12:08 p.m.
hey
thanks for the answer.
1. where exactly do i see the state of the host
2. I did as you instructed. the setup fails exactly at the same step (I
changed the timeout to 600, shut down networkmanager and connected via dhcp
over ethernet.
2. I manually configured as following
/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
DEVICE=ovirtmgmt
TYPE=Bridge
ONBOOT=yes
DELAY=0
BOOTPROTO=dhcp
NM_CONTROLLED="no
and added
BRIDGE=ovirtmgmt
to the ifcfg-eth0
restarting the network service fails with a status error
RTNETLINK answers: File exists.
thanks
On Mon, Jun 18, 2012 at 11:21 AM, Ofer Schreiber <oschreib(a)redhat.com>wrote:
>
> the bootstrap logs are also available
> here they are.
> thanks.
1. If you log into the GUI, in which state is the host?
2. From the engine.log, I can see that the host installation went fine,
and it seems that the host is in "Non-Operetional state).
- I can see clearly in the log :"Host local_host is set to
Non-Operational, it is missing the following networks: ovirtmgmt"
3. in the vds_bootstrap.498578.log you can see "ERROR _getBridgeParams:
failed to read params of file /etc/sysconfig/network-scripts/ifcfg-wlan0."
- it seems that something is wrong with your networking configuration
4. Probably the timeout during all-in-one installation (150 seconds) is
too low for you.
Two options for you:
1. Clean everything (using engine-cleanup), fix you networking settings
(disable NetworkManager, use non wireless conntection) and rerun
engine-setup (with higher timeout in
/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py)
2. Just create the ovirtmgmt network bridge by your self, and restart vdsm.
>
>
>
> On Mon, Jun 18, 2012 at 10:40 AM, Ofer Schreiber <
> oschreib(a)redhat.com > wrote:
>
>
>
>
>
> ----- Original Message -----
> >
> > The log is attached.
> >
> > thanks
>
> I'm missing the vds_bootstrap* logs. are they available?
> if not, if you log into the GUI, in which state the host is currently
> at?
>
> (/var/log/ovirt-enging/*log might help as well)
>
>
>
> >
> >
> >
> > On Mon, Jun 18, 2012 at 10:26 AM, Ofer Schreiber <
> > oschreib(a)redhat.com > wrote:
> >
> >
> > It seems that the host is currently in "installing" state.
> > Could you please take a look (or attach us) the vdsm installation
> > logs under /tmp?
> > (/tmp/vds_*)
> >
> >
> >
> > ----- Original Message -----
> > >
> > > Hello.
> > >
> > > I'm experiencing a problem during installation of the ovirt
> > > engine
> > > including the all-in-one plugin
> > > The setup exists during the stage "Adding local host" - it
quits
> > > due
> > > to a "time out while waiting for the host to start"
> > > I've attached some info (including the setup's log) and will
> > > gladly
> > > provide more information if necessary.
> > >
> > > Many thanks,
> > >
> > > Ohad
> > >
> > >
> >
> >
>
>