Re: [Users] How to add internal networks
Hi,
You have to define logical networks (in datacenter and assign to
cluster) and configure these logical networks on your host (using hosts
- network interfaces subtab).
When using multiple logical networks on 1 physical nic you will need
most likely VLAN tagging, as all vm networks are configured as a bridge
in oVirt.
See the following 2 links on how to tag your ovirtmgmt interface:
http://lists.ovirt.org/pipermail/users/2013-May/014286.html
http://lists.ovirt.org/pipermail/users/2013-May/014297.html
Hope this helps.
--
Best Regards
René Koch
Senior Solution Architect
============================================
ovido gmbh - "Das Linux Systemhaus"
Brünner Stra03 163, A-1210 Wien
Phone: +43 720 / 530 670
Mobile: +43 660 / 512 21 31
E-Mail: r.koch(a)ovido.at
============================================
On 05/13/2013 08:36 AM, Frank Wall wrote:
Hi,
I'm using oVirt 3.2 on a single hosts with only one NIC. Currently
there is only the ovirtmgmt network configured. But I need to add
more networks, especially some internal networks like 192.168.x.y/24
need to be usable for VMs.
From the oVirt Admin Portal this does not seem to be possible. It
seems I cannot reuse the ovirtmgmt interface for any other network.
Is this true? How am I supposed to add several networks in oVirt if
I have just one NIC?
Thanks
- Frank
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users