443 >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> random-passwords: no >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:**FF:FF >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> host-fqdn: firelap.usc.unirede.net >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> auth-pass: ******** >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: org-name: >>>>>>> firelap.usc.unirede.net >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> application-mode: both >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> default-dc-type: NFS >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> db-remote-install: local >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: db-host: >>>>>>> localhost >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> db-local-pass: ******** >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: nfs-mp: >>>>>>> /firebackup/********/iso >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> iso-domain-name: ISO_DOMAIN >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> config-nfs: yes >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> override-firewall: IPTables >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> config-allinone: yes >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> storage-path: /firebackup/********/vms >>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: >>>>>>> superuser-pass: ******** >>>>>>> 2013-03-06 14:35:56::ERROR::engine-setup:**:2369::root:: Traceback >>>>>>> (most recent call last): >>>>>>> File "/bin/engine-setup", line 2363, in <module> >>>>>>> main(confFile) >>>>>>> File "/bin/engine-setup", line 2146, in main >>>>>>> runSequences() >>>>>>> File "/bin/engine-setup", line 2068, in runSequences >>>>>>> controller.runAllSequences() >>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_controller.py", >>>>>>> line 54, in runAllSequences >>>>>>> sequence.run() >>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", >>>>>>> line 154, in run >>>>>>> step.run() >>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", >>>>>>> line 60, in run >>>>>>> function() >>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py", >>>>>>> line 294, in waitForHostUp >>>>>>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5) >>>>>>> File "/usr/share/ovirt-engine/**scripts/common_utils.py", line >>>>>>> 1009, in retry >>>>>>> raise e >>>>>>> RetryFailException: Error: Host was found in a 'Failed' state. >>>>>>> Please check engine and bootstrap installation logs. >>>>>>> >>>>>>> Thnkz for attention. >>>>>>> >>>>>>> Marcelo Barbosa >>>>>>> mr.marcelo.barbosa(a)gmail.com >>>>>>> >>>>>>> >>>>>>> >>>>>> ______________________________**_________________ >>>>>> Users mailing list >>>>>> Users(a)ovirt.org >>>>>> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org... >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>>> >>> >> >> >> > >